summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250.c8
-rw-r--r--drivers/tty/serial/amba-pl011.c2
-rw-r--r--drivers/tty/serial/imx.c6
-rw-r--r--drivers/tty/serial/mxs-auart.c42
-rw-r--r--drivers/tty/serial/of_serial.c1
-rw-r--r--drivers/tty/serial/pch_uart.c59
-rw-r--r--drivers/tty/serial/samsung.c4
-rw-r--r--drivers/tty/serial/serial_core.c6
-rw-r--r--drivers/tty/serial/sh-sci.c8
9 files changed, 101 insertions, 35 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 6e1958a..8123f78 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -282,6 +282,14 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
},
+ [PORT_LPC3220] = {
+ .name = "LPC3220",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
+ UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c17923e..d3553b5 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -53,9 +53,9 @@
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/sizes.h>
#include <asm/io.h>
-#include <asm/sizes.h>
#define UART_NR 14
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 4ef7473..d5c689d6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -169,7 +169,6 @@
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
#define DEV_NAME "ttymxc"
-#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
/*
* This determines how often we check the modem status signals
@@ -741,10 +740,7 @@ static int imx_startup(struct uart_port *port)
/* do not use RTS IRQ on IrDA */
if (!USE_IRDA(sport)) {
- retval = request_irq(sport->rtsirq, imx_rtsint,
- (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
- IRQF_TRIGGER_FALLING |
- IRQF_TRIGGER_RISING,
+ retval = request_irq(sport->rtsirq, imx_rtsint, 0,
DRIVER_NAME, sport);
if (retval)
goto error_out3;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index ec56d83..2e341b8 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/of_device.h>
#include <asm/cacheflush.h>
@@ -675,6 +676,30 @@ static struct uart_driver auart_driver = {
#endif
};
+/*
+ * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
+ * could successfully get all information from dt or a negative errno.
+ */
+static int serial_mxs_probe_dt(struct mxs_auart_port *s,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np)
+ /* no device tree device */
+ return 1;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
+ return ret;
+ }
+ s->port.line = ret;
+
+ return 0;
+}
+
static int __devinit mxs_auart_probe(struct platform_device *pdev)
{
struct mxs_auart_port *s;
@@ -689,6 +714,12 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
goto out;
}
+ ret = serial_mxs_probe_dt(s, pdev);
+ if (ret > 0)
+ s->port.line = pdev->id < 0 ? 0 : pdev->id;
+ else if (ret < 0)
+ goto out_free;
+
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
@@ -711,7 +742,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
s->port.membase = ioremap(r->start, resource_size(r));
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
- s->port.line = pdev->id < 0 ? 0 : pdev->id;
s->port.fifosize = 16;
s->port.uartclk = clk_get_rate(s->clk);
s->port.type = PORT_IMX;
@@ -728,7 +758,7 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, s);
- auart_port[pdev->id] = s;
+ auart_port[s->port.line] = s;
mxs_auart_reset(&s->port);
@@ -769,12 +799,19 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev)
return 0;
}
+static struct of_device_id mxs_auart_dt_ids[] = {
+ { .compatible = "fsl,imx23-auart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
static struct platform_driver mxs_auart_driver = {
.probe = mxs_auart_probe,
.remove = __devexit_p(mxs_auart_remove),
.driver = {
.name = "mxs-auart",
.owner = THIS_MODULE,
+ .of_match_table = mxs_auart_dt_ids,
},
};
@@ -807,3 +844,4 @@ module_init(mxs_auart_init);
module_exit(mxs_auart_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Freescale MXS application uart driver");
+MODULE_ALIAS("platform:mxs-auart");
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 5410c06..34e7187 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -208,6 +208,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = {
{ .compatible = "ns16750", .data = (void *)PORT_16750, },
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
+ { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4fdec6a6..558ce85 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -253,6 +253,9 @@ struct eg20t_port {
dma_addr_t rx_buf_dma;
struct dentry *debugfs;
+
+ /* protect the eg20t_port private structure and io access to membase */
+ spinlock_t lock;
};
/**
@@ -754,7 +757,8 @@ static void pch_dma_rx_complete(void *arg)
tty_flip_buffer_push(tty);
tty_kref_put(tty);
async_tx_ack(priv->desc_rx);
- pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
}
static void pch_dma_tx_complete(void *arg)
@@ -809,7 +813,8 @@ static int handle_rx_to(struct eg20t_port *priv)
int rx_size;
int ret;
if (!priv->start_rx) {
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
return 0;
}
buf = &priv->rxbuf;
@@ -1058,7 +1063,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
int next = 1;
u8 msr;
- spin_lock_irqsave(&priv->port.lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
handled = 0;
while (next) {
iid = pch_uart_hal_get_iid(priv);
@@ -1078,11 +1083,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
case PCH_UART_IID_RDR: /* Received Data Ready */
if (priv->use_dma) {
pch_uart_hal_disable_interrupt(priv,
- PCH_UART_HAL_RX_INT);
+ PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
ret = dma_handle_rx(priv);
if (!ret)
pch_uart_hal_enable_interrupt(priv,
- PCH_UART_HAL_RX_INT);
+ PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
} else {
ret = handle_rx(priv);
}
@@ -1116,7 +1123,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
