1 files changed, 80 insertions, 80 deletions

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index a0d114d..7898295 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -1287,7 +1287,7 @@ static void serial8250_start_tx(struct uart_port *port)
 
 	if (!(up->ier & UART_IER_THRI)) {
 		up->ier |= UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
+		serial_port_out(port, UART_IER, up->ier);
 
 		if (up->bugs & UART_BUG_TXEN) {
 			unsigned char lsr;
@@ -1316,7 +1316,7 @@ static void serial8250_stop_rx(struct uart_port *port)
 
 	up->ier &= ~UART_IER_RLSI;
 	up->port.read_status_mask &= ~UART_LSR_DR;
-	serial_out(up, UART_IER, up->ier);
+	serial_port_out(port, UART_IER, up->ier);
 }
 
 static void serial8250_enable_ms(struct uart_port *port)
@@ -1329,7 +1329,7 @@ static void serial8250_enable_ms(struct uart_port *port)
 		return;
 
 	up->ier |= UART_IER_MSI;
-	serial_out(up, UART_IER, up->ier);
+	serial_port_out(port, UART_IER, up->ier);
 }
 
 /*
@@ -1523,7 +1523,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	status = serial_in(up, UART_LSR);
+	status = serial_port_in(port, UART_LSR);
 
 	DEBUG_INTR("status = %x...", status);
 
@@ -1540,9 +1540,7 @@ EXPORT_SYMBOL_GPL(serial8250_handle_irq);
 
 static int serial8250_default_handle_irq(struct uart_port *port)
 {
-	struct uart_8250_port *up =
-		container_of(port, struct uart_8250_port, port);
-	unsigned int iir = serial_in(up, UART_IIR);
+	unsigned int iir = serial_port_in(port, UART_IIR);
 
 	return serial8250_handle_irq(port, iir);
 }
@@ -1776,7 +1774,7 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 	unsigned int lsr;
 
 	spin_lock_irqsave(&port->lock, flags);
-	lsr = serial_in(up, UART_LSR);
+	lsr = serial_port_in(port, UART_LSR);
 	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -1823,7 +1821,7 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 	mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
 
-	serial_out(up, UART_MCR, mcr);
+	serial_port_out(port, UART_MCR, mcr);
 }
 
 static void serial8250_break_ctl(struct uart_port *port, int break_state)
@@ -1837,7 +1835,7 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state)
 		up->lcr |= UART_LCR_SBC;
 	else
 		up->lcr &= ~UART_LCR_SBC;
-	serial_out(up, UART_LCR, up->lcr);
+	serial_port_out(port, UART_LCR, up->lcr);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -1883,14 +1881,12 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 
 static int serial8250_get_poll_char(struct uart_port *port)
 {
-	struct uart_8250_port *up =
-		container_of(port, struct uart_8250_port, port);
-	unsigned char lsr = serial_in(up, UART_LSR);
+	unsigned char lsr = serial_port_in(port, UART_LSR);
 
 	if (!(lsr & UART_LSR_DR))
 		return NO_POLL_CHAR;
 
-	return serial_in(up, UART_RX);
+	return serial_port_in(port, UART_RX);
 }
 
 
@@ -1904,21 +1900,21 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	/*
 	 *	First save the IER then disable the interrupts
 	 */
-	ier = serial_in(up, UART_IER);
+	ier = serial_port_in(port, UART_IER);
 	if (up->capabilities & UART_CAP_UUE)
-		serial_out(up, UART_IER, UART_IER_UUE);
+		serial_port_out(port, UART_IER, UART_IER_UUE);
 	else
-		serial_out(up, UART_IER, 0);
+		serial_port_out(port, UART_IER, 0);
 
 	wait_for_xmitr(up, BOTH_EMPTY);
 	/*
 	 *	Send the character out.
 	 *	If a LF, also do CR...
 	 */
-	serial_out(up, UART_TX, c);
+	serial_port_out(port, UART_TX, c);
 	if (c == 10) {
 		wait_for_xmitr(up, BOTH_EMPTY);
-		serial_out(up, UART_TX, 13);
+		serial_port_out(port, UART_TX, 13);
 	}
 
