diff options
Diffstat (limited to 'drivers/usb/core/hcd-pci.c')
| -rw-r--r-- | drivers/usb/core/hcd-pci.c | 117 |
1 files changed, 27 insertions, 90 deletions
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 507741e..c54fc40 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } pci_set_master(dev); - device_set_wakeup_enable(&dev->dev, 1); retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) @@ -201,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) struct usb_hcd *hcd = pci_get_drvdata(dev); int retval = 0; int wake, w; + int has_pci_pm; /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface @@ -230,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) synchronize_irq(dev->irq); + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. + */ + pci_disable_device(dev); + + pci_save_state(dev); + /* Don't fail on error to enable wakeup. We rely on pci code * to reject requests the hardware can't implement, rather * than coding the same thing. @@ -241,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) wake = w; dev_dbg(&dev->dev, "wakeup: %d\n", wake); - /* Downstream ports from this root hub should already be quiesced, so - * there will be no DMA activity. Now we can shut down the upstream - * link (except maybe for PME# resume signaling) and enter some PCI - * low power state, if the hardware allows. - */ - pci_disable_device(dev); - done: - return retval; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); - -/** - * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled - * @dev: USB Host Controller being suspended - * @message: Power Management message describing this state transition - * - * Store this function in the HCD's struct pci_driver as .suspend_late. - */ -int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) -{ - int retval = 0; - int has_pci_pm; - - /* We might already be suspended (runtime PM -- not yet written) */ - if (dev->current_state != PCI_D0) - goto done; - - pci_save_state(dev); - /* Don't change state if we don't need to */ if (message.event == PM_EVENT_FREEZE || message.event == PM_EVENT_PRETHAW) { @@ -315,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) done: return retval; } -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); +EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled @@ -325,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); */ int usb_hcd_pci_resume_early(struct pci_dev *dev) { - int retval = 0; - pci_power_t state = dev->current_state; - -#ifdef CONFIG_PPC_PMAC - /* Reenable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 1); - } -#endif - - /* NOTE: chip docs cover clean "real suspend" cases (what Linux - * calls "standby", "suspend to RAM", and so on). There are also - * dirty cases when swsusp fakes a suspend in "shutdown" mode. - */ - if (state != PCI_D0) { -#ifdef DEBUG - int pci_pm; - u16 pmcr; - - pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr); - pmcr &= PCI_PM_CTRL_STATE_MASK; - if (pmcr) { - /* Clean case: power to USB and to HC registers was - * maintained; remote wakeup is easy. - */ - dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr); - } else { - /* Clean: HC lost Vcc power, D0 uninitialized - * + Vaux may have preserved port and transceiver - * state ... for remote wakeup from D3cold - * + or not; HCD must reinit + re-enumerate - * - * Dirty: D0 semi-initialized cases with swsusp - * + after BIOS init - * + after Linux init (HCD statically linked) - */ - dev_dbg(&dev->dev, "resume from previous PCI D%d\n", - state); - } -#endif - - retval = pci_set_power_state(dev, PCI_D0); - } else { - /* Same basic cases: clean (powered/not), dirty */ - dev_dbg(&dev->dev, "PCI legacy resume\n"); - } - - if (retval < 0) - dev_err(&dev->dev, "can't resume: %d\n", retval); - else - pci_restore_state(dev); - - return retval; + pci_restore_state(dev); + return 0; } EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); @@ -398,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev) struct usb_hcd *hcd; int retval; +#ifdef CONFIG_PPC_PMAC + /* Reenable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, 1); + } +#endif + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, @@ -405,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) return 0; } + pci_enable_wake(dev, PCI_D0, false); + retval = pci_enable_device(dev); if (retval < 0) { dev_err(&dev->dev, "can't re-enable after resume, %d!\n", |
