diff options
Diffstat (limited to 'drivers/tty/serial/8250')
22 files changed, 12216 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c new file mode 100644 index 0000000..9f50c4e --- /dev/null +++ b/drivers/tty/serial/8250/8250.c @@ -0,0 +1,3357 @@ +/* + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. + * membase is an 'ioremapped' cookie. + */ + +#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/tty.h> +#include <linux/ratelimit.h> +#include <linux/tty_flip.h> +#include <linux/serial_reg.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/nmi.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include "8250.h" + +#ifdef CONFIG_SPARC +#include "suncore.h" +#endif + +/* + * Configuration: + * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option + * is unsafe when used on edge-triggered interrupts. + */ +static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; + +static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; + +static struct uart_driver serial8250_reg; + +static int serial_index(struct uart_port *port) +{ + return (serial8250_reg.minor - 64) + port->line; +} + +static unsigned int skip_txen_test; /* force skip of txen test at init time */ + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 512 + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ +#define CONFIG_SERIAL_DETECT_IRQ 1 +#endif +#ifdef CONFIG_SERIAL_8250_MANY_PORTS +#define CONFIG_SERIAL_MANY_PORTS 1 +#endif + +/* + * HUB6 is always on. This will be removed once the header + * files have been cleaned. + */ +#define CONFIG_HUB6 1 + +#include <asm/serial.h> +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#ifndef SERIAL_PORT_DFNS +#define SERIAL_PORT_DFNS +#endif + +static const struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS /* defined in asm/serial.h */ +}; + +#define UART_NR CONFIG_SERIAL_8250_NR_UARTS + +#ifdef CONFIG_SERIAL_8250_RSA + +#define PORT_RSA_MAX 4 +static unsigned long probe_rsa[PORT_RSA_MAX]; +static unsigned int probe_rsa_count; +#endif /* CONFIG_SERIAL_8250_RSA */ + +struct irq_info { + struct hlist_node node; + int irq; + spinlock_t lock; /* Protects list not the hash */ + struct list_head *head; +}; + +#define NR_IRQ_HASH 32 /* Can be adjusted later */ +static struct hlist_head irq_lists[NR_IRQ_HASH]; +static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial8250_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_8250] = { + .name = "8250", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16450] = { + .name = "16450", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550] = { + .name = "16550", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550A] = { + .name = "16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_CIRRUS] = { + .name = "Cirrus", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16650] = { + .name = "ST16650", + .fifo_size = 1, + .tx_loadsz = 1, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16650V2] = { + .name = "ST16650V2", + .fifo_size = 32, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16750] = { + .name = "TI16750", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, + }, + [PORT_STARTECH] = { + .name = "Startech", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16C950] = { + .name = "16C950/954", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + /* UART_CAP_EFR breaks billionon CF bluetooth card. */ + .flags = UART_CAP_FIFO | UART_CAP_SLEEP, + }, + [PORT_16654] = { + .name = "ST16654", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16850] = { + .name = "XR16850", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_RSA] = { + .name = "RSA", + .fifo_size = 2048, + .tx_loadsz = 2048, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, + .flags = UART_CAP_FIFO, + }, + [PORT_NS16550A] = { + .name = "NS16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_NATSEMI, + }, + [PORT_XSCALE] = { + .name = "XScale", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE, + }, + [PORT_RM9000] = { + .name = "RM9000", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_OCTEON] = { + .name = "OCTEON", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_AR7] = { + .name = "AR7", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_U6_16550A] = { + .name = "U6_16550A", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_TEGRA] = { + .name = "Tegra", + .fifo_size = 32, + .tx_loadsz = 8, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_01, + .flags = UART_CAP_FIFO | UART_CAP_RTOIE, + }, + [PORT_XR17D15X] = { + .name = "XR17D15X", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR, + }, +}; + +#if defined(CONFIG_MIPS_ALCHEMY) + +/* Au1x00 UART hardware has a weird register layout */ +static const u8 au_io_in_map[] = { + [UART_RX] = 0, + [UART_IER] = 2, + [UART_IIR] = 3, + [UART_LCR] = 5, + [UART_MCR] = 6, + [UART_LSR] = 7, + [UART_MSR] = 8, +}; + +static const u8 au_io_out_map[] = { + [UART_TX] = 1, + [UART_IER] = 2, + [UART_FCR] = 4, + [UART_LCR] = 5, + [UART_MCR] = 6, +}; + +/* sane hardware needs no mapping */ +static inline int map_8250_in_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_AU) + return offset; + return au_io_in_map[offset]; +} + +static inline int map_8250_out_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_AU) + return offset; + return au_io_out_map[offset]; +} + +#elif defined(CONFIG_SERIAL_8250_RM9K) + +static const u8 + regmap_in[8] = { + [UART_RX] = 0x00, + [UART_IER] = 0x0c, + [UART_IIR] = 0x14, + [UART_LCR] = 0x1c, + [UART_MCR] = 0x20, + [UART_LSR] = 0x24, + [UART_MSR] = 0x28, + [UART_SCR] = 0x2c + }, + regmap_out[8] = { + [UART_TX] = 0x04, + [UART_IER] = 0x0c, + [UART_FCR] = 0x18, + [UART_LCR] = 0x1c, + [UART_MCR] = 0x20, + [UART_LSR] = 0x24, + [UART_MSR] = 0x28, + [UART_SCR] = 0x2c + }; + +static inline int map_8250_in_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_RM9000) + return offset; + return regmap_in[offset]; +} + +static inline int map_8250_out_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_RM9000) + return offset; + return regmap_out[offset]; +} + +#else + +/* sane hardware needs no mapping */ +#define map_8250_in_reg(up, offset) (offset) +#define map_8250_out_reg(up, offset) (offset) + +#endif + +static unsigned int hub6_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + return inb(p->iobase + 1); +} + +static void hub6_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + outb(value, p->iobase + 1); +} + +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readb(p->membase + offset); +} + +static void mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writeb(value, p->membase + offset); +} + +static void mem32_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writel(value, p->membase + offset); +} + +static unsigned int mem32_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readl(p->membase + offset); +} + +static unsigned int au_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return __raw_readl(p->membase + offset); +} + +static void au_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + __raw_writel(value, p->membase + offset); +} + +static unsigned int io_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return inb(p->iobase + offset); +} + +static void io_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(value, p->iobase + offset); +} + +static int serial8250_default_handle_irq(struct uart_port *port); + +static void set_io_from_upio(struct uart_port *p) +{ + struct uart_8250_port *up = + container_of(p, struct uart_8250_port, port); + switch (p->iotype) { + case UPIO_HUB6: + p->serial_in = hub6_serial_in; + p->serial_out = hub6_serial_out; + break; + + case UPIO_MEM: + p->serial_in = mem_serial_in; + p->serial_out = mem_serial_out; + break; + + case UPIO_RM9000: + case UPIO_MEM32: + p->serial_in = mem32_serial_in; + p->serial_out = mem32_serial_out; + break; + + case UPIO_AU: + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; + break; + + default: + p->serial_in = io_serial_in; + p->serial_out = io_serial_out; + break; + } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; + p->handle_irq = serial8250_default_handle_irq; +} + +static void +serial_out_sync(struct uart_8250_port *up, int offset, int value) +{ + struct uart_port *p = &up->port; + switch (p->iotype) { + case UPIO_MEM: + case UPIO_MEM32: + case UPIO_AU: + p->serial_out(p, offset, value); + p->serial_in(p, UART_LCR); /* safe, no side-effects */ + break; + default: + p->serial_out(p, offset, value); + } +} + +#define serial_in(up, offset) \ + (up->port.serial_in(&(up)->port, (offset))) +#define serial_out(up, offset, value) \ + (up->port.serial_out(&(up)->port, (offset), (value))) +/* + * We used to support using pause I/O for certain machines. We + * haven't supported this for a while, but just in case it's badly + * needed for certain old 386 machines, I've left these #define's + * in.... + */ +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + +/* Uart divisor latch read */ +static inline int _serial_dl_read(struct uart_8250_port *up) +{ + return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; +} + +/* Uart divisor latch write */ +static inline void _serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_outp(up, UART_DLL, value & 0xff); + serial_outp(up, UART_DLM, value >> 8 & 0xff); +} + +#if defined(CONFIG_MIPS_ALCHEMY) +/* Au1x00 haven't got a standard divisor latch */ +static int serial_dl_read(struct uart_8250_port *up) +{ + if (up->port.iotype == UPIO_AU) + return __raw_readl(up->port.membase + 0x28); + else + return _serial_dl_read(up); +} + +static void serial_dl_write(struct uart_8250_port *up, int value) +{ + if (up->port.iotype == UPIO_AU) + __raw_writel(value, up->port.membase + 0x28); + else + _serial_dl_write(up, value); +} +#elif defined(CONFIG_SERIAL_8250_RM9K) +static int serial_dl_read(struct uart_8250_port *up) +{ + return (up->port.iotype == UPIO_RM9000) ? + (((__raw_readl(up->port.membase + 0x10) << 8) | + (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) : + _serial_dl_read(up); +} + +static void serial_dl_write(struct uart_8250_port *up, int value) +{ + if (up->port.iotype == UPIO_RM9000) { + __raw_writel(value, up->port.membase + 0x08); + __raw_writel(value >> 8, up->port.membase + 0x10); + } else { + _serial_dl_write(up, value); + } +} +#else +#define serial_dl_read(up) _serial_dl_read(up) +#define serial_dl_write(up, value) _serial_dl_write(up, value) +#endif + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_8250_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} + +/* + * FIFO support. + */ +static void serial8250_clear_fifos(struct uart_8250_port *p) +{ + if (p->capabilities & UART_CAP_FIFO) { + serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(p, UART_FCR, 0); + } +} + +/* + * IER sleep support. UARTs which have EFRs need the "extended + * capability" bit enabled. Note that on XR16C850s, we need to + * reset LCR to write to IER. + */ +static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) +{ + if (p->capabilities & UART_CAP_SLEEP) { + if (p->capabilities & UART_CAP_EFR) { + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(p, UART_EFR, UART_EFR_ECB); + serial_outp(p, UART_LCR, 0); + } + serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); + if (p->capabilities & UART_CAP_EFR) { + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(p, UART_EFR, 0); + serial_outp(p, UART_LCR, 0); + } + } +} + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_8250_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_outp(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +/* + * This is a quickie test to see how big the FIFO is. + * It doesn't work at all the time, more's the pity. + */ +static int size_fifo(struct uart_8250_port *up) +{ + unsigned char old_fcr, old_mcr, old_lcr; + unsigned short old_dl; + int count; + + old_lcr = serial_inp(up, UART_LCR); + serial_outp(up, UART_LCR, 0); + old_fcr = serial_inp(up, UART_FCR); + old_mcr = serial_inp(up, UART_MCR); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_MCR, UART_MCR_LOOP); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + old_dl = serial_dl_read(up); + serial_dl_write(up, 0x0001); + serial_outp(up, UART_LCR, 0x03); + for (count = 0; count < 256; count++) + serial_outp(up, UART_TX, count); + mdelay(20);/* FIXME - schedule_timeout */ + for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && + (count < 256); count++) + serial_inp(up, UART_RX); + serial_outp(up, UART_FCR, old_fcr); + serial_outp(up, UART_MCR, old_mcr); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_dl_write(up, old_dl); + serial_outp(up, UART_LCR, old_lcr); + + return count; +} + +/* + * Read UART ID using the divisor method - set DLL and DLM to zero + * and the revision will be in DLL and device type in DLM. We + * preserve the device state across this. + */ +static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) +{ + unsigned char old_dll, old_dlm, old_lcr; + unsigned int id; + + old_lcr = serial_inp(p, UART_LCR); + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); + + old_dll = serial_inp(p, UART_DLL); + old_dlm = serial_inp(p, UART_DLM); + + serial_outp(p, UART_DLL, 0); + serial_outp(p, UART_DLM, 0); + + id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; + + serial_outp(p, UART_DLL, old_dll); + serial_outp(p, UART_DLM, old_dlm); + serial_outp(p, UART_LCR, old_lcr); + + return