 	/*
@@ -1926,7 +1922,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	 *	and restore the IER
 	 */
 	wait_for_xmitr(up, BOTH_EMPTY);
-	serial_out(up, UART_IER, ier);
+	serial_port_out(port, UART_IER, ier);
 }
 
 #endif /* CONFIG_CONSOLE_POLL */
@@ -1950,14 +1946,14 @@ static int serial8250_startup(struct uart_port *port)
 	if (port->type == PORT_16C950) {
 		/* Wake up and initialize UART */
 		up->acr = 0;
-		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
-		serial_out(up, UART_EFR, UART_EFR_ECB);
-		serial_out(up, UART_IER, 0);
-		serial_out(up, UART_LCR, 0);
+		serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
+		serial_port_out(port, UART_EFR, UART_EFR_ECB);
+		serial_port_out(port, UART_IER, 0);
+		serial_port_out(port, UART_LCR, 0);
 		serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
-		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
-		serial_out(up, UART_EFR, UART_EFR_ECB);
-		serial_out(up, UART_LCR, 0);
+		serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
+		serial_port_out(port, UART_EFR, UART_EFR_ECB);
+		serial_port_out(port, UART_LCR, 0);
 	}
 
 #ifdef CONFIG_SERIAL_8250_RSA
@@ -1977,10 +1973,10 @@ static int serial8250_startup(struct uart_port *port)
 	/*
 	 * Clear the interrupt registers.
 	 */
-	serial_in(up, UART_LSR);
-	serial_in(up, UART_RX);
-	serial_in(up, UART_IIR);
-	serial_in(up, UART_MSR);
+	serial_port_in(port, UART_LSR);
+	serial_port_in(port, UART_RX);
+	serial_port_in(port, UART_IIR);
+	serial_port_in(port, UART_MSR);
 
 	/*
 	 * At this point, there's no way the LSR could still be 0xff;
@@ -1988,7 +1984,7 @@ static int serial8250_startup(struct uart_port *port)
 	 * here.
 	 */
 	if (!(port->flags & UPF_BUGGY_UART) &&
-	    (serial_in(up, UART_LSR) == 0xff)) {
+	    (serial_port_in(port, UART_LSR) == 0xff)) {
 		printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
 				   serial_index(port));
 		return -ENODEV;
@@ -2003,12 +1999,14 @@ static int serial8250_startup(struct uart_port *port)
 		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
 		fctr = serial_in(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
-		serial_out(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
-		serial_out(up, UART_TRG, UART_TRG_96);
-		serial_out(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
-		serial_out(up, UART_TRG, UART_TRG_96);
+		serial_port_out(port, UART_FCTR,
+				fctr | UART_FCTR_TRGD | UART_FCTR_RX);
+		serial_port_out(port, UART_TRG, UART_TRG_96);
+		serial_port_out(port, UART_FCTR,
+				fctr | UART_FCTR_TRGD | UART_FCTR_TX);
+		serial_port_out(port, UART_TRG, UART_TRG_96);
 
-		serial_out(up, UART_LCR, 0);
+		serial_port_out(port, UART_LCR, 0);
 	}
 
 	if (port->irq) {
@@ -2028,12 +2026,12 @@ static int serial8250_startup(struct uart_port *port)
 		wait_for_xmitr(up, UART_LSR_THRE);
 		serial_out_sync(up, UART_IER, UART_IER_THRI);
 		udelay(1); /* allow THRE to set */
-		iir1 = serial_in(up, UART_IIR);
-		serial_out(up, UART_IER, 0);
+		iir1 = serial_port_in(port, UART_IIR);
+		serial_port_out(port, UART_IER, 0);
 		serial_out_sync(up, UART_IER, UART_IER_THRI);
 		udelay(1); /* allow a working UART time to re-assert THRE */
-		iir = serial_in(up, UART_IIR);
-		serial_out(up, UART_IER, 0);
+		iir = serial_port_in(port, UART_IIR);
+		serial_port_out(port, UART_IER, 0);
 
