summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/apbuart.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/apbuart.h')
-rw-r--r--drivers/tty/serial/apbuart.h64
1 files changed, 64 insertions, 0 deletions
diff --git a/drivers/tty/serial/apbuart.h b/drivers/tty/serial/apbuart.h
new file mode 100644
index 0000000..5faf87c
--- /dev/null
+++ b/drivers/tty/serial/apbuart.h
@@ -0,0 +1,64 @@
+#ifndef __GRLIB_APBUART_H__
+#define __GRLIB_APBUART_H__
+
+#include <asm/io.h>
+
+#define UART_NR 8
+static int grlib_apbuart_port_nr;
+
+struct grlib_apbuart_regs_map {
+ u32 data;
+ u32 status;
+ u32 ctrl;
+ u32 scaler;
+};
+
+struct amba_prom_registers {
+ unsigned int phys_addr;
+ unsigned int reg_size;
+};
+
+/*
+ * The following defines the bits in the APBUART Status Registers.
+ */
+#define UART_STATUS_DR 0x00000001 /* Data Ready */
+#define UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */
+#define UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */
+#define UART_STATUS_BR 0x00000008 /* Break Error */
+#define UART_STATUS_OE 0x00000010 /* RX Overrun Error */
+#define UART_STATUS_PE 0x00000020 /* RX Parity Error */
+#define UART_STATUS_FE 0x00000040 /* RX Framing Error */
+#define UART_STATUS_ERR 0x00000078 /* Error Mask */
+
+/*
+ * The following defines the bits in the APBUART Ctrl Registers.
+ */
+#define UART_CTRL_RE 0x00000001 /* Receiver enable */
+#define UART_CTRL_TE 0x00000002 /* Transmitter enable */
+#define UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */
+#define UART_CTRL_TI 0x00000008 /* Transmitter irq */
+#define UART_CTRL_PS 0x00000010 /* Parity select */
+#define UART_CTRL_PE 0x00000020 /* Parity enable */
+#define UART_CTRL_FL 0x00000040 /* Flow control enable */
+#define UART_CTRL_LB 0x00000080 /* Loopback enable */
+
+#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase))
+
+#define APBBASE_DATA_P(port) (&(APBBASE(port)->data))
+#define APBBASE_STATUS_P(port) (&(APBBASE(port)->status))
+#define APBBASE_CTRL_P(port) (&(APBBASE(port)->ctrl))
+#define APBBASE_SCALAR_P(port) (&(APBBASE(port)->scaler))
+
+#define UART_GET_CHAR(port) (__raw_readl(APBBASE_DATA_P(port)))
+#define UART_PUT_CHAR(port, v) (__raw_writel(v, APBBASE_DATA_P(port)))
+#define UART_GET_STATUS(port) (__raw_readl(APBBASE_STATUS_P(port)))
+#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port)))
+#define UART_GET_CTRL(port) (__raw_readl(APBBASE_CTRL_P(port)))
+#define UART_PUT_CTRL(port, v) (__raw_writel(v, APBBASE_CTRL_P(port)))
+#define UART_GET_SCAL(port) (__raw_readl(APBBASE_SCALAR_P(port)))
+#define UART_PUT_SCAL(port, v) (__raw_writel(v, APBBASE_SCALAR_P(port)))
+
+#define UART_RX_DATA(s) (((s) & UART_STATUS_DR) != 0)
+#define UART_TX_READY(s) (((s) & UART_STATUS_THE) != 0)
+
+#endif /* __GRLIB_APBUART_H__ */
OpenPOWER on IntegriCloud