id; +} + +/* + * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. + * When this function is called we know it is at least a StarTech + * 16650 V2, but it might be one of several StarTech UARTs, or one of + * its clones. (We treat the broken original StarTech 16650 V1 as a + * 16550, and why not? Startech doesn't seem to even acknowledge its + * existence.) + * + * What evil have men's minds wrought... + */ +static void autoconfig_has_efr(struct uart_8250_port *up) +{ + unsigned int id1, id2, id3, rev; + + /* + * Everything with an EFR has SLEEP + */ + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + + /* + * First we check to see if it's an Oxford Semiconductor UART. + * + * If we have to do this here because some non-National + * Semiconductor clone chips lock up if you try writing to the + * LSR register (which serial_icr_read does) + */ + + /* + * Check for Oxford Semiconductor 16C950. + * + * EFR [4] must be set else this test fails. + * + * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) + * claims that it's needed for 952 dual UART's (which are not + * recommended for new designs). + */ + up->acr = 0; + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x00); + id1 = serial_icr_read(up, UART_ID1); + id2 = serial_icr_read(up, UART_ID2); + id3 = serial_icr_read(up, UART_ID3); + rev = serial_icr_read(up, UART_REV); + + DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); + + if (id1 == 0x16 && id2 == 0xC9 && + (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { + up->port.type = PORT_16C950; + + /* + * Enable work around for the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if (id3 == 0x52 && rev == 0x01) + up->bugs |= UART_BUG_QUOT; + return; + } + + /* + * We check for a XR16C850 by setting DLL and DLM to 0, and then + * reading back DLL and DLM. The chip type depends on the DLM + * value read back: + * 0x10 - XR16C850 and the DLL contains the chip revision. + * 0x12 - XR16C2850. + * 0x14 - XR16C854. + */ + id1 = autoconfig_read_divisor_id(up); + DEBUG_AUTOCONF("850id=%04x ", id1); + + id2 = id1 >> 8; + if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { + up->port.type = PORT_16850; + return; + } + + /* + * It wasn't an XR16C850. + * + * We distinguish between the '654 and the '650 by counting + * how many bytes are in the FIFO. I'm using this for now, + * since that's the technique that was sent to me in the + * serial driver update, but I'm not convinced this works. + * I've had problems doing this in the past. -TYT + */ + if (size_fifo(up) == 64) + up->port.type = PORT_16654; + else + up->port.type = PORT_16650V2; +} + +/* + * We detected a chip without a FIFO. Only two fall into + * this category - the original 8250 and the 16450. The + * 16450 has a scratch register (accessible with LCR=0) + */ +static void autoconfig_8250(struct uart_8250_port *up) +{ + unsigned char scratch, status1, status2; + + up->port.type = PORT_8250; + + scratch = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, scratch); + + if (status1 == 0xa5 && status2 == 0x5a) + up->port.type = PORT_16450; +} + +static int broken_efr(struct uart_8250_port *up) +{ + /* + * Exar ST16C2550 "A2" devices incorrectly detect as + * having an EFR, and report an ID of 0x0201. See + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html + */ + if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) + return 1; + + return 0; +} + +static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) +{ + unsigned char status; + + status = serial_in(up, 0x04); /* EXCR2 */ +#define PRESL(x) ((x) & 0x30) + if (PRESL(status) == 0x10) { + /* already in high speed mode */ + return 0; + } else { + status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, status); + } + return 1; +} + +/* + * We know that the chip has FIFOs. Does it have an EFR? The + * EFR is located in the same register position as the IIR and + * we know the top two bits of the IIR are currently set. The + * EFR should contain zero. Try to read the EFR. + */ +static void autoconfig_16550a(struct uart_8250_port *up) +{ + unsigned char status1, status2; + unsigned int iersave; + + up->port.type = PORT_16550A; + up->capabilities |= UART_CAP_FIFO; + + /* + * Check for presence of the EFR when DLAB is set. + * Only ST16C650V1 UARTs pass this test. + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + if (serial_in(up, UART_EFR) == 0) { + serial_outp(up, UART_EFR, 0xA8); + if (serial_in(up, UART_EFR) != 0) { + DEBUG_AUTOCONF("EFRv1 "); + up->port.type = PORT_16650; + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + } else { + DEBUG_AUTOCONF("Motorola 8xxx DUART "); + } + serial_outp(up, UART_EFR, 0); + return; + } + + /* + * Maybe it requires 0xbf to be written to the LCR. + * (other ST16C650V2 UARTs, TI16C752A, etc) + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { + DEBUG_AUTOCONF("EFRv2 "); + autoconfig_has_efr(up); + return; + } + + /* + * Check for a National Semiconductor SuperIO chip. + * Attempt to switch to bank 2, read the value of the LOOP bit + * from EXCR1. Switch back to bank 0, change it in MCR. Then + * switch back to bank 2, read it from EXCR1 again and check + * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 + */ + serial_outp(up, UART_LCR, 0); + status1 = serial_in(up, UART_MCR); + serial_outp(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + + if (!((status2 ^ status1) & UART_MCR_LOOP)) { + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); + serial_outp(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_MCR, status1); + + if ((status2 ^ status1) & UART_MCR_LOOP) { + unsigned short quot; + + serial_outp(up, UART_LCR, 0xE0); + + quot = serial_dl_read(up); + quot <<= 3; + + if (ns16550a_goto_highspeed(up)) + serial_dl_write(up, quot); + + serial_outp(up, UART_LCR, 0); + + up->port.uartclk = 921600*16; + up->port.type = PORT_NS16550A; + up->capabilities |= UART_NATSEMI; + return; + } + } + + /* + * No EFR. Try to detect a TI16750, which only sets bit 5 of + * the IIR when 64 byte FIFO mode is enabled when DLAB is set. + * Try setting it with and without DLAB set. Cheap clones + * set bit 5 without DLAB set. + */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status2 = serial_in(up, UART_IIR) >> 5; + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, 0); + + DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); + + if (status1 == 6 && status2 == 7) { + up->port.type = PORT_16750; + up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; + return; + } + + /* + * Try writing and reading the UART_IER_UUE bit (b6). + * If it works, this is probably one of the Xscale platform's + * internal UARTs. + * We're going to explicitly set the UUE bit to 0 before + * trying to write and read a 1 just to make sure it's not + * already a 1 and maybe locked there before we even start start. + */ + iersave = serial_in(up, UART_IER); + serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); + if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { + /* + * OK it's in a known zero state, try writing and reading + * without disturbing the current state of the other bits. + */ + serial_outp(up, UART_IER, iersave | UART_IER_UUE); + if (serial_in(up, UART_IER) & UART_IER_UUE) { + /* + * It's an Xscale. + * We'll leave the UART_IER_UUE bit set to 1 (enabled). + */ + DEBUG_AUTOCONF("Xscale "); + up->port.type = PORT_XSCALE; + up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE; + return; + } + } else { + /* + * If we got here we couldn't force the IER_UUE bit to 0. + * Log it and continue. + */ + DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); + } + serial_outp(up, UART_IER, iersave); + + /* + * Exar uarts have EFR in a weird location + */ + if (up->port.flags & UPF_EXAR_EFR) { + up->port.type = PORT_XR17D15X; + up->capabilities |= UART_CAP_AFE | UART_CAP_EFR; + } + + /* + * We distinguish between 16550A and U6 16550A by counting + * how many bytes are in the FIFO. + */ + if (up->port.type == PORT_16550A && size_fifo(up) == 64) { + up->port.type = PORT_U6_16550A; + up->capabilities |= UART_CAP_AFE; + } +} + +/* + * This routine is called by rs_init() to initialize a specific serial + * port. It determines what type of UART chip this serial port is + * using: 8250, 16450, 16550, 16550A. The important question is + * whether or not this UART is a 16550A or not, since this will + * determine whether or not we can use its FIFO features or not. + */ +static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) +{ + unsigned char status1, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + unsigned long flags; + + if (!up->port.iobase && !up->port.mapbase && !up->port.membase) + return; + + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", + serial_index(&up->port), up->port.iobase, up->port.membase); + + /* + * We really do need global IRQs disabled here - we're going to + * be frobbing the chips IRQ enable register to see if it exists. + */ + spin_lock_irqsave(&up->port.lock, flags); + + up->capabilities = 0; + up->bugs = 0; + + if (!(up->port.flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, + * there's no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against + * false positives due to ISA bus float. The + * assumption is that 0x80 is a non-existent port; + * which should be safe since include/asm/io.h also + * makes this assumption. + * + * Note: this is safe as long as MCR bit 4 is clear + * and the device is in "PC" mode. + */ + scratch = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + /* + * Mask out IER[7:4] bits for test as some UARTs (e.g. TL + * 16C754B) allow only to modify them if an EFR bit is set. + */ + scratch2 = serial_inp(up, UART_IER) & 0x0f; + serial_outp(up, UART_IER, 0x0F); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(up, UART_IER) & 0x0f; + serial_outp(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) { + /* + * We failed; there's nothing here + */ + DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", + scratch2, scratch3); + goto out; + } + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(up->port.flags & UPF_SKIP_TEST)) { + serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(up, UART_MSR) & 0xF0; + serial_outp(up, UART_MCR, save_mcr); + if (status1 != 0x90) { + DEBUG_AUTOCONF("LOOP test failed (%02x) ", + status1); + goto out; + } + } + + /* + * We're pretty sure there's a port here. Lets find out what + * type of port it is. The IIR top two bits allows us to find + * out if it's 8250 or 16450, 16550, 16550A or later. This + * determines what we test for next. + * + * We also initialise the EFR (if any) to zero for later. The + * EFR occupies the same register location as the FCR and IIR. + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, 0); + serial_outp(up, UART_LCR, 0); + + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + + DEBUG_AUTOCONF("iir=%d ", scratch); + + switch (scratch) { + case 0: + autoconfig_8250(up); + break; + case 1: + up->port.type = PORT_UNKNOWN; + break; + case 2: + up->port.type = PORT_16550; + break; + case 3: + autoconfig_16550a(up); + break; + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Only probe for RSA ports if we got the region. + */ + if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { + int i; + + for (i = 0 ; i < probe_rsa_count; ++i) { + if (probe_rsa[i] == up->port.iobase && + __enable_rsa(up)) { + up->port.type = PORT_RSA; + break; + } + } + } +#endif + + serial_outp(up, UART_LCR, save_lcr); + + if (up->capabilities != uart_config[up->port.type].flags) { + printk(KERN_WARNING + "ttyS%d: detected caps %08x should be %08x\n", + serial_index(&up->port), up->capabilities, + uart_config[up->port.type].flags); + } + + up->port.fifosize = uart_config[up->port.type].fifo_size; + up->capabilities = uart_config[up->port.type].flags; + up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + + if (up->port.type == PORT_UNKNOWN) + goto out; + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (up->port.type == PORT_RSA) + serial_outp(up, UART_RSA_FRR, 0); +#endif + serial_outp(up, UART_MCR, save_mcr); + serial8250_clear_fifos(up); + serial_in(up, UART_RX); + if (up->capabilities & UART_CAP_UUE) + serial_outp(up, UART_IER, UART_IER_UUE); + else + serial_outp(up, UART_IER, 0); + + out: + spin_unlock_irqrestore(&up->port.lock, flags); + DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); +} + +static void autoconfig_irq(struct uart_8250_port *up) +{ + unsigned char save_mcr, save_ier; + unsigned char save_ICP = 0; + unsigned int ICP = 0; + unsigned long irqs; + int irq; + + if (up->port.flags & UPF_FOURPORT) { + ICP = (up->port.iobase & 0xfe0) | 0x1f; + save_ICP = inb_p(ICP); + outb_p(0x80, ICP); + (void) inb_p(ICP); + } + + /* forget possible initially masked and pending IRQ */ + probe_irq_off(probe_irq_on()); + save_mcr = serial_inp(up, UART_MCR); + save_ier = serial_inp(up, UART_IER); + serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); + + irqs = probe_irq_on(); + serial_outp(up, UART_MCR, 0); + udelay(10); + if (up->port.flags & UPF_FOURPORT) { + serial_outp(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS); + } else { + serial_outp(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + } + serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ + (void)serial_inp(up, UART_LSR); + (void)serial_inp(up, UART_RX); + (void)serial_inp(up, UART_IIR); + (void)serial_inp(up, UART_MSR); + serial_outp(up, UART_TX, 