 		if (port->irqflags & IRQF_SHARED)
 			enable_irq(port->irq);
@@ -2078,7 +2076,7 @@ static int serial8250_startup(struct uart_port *port)
 	/*
 	 * Now, initialize the UART
 	 */
-	serial_out(up, UART_LCR, UART_LCR_WLEN8);
+	serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
 
 	spin_lock_irqsave(&port->lock, flags);
 	if (up->port.flags & UPF_FOURPORT) {
@@ -2111,10 +2109,10 @@ static int serial8250_startup(struct uart_port *port)
 	 * Do a quick test to see if we receive an
 	 * interrupt when we enable the TX irq.
 	 */
-	serial_out(up, UART_IER, UART_IER_THRI);
-	lsr = serial_in(up, UART_LSR);
-	iir = serial_in(up, UART_IIR);
-	serial_out(up, UART_IER, 0);
+	serial_port_out(port, UART_IER, UART_IER_THRI);
+	lsr = serial_port_in(port, UART_LSR);
+	iir = serial_port_in(port, UART_IIR);
+	serial_port_out(port, UART_IER, 0);
 
 	if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
 		if (!(up->bugs & UART_BUG_TXEN)) {
@@ -2134,10 +2132,10 @@ dont_test_tx_en:
 	 * saved flags to avoid getting false values from polling
 	 * routines or the previous session.
 	 */
-	serial_in(up, UART_LSR);
-	serial_in(up, UART_RX);
-	serial_in(up, UART_IIR);
-	serial_in(up, UART_MSR);
+	serial_port_in(port, UART_LSR);
+	serial_port_in(port, UART_RX);
+	serial_port_in(port, UART_IIR);
+	serial_port_in(port, UART_MSR);
 	up->lsr_saved_flags = 0;
 	up->msr_saved_flags = 0;
 
@@ -2147,7 +2145,7 @@ dont_test_tx_en:
 	 * anyway, so we don't enable them here.
 	 */
 	up->ier = UART_IER_RLSI | UART_IER_RDI;
-	serial_out(up, UART_IER, up->ier);
+	serial_port_out(port, UART_IER, up->ier);
 
 	if (port->flags & UPF_FOURPORT) {
 		unsigned int icp;
@@ -2172,7 +2170,7 @@ static void serial8250_shutdown(struct uart_port *port)
 	 * Disable interrupts from this port
 	 */
 	up->ier = 0;
-	serial_out(up, UART_IER, 0);
+	serial_port_out(port, UART_IER, 0);
 
 	spin_lock_irqsave(&port->lock, flags);
 	if (port->flags & UPF_FOURPORT) {
@@ -2188,7 +2186,8 @@ static void serial8250_shutdown(struct uart_port *port)
 	/*
 	 * Disable break condition and FIFOs
 	 */
-	serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
+	serial_port_out(port, UART_LCR,
+			serial_port_in(port, UART_LCR) & ~UART_LCR_SBC);
 	serial8250_clear_fifos(up);
 
 #ifdef CONFIG_SERIAL_8250_RSA
@@ -2202,7 +2201,7 @@ static void serial8250_shutdown(struct uart_port *port)
 	 * Read data port to reset things, and then unlink from
 	 * the IRQ chain.
 	 */
-	serial_in(up, UART_RX);
+	serial_port_in(port, UART_RX);
 
 	del_timer_sync(&up->timer);
 	up->timer.function = serial8250_timeout;
@@ -2353,7 +2352,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (up->capabilities & UART_CAP_RTOIE)
 		up->ier |= UART_IER_RTOIE;
 
-	serial_out(up, UART_IER, up->ier);
+	serial_port_out(port, UART_IER, up->ier);
 
 	if (up->capabilities & UART_CAP_EFR) {
 		unsigned char efr = 0;
@@ -2365,11 +2364,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		if (termios->c_cflag & CRTSCTS)
 			efr |= UART_EFR_CTS;
 
