diff options
Diffstat (limited to 'drivers/tty/serial/msm_serial.c')
| -rw-r--r-- | drivers/tty/serial/msm_serial.c | 111 |
1 files changed, 58 insertions, 53 deletions
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 4b6c783..d1bc6b6 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -54,6 +54,7 @@ struct msm_port { unsigned int imr; int is_uartdm; unsigned int old_snap_state; + bool break_detected; }; static inline void wait_for_xmitr(struct uart_port *port) @@ -126,23 +127,38 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr) while (count > 0) { unsigned char buf[4]; + int sysrq, r_count, i; sr = msm_read(port, UART_SR); if ((sr & UART_SR_RX_READY) == 0) { msm_port->old_snap_state -= count; break; } + ioread32_rep(port->membase + UARTDM_RF, buf, 1); - if (sr & UART_SR_RX_BREAK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (sr & UART_SR_PAR_FRAME_ERR) - port->icount.frame++; + r_count = min_t(int, count, sizeof(buf)); - /* TODO: handle sysrq */ - tty_insert_flip_string(tport, buf, min(count, 4)); - count -= 4; + for (i = 0; i < r_count; i++) { + char flag = TTY_NORMAL; + + if (msm_port->break_detected && buf[i] == 0) { + port->icount.brk++; + flag = TTY_BREAK; + msm_port->break_detected = false; + if (uart_handle_break(port)) + continue; + } + + if (!(port->read_status_mask & UART_SR_RX_BREAK)) + flag = TTY_NORMAL; + + spin_unlock(&port->lock); + sysrq = uart_handle_sysrq_char(port, buf[i]); + spin_lock(&port->lock); + if (!sysrq) + tty_insert_flip_char(tport, buf[i], flag); + } + count -= r_count; } spin_unlock(&port->lock); @@ -174,6 +190,7 @@ static void handle_rx(struct uart_port *port) while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) { unsigned int c; char flag = TTY_NORMAL; + int sysrq; c = msm_read(port, UART_RF); @@ -195,7 +212,10 @@ static void handle_rx(struct uart_port *port) else if (sr & UART_SR_PAR_FRAME_ERR) flag = TTY_FRAME; - if (!uart_handle_sysrq_char(port, c)) + spin_unlock(&port->lock); + sysrq = uart_handle_sysrq_char(port, c); + spin_lock(&port->lock); + if (!sysrq) tty_insert_flip_char(tport, c, flag); } @@ -287,6 +307,11 @@ static irqreturn_t msm_irq(int irq, void *dev_id) misr = msm_read(port, UART_MISR); msm_write(port, 0, UART_IMR); /* disable interrupt */ + if (misr & UART_IMR_RXBREAK_START) { + msm_port->break_detected = true; + msm_write(port, UART_CR_CMD_RESET_RXBREAK_START, UART_CR); + } + if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) { if (msm_port->is_uartdm) handle_rx_dm(port, misr); @@ -402,9 +427,6 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) entry = msm_find_best_baud(port, baud); - if (msm_port->is_uartdm) - msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); - msm_write(port, entry->code, UART_CSR); /* RX stale watermark */ @@ -421,6 +443,18 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) /* set TX watermark */ msm_write(port, 10, UART_TFWR); + msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR); + msm_reset(port); + + /* Enable RX and TX */ + msm_write(port, UART_CR_TX_ENABLE | UART_CR_RX_ENABLE, UART_CR); + + /* turn on RX and CTS interrupts */ + msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | + UART_IMR_CURRENT_CTS | UART_IMR_RXBREAK_START; + + msm_write(port, msm_port->imr, UART_IMR); + if (msm_port->is_uartdm) { msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); msm_write(port, 0xFFFFFF, UARTDM_DMRX); @@ -467,40 +501,6 @@ static int msm_startup(struct uart_port *port) data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2); data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; msm_write(port, data, UART_MR1); - - /* make sure that RXSTALE count is non-zero */ - data = msm_read(port, UART_IPR); - if (unlikely(!data)) { - data |= UART_IPR_RXSTALE_LAST; - data |= UART_IPR_STALE_LSB; - msm_write(port, data, UART_IPR); - } - - data = 0; - if (!port->cons || (port->cons && !(port->cons->flags & CON_ENABLED))) { - msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR); - msm_reset(port); - data = UART_CR_TX_ENABLE; - } - - data |= UART_CR_RX_ENABLE; - msm_write(port, data, UART_CR); /* enable TX & RX */ - - /* Make sure IPR is not 0 to start with*/ - if (msm_port->is_uartdm) - msm_write(port, UART_IPR_STALE_LSB, UART_IPR); - - /* turn on RX and CTS interrupts */ - msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | - UART_IMR_CURRENT_CTS; - - if (msm_port->is_uartdm) { - msm_write(port, 0xFFFFFF, UARTDM_DMRX); - msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); - msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); - } - - msm_write(port, msm_port->imr, UART_IMR); return 0; } @@ -1044,17 +1044,22 @@ static int msm_serial_probe(struct platform_device *pdev) struct resource *resource; struct uart_port *port; const struct of_device_id *id; - int irq; + int irq, line; + + if (pdev->dev.of_node) + line = of_alias_get_id(pdev->dev.of_node, "serial"); + else + line = pdev->id; - if (pdev->id == -1) - pdev->id = atomic_inc_return(&msm_uart_next_id) - 1; + if (line < 0) + line = atomic_inc_return(&msm_uart_next_id) - 1; - if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) + if (unlikely(line < 0 || line >= UART_NR)) return -ENXIO; - dev_info(&pdev->dev, "msm_serial: detected port #%d\n", pdev->id); + dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line); - port = get_port_from_line(pdev->id); + port = get_port_from_line(line); port->dev = &pdev->dev; msm_port = UART_TO_MSM(port); |