0xFF); + udelay(20); + irq = probe_irq_off(irqs); + + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_IER, save_ier); + + if (up->port.flags & UPF_FOURPORT) + outb_p(save_ICP, ICP); + + up->port.irq = (irq > 0) ? irq : 0; +} + +static inline void __stop_tx(struct uart_8250_port *p) +{ + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } +} + +static void serial8250_stop_tx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + __stop_tx(up); + + /* + * We really want to stop the transmitter from sending. + */ + if (up->port.type == PORT_16C950) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void serial8250_start_tx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + + if (up->bugs & UART_BUG_TXEN) { + unsigned char lsr; + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if ((up->port.type == PORT_RM9000) ? + (lsr & UART_LSR_THRE) : + (lsr & UART_LSR_TEMT)) + serial8250_tx_chars(up); + } + } + + /* + * Re-enable the transmitter if we disabled it. + */ + if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void serial8250_stop_rx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void serial8250_enable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + /* no MSR capabilities */ + if (up->bugs & UART_BUG_NOMSR) + return; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +/* + * Clear the Tegra rx fifo after a break + * + * FIXME: This needs to become a port specific callback once we have a + * framework for this + */ +static void clear_rx_fifo(struct uart_8250_port *up) +{ + unsigned int status, tmout = 10000; + do { + status = serial_in(up, UART_LSR); + if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) + status = serial_in(up, UART_RX); + else + break; + if (--tmout == 0) + break; + udelay(1); + } while (1); +} + +/* + * serial8250_rx_chars: processes according to the passed in LSR + * value, and returns the remaining LSR bits not handled + * by this Rx routine. + */ +unsigned char +serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch; + int max_count = 256; + char flag; + + do { + if (likely(lsr & UART_LSR_DR)) + ch = serial_inp(up, UART_RX); + else + /* + * Intel 82571 has a Serial Over Lan device that will + * set UART_LSR_BI without setting UART_LSR_DR when + * it receives a break. To avoid reading from the + * receive buffer without UART_LSR_DR bit set, we + * just force the read character to be 0 + */ + ch = 0; + + flag = TTY_NORMAL; + up->port.icount.rx++; + + lsr |= up->lsr_saved_flags; + up->lsr_saved_flags = 0; + + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { + /* + * For statistics only + */ + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * If tegra port then clear the rx fifo to + * accept another break/character. + */ + if (up->port.type == PORT_TEGRA) + clear_rx_fifo(up); + + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (lsr & UART_LSR_PE) + up->port.icount.parity++; + else if (lsr & UART_LSR_FE) + up->port.icount.frame++; + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + lsr &= up->port.read_status_mask; + + if (lsr & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); + +ignore_char: + lsr = serial_inp(up, UART_LSR); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); + return lsr; +} +EXPORT_SYMBOL_GPL(serial8250_rx_chars); + +void serial8250_tx_chars(struct uart_8250_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_tx_stopped(&up->port)) { + serial8250_stop_tx(&up->port); + return; + } + if (uart_circ_empty(xmit)) { + __stop_tx(up); + return; + } + + count = up->tx_loadsz; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + __stop_tx(up); +} +EXPORT_SYMBOL_GPL(serial8250_tx_chars); + +unsigned int serial8250_modem_status(struct uart_8250_port *up) +{ + unsigned int status = serial_in(up, UART_MSR); + + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.state != NULL) { + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + return status; +} +EXPORT_SYMBOL_GPL(serial8250_modem_status); + +/* + * This handles the interrupt from one port. + */ +int serial8250_handle_irq(struct uart_port *port, unsigned int iir) +{ + unsigned char status; + unsigned long flags; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + if (iir & UART_IIR_NO_INT) + return 0; + + spin_lock_irqsave(&up->port.lock, flags); + + status = serial_inp(up, UART_LSR); + + DEBUG_INTR("status = %x...", status); + + if (status & (UART_LSR_DR | UART_LSR_BI)) + status = serial8250_rx_chars(up, status); + serial8250_modem_status(up); + if (status & UART_LSR_THRE) + serial8250_tx_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + return 1; +} +EXPORT_SYMBOL_GPL(serial8250_handle_irq); + +static int serial8250_default_handle_irq(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned int iir = serial_in(up, UART_IIR); + + return serial8250_handle_irq(port, iir); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t serial8250_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0, handled = 0; + + DEBUG_INTR("serial8250_interrupt(%d)...", irq); + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_8250_port *up; + struct uart_port *port; + bool skip; + + up = list_entry(l, struct uart_8250_port, list); + port = &up->port; + skip = pass_counter && up->port.flags & UPF_IIR_ONCE; + + if (!skip && port->handle_irq(port)) { + handled = 1; + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + /* If we hit this, we're dead. */ + printk_ratelimited(KERN_ERR + "serial8250: too much work for irq%d\n", irq); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_RETVAL(handled); +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + spin_unlock_irq(&i->lock); + /* List empty so throw away the hash node */ + if (i->head == NULL) { + hlist_del(&i->node); + kfree(i); + } +} + +static int serial_link_irq_chain(struct uart_8250_port *up) +{ + struct hlist_head *h; + struct hlist_node *n; + struct irq_info *i; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + if (n == NULL) { + i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); + if (i == NULL) { + mutex_unlock(&hash_mutex); + return -ENOMEM; + } + spin_lock_init(&i->lock); + i->irq = up->port.irq; + hlist_add_head(&i->node, h); + } + mutex_unlock(&hash_mutex); + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + irq_flags |= up->port.irqflags; + ret = request_irq(up->port.irq, serial8250_interrupt, + irq_flags, "serial", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_8250_port *up) +{ + struct irq_info *i; + struct hlist_node *n; + struct hlist_head *h; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + BUG_ON(n == NULL); + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) + free_irq(up->port.irq, i); + + serial_do_unlink(i, up); + mutex_unlock(&hash_mutex); +} + +/* + * This function is used to handle ports that do not have an + * interrupt. This doesn't work very well for 16450's, but gives + * barely passable results for a 16550A. (Although at the expense + * of much CPU overhead). + */ +static void serial8250_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + + up->port.handle_irq(&up->port); + mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); +} + +static void serial8250_backup_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int iir, ier = 0, lsr; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Must disable interrupts or else we risk racing with the interrupt + * based handler. + */ + if (is_real_interrupt(up->port.irq)) { + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + } + + iir = serial_in(up, UART_IIR); + + /* + * This should be a safe test for anyone who doesn't trust the + * IIR bits on their UART, but it's specifically designed for + * the "Diva" UART used on the management processor on many HP + * ia64 and parisc boxes. + */ + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && + (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && + (lsr & UART_LSR_THRE)) { + iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); + iir |= UART_IIR_THRI; + } + + if (!(iir & UART_IIR_NO_INT)) + serial8250_tx_chars(up); + + if (is_real_interrupt(up->port.irq)) + serial_out(up, UART_IER, ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Standard timer interval plus 0.2s to keep the port running */ + mod_timer(&up->timer, + jiffies + uart_poll_timeout(&up->port) + HZ / 5); +} + +static unsigned int serial8250_tx_empty(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + unsigned int lsr; + + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + spin_unlock_irqrestore(&up->port.lock, flags); + + return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; +} + +static unsigned int serial8250_get_mctrl(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned int status; + unsigned int ret; + + status = serial8250_modem_status(up); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial8250_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_8250_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + for (;;) { + status = serial_in(up, UART_LSR); + + up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; + + if ((status & bits) == bits) + break; + if (--tmout == 0) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + unsigned int tmout; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + udelay(1); + touch_nmi_watchdog(); + } + } +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial8250_get_poll_char(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char lsr = serial_inp(up, UART_LSR); + + if (!(lsr & UART_LSR_DR)) + return NO_POLL_CHAR; + + return serial_inp(up, UART_RX); +} + + +static void serial8250_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + wait_for_xmitr(up, BOTH_EMPTY); + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, c); + if (c == 10) { + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_TX, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int serial8250_startup(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + unsigned char lsr, iir; + int retval; + + up->port.fifosize = uart_config[up->port.type].fifo_size; + up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + up->capabilities = uart_config[up->port.type].flags; + up->mcr = 0; + + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + + if (up->port.type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_IER, 0); + serial_outp(up, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial8250_clear_fifos(up); + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & UPF_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n", + serial_index(&up->port)); + return -ENODEV; + } + + /* + * For a XR16C850, we need to set the trigger levels + */ + if (up->port.type == PORT_16850) { + unsigned char fctr; + + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + + fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); + serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); + serial_outp(up, UART_TRG, UART_TRG_96); + serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); + serial_outp(up, UART_TRG, UART_TRG_96); + + serial_outp(up, UART_LCR, 0); + } + + if (is_real_interrupt(up->port.irq)) { + unsigned char iir1; + /* + * Test for UARTs that do not reassert THRE when the + * transmitter is idle and the interrupt has already + * been cleared. Real 16550s should always reassert + * this interrupt whenever the transmitter is idle and + * the interrupt is enabled. Delays are necessary to + * allow register changes to become visible. + */ + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.irqflags & IRQF_SHARED) + disable_irq_nosync(up->port.irq); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out_sync(up, UART_IER, UART_IER_THRI); + udelay(1); /* allow THRE to set */ + iir1 = serial_in(up, UART_IIR); + serial_out(up, UART_IER, 0); + serial_out_sync(up, UART_IER, UART_IER_THRI); + udelay(1); /* allow a working UART time to re-assert THRE */ + iir = serial_in(up, UART_IIR); + serial_out(up, UART_IER, 0); + + if (up->port.irqflags & IRQF_SHARED) + enable_irq(up->port.irq); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * If the interrupt is not reasserted, setup a timer to + * kick the UART on a regular basis. + */ + if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { + up->bugs |= UART_BUG_THRE; + pr_debug("ttyS%d - using backup timer\n", + serial_index(port)); + } + } + + /* + * The above check will only give an accurate result the first time + * the port is opened so this value needs to be preserved. + */ + if (up->bugs & UART_BUG_THRE) { + up->timer.function = serial8250_backup_timeout; + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + + uart_poll_timeout(port) + HZ / 5); + } + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + if (!is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT1; + } else + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + if (is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + + /* + * Do a quick test to see if we receive an + * interrupt when we enable the TX irq. + */ + serial_outp(up, UART_IER, UART_IER_THRI); + lsr = serial_in(up, UART_LSR); + iir = serial_in(up, UART_IIR); + serial_outp(up, UART_IER, 0); + + if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { + if (!