-		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+		serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
 		if (port->flags & UPF_EXAR_EFR)
-			serial_out(up, UART_XR_EFR, efr);
+			serial_port_out(port, UART_XR_EFR, efr);
 		else
-			serial_out(up, UART_EFR, efr);
+			serial_port_out(port, UART_EFR, efr);
 	}
 
 #ifdef CONFIG_ARCH_OMAP
@@ -2377,18 +2376,20 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (cpu_is_omap1510() && is_omap_port(up)) {
 		if (baud == 115200) {
 			quot = 1;
-			serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
+			serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
 		} else
-			serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
+			serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
 	}
 #endif
 
-	if (up->capabilities & UART_NATSEMI) {
-		/* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
-		serial_out(up, UART_LCR, 0xe0);
-	} else {
-		serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
-	}
+	/*
+	 * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
+	 * otherwise just set DLAB
+	 */
+	if (up->capabilities & UART_NATSEMI)
+		serial_port_out(port, UART_LCR, 0xe0);
+	else
+		serial_port_out(port, UART_LCR, cval | UART_LCR_DLAB);
 
 	serial_dl_write(up, quot);
 
@@ -2397,16 +2398,15 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * is written without DLAB set, this mode will be disabled.
 	 */
 	if (port->type == PORT_16750)
-		serial_out(up, UART_FCR, fcr);
+		serial_port_out(port, UART_FCR, fcr);
 
-	serial_out(up, UART_LCR, cval);			/* reset DLAB */
+	serial_port_out(port, UART_LCR, cval);		/* reset DLAB */
 	up->lcr = cval;					/* Save LCR */
 	if (port->type != PORT_16750) {
-		if (fcr & UART_FCR_ENABLE_FIFO) {
-			/* emulated UARTs (Lucent Venus 167x) need two steps */
-			serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-		}
-		serial_out(up, UART_FCR, fcr);		/* set fcr */
+		/* emulated UARTs (Lucent Venus 167x) need two steps */
+		if (fcr & UART_FCR_ENABLE_FIFO)
+			serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
+		serial_port_out(port, UART_FCR, fcr);		/* set fcr */
 	}
 	serial8250_set_mctrl(port, port->mctrl);
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -2788,7 +2788,7 @@ static void serial8250_console_putchar(struct uart_port *port, int ch)
 		container_of(port, struct uart_8250_port, port);
 
 	wait_for_xmitr(up, UART_LSR_THRE);
-	serial_out(up, UART_TX, ch);
+	serial_port_out(port, UART_TX, ch);
 }
 
 /*
@@ -2820,12 +2820,12 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	/*
 	 *	First save the IER then disable the interrupts
 	 */
-	ier = serial_in(up, UART_IER);
+	ier = serial_port_in(port, UART_IER);
 
 	if (up->capabilities & UART_CAP_UUE)
-		serial_out(up, UART_IER, UART_IER_UUE);
+		serial_port_out(port, UART_IER, UART_IER_UUE);
 	else
-		serial_out(up, UART_IER, 0);
+		serial_port_out(port, UART_IER, 0);
 
 	uart_console_write(port, s, count, serial8250_console_putchar);
 
@@ -2834,7 +2834,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	 *	and restore the IER
 	 */
 	wait_for_xmitr(up, BOTH_EMPTY);
-	serial_out(up, UART_IER, ier);
+	serial_port_out(port, UART_IER, ier);
 
 	/*
 	 *	The receive handling will happen properly because the
@@ -2996,11 +2996,11 @@ void serial8250_resume_port(int line)
 
 	if (up->capabilities & UART_NATSEMI) {
 		/* Ensure it's still in high speed mode */
-		serial_out(up, UART_LCR, 0xE0);
+		serial_port_out(port, UART_LCR, 0xE0);
 
 		ns16550a_goto_highspeed(up);
 
-		serial_out(up, UART_LCR, 0);
+		serial_port_out(port, UART_LCR, 0);
 		port->uartclk = 921600*16;
 	}
 	uart_resume_port(&serial8250_reg, port);