diff options
Diffstat (limited to 'drivers/tty/serial/serial_core.c')
-rw-r--r-- | drivers/tty/serial/serial_core.c | 138 |
1 files changed, 51 insertions, 87 deletions
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 9fc1533..240d3e7 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -235,18 +235,9 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, if (tty_port_initialized(port)) return 0; - /* - * Set the TTY IO error marker - we will only clear this - * once we have successfully opened the port. - */ - set_bit(TTY_IO_ERROR, &tty->flags); - retval = uart_port_startup(tty, state, init_hw); - if (!retval) { - tty_port_set_initialized(port, 1); - clear_bit(TTY_IO_ERROR, &tty->flags); - } else if (retval > 0) - retval = 0; + if (retval) + set_bit(TTY_IO_ERROR, &tty->flags); return retval; } @@ -972,8 +963,11 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, } uart_change_speed(tty, state, NULL); } - } else + } else { retval = uart_startup(tty, state, 1); + if (retval > 0) + retval = 0; + } exit: return retval; } @@ -1139,6 +1133,8 @@ static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) uport->ops->config_port(uport, flags); ret = uart_startup(tty, state, 1); + if (ret > 0) + ret = 0; } out: mutex_unlock(&port->mutex); @@ -1465,7 +1461,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp) { struct uart_state *state = tty->driver_data; struct tty_port *port; - struct uart_port *uport; if (!state) { struct uart_driver *drv = tty->driver->driver_state; @@ -1481,56 +1476,36 @@ static void uart_close(struct tty_struct *tty, struct file *filp) port = &state->port; pr_debug("uart_close(%d) called\n", tty->index); - if (tty_port_close_start(port, tty, filp) == 0) - return; + tty_port_close(tty->port, tty, filp); +} - mutex_lock(&port->mutex); - uport = uart_port_check(state); +static void uart_tty_port_shutdown(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = uart_port_check(state); + spin_lock_irq(&uport->lock); /* * At this point, we stop accepting input. To do this, we * disable the receive line status interrupts. */ - if (tty_port_initialized(port) && - !WARN(!uport, "detached port still initialized!\n")) { - spin_lock_irq(&uport->lock); - uport->ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - uart_wait_until_sent(tty, uport->timeout); - } + WARN(!uport, "detached port still initialized!\n"); - uart_shutdown(tty, state); - tty_port_tty_set(port, NULL); + uport->ops->stop_rx(uport); - spin_lock_irq(&port->lock); + spin_unlock_irq(&uport->lock); - if (port->blocked_open) { - spin_unlock_irq(&port->lock); - if (port->close_delay) - msleep_interruptible(jiffies_to_msecs(port->close_delay)); - spin_lock_irq(&port->lock); - } else if (uport && !uart_console(uport)) { - spin_unlock_irq(&port->lock); - uart_change_pm(state, UART_PM_STATE_OFF); - spin_lock_irq(&port->lock); - } - spin_unlock_irq(&port->lock); - tty_port_set_active(port, 0); + uart_port_shutdown(port); /* - * Wake up anyone trying to open this port. + * It's possible for shutdown to be called after suspend if we get + * a DCD drop (hangup) at just the right time. Clear suspended bit so + * we don't try to resume a port that has been shutdown. */ - wake_up_interruptible(&port->open_wait); + tty_port_set_suspended(port, 0); - mutex_unlock(&port->mutex); + uart_change_pm(state, UART_PM_STATE_OFF); - tty_ldisc_flush(tty); - tty->closing = 0; } static void uart_wait_until_sent(struct tty_struct *tty, int timeout) @@ -1711,52 +1686,31 @@ static int uart_open(struct tty_struct *tty, struct file *filp) struct uart_driver *drv = tty->driver->driver_state; int retval, line = tty->index; struct uart_state *state = drv->state + line; - struct tty_port *port = &state->port; - struct uart_port *uport; - pr_debug("uart_open(%d) called\n", line); + tty->driver_data = state; - spin_lock_irq(&port->lock); - ++port->count; - spin_unlock_irq(&port->lock); + retval = tty_port_open(&state->port, tty, filp); + if (retval > 0) + retval = 0; - /* - * We take the semaphore here to guarantee that we won't be re-entered - * while allocating the state structure, or while we request any IRQs - * that the driver may need. This also has the nice side-effect that - * it delays the action of uart_hangup, so we can guarantee that - * state->port.tty will always contain something reasonable. - */ - if (mutex_lock_interruptible(&port->mutex)) { - retval = -ERESTARTSYS; - goto end; - } + return retval; +} + +static int uart_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport; uport = uart_port_check(state); - if (!uport || uport->flags & UPF_DEAD) { - retval = -ENXIO; - goto err_unlock; - } + if (!uport || uport->flags & UPF_DEAD) + return -ENXIO; - tty->driver_data = state; - uport->state = state; port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; - tty_port_tty_set(port, tty); /* * Start up the serial port. */ - retval = uart_startup(tty, state, 0); - - /* - * If we succeeded, wait until the port is ready. - */ -err_unlock: - mutex_unlock(&port->mutex); - if (retval == 0) - retval = tty_port_block_til_ready(port, tty, filp); -end: - return retval; + return uart_startup(tty, state, 0); } static const char *uart_type(struct uart_port *port) @@ -1938,11 +1892,14 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * console=<name>,0x<addr>,<options> * is also accepted; the returned @iotype will be UPIO_MEM. * - * Returns 0 on success or -EINVAL on failure + * Returns 0 on success, -EINVAL or -ERANGE on failure */ -int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, +int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr, char **options) { + int ret; + unsigned long long tmp; + if (strncmp(p, "mmio,", 5) == 0) { *iotype = UPIO_MEM; p += 5; @@ -1968,7 +1925,10 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, return -EINVAL; } - *addr = simple_strtoul(p, NULL, 0); + ret = kstrtoull(p, 0, &tmp); + if (ret) + return ret; + *addr = tmp; p = strchr(p, ','); if (p) p++; @@ -2470,6 +2430,8 @@ static const struct tty_operations uart_ops = { static const struct tty_port_operations uart_port_ops = { .carrier_raised = uart_carrier_raised, .dtr_rts = uart_dtr_rts, + .activate = uart_port_activate, + .shutdown = uart_tty_port_shutdown, }; /** @@ -2786,6 +2748,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) uport->cons = drv->cons; uport->minor = drv->tty_driver->minor_start + uport->line; + port->console = uart_console(uport); + /* * If this port is a console, then the spinlock is already * initialised. |