(up->bugs & UART_BUG_TXEN)) { + up->bugs |= UART_BUG_TXEN; + pr_debug("ttyS%d - enabling bad tx status workarounds\n", + serial_index(port)); + } + } else { + up->bugs &= ~UART_BUG_TXEN; + } + +dont_test_tx_en: + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Clear the interrupt registers again for luck, and clear the + * saved flags to avoid getting false values from polling + * routines or the previous session. + */ + serial_inp(up, UART_LSR); + serial_inp(up, UART_RX); + serial_inp(up, UART_IIR); + serial_inp(up, UART_MSR); + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + return 0; +} + +static void serial8250_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial8250_clear_fifos(up); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things, and then unlink from + * the IRQ chain. + */ + (void) serial_in(up, UART_RX); + + del_timer_sync(&up->timer); + up->timer.function = serial8250_timeout; + if (is_real_interrupt(up->port.irq)) + serial_unlink_irq_chain(up); +} + +static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Handle magic divisors for baud rates above baud_base on + * SMSC SuperIO chips. + */ + if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/4)) + quot = 0x8001; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/8)) + quot = 0x8002; + else + quot = uart_get_divisor(port, baud); + + return quot; +} + +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + quot = serial8250_get_divisor(port, baud); + + /* + * Oxford Semi 952 rev B workaround + */ + if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) + quot++; + + if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { + if (baud < 2400) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; + else + fcr = uart_config[up->port.type].fcr; + } + + /* + * MCR-based auto flow control. When AFE is enabled, RTS will be + * deasserted when the receive FIFO contains more characters than + * the trigger, or the MCR RTS bit is cleared. In the case where + * the remote UART is not using CTS auto flow control, we must + * have sufficient FIFO entries for the latency of the remote + * UART to respond. IOW, at least 32 bytes of FIFO. + */ + if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { + up->mcr &= ~UART_MCR_AFE; + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + } + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (!(up->bugs & UART_BUG_NOMSR) && + UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + if (up->capabilities & UART_CAP_UUE) + up->ier |= UART_IER_UUE; + if (up->capabilities & UART_CAP_RTOIE) + up->ier |= UART_IER_RTOIE; + + serial_out(up, UART_IER, up->ier); + + if (up->capabilities & UART_CAP_EFR) { + unsigned char efr = 0; + /* + * TI16C752/Startech hardware flow control. FIXME: + * - TI16C752 requires control thresholds to be set. + * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. + */ + if (termios->c_cflag & CRTSCTS) + efr |= UART_EFR_CTS; + + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + if (up->port.flags & UPF_EXAR_EFR) + serial_outp(up, UART_XR_EFR, efr); + else + serial_outp(up, UART_EFR, efr); + } + +#ifdef CONFIG_ARCH_OMAP + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (cpu_is_omap1510() && is_omap_port(up)) { + if (baud == 115200) { + quot = 1; + serial_out(up, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_out(up, UART_OMAP_OSC_12M_SEL, 0); + } +#endif + + if (up->capabilities & UART_NATSEMI) { + /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ + serial_outp(up, UART_LCR, 0xe0); + } else { + serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + } + + serial_dl_write(up, quot); + + /* + * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR + * is written without DLAB set, this mode will be disabled. + */ + if (up->port.type == PORT_16750) + serial_outp(up, UART_FCR, fcr); + + serial_outp(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} +EXPORT_SYMBOL(serial8250_do_set_termios); + +static void +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + if (port->set_termios) + port->set_termios(port, termios, old); + else + serial8250_do_set_termios(port, termios, old); +} + +static void +serial8250_set_ldisc(struct uart_port *port, int new) +{ + if (new == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + serial8250_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + + +void serial8250_do_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *p = + container_of(port, struct uart_8250_port, port); + + serial8250_set_sleep(p, state != 0); +} +EXPORT_SYMBOL(serial8250_do_pm); + +static void +serial8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + if (port->pm) + port->pm(port, state, oldstate); + else + serial8250_do_pm(port, state, oldstate); +} + +static unsigned int serial8250_port_size(struct uart_8250_port *pt) +{ + if (pt->port.iotype == UPIO_AU) + return 0x1000; +#ifdef CONFIG_ARCH_OMAP + if (is_omap_port(pt)) + return 0x16 << pt->port.regshift; +#endif + return 8 << pt->port.regshift; +} + +/* + * Resource handling. + */ +static int serial8250_request_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + int ret = 0; + + switch (up->port.iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap_nocache(up->port.mapbase, + size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_HUB6: + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial8250_release_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + + switch (up->port.iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_HUB6: + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static int serial8250_request_rsa_resource(struct uart_8250_port *up) +{ + unsigned long start = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + int ret = -EINVAL; + + switch (up->port.iotype) { + case UPIO_HUB6: + case UPIO_PORT: + start += up->port.iobase; + if (request_region(start, size, "serial-rsa")) + ret = 0; + else + ret = -EBUSY; + break; + } + + return ret; +} + +static void serial8250_release_rsa_resource(struct uart_8250_port *up) +{ + unsigned long offset = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + case UPIO_PORT: + release_region(up->port.iobase + offset, size); + break; + } +} + +static void serial8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + serial8250_release_std_resource(up); + if (up->port.type == PORT_RSA) + serial8250_release_rsa_resource(up); +} + +static int serial8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + int ret = 0; + + ret = serial8250_request_std_resource(up); + if (ret == 0 && up->port.type == PORT_RSA) { + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + serial8250_release_std_resource(up); + } + + return ret; +} + +static void serial8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + int probeflags = PROBE_ANY; + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial8250_request_std_resource(up); + if (ret < 0) + return; + + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + probeflags &= ~PROBE_RSA; + + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + + if (flags & UART_CONFIG_TYPE) + autoconfig(up, probeflags); + + /* if access method is AU, it is a 16550 with a quirk */ + if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) + up->bugs |= UART_BUG_NOMSR; + + if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + autoconfig_irq(up); + + if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) + serial8250_release_rsa_resource(up); + if (up->port.type == PORT_UNKNOWN) + serial8250_release_std_resource(up); +} + +static int +serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || + ser->type == PORT_STARTECH) + return -EINVAL; + return 0; +} + +static const char * +serial8250_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops serial8250_pops = { + .tx_empty = serial8250_tx_empty, + .set_mctrl = serial8250_set_mctrl, + .get_mctrl = serial8250_get_mctrl, + .stop_tx = serial8250_stop_tx, + .start_tx = serial8250_start_tx, + .stop_rx = serial8250_stop_rx, + .enable_ms = serial8250_enable_ms, + .break_ctl = serial8250_break_ctl, + .startup = serial8250_startup, + .shutdown = serial8250_shutdown, + .set_termios = serial8250_set_termios, + .set_ldisc = serial8250_set_ldisc, + .pm = serial8250_pm, + .type = serial8250_type, + .release_port = serial8250_release_port, + .request_port = serial8250_request_port, + .config_port = serial8250_config_port, + .verify_port = serial8250_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial8250_get_poll_char, + .poll_put_char = serial8250_put_poll_char, +#endif +}; + +static struct uart_8250_port serial8250_ports[UART_NR]; + +static void (*serial8250_isa_config)(int port, struct uart_port *up, + unsigned short *capabilities); + +void serial8250_set_isa_configurator( + void (*v)(int port, struct uart_port *up, unsigned short *capabilities)) +{ + serial8250_isa_config = v; +} +EXPORT_SYMBOL(serial8250_set_isa_configurator); + +static void __init serial8250_isa_init_ports(void) +{ + struct uart_8250_port *up; + static int first = 1; + int i, irqflag = 0; + + if (!first) + return; + first = 0; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.line = i; + spin_lock_init(&up->port.lock); + + init_timer(&up->timer); + up->timer.function = serial8250_timeout; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + + up->port.ops = &serial8250_pops; + } + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0, up = serial8250_ports; + i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.irqflags = old_serial_port[i].irqflags; + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.hub6 = old_serial_port[i].hub6; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + set_io_from_upio(&up->port); + up->port.irqflags |= irqflag; + if (serial8250_isa_config != NULL) + serial8250_isa_config(i, &up->port, &up->capabilities); + + } +} + +static void +serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) +{ + up->port.type = type; + up->port.fifosize = uart_config[type].fifo_size; + up->capabilities = uart_config[type].flags; + up->tx_loadsz = uart_config[type].tx_loadsz; +} + +static void __init +serial8250_register_ports(struct uart_driver *drv, struct device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype = 0xFF; + } + + serial8250_isa_init_ports(); + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.dev = dev; + + if (up->port.flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(up, up->port.type); + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE + +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial8250_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_8250_port *up = &serial8250_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + touch_nmi_watchdog(); + + local_irq_save(flags); + if (up->port.sysrq) { + /* serial8250_handle_irq() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial8250_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier); + + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + serial8250_modem_status(up); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init serial8250_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= nr_uarts) + co->index = 0; + port = &serial8250_ports[co->index].port; + if (!port->iobase && !port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static int serial8250_console_early_setup(void) +{ + return serial8250_find_port_for_earlycon(); +} + +static struct console serial8250_console = { + .name = "ttyS", + .write = serial8250_console_write, + .device = uart_console_device, + .setup = serial8250_console_setup, + .early_setup = serial8250_console_early_setup, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &serial8250_reg, +}; + +static int __init serial8250_console_init(void) +{ + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + serial8250_isa_init_ports(); + register_console(&serial8250_console); + return 0; +} +console_initcall(serial8250_console_init); + +int serial8250_find_port(struct uart_port *p) +{ + int line; + struct uart_port *port; + + for (line = 0; line < nr_uarts; line++) { + port = &serial8250_ports[line].port; + if (uart_match_port(p, port)) + return line; + } + return -ENODEV; +} + +#define SERIAL8250_CONSOLE &serial8250_console +#else +#define SERIAL8250_CONSOLE NULL +#endif + +static struct uart_driver serial8250_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .cons = SERIAL8250_CONSOLE, +}; + +/* + * early_serial_setup - early registration for 8250 ports + * + * Setup an 8250 port structure prior to console initialisation. Use + * after console initialisation will cause undefined behaviour. + */ +int __init early_serial_setup(struct uart_port *port) +{ + struct uart_port *p; + + if (port->line >= ARRAY_SIZE(serial8250_ports)) + return -ENODEV; + + serial8250_isa_init_ports(); + p = &serial8250_ports[port->line].port; + p->iobase = port->iobase; + p->membase = port->membase; + p->irq = port->irq; + p->irqflags = port->irqflags; + p->uartclk = port->uartclk; + p->fifosize = port->fifosize; + p->regshift = port->regshift; + p->iotype = port->iotype; + p->flags = port->flags; + p->mapbase = port->mapbase; + p->private_data = port->private_data; + p->type = port->type; + p->line = port->line; + + set_io_from_upio(p); + if (port->serial_in) + p->serial_in = port->serial_in; + if (port->serial_out) + p->serial_out = port->serial_out; + if (port->handle_irq) + p->handle_irq = port->handle_irq; + else + p->handle_irq = serial8250_default_handle_irq; + + return 0; +} + +/** + * serial8250_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void serial8250_suspend_port(int line) +{ + uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); +} + +/** + * serial8250_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void serial8250_resume_port(int line) +{ + struct uart_8250_port *up = &serial8250_ports[line]; + + if (up->capabilities & UART_NATSEMI) { + /* Ensure it's still in high speed mode */ + serial_outp(up, UART_LCR, 0xE0); + + ns16550a_goto_highspeed(up); + + serial_outp(up, UART_LCR, 0); + up->port.uartclk = 921600*16; + } + uart_resume_port(&serial8250_reg, &up->port); +} + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. + */ +static int __devinit serial8250_probe(struct platform_device *dev) +{ + struct plat_serial8250_port *p = dev->dev.platform_data; + struct uart_port port; + int ret, i, irqflag = 0; + + memset(&port, 0, sizeof(struct uart_port)); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0; p && p->flags != 0; p++, i++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.irqflags = p->irqflags; + port.uartclk = p->uartclk; + port.regshift = p->regshift; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.hub6 = p->hub6; + port.private_data = p->private_data; + port.type = p->type; + port.serial_in = p->serial_in; + port.serial_out = p->serial_out; + port.handle_irq = p->handle_irq; + port.set_termios = p->set_termios; + port.pm = p->pm; + port.dev = &dev->dev; + port.irqflags |= irqflag; + ret = serial8250_register_port(&port); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int __devexit serial8250_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.dev == &dev->dev) + serial8250_unregister_port(i); + } + return 0; +} + +static int serial8250_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial8250_reg, &up->port); + } + + return 0; +} + +static int serial8250_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + serial8250_resume_port(i); + } + + return 0; +} + +static struct platform_driver serial8250_isa_driver = { + .probe = serial8250_probe, + .remove = __devexit_p(serial8250_remove), + .suspend = serial8250_suspend, + .resume = serial8250_resume, + .driver = { + .name = "serial8250", + .owner = THIS_MODULE, + }, +}; + +/* + * This "device" covers _all_ ISA 8250-compatible serial devices listed + * in the table in include/asm/serial.h + */ +static struct platform_device *serial8250_isa_devs; + +/* + * serial8250_register_port and serial8250_unregister_port allows for + * 16x50 serial ports to be configured at run-time, to support PCMCIA + * modems and PCI multiport cards. + */ +static DEFINE_MUTEX(serial_mutex); + +static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) +{ + int i; + + /* + * First, find a port entry which matches. + */ + for (i = 0; i < nr_uarts; i++) + if (uart_match_port(&serial8250_ports[i].port, port)) + return &serial8250_ports[i]; + + /* + * We didn't find a matching entry, so look for the first + * free entry. We look for one which hasn't been previously + * used (indicated by zero iobase). + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; + + /* + * That also failed. Last resort is to find any entry which + * doesn't have a real port associated with it. + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN) + return &serial8250_ports[i]; + + return NULL; +} + +/** + * serial8250_register_port - register a serial port + * @port: serial port template + * + * Configure the serial port specified by the request. If the + * port exists and is in use, it is hung up and unregistered + * first. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +int serial8250_register_port(struct uart_port *port) +{ + struct uart_8250_port *uart; + int ret = -ENOSPC; + + if (port->uartclk == 0) + return -EINVAL; + + mutex_lock(&serial_mutex); + + uart = serial8250_find_match_or_unused(port); + if (uart) { + uart_remove_one_port(&serial8250_reg, &uart->port); + + uart->port.iobase = port->iobase; + uart->port.membase = port->membase; + uart->port.irq = port->irq; + uart->port.irqflags = port->irqflags; + uart->port.uartclk = port->uartclk; + uart->port.fifosize = port->fifosize; + uart->port.regshift = port->regshift; + uart->port.iotype = port->iotype; + uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; + uart->port.mapbase = port->mapbase; + uart->port.private_data = port->private_data; + if (port->dev) + uart->port.dev = port->dev; + + if (port->flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(uart, port->type); + + set_io_from_upio(&uart->port); + /* Possibly override default I/O functions. */ + if (port->serial_in) + uart->port.serial_in = port->serial_in; + if (port->serial_out) + uart->port.serial_out = port->serial_out; + if (port->handle_irq) + uart->port.handle_irq = port->handle_irq; + /* Possibly override set_termios call */ + if (port->set_termios) + uart->port.set_termios = port->set_termios; + if (port->pm) + uart->port.pm = port->pm; + + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); + + ret = uart_add_one_port(&serial8250_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + mutex_unlock(&serial_mutex); + + return ret; +} +EXPORT_SYMBOL(serial8250_register_port); + +/** + * serial8250_unregister_port - remove a 16x50 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +void serial8250_unregister_port(int line) +{ + struct uart_8250_port *uart = &serial8250_ports[line]; + + mutex_lock(&serial_mutex); + uart_remove_one_port(&serial8250_reg, &uart->port); + if (serial8250_isa_devs) { + uart->port.flags &= ~UPF_BOOT_AUTOCONF; + uart->port.type = PORT_UNKNOWN; + uart->port.dev = &serial8250_isa_devs->dev; + uart->capabilities = uart_config[uart->port.type].flags; + uart_add_one_port(&serial8250_reg, &uart->port); + } else { + uart->port.dev = NULL; + } + mutex_unlock(&serial_mutex); +} +EXPORT_SYMBOL(serial8250_unregister_port); + +static int __init serial8250_init(void) +{ + int ret; + + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + printk(KERN_INFO "Serial: 8250/16550 driver, " + "%d ports, IRQ sharing %sabled\n", nr_uarts, + share_irqs ? "en" : "dis"); + +#ifdef CONFIG_SPARC + ret = sunserial_register_minors(&serial8250_reg, UART_NR); +#else + serial8250_reg.nr = UART_NR; + ret = uart_register_driver(&serial8250_reg); +#endif + if (ret) + goto out; + + serial8250_isa_devs = platform_device_alloc("serial8250", + PLAT8250_DEV_LEGACY); + if (!serial8250_isa_devs) { + ret = -ENOMEM; + goto unreg_uart_drv; + } + + ret = platform_device_add(serial8250_isa_devs); + if (ret) + goto put_dev; + + serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); + + ret = platform_driver_register(&serial8250_isa_driver); + if (ret == 0) + goto out; + + platform_device_del(serial8250_isa_devs); +put_dev: + platform_device_put(serial8250_isa_devs); +unreg_uart_drv: +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +out: + return ret; +} + +static void __exit serial8250_exit(void) +{ + struct platform_device *isa_dev = serial8250_isa_devs; + + /* + * This tells serial8250_unregister_port() not to re-register + * the ports (thereby making serial8250_isa_driver permanently + * in use.) + */ + serial8250_isa_devs = NULL; + + platform_driver_unregister(&serial8250_isa_driver); + platform_device_unregister(isa_dev); + +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +} + +module_init(serial8250_init); +module_exit(serial8250_exit); + +EXPORT_SYMBOL(serial8250_suspend_port); +EXPORT_SYMBOL(serial8250_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); + +module_param(share_irqs, uint, 0644); +MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" + " (unsafe)"); + +module_param(nr_uarts, uint, 0644); +MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); + +module_param(skip_txen_test, uint, 0644); +MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); + +#ifdef CONFIG_SERIAL_8250_RSA +module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); +MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); +#endif +MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h new file mode 100644 index 0000000..ae027be --- /dev/null +++ b/drivers/tty/serial/8250/8250.h @@ -0,0 +1,105 @@ +/* + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/serial_8250.h> + +struct uart_8250_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short capabilities; /* port capabilities */ + unsigned short bugs; /* port bugs */ + unsigned int tx_loadsz; /* transmit fifo load size */ + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ + + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ +#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS + unsigned char lsr_saved_flags; +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + unsigned char msr_saved_flags; +}; + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char hub6; + unsigned char io_type; + unsigned char *iomem_base; + unsigned short iomem_reg_shift; + unsigned long irqflags; +}; + +/* + * This replaces serial_uart_config in include/linux/serial.h + */ +struct serial8250_config { + const char *name; + unsigned short fifo_size; + unsigned short tx_loadsz; + unsigned char fcr; + unsigned int flags; +}; + +#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ +#define UART_CAP_EFR (1 << 9) /* UART has EFR */ +#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ +#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ +#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ +#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ + +#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ +#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ +#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ +#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#ifdef CONFIG_SERIAL_8250_SHARE_IRQ +#define SERIAL8250_SHARE_IRQS 1 +#else +#define SERIAL8250_SHARE_IRQS 0 +#endif + +#if defined(__alpha__) && !defined(CONFIG_PCI) +/* + * Digital did something really horribly wrong with the OUT1 and OUT2 + * lines on at least some ALPHA's. The failure mode is that if either + * is cleared, the machine locks up with endless interrupts. + */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) +#elif defined(CONFIG_SBC8560) +/* + * WindRiver did something similarly broken on their SBC8560 board. The + * UART tristates its IRQ output while OUT2 is clear, but they pulled + * the interrupt line _up_ instead of down, so if we register the IRQ + * while the UART is in that state, we die in an IRQ storm. */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) +#else +#define ALPHA_KLUDGE_MCR 0 +#endif diff --git a/drivers/tty/serial/8250/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c new file mode 100644 index 0000000..34b51c6 --- /dev/null +++ b/drivers/tty/serial/8250/8250_accent.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port accent_data[] = { + PORT(0x330, 4), + PORT(0x338, 4), + { }, +}; + +static struct platform_device accent_device = { + .name = "serial8250", + .id = PLAT8250_DEV_ACCENT, + .dev = { + .platform_data = accent_data, + }, +}; + +static int __init accent_init(void) +{ + return platform_device_register(&accent_device); +} + +module_init(accent_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c new file mode 100644 index 0000000..b0ce8c5 --- /dev/null +++ b/drivers/tty/serial/8250/8250_acorn.c @@ -0,0 +1,141 @@ +/* + * linux/drivers/serial/acorn.c + * + * Copyright (C) 1996-2003 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/types.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/ecard.h> +#include <asm/string.h> + +#include "8250.h" + +#define MAX_PORTS 3 + +struct serial_card_type { + unsigned int num_ports; + unsigned int uartclk; + unsigned int type; + unsigned int offset[MAX_PORTS]; +}; + +struct serial_card_info { + unsigned int num_ports; + int ports[MAX_PORTS]; + void __iomem *vaddr; +}; + +static int __devinit +serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct serial_card_info *info; + struct serial_card_type *type = id->data; + struct uart_port port; + unsigned long bus_addr; + unsigned int i; + + info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->num_ports = type->num_ports; + + bus_addr = ecard_resource_start(ec, type->type); + info->vaddr = ecardm_iomap(ec, type->type, 0, 0); + if (!info->vaddr) { + kfree(info); + return -ENOMEM; + } + + ecard_set_drvdata(ec, info); + + memset(&port, 0, sizeof(struct uart_port)); + port.irq = ec->irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + port.uartclk = type->uartclk; + port.iotype = UPIO_MEM; + port.regshift = 2; + port.dev = &ec->dev; + + for (i = 0; i < info->num_ports; i ++) { + port.membase = info->vaddr + type->offset[i]; + port.mapbase = bus_addr + type->offset[i]; + + info->ports[i] = serial8250_register_port(&port); + } + + return 0; +} + +static void __devexit serial_card_remove(struct expansion_card *ec) +{ + struct serial_card_info *info = ecard_get_drvdata(ec); + int i; + + ecard_set_drvdata(ec, NULL); + + for (i = 0; i < info->num_ports; i++) + if (info->ports[i] > 0) + serial8250_unregister_port(info->ports[i]); + + kfree(info); +} + +static struct serial_card_type atomwide_type = { + .num_ports = 3, + .uartclk = 7372800, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2800, 0x2400, 0x2000 }, +}; + +static struct serial_card_type serport_type = { + .num_ports = 2, + .uartclk = 3686400, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2000, 0x2020 }, +}; + +static const struct ecard_id serial_cids[] = { + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type }, + { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver serial_card_driver = { + .probe = serial_card_probe, + .remove = __devexit_p(serial_card_remove), + .id_table = serial_cids, + .drv = { + .name = "8250_acorn", + }, +}; + +static int __init serial_card_init(void) +{ + return ecard_register_driver(&serial_card_driver); +} + +static void __exit serial_card_exit(void) +{ + ecard_remove_driver(&serial_card_driver); +} + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver"); +MODULE_LICENSE("GPL"); + +module_init(serial_card_init); +module_exit(serial_card_exit); diff --git a/drivers/tty/serial/8250/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c new file mode 100644 index 0000000..d125dc1 --- /dev/null +++ b/drivers/tty/serial/8250/8250_boca.