summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/amba-pl011.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/amba-pl011.c')
-rw-r--r--drivers/tty/serial/amba-pl011.c181
1 files changed, 158 insertions, 23 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3ea5408..b2e9e17 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -29,6 +29,7 @@
* and hooked into this driver.
*/
+
#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
@@ -72,32 +73,44 @@
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
- unsigned int fifosize;
unsigned int lcrh_tx;
unsigned int lcrh_rx;
bool oversampling;
bool dma_threshold;
bool cts_event_workaround;
+
+ unsigned int (*get_fifosize)(unsigned int periphid);
};
+static unsigned int get_fifosize_arm(unsigned int periphid)
+{
+ unsigned int rev = (periphid >> 20) & 0xf;
+ return rev < 3 ? 16 : 32;
+}
+
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- .fifosize = 16,
.lcrh_tx = UART011_LCRH,
.lcrh_rx = UART011_LCRH,
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
+ .get_fifosize = get_fifosize_arm,
};
+static unsigned int get_fifosize_st(unsigned int periphid)
+{
+ return 64;
+}
+
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
- .fifosize = 64,
.lcrh_tx = ST_UART011_LCRH_TX,
.lcrh_rx = ST_UART011_LCRH_RX,
.oversampling = true,
.dma_threshold = true,
.cts_event_workaround = true,
+ .get_fifosize = get_fifosize_st,
};
static struct uart_amba_port *amba_ports[UART_NR];
@@ -117,6 +130,12 @@ struct pl011_dmarx_data {
struct pl011_sgbuf sgbuf_b;
dma_cookie_t cookie;
bool running;
+ struct timer_list timer;
+ unsigned int last_residue;
+ unsigned long last_jiffies;
+ bool auto_poll_rate;
+ unsigned int poll_rate;
+ unsigned int poll_timeout;
};
struct pl011_dmatx_data {
@@ -223,16 +242,18 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg,
enum dma_data_direction dir)
{
- sg->buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL);
+ dma_addr_t dma_addr;
+
+ sg->buf = dma_alloc_coherent(chan->device->dev,
+ PL011_DMA_BUFFER_SIZE, &dma_addr, GFP_KERNEL);
if (!sg->buf)
return -ENOMEM;
- sg_init_one(&sg->sg, sg->buf, PL011_DMA_BUFFER_SIZE);
+ sg_init_table(&sg->sg, 1);
+ sg_set_page(&sg->sg, phys_to_page(dma_addr),
+ PL011_DMA_BUFFER_SIZE, offset_in_page(dma_addr));
+ sg_dma_address(&sg->sg) = dma_addr;
- if (dma_map_sg(chan->device->dev, &sg->sg, 1, dir) != 1) {
- kfree(sg->buf);
- return -EINVAL;
- }
return 0;
}
@@ -240,8 +261,9 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
enum dma_data_direction dir)
{
if (sg->buf) {
- dma_unmap_sg(chan->device->dev, &sg->sg, 1, dir);
- kfree(sg->buf);
+ dma_free_coherent(chan->device->dev,
+ PL011_DMA_BUFFER_SIZE, sg->buf,
+ sg_dma_address(&sg->sg));
}
}
@@ -300,6 +322,29 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
dmaengine_slave_config(chan, &rx_conf);
uap->dmarx.chan = chan;
+ if (plat->dma_rx_poll_enable) {
+ /* Set poll rate if specified. */
+ if (plat->dma_rx_poll_rate) {
+ uap->dmarx.auto_poll_rate = false;
+ uap->dmarx.poll_rate = plat->dma_rx_poll_rate;
+ } else {
+ /*
+ * 100 ms defaults to poll rate if not
+ * specified. This will be adjusted with
+ * the baud rate at set_termios.
+ */
+ uap->dmarx.auto_poll_rate = true;
+ uap->dmarx.poll_rate = 100;
+ }
+ /* 3 secs defaults poll_timeout if not specified. */
+ if (plat->dma_rx_poll_timeout)
+ uap->dmarx.poll_timeout =
+ plat->dma_rx_poll_timeout;
+ else
+ uap->dmarx.poll_timeout = 3000;
+ } else
+ uap->dmarx.auto_poll_rate = false;
+
dev_info(uap->port.dev, "DMA channel RX %s\n",
dma_chan_name(uap->dmarx.chan));
}
@@ -701,24 +746,30 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
struct tty_port *port = &uap->port.state->port;
struct pl011_sgbuf *sgbuf = use_buf_b ?
&uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
- struct device *dev = uap->dmarx.chan->device->dev;
int dma_count = 0;
u32 fifotaken = 0; /* only used for vdbg() */
- /* Pick everything from the DMA first */
+ struct pl011_dmarx_data *dmarx = &uap->dmarx;
+ int dmataken = 0;
+
+ if (uap->dmarx.poll_rate) {
+ /* The data can be taken by polling */
+ dmataken = sgbuf->sg.length - dmarx->last_residue;
+ /* Recalculate the pending size */
+ if (pending >= dmataken)
+ pending -= dmataken;
+ }
+
+ /* Pick the remain data from the DMA */
if (pending) {
- /* Sync in buffer */
- dma_sync_sg_for_cpu(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE);
/*
* First take all chars in the DMA pipe, then look in the FIFO.
* Note that tty_insert_flip_buf() tries to take as many chars
* as it can.