handled |= (unsigned int)ret;
}
- spin_unlock_irqrestore(&priv->port.lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
return IRQ_RETVAL(handled);
}
@@ -1208,7 +1215,8 @@ static void pch_uart_stop_rx(struct uart_port *port)
struct eg20t_port *priv;
priv = container_of(port, struct eg20t_port, port);
priv->start_rx = 0;
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
}
/* Enable the modem status interrupts. */
@@ -1226,9 +1234,9 @@ static void pch_uart_break_ctl(struct uart_port *port, int ctl)
unsigned long flags;
priv = container_of(port, struct eg20t_port, port);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
pch_uart_hal_set_break(priv, ctl);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
/* Grab any interrupt resources and initialise any low level driver state. */
@@ -1263,6 +1271,7 @@ static int pch_uart_startup(struct uart_port *port)
break;
case 16:
fifo_size = PCH_UART_HAL_FIFO16;
+ break;
case 1:
default:
fifo_size = PCH_UART_HAL_FIFO_DIS;
@@ -1300,7 +1309,8 @@ static int pch_uart_startup(struct uart_port *port)
pch_request_dma(port);
priv->start_rx = 1;
- pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
uart_update_timeout(port, CS8, default_baud);
return 0;
@@ -1358,7 +1368,7 @@ static void pch_uart_set_termios(struct uart_port *port,
stb = PCH_UART_HAL_STB1;
if (termios->c_cflag & PARENB) {
- if (!(termios->c_cflag & PARODD))
+ if (termios->c_cflag & PARODD)
parity = PCH_UART_HAL_PARITY_ODD;
else
parity = PCH_UART_HAL_PARITY_EVEN;
@@ -1376,7 +1386,8 @@ static void pch_uart_set_termios(struct uart_port *port,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
+ spin_lock(&port->lock);
uart_update_timeout(port, termios->c_cflag, baud);
rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
@@ -1389,7 +1400,8 @@ static void pch_uart_set_termios(struct uart_port *port,
tty_termios_encode_baud_rate(termios, baud, baud);
out:
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
static const char *pch_uart_type(struct uart_port *port)
@@ -1538,8 +1550,9 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
{
struct eg20t_port *priv;
unsigned long flags;
+ int priv_locked = 1;
+ int port_locked = 1;
u8 ier;
- int locked = 1;
priv = pch_uart_ports[co->index];
@@ -1547,12 +1560,16 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
local_irq_save(flags);
if (priv->port.sysrq) {
- /* serial8250_handle_port() already took the lock */
- locked = 0;
+ spin_lock(&priv->lock);
+ /* serial8250_handle_port() already took the port lock */
+ port_locked = 0;
} else if (oops_in_progress) {
- locked = spin_trylock(&priv->port.lock);
- } else
+ priv_locked = spin_trylock(&priv->lock);
+ port_locked = spin_trylock(&priv->port.lock);
+ } else {
+ spin_lock(&priv->lock);
spin_lock(&priv->port.lock);
+ }
/*
* First save the IER then disable the interrupts
@@ -1570,8 +1587,10 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
wait_for_xmitr(priv, BOTH_EMPTY);
iowrite8(ier, priv->membase + UART_IER);
- if (locked)
+ if (port_locked)
spin_unlock(&priv->port.lock);
+ if (priv_locked)
+ spin_unlock(&priv->lock);
local_irq_restore(flags);
}
@@ -1669,6 +1688,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
pci_enable_msi(pdev);
pci_set_master(pdev);
+ spin_lock_init(&priv->lock);
+
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
priv->mapbase = mapbase;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index d8b0aee..02d07bf 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1014,10 +1014,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
* a disturbance in the clock-rate over the change.
*/
- if (IS_ERR(port->clk))
+ if (IS_ERR(port->baudclk))
goto exit;
- if (port->baudclk_rate == clk_get_rate(port->clk))
+ if (port->baudclk_rate == clk_get_rate(port->baudclk))
goto exit;
if (val == CPUFREQ_PRECHANGE) {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 246b823..a21dc8e 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2527,14 +2527,16 @@ void uart_insert_char(struct uart_port *port, unsigned int status,
struct tty_struct *tty = port->state->port.tty;
if ((status & port->ignore_status_mask & ~overrun) == 0)
- tty_insert_flip_char(tty, ch, flag);
+ if (tty_insert_flip_char(tty, ch, flag) == 0)
+ ++port->icount.buf_overrun;
/*
* Overrun is special. Since it's reported immediately,
* it doesn't affect the current character.
*/
if (status & ~port->ignore_status_mask & overrun)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ if (tty_insert_flip_char(tty, 0, TTY_OVERRUN) == 0)
+ ++port->icount.buf_overrun;
}
EXPORT_SYMBOL_GPL(uart_insert_char);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1bd9163..d4d8c94 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1615,9 +1615,9 @@ static bool filter(struct dma_chan *chan, void *slave)
struct sh_dmae_slave *param = slave;
dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
- param->slave_id);
+ param->shdma_slave.slave_id);
- chan->private = param;
+ chan->private = &param->shdma_slave;
return true;
}
@@ -1656,7 +1656,7 @@ static void sci_request_dma(struct uart_port *port)
param = &s->param_tx;
/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
- param->slave_id = s->cfg->dma_slave_tx;
+ param->shdma_slave.slave_id = s->cfg->dma_slave_tx;
s->cookie_tx = -EINVAL;
chan = dma_request_channel(mask, filter, param);
@@ -1684,7 +1684,7 @@ static void sci_request_dma(struct uart_port *port)
param = &s->param_rx;
/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
- param->slave_id = s->cfg->dma_slave_rx;
+ param->shdma_slave.slave_id = s->cfg->dma_slave_rx;
chan = dma_request_channel(mask, filter, param);
dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
OpenPOWER on IntegriCloud