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port boca_data[] = { + PORT(0x100, 12), + PORT(0x108, 12), + PORT(0x110, 12), + PORT(0x118, 12), + PORT(0x120, 12), + PORT(0x128, 12), + PORT(0x130, 12), + PORT(0x138, 12), + PORT(0x140, 12), + PORT(0x148, 12), + PORT(0x150, 12), + PORT(0x158, 12), + PORT(0x160, 12), + PORT(0x168, 12), + PORT(0x170, 12), + PORT(0x178, 12), + { }, +}; + +static struct platform_device boca_device = { + .name = "serial8250", + .id = PLAT8250_DEV_BOCA, + .dev = { + .platform_data = boca_data, + }, +}; + +static int __init boca_init(void) +{ + return platform_device_register(&boca_device); +} + +module_init(boca_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Boca cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c new file mode 100644 index 0000000..f574eef --- /dev/null +++ b/drivers/tty/serial/8250/8250_dw.c @@ -0,0 +1,184 @@ +/* + * Synopsys DesignWare 8250 driver. + * + * Copyright 2011 Picochip, Jamie Iles. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the + * LCR is written whilst busy. If it is, then a busy detect interrupt is + * raised, the LCR needs to be rewritten and the uart status register read. + */ +#include <linux/device.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +struct dw8250_data { + int last_lcr; + int line; +}; + +static void dw8250_serial_out(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = p->private_data; + + if (offset == UART_LCR) + d->last_lcr = value; + + offset <<= p->regshift; + writeb(value, p->membase + offset); +} + +static unsigned int dw8250_serial_in(struct uart_port *p, int offset) +{ + offset <<= p->regshift; + + return readb(p->membase + offset); +} + +static void dw8250_serial_out32(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = p->private_data; + + if (offset == UART_LCR) + d->last_lcr = value; + + offset <<= p->regshift; + writel(value, p->membase + offset); +} + +static unsigned int dw8250_serial_in32(struct uart_port *p, int offset) +{ + offset <<= p->regshift; + + return readl(p->membase + offset); +} + +/* Offset for the DesignWare's UART Status Register. */ +#define UART_USR 0x1f + +static int dw8250_handle_irq(struct uart_port *p) +{ + struct dw8250_data *d = p->private_data; + unsigned int iir = p->serial_in(p, UART_IIR); + + if (serial8250_handle_irq(p, iir)) { + return 1; + } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { + /* Clear the USR and write the LCR again. */ + (void)p->serial_in(p, UART_USR); + p->serial_out(p, d->last_lcr, UART_LCR); + + return 1; + } + + return 0; +} + +static int __devinit dw8250_probe(struct platform_device *pdev) +{ + struct uart_port port = {}; + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + struct device_node *np = pdev->dev.of_node; + u32 val; + struct dw8250_data *data; + + if (!regs || !irq) { + dev_err(&pdev->dev, "no registers/irq defined\n"); + return -EINVAL; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + port.private_data = data; + + spin_lock_init(&port.lock); + port.mapbase = regs->start; + port.irq = irq->start; + port.handle_irq = dw8250_handle_irq; + port.type = PORT_8250; + port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | + UPF_FIXED_PORT | UPF_FIXED_TYPE; + port.dev = &pdev->dev; + + port.iotype = UPIO_MEM; + port.serial_in = dw8250_serial_in; + port.serial_out = dw8250_serial_out; + if (!of_property_read_u32(np, "reg-io-width", &val)) { + switch (val) { + case 1: + break; + case 4: + port.iotype = UPIO_MEM32; + port.serial_in = dw8250_serial_in32; + port.serial_out = dw8250_serial_out32; + break; + default: + dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n", + val); + return -EINVAL; + } + } + + if (!of_property_read_u32(np, "reg-shift", &val)) + port.regshift = val; + + if (of_property_read_u32(np, "clock-frequency", &val)) { + dev_err(&pdev->dev, "no clock-frequency property set\n"); + return -EINVAL; + } + port.uartclk = val; + + data->line = serial8250_register_port(&port); + if (data->line < 0) + return data->line; + + platform_set_drvdata(pdev, data); + + return 0; +} + +static int __devexit dw8250_remove(struct platform_device *pdev) +{ + struct dw8250_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + + return 0; +} + +static const struct of_device_id dw8250_match[] = { + { .compatible = "snps,dw-apb-uart" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, dw8250_match); + +static struct platform_driver dw8250_platform_driver = { + .driver = { + .name = "dw-apb-uart", + .owner = THIS_MODULE, + .of_match_table = dw8250_match, + }, + .probe = dw8250_probe, + .remove = __devexit_p(dw8250_remove), +}; + +module_platform_driver(dw8250_platform_driver); + +MODULE_AUTHOR("Jamie Iles"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver"); diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c new file mode 100644 index 0000000..eaafb98 --- /dev/null +++ b/drivers/tty/serial/8250/8250_early.c @@ -0,0 +1,287 @@ +/* + * Early serial console for 8250/16550 devices + * + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas <bjorn.helgaas@hp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, + * and on early_printk.c by Andi Kleen. + * + * This is for use before the serial driver has initialized, in + * particular, before the UARTs have been discovered and named. + * Instead of specifying the console device as, e.g., "ttyS0", + * we locate the device directly by its MMIO or I/O port address. + * + * The user can specify the device directly, e.g., + * earlycon=uart8250,io,0x3f8,9600n8 + * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * earlycon=uart8250,mmio32,0xff5e0000,115200n8 + * or + * console=uart8250,io,0x3f8,9600n8 + * console=uart8250,mmio,0xff5e0000,115200n8 + * console=uart8250,mmio32,0xff5e0000,115200n8 + */ + +#include <linux/tty.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <asm/io.h> +#include <asm/serial.h> +#ifdef CONFIG_FIX_EARLYCON_MEM +#include <asm/pgtable.h> +#include <asm/fixmap.h> +#endif + +struct early_serial8250_device { + struct uart_port port; + char options[16]; /* e.g., 115200n8 */ + unsigned int baud; +}; + +static struct early_serial8250_device early_device; + +static unsigned int __init serial_in(struct uart_port *port, int offset) +{ + switch (port->iotype) { + case UPIO_MEM: + return readb(port->membase + offset); + case UPIO_MEM32: + return readl(port->membase + (offset << 2)); + case UPIO_PORT: + return inb(port->iobase + offset); + default: + return 0; + } +} + +static void __init serial_out(struct uart_port *port, int offset, int value) +{ + switch (port->iotype) { + case UPIO_MEM: + writeb(value, port->membase + offset); + break; + case UPIO_MEM32: + writel(value, port->membase + (offset << 2)); + break; + case UPIO_PORT: + outb(value, port->iobase + offset); + break; + } +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void __init wait_for_xmitr(struct uart_port *port) +{ + unsigned int status; + + for (;;) { + status = serial_in(port, UART_LSR); + if ((status & BOTH_EMPTY) == BOTH_EMPTY) + return; + cpu_relax(); + } +} + +static void __init serial_putc(struct uart_port *port, int c) +{ + wait_for_xmitr(port); + serial_out(port, UART_TX, c); +} + +static void __init early_serial8250_write(struct console *console, + const char *s, unsigned int count) +{ + struct uart_port *port = &early_device.port; + unsigned int ier; + + /* Save the IER and disable interrupts */ + ier = serial_in(port, UART_IER); + serial_out(port, UART_IER, 0); + + uart_console_write(port, s, count, serial_putc); + + /* Wait for transmitter to become empty and restore the IER */ + wait_for_xmitr(port); + serial_out(port, UART_IER, ier); +} + +static unsigned int __init probe_baud(struct uart_port *port) +{ + unsigned char lcr, dll, dlm; + unsigned int quot; + + lcr = serial_in(port, UART_LCR); + serial_out(port, UART_LCR, lcr | UART_LCR_DLAB); + dll = serial_in(port, UART_DLL); + dlm = serial_in(port, UART_DLM); + serial_out(port, UART_LCR, lcr); + + quot = (dlm << 8) | dll; + return (port->uartclk / 16) / quot; +} + +static void __init init_port(struct early_serial8250_device *device) +{ + struct uart_port *port = &device->port; + unsigned int divisor; + unsigned char c; + + serial_out(port, UART_LCR, 0x3); /* 8n1 */ + serial_out(port, UART_IER, 0); /* no interrupt */ + serial_out(port, UART_FCR, 0); /* no fifo */ + serial_out(port, UART_MCR, 0x3); /* DTR + RTS */ + + divisor = port->uartclk / (16 * device->baud); + c = serial_in(port, UART_LCR); + serial_out(port, UART_LCR, c | UART_LCR_DLAB); + serial_out(port, UART_DLL, divisor & 0xff); + serial_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); +} + +static int __init parse_options(struct early_serial8250_device *device, + char *options) +{ + struct uart_port *port = &device->port; + int mmio, mmio32, length; + + if (!options) + return -ENODEV; + + port->uartclk = BASE_BAUD * 16; + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), + &options, 0); + if (mmio32) + port->regshift = 2; +#ifdef CONFIG_FIX_EARLYCON_MEM + set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, + port->mapbase & PAGE_MASK); + port->membase = + (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + port->membase += port->mapbase & ~PAGE_MASK; +#else + port->membase = ioremap_nocache(port->mapbase, 64); + if (!port->membase) { + printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", + __func__, + (unsigned long long) port->mapbase); + return -ENOMEM; + } +#endif + } else if (!strncmp(options, "io,", 3)) { + port->iotype = UPIO_PORT; + port->iobase = simple_strtoul(options + 3, &options, 0); + mmio = 0; + } else + return -EINVAL; + + options = strchr(options, ','); + if (options) { + options++; + device->baud = simple_strtoul(options, NULL, 0); + length = min(strcspn(options, " "), sizeof(device->options)); + strncpy(device->options, options, length); + } else { + device->baud = probe_baud(port); + snprintf(device->options, sizeof(device->options), "%u", + device->baud); + } + + if (mmio || mmio32) + printk(KERN_INFO + "Early serial console at MMIO%s 0x%llx (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + printk(KERN_INFO + "Early serial console at I/O port 0x%lx (options '%s')\n", + port->iobase, + device->options); + + return 0; +} + +static struct console early_serial8250_console __initdata = { + .name = "uart", + .write = early_serial8250_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static int __init early_serial8250_setup(char *options) +{ + struct early_serial8250_device *device = &early_device; + int err; + + if (device->port.membase || device->port.iobase) + return 0; + + err = parse_options(device, options); + if (err < 0) + return err; + + init_port(device); + return 0; +} + +int __init setup_early_serial8250_console(char *cmdline) +{ + char *options; + int err; + + options = strstr(cmdline, "uart8250,"); + if (!options) { + options = strstr(cmdline, "uart,"); + if (!options) + return 0; + } + + options = strchr(cmdline, ',') + 1; + err = early_serial8250_setup(options); + if (err < 0) + return err; + + register_console(&early_serial8250_console); + + return 0; +} + +int serial8250_find_port_for_earlycon(void) +{ + struct early_serial8250_device *device = &early_device; + struct uart_port *port = &device->port; + int line; + int ret; + + if (!device->port.membase && !device->port.iobase) + return -ENODEV; + + line = serial8250_find_port(port); + if (line < 0) + return -ENODEV; + + ret = update_console_cmdline("uart", 8250, + "ttyS", line, device->options); + if (ret < 0) + ret = update_console_cmdline("uart", 0, + "ttyS", line, device->options); + + return ret; +} + +early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/tty/serial/8250/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c new file mode 100644 index 0000000..bf53aab --- /dev/null +++ b/drivers/tty/serial/8250/8250_exar_st16c554.c @@ -0,0 +1,50 @@ +/* + * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com > + * Based on 8250_boca. + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port exar_data[] = { + PORT(0x100, 5), + PORT(0x108, 5), + PORT(0x110, 5), + PORT(0x118, 5), + { }, +}; + +static struct platform_device exar_device = { + .name = "serial8250", + .id = PLAT8250_DEV_EXAR_ST16C554, + .dev = { + .platform_data = exar_data, + }, +}; + +static int __init exar_init(void) +{ + return platform_device_register(&exar_device); +} + +module_init(exar_init); + +MODULE_AUTHOR("Paul B Schroeder"); +MODULE_DESCRIPTION("8250 serial probe module for Exar cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c new file mode 100644 index 0000000..be15826 --- /dev/null +++ b/drivers/tty/serial/8250/8250_fourport.