*/
- dma_count = tty_insert_flip_string(port, sgbuf->buf, pending);
-
- /* Return buffer to device */
- dma_sync_sg_for_device(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE);
+ dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken,
+ pending);
uap->port.icount.rx += dma_count;
if (dma_count < pending)
@@ -726,6 +777,10 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
"couldn't insert all characters (TTY is full?)\n");
}
+ /* Reset the last_residue for Rx DMA poll */
+ if (uap->dmarx.poll_rate)
+ dmarx->last_residue = sgbuf->sg.length;
+
/*
* Only continue with trying to read the FIFO if all DMA chars have
* been taken first.
@@ -865,6 +920,57 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
writew(uap->dmacr, uap->port.membase + UART011_DMACR);
}
+/*
+ * Timer handler for Rx DMA polling.
+ * Every polling, It checks the residue in the dma buffer and transfer
+ * data to the tty. Also, last_residue is updated for the next polling.
+ */
+static void pl011_dma_rx_poll(unsigned long args)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)args;
+ struct tty_port *port = &uap->port.state->port;
+ struct pl011_dmarx_data *dmarx = &uap->dmarx;
+ struct dma_chan *rxchan = uap->dmarx.chan;
+ unsigned long flags = 0;
+ unsigned int dmataken = 0;
+ unsigned int size = 0;
+ struct pl011_sgbuf *sgbuf;
+ int dma_count;
+ struct dma_tx_state state;
+
+ sgbuf = dmarx->use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
+ rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state);
+ if (likely(state.residue < dmarx->last_residue)) {
+ dmataken = sgbuf->sg.length - dmarx->last_residue;
+ size = dmarx->last_residue - state.residue;
+ dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken,
+ size);
+ if (dma_count == size)
+ dmarx->last_residue = state.residue;
+ dmarx->last_jiffies = jiffies;
+ }
+ tty_flip_buffer_push(port);
+
+ /*
+ * If no data is received in poll_timeout, the driver will fall back
+ * to interrupt mode. We will retrigger DMA at the first interrupt.
+ */
+ if (jiffies_to_msecs(jiffies - dmarx->last_jiffies)
+ > uap->dmarx.poll_timeout) {
+
+ spin_lock_irqsave(&uap->port.lock, flags);
+ pl011_dma_rx_stop(uap);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+
+ uap->dmarx.running = false;
+ dmaengine_terminate_all(rxchan);
+ del_timer(&uap->dmarx.timer);
+ } else {
+ mod_timer(&uap->dmarx.timer,
+ jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
+ }
+}
+
static void pl011_dma_startup(struct uart_amba_port *uap)
{
int ret;
@@ -927,6 +1033,16 @@ skip_rx:
if (pl011_dma_rx_trigger_dma(uap))
dev_dbg(uap->port.dev, "could not trigger initial "
"RX DMA job, fall back to interrupt mode\n");
+ if (uap->dmarx.poll_rate) {
+ init_timer(&(uap->dmarx.timer));
+ uap->dmarx.timer.function = pl011_dma_rx_poll;
+ uap->dmarx.timer.data = (unsigned long)uap;
+ mod_timer(&uap->dmarx.timer,
+ jiffies +
+ msecs_to_jiffies(uap->dmarx.poll_rate));
+ uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE;
+ uap->dmarx.last_jiffies = jiffies;
+ }
}
}
@@ -962,6 +1078,8 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
/* Clean up the RX DMA */
pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, DMA_FROM_DEVICE);
pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_b, DMA_FROM_DEVICE);
+ if (uap->dmarx.poll_rate)
+ del_timer_sync(&uap->dmarx.timer);
uap->using_rx_dma = false;
}
}
@@ -976,7 +1094,6 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
return uap->using_rx_dma && uap->dmarx.running;
}
-
#else
/* Blank functions if the DMA engine is not available */
static inline void pl011_dma_probe(struct uart_amba_port *uap)
@@ -1088,8 +1205,20 @@ static void pl011_rx_chars(struct uart_amba_port *uap)
dev_dbg(uap->port.dev, "could not trigger RX DMA job "
"fall back to interrupt mode again\n");
uap->im |= UART011_RXIM;
- } else
+ } else {
uap->im &= ~UART011_RXIM;
+#ifdef CONFIG_DMA_ENGINE
+ /* Start Rx DMA poll */
+ if (uap->dmarx.poll_rate) {
+ uap->dmarx.last_jiffies = jiffies;
+ uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE;
+ mod_timer(&uap->dmarx.timer,
+ jiffies +
+ msecs_to_jiffies(uap->dmarx.poll_rate));
+ }
+#endif
+ }
+
writew(uap->im, uap->port.membase + UART011_IMSC);
}
spin_lock(&uap->port.lock);
@@ -1164,7 +1293,6 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
unsigned int dummy_read;
spin_lock_irqsave(&uap->port.lock, flags);
-
status = readw(uap->port.membase + UART011_MIS);
if (status) {
do {
@@ -1551,6 +1679,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
*/
baud = uart_get_baud_rate(port, termios, old, 0,
port->uartclk / clkdiv);
+#ifdef CONFIG_DMA_ENGINE
+ /*
+ * Adjust RX DMA polling rate with baud rate if not specified.
+ */
+ if (uap->dmarx.auto_poll_rate)
+ uap->dmarx.poll_rate = DIV_ROUND_UP(10000000, baud);
+#endif
if (baud > port->uartclk/16)
quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
@@ -2010,7 +2145,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
uap->old_cr = 0;
- uap->fifosize = vendor->fifosize;
+ uap->fifosize = vendor->get_fifosize(dev->periphid);
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
OpenPOWER on IntegriCloud