diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/atmel_serial.c | 49 |
1 files changed, 31 insertions, 18 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a49f10d..91c0d88 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -35,21 +35,18 @@ #include <linux/platform_device.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/dma-mapping.h> #include <linux/atmel_pdc.h> #include <linux/atmel_serial.h> #include <linux/uaccess.h> #include <linux/platform_data/atmel.h> #include <linux/timer.h> +#include <linux/gpio.h> #include <asm/io.h> #include <asm/ioctls.h> -#ifdef CONFIG_ARM -#include <mach/cpu.h> -#include <asm/gpio.h> -#endif - #define PDC_BUFFER_SIZE 512 /* Revisit: We should calculate this based on the actual port settings */ #define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ @@ -168,6 +165,7 @@ struct atmel_uart_port { struct circ_buf rx_ring; struct serial_rs485 rs485; /* rs485 settings */ + int rts_gpio; /* optional RTS GPIO */ unsigned int tx_done_mask; bool is_usart; /* usart or uart */ struct timer_list uart_timer; /* uart timer */ @@ -301,20 +299,16 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) unsigned int mode; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); -#ifdef CONFIG_ARCH_AT91RM9200 - if (cpu_is_at91rm9200()) { - /* - * AT91RM9200 Errata #39: RTS0 is not internally connected - * to PA21. We need to drive the pin manually. - */ - if (port->mapbase == AT91RM9200_BASE_US0) { - if (mctrl & TIOCM_RTS) - at91_set_gpio_value(AT91_PIN_PA21, 0); - else - at91_set_gpio_value(AT91_PIN_PA21, 1); - } + /* + * AT91RM9200 Errata #39: RTS0 is not internally connected + * to PA21. We need to drive the pin as a GPIO. + */ + if (gpio_is_valid(atmel_port->rts_gpio)) { + if (mctrl & TIOCM_RTS) + gpio_set_value(atmel_port->rts_gpio, 0); + else + gpio_set_value(atmel_port->rts_gpio, 1); } -#endif if (mctrl & TIOCM_RTS) control |= ATMEL_US_RTSEN; @@ -2389,6 +2383,25 @@ static int atmel_serial_probe(struct platform_device *pdev) port = &atmel_ports[ret]; port->backup_imr = 0; port->uart.line = ret; + port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */ + if (pdata) + port->rts_gpio = pdata->rts_gpio; + else if (np) + port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0); + + if (gpio_is_valid(port->rts_gpio)) { + ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS"); + if (ret) { + dev_err(&pdev->dev, "error requesting RTS GPIO\n"); + goto err; + } + /* Default to 1 as RTS is active low */ + ret = gpio_direction_output(port->rts_gpio, 1); + if (ret) { + dev_err(&pdev->dev, "error setting up RTS GPIO\n"); + goto err; + } + } ret = atmel_init_port(port, pdev); if (ret) |