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \ + } + +static struct plat_serial8250_port fourport_data[] = { + PORT(0x1a0, 9), + PORT(0x1a8, 9), + PORT(0x1b0, 9), + PORT(0x1b8, 9), + PORT(0x2a0, 5), + PORT(0x2a8, 5), + PORT(0x2b0, 5), + PORT(0x2b8, 5), + { }, +}; + +static struct platform_device fourport_device = { + .name = "serial8250", + .id = PLAT8250_DEV_FOURPORT, + .dev = { + .platform_data = fourport_data, + }, +}; + +static int __init fourport_init(void) +{ + return platform_device_register(&fourport_device); +} + +module_init(fourport_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c new file mode 100644 index 0000000..f4d3c47 --- /dev/null +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -0,0 +1,63 @@ +#include <linux/serial_reg.h> +#include <linux/serial_8250.h> + +#include "8250.h" + +/* + * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This isn't a full driver; it just provides an alternate IRQ + * handler to deal with an errata. Everything else is just + * using the bog standard 8250 support. + * + * We follow code flow of serial8250_default_handle_irq() but add + * a check for a break and insert a dummy read on the Rx for the + * immediately following IRQ event. + * + * We re-use the already existing "bug handling" lsr_saved_flags + * field to carry the "what we just did" information from the one + * IRQ event to the next one. + */ + +int fsl8250_handle_irq(struct uart_port *port) +{ + unsigned char lsr, orig_lsr; + unsigned long flags; + unsigned int iir; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + spin_lock_irqsave(&up->port.lock, flags); + + iir = port->serial_in(port, UART_IIR); + if (iir & UART_IIR_NO_INT) { + spin_unlock_irqrestore(&up->port.lock, flags); + return 0; + } + + /* This is the WAR; if last event was BRK, then read and return */ + if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) { + up->lsr_saved_flags &= ~UART_LSR_BI; + port->serial_in(port, UART_RX); + spin_unlock_irqrestore(&up->port.lock, flags); + return 1; + } + + lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR); + + if (lsr & (UART_LSR_DR | UART_LSR_BI)) + lsr = serial8250_rx_chars(up, lsr); + + serial8250_modem_status(up); + + if (lsr & UART_LSR_THRE) + serial8250_tx_chars(up); + + up->lsr_saved_flags = orig_lsr; + spin_unlock_irqrestore(&up->port.lock, flags); + return 1; +} diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c new file mode 100644 index 0000000..d8c0ffb --- /dev/null +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -0,0 +1,122 @@ +/* + * Serial Device Initialisation for Lasi/Asp/Wax/Dino + * + * (c) Copyright Matthew Wilcox <willy@debian.org> 2001-2002 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/serial_core.h> +#include <linux/signal.h> +#include <linux/types.h> + +#include <asm/hardware.h> +#include <asm/parisc-device.h> +#include <asm/io.h> + +#include "8250.h" + +static int __init serial_init_chip(struct parisc_device *dev) +{ + struct uart_port port; + unsigned long address; + int err; + + if (!dev->irq) { + /* We find some unattached serial ports by walking native + * busses. These should be silently ignored. Otherwise, + * what we have here is a missing parent device, so tell + * the user what they're missing. + */ + if (parisc_parent(dev)->id.hw_type != HPHW_IOA) + printk(KERN_INFO + "Serial: device 0x%llx not configured.\n" + "Enable support for Wax, Lasi, Asp or Dino.\n", + (unsigned long long)dev->hpa.start); + return -ENODEV; + } + + address = dev->hpa.start; + if (dev->id.sversion != 0x8d) + address += 0x800; + + memset(&port, 0, sizeof(port)); + port.iotype = UPIO_MEM; + /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ + port.uartclk = 7272727; + port.mapbase = address; + port.membase = ioremap_nocache(address, 16); + port.irq = dev->irq; + port.flags = UPF_BOOT_AUTOCONF; + port.dev = &dev->dev; + + err = serial8250_register_port(&port); + if (err < 0) { + printk(KERN_WARNING + "serial8250_register_port returned error %d\n", err); + iounmap(port.membase); + return err; + } + + return 0; +} + +static struct parisc_device_id serial_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { 0 } +}; + +/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1 + * attached to Dino. Unfortunately, Dino appears before Lasi in the device + * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one + * which only knows about Lasi and then a second which will find all the + * other serial ports. HPUX ignores this problem. + */ +static struct parisc_device_id lasi_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */ + { 0 } +}; + + +MODULE_DEVICE_TABLE(parisc, serial_tbl); + +static struct parisc_driver lasi_driver = { + .name = "serial_1", + .id_table = lasi_tbl, + .probe = serial_init_chip, +}; + +static struct parisc_driver serial_driver = { + .name = "serial", + .id_table = serial_tbl, + .probe = serial_init_chip, +}; + +static int __init probe_serial_gsc(void) +{ + register_parisc_driver(&lasi_driver); + register_parisc_driver(&serial_driver); + return 0; +} + +module_init(probe_serial_gsc); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c new file mode 100644 index 0000000..c13438c9 --- /dev/null +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -0,0 +1,327 @@ +/* + * Driver for the 98626/98644/internal serial interface on hp300/hp400 + * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs) + * + * Ported from 2.2 and modified to use the normal 8250 driver + * by Kars de Jong <jongk@linux-m68k.org>, May 2004. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/delay.h> +#include <linux/dio.h> +#include <linux/console.h> +#include <linux/slab.h> +#include <asm/io.h> + +#include "8250.h" + +#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) +#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? +#endif + +#ifdef CONFIG_HPAPCI +struct hp300_port +{ + struct hp300_port *next; /* next port */ + int line; /* line (tty) number */ +}; + +static struct hp300_port *hp300_ports; +#endif + +#ifdef CONFIG_HPDCA + +static int __devinit hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent); +static void __devexit hpdca_remove_one(struct dio_dev *d); + +static struct dio_device_id hpdca_dio_tbl[] = { + { DIO_ID_DCA0 }, + { DIO_ID_DCA0REM }, + { DIO_ID_DCA1 }, + { DIO_ID_DCA1REM }, + { 0 } +}; + +static struct dio_driver hpdca_driver = { + .name = "hpdca", + .id_table = hpdca_dio_tbl, + .probe = hpdca_init_one, + .remove = __devexit_p(hpdca_remove_one), +}; + +#endif + +static unsigned int num_ports; + +extern int hp300_uart_scode; + +/* Offset to UART registers from base of DCA */ +#define UART_OFFSET 17 + +#define DCA_ID 0x01 /* ID (read), reset (write) */ +#define DCA_IC 0x03 /* Interrupt control */ + +/* Interrupt control */ +#define DCA_IC_IE 0x80 /* Master interrupt enable */ + +#define HPDCA_BAUD_BASE 153600 + +/* Base address of the Frodo part */ +#define FRODO_BASE (0x41c000) + +/* + * Where we find the 8250-like APCI ports, and how far apart they are. + */ +#define FRODO_APCIBASE 0x0 +#define FRODO_APCISPACE 0x20 +#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE)) + +#define HPAPCI_BAUD_BASE 500400 + +#ifdef CONFIG_SERIAL_8250_CONSOLE +/* + * Parse the bootinfo to find descriptions for headless console and + * debug serial ports and register them with the 8250 driver. + * This function should be called before serial_console_init() is called + * to make sure the serial console will be available for use. IA-64 kernel + * calls this function from setup_arch() after the EFI and ACPI tables have + * been parsed. + */ +int __init hp300_setup_serial_console(void) +{ + int scode; + struct uart_port port; + + memset(&port, 0, sizeof(port)); + + if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX) + return 0; + + if (DIO_SCINHOLE(hp300_uart_scode)) + return 0; + + scode = hp300_uart_scode; + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.type = PORT_UNKNOWN; + + /* Check for APCI console */ + if (scode == 256) { +#ifdef CONFIG_HPAPCI + printk(KERN_INFO "Serial console is HP APCI 1\n"); + + port.uartclk = HPAPCI_BAUD_BASE * 16; + port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 2; + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); + return 0; +#endif + } else { +#ifdef CONFIG_HPDCA + unsigned long pa = dio_scodetophysaddr(scode); + if (!pa) + return 0; + + printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); + + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (pa + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.irq = DIO_IPL(pa + DIO_VIRADDRBASE); + + /* Enable board-interrupts */ + out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + + if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); + return 0; +#endif + } + + if (early_serial_setup(&port) < 0) + printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); + return 0; +} +#endif /* CONFIG_SERIAL_8250_CONSOLE */ + +#ifdef CONFIG_HPDCA +static int __devinit hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent) +{ + struct uart_port port; + int line; + +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (hp300_uart_scode == d->scode) { + /* Already got it. */ + return 0; + } +#endif + memset(&port, 0, sizeof(struct uart_port)); + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.irq = d->ipl; + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (d->resource.start + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.dev = &d->dev; + line = serial8250_register_port(&port); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" + " irq %d failed\n", d->scode, port.irq); + return -ENOMEM; + } + + /* Enable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + dio_set_drvdata(d, (void *)line); + + /* Reset the DCA */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); + udelay(100); + + num_ports++; + + return 0; +} +#endif + +static int __init hp300_8250_init(void) +{ + static int called; +#ifdef CONFIG_HPAPCI + int line; + unsigned long base; + struct uart_port uport; + struct hp300_port *port; + int i; +#endif + if (called) + return -ENODEV; + called = 1; + + if (!MACH_IS_HP300) + return -ENODEV; + +#ifdef CONFIG_HPDCA + dio_register_driver(&hpdca_driver); +#endif +#ifdef CONFIG_HPAPCI + if (hp300_model < HP_400) { + if (!num_ports) + return -ENODEV; + return 0; + } + /* These models have the Frodo chip. + * Port 0 is reserved for the Apollo Domain keyboard. + * Port 1 is either the console or the DCA. + */ + for (i = 1; i < 4; i++) { + /* Port 1 is the console on a 425e, on other machines it's + * mapped to DCA. + */ +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (i == 1) + continue; +#endif + + /* Create new serial device */ + port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + memset(&uport, 0, sizeof(struct uart_port)); + + base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); + + /* Memory mapped I/O */ + uport.iotype = UPIO_MEM; + uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \ + | UPF_BOOT_AUTOCONF; + /* XXX - no interrupt support yet */ + uport.irq = 0; + uport.uartclk = HPAPCI_BAUD_BASE * 16; + uport.mapbase = base; + uport.membase = (char *)(base + DIO_VIRADDRBASE); + uport.regshift = 2; + + line = serial8250_register_port(&uport); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() APCI" + " %d irq %d failed\n", i, uport.irq); + kfree(port); + continue; + } + + port->line = line; + port->next = hp300_ports; + hp300_ports = port; + + num_ports++; + } +#endif + + /* Any boards found? */ + if (!num_ports) + return -ENODEV; + + return 0; +} + +#ifdef CONFIG_HPDCA +static void __devexit hpdca_remove_one(struct dio_dev *d) +{ + int line; + + line = (int) dio_get_drvdata(d); + if (d->resource.start) { + /* Disable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); + } + serial8250_unregister_port(line); +} +#endif + +static void __exit hp300_8250_exit(void) +{ +#ifdef CONFIG_HPAPCI + struct hp300_port *port, *to_free; + + for (port = hp300_ports; port; ) { + serial8250_unregister_port(port->line); + to_free = port; + port = port->next; + kfree(to_free); + } + + hp300_ports = NULL; +#endif +#ifdef CONFIG_HPDCA + dio_unregister_driver(&hpdca_driver); +#endif +} + +module_init(hp300_8250_init); +module_exit(hp300_8250_exit); +MODULE_DESCRIPTION("HP DCA/APCI serial driver"); +MODULE_AUTHOR("Kars de Jong <jongk@linux-m68k.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c new file mode 100644 index 0000000..a5c778e --- /dev/null +++ b/drivers/tty/serial/8250/8250_hub6.c @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#define HUB6(card,port) \ + { \ + .iobase = 0x302, \ + .irq = 3, \ + .uartclk = 1843200, \ + .iotype = UPIO_HUB6, \ + .flags = UPF_BOOT_AUTOCONF, \ + .hub6 = (card) << 6 | (port) << 3 | 1, \ + } + +static struct plat_serial8250_port hub6_data[] = { + HUB6(0, 0), + HUB6(0, 1), + HUB6(0, 2), + HUB6(0, 3), + HUB6(0, 4), + HUB6(0, 5), + HUB6(1, 0), + HUB6(1, 1), + HUB6(1, 2), + HUB6(1, 3), + HUB6(1, 4), + HUB6(1, 5), + { }, +}; + +static struct platform_device hub6_device = { + .name = "serial8250", + .id = PLAT8250_DEV_HUB6, + .dev = { + .platform_data = hub6_data, + }, +}; + +static int __init hub6_init(void) +{ + return platform_device_register(&hub6_device); +} + +module_init(hub6_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_mca.c b/drivers/tty/serial/8250/8250_mca.c new file mode 100644 index 0000000..d20abf0 --- /dev/null +++ b/drivers/tty/serial/8250/8250_mca.c @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/mca.h> +#include <linux/serial_8250.h> + +/* + * FIXME: Should we be doing AUTO_IRQ here? + */ +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ +#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ +#else +#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST +#endif + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = MCA_FLAGS, \ + } + +static struct plat_serial8250_port mca_data[] = { + PORT(0x3220, 3), + PORT(0x3228, 3), + PORT(0x4220, 3), + PORT(0x4228, 3), + PORT(0x5220, 3), + PORT(0x5228, 3), + { }, +}; + +static struct platform_device mca_device = { + .name = "serial8250", + .id = PLAT8250_DEV_MCA, + .dev = { + .platform_data = mca_data, + }, +}; + +static int __init mca_init(void) +{ + if (!MCA_bus) + return -ENODEV; + return platform_device_register(&mca_device); +} + +module_init(mca_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for MCA ports"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c new file mode 100644 index 0000000..da2b0b0 --- /dev/null +++ b/drivers/tty/serial/8250/8250_pci.c @@ -0,0 +1,4223 @@ +/* + * Probe module for 8250/16550-type PCI serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <linux/8250_pci.h> +#include <linux/bitops.h> + +#include <asm/byteorder.h> +#include <asm/io.h> + +#include "8250.h" + +#undef SERIAL_DEBUG_PCI + +/* + * init function returns: + * > 0 - number of ports + * = 0 - use board->num_ports + * < 0 - error + */ +struct pci_serial_quirk { + u32 vendor; + u32 device; + u32 subvendor; + u32 subdevice; + int (*probe)(struct pci_dev *dev); + int (*init)(struct pci_dev *dev); + int (*setup)(struct serial_private *, + const struct pciserial_board *, + struct uart_port *, int); + void (*exit)(struct pci_dev *dev); +}; + +#define PCI_NUM_BAR_RESOURCES 6 + +struct serial_private { + struct pci_dev *dev; + unsigned int nr; + void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; + struct pci_serial_quirk *quirk; + int line[0]; +}; + +static int pci_default_setup(struct serial_private*, + const struct pciserial_board*, struct uart_port*, int); + +static void moan_device(const char *str, struct pci_dev *dev) +{ + printk(KERN_WARNING + "%s: %s\n" + "Please send the output of lspci -vv, this\n" + "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + "manufacturer and name of serial board or\n" + "modem board to rmk+serial@arm.linux.org.uk.\n", + pci_name(dev), str, dev->vendor, dev->device, + dev->subsystem_vendor, dev->subsystem_device); +} + +static int +setup_port(struct serial_private *priv, struct uart_port *port, + int bar, int offset, int regshift) +{ + struct pci_dev *dev = priv->dev; + unsigned long base, len; + + if (bar >= PCI_NUM_BAR_RESOURCES) + return -EINVAL; + + base = pci_resource_start(dev, bar); + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + len = pci_resource_len(dev, bar); + + if (!priv->remapped_bar[bar]) + priv->remapped_bar[bar] = ioremap_nocache(base, len); + if (!priv->remapped_bar[bar]) + return -ENOMEM; + + port->iotype = UPIO_MEM; + port->iobase = 0; + port->mapbase = base + offset; + port->membase = priv->remapped_bar[bar] + offset; + port->regshift = regshift; + } else { + port->iotype = UPIO_PORT; + port->iobase = base + offset; + port->mapbase = 0; + port->membase = NULL; + port->regshift = 0; + } + return 0; +} + +/* + * ADDI-DATA GmbH communication cards <info@addi-data.com> + */ +static int addidata_apci7800_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + bar = FL_GET_BASE(board->flags); + + if (idx < 2) { + offset += idx * board->uart_offset; + } else if ((idx >= 2) && (idx < 4)) { + bar += 1; + offset += ((idx - 2) * board->uart_offset); + } else if ((idx >= 4) && (idx < 6)) { + bar += 2; + offset += ((idx - 4) * board->uart_offset); + } else if (idx >= 6) { + bar += 3; + offset += ((idx - 6) * board->uart_offset); + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * AFAVLAB uses a different mixture of BARs and offsets + * Not that ugly ;) -- HW + */ +static int +afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = FL_GET_BASE(board->flags); + if (idx < 4) + bar += idx; + else { + bar = 4; + offset += (idx - 4) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * HP's Remote Management Console. The Diva chip came in several + * different versions. N-class, L2000 and A500 have two Diva chips, each + * with 3 UARTs (the third UART on the second chip is unused). Superdome + * and Keystone have one Diva chip with 3 UARTs. Some later machines have + * one Diva chip, but it has been expanded to 5 UARTs. + */ +static int pci_hp_diva_init(struct pci_dev *dev) +{ + int rc = 0; + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_TOSCA1: + case PCI_DEVICE_ID_HP_DIVA_HALFDOME: + case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + rc = 3; + break; + case PCI_DEVICE_ID_HP_DIVA_TOSCA2: + rc = 2; + break; + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + rc = 4; + break; + case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + case PCI_DEVICE_ID_HP_DIVA_HURRICANE: + rc = 1; + break; + } + + return rc; +} + +/* + * HP's Diva chip puts the 4th/5th serial port further out, and + * some serial ports are supposed to be hidden on certain models. + */ +static int +pci_hp_diva_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int offset = board->first_offset; + unsigned int bar = FL_GET_BASE(board->flags); + + switch (priv->dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + if (idx == 3) + idx++; + break; + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + if (idx > 0) + idx++; + if (idx > 2) + idx++; + break; + } + if (idx > 2) + offset = 0x18; + + offset += idx * board->uart_offset; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Added for EKF Intel i960 serial boards + */ +static int pci_inteli960ni_init(struct pci_dev *dev) +{ + unsigned long oldval; + + if (!(dev->subsystem_device & 0x1000)) + return -ENODEV; + + /* is firmware started? */ + pci_read_config_dword(dev, 0x44, (void *)&oldval); + if (oldval == 0x00001000L) { /* RESET value */ + printk(KERN_DEBUG "Local i960 firmware missing"); + return -ENODEV; + } + return 0; +} + +/* + * Some PCI serial cards using the PLX 9050 PCI interface chip require + * that the card interrupt be explicitly enabled or disabled. This + * seems to be mainly needed on card using the PLX which also use I/O + * mapped memory. + */ +static int pci_plx9050_init(struct pci_dev *dev) +{ + u8 irq_config; + void __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar 0", dev); + return 0; + } + + irq_config = 0x41; + if (dev->vendor == PCI_VENDOR_ID_PANACOM || + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) + irq_config = 0x43; + + if ((dev->vendor == PCI_VENDOR_ID_PLX) && + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) + /* + * As the megawolf cards have the int pins active + * high, and have 2 UART chips, both ints must be + * enabled on the 9050. Also, the UARTS are set in + * 16450 mode by default, so we have to enable the + * 16C950 'enhanced' mode so that we can use the + * deep FIFOs + */ + irq_config = 0x5b; + /* + * enable/disable interrupts + */ + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + writel(irq_config, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + + return 0; +} + +static void __devexit pci_plx9050_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) + return; + + /* + * disable interrupts + */ + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p != NULL) { + writel(0, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + } +} + +#define NI8420_INT_ENABLE_REG 0x38 +#define NI8420_INT_ENABLE_BIT 0x2000 + +static void __devexit pci_ni8420_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), + p + NI8420_INT_ENABLE_REG); + iounmap(p); +} + + +/* MITE registers */ +#define MITE_IOWBSR1 0xc4 +#define MITE_IOWCR1 0xf4 +#define MITE_LCIMR1 0x08 +#define MITE_LCIMR2 0x10 + +#define MITE_LCIMR2_CLR_CPU_IE (1 << 30) + +static void __devexit pci_ni8430_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); + iounmap(p); +} + +/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ +static int +sbs_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = 0; + + if (idx < 4) { + /* first four channels map to 0, 0x100, 0x200, 0x300 */ + offset += idx * board->uart_offset; + } else if (idx < 8) { + /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ + offset += idx * board->uart_offset + 0xC00; + } else /* we have only 8 ports on PMC-OCTALPRO */ + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* +* This does initialization for PMC OCTALPRO cards: +* maps the device memory, resets the UARTs (needed, bc +* if the module is removed and inserted again, the card +* is in the sleep mode) and enables global interrupt. +*/ + +/* global control register offset for SBS PMC-OctalPro */ +#define OCT_REG_CR_OFF 0x500 + +static int sbs_init(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + + if (p == NULL) + return -ENOMEM; + /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ + writeb(0x10, p + OCT_REG_CR_OFF); + udelay(50); + writeb(0x0, p + OCT_REG_CR_OFF); + + /* Set bit-2 (INTENABLE) of Control Register */ + writeb(0x4, p + OCT_REG_CR_OFF); + iounmap(p); + + return 0; +} + +/* + * Disables the global interrupt of PMC-OctalPro + */ + +static void __devexit sbs_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + /* FIXME: What if resource_len < OCT_REG_CR_OFF */ + if (p != NULL) + writeb(0, p + OCT_REG_CR_OFF); + iounmap(p); +} + +/* + * SIIG serial cards have an PCI interface chip which also controls + * the UART clocking frequency. Each UART can be clocked independently + * (except cards equipped with 4 UARTs) and initial clocking settings + * are stored in the EEPROM chip. It can cause problems because this + * version of serial driver doesn't support differently clocked UART's + * on single PCI card. To prevent this, initialization functions set + * high frequency clocking for all UART's on given card. It is safe (I + * hope) because it doesn't touch EEPROM settings to prevent conflicts + * with other OSes (like M$ DOS). + * + * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 + * + * There is two family of SIIG serial cards with different PCI + * interface chip and different configuration methods: + * - 10x cards have control registers in IO and/or memory space; + * - 20x cards have control registers in standard PCI configuration space. + * + * Note: all 10x cards have PCI device ids 0x10.. + * all 20x cards have PCI device ids 0x20.. + * + * There are also Quartet Serial cards which use Oxford Semiconductor + * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. + * + * Note: some SIIG cards are probed by the parport_serial object. + */ + +#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) + +static int pci_siig10x_init(struct pci_dev *dev) +{ + u16 data; + void __iomem *p; + + switch (dev->device & 0xfff8) { + case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ + data = 0xffdf; + break; + case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ + data = 0xf7ff; + break; + default: /* 1S1P, 4S */ + data = 0xfffb; + break; + } + + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + + writew(readw(p + 0x28) & data, p + 0x28); + readw(p + 0x28); + iounmap(p); + return 0; +} + +#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) + +static int pci_siig20x_init(struct pci_dev *dev) +{ + u8 data; + + /* Change clock frequency for the first UART. */ + pci_read_config_byte(dev, 0x6f, &data); + pci_write_config_byte(dev, 0x6f, data & 0xef); + + /* If this card has 2 UART, we have to do the same with second UART. */ + if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || + ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { + pci_read_config_byte(dev, 0x73, &data); + pci_write_config_byte(dev, 0x73, data & 0xef); + } + return 0; +} + +static int pci_siig_init(struct pci_dev *dev) +{ + unsigned int type = dev->device & 0xff00; + + if (type == 0x1000) + return pci_siig10x_init(dev); + else if (type == 0x2000) + return pci_siig20x_init(dev); + + moan_device("Unknown SIIG card", dev); + return -ENODEV; +} + +static int pci_siig_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; + + if (idx > 3) { + bar = 4; + offset = (idx - 4) * 8; + } + + return setup_port(priv, port, bar, offset, 0); +} + +/* + * Timedia has an explosion of boards, and to avoid the PCI table from + * growing *huge*, we use this function to collapse some 70 entries + * in the PCI table into one, for sanity's and compactness's sake. + */ +static const unsigned short timedia_single_port[] = { + 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 +}; + +static const unsigned short timedia_dual_port[] = { + 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, + 0xD079, 0 +}; + +static const unsigned short timedia_quad_port[] = { + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, + 0xB157, 0 +}; + +static const unsigned short timedia_eight_port[] = { + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 +}; + +static const struct timedia_struct { + int num; + const unsigned short *ids; +} timedia_data[] = { + { 1, timedia_single_port }, + { 2, timedia_dual_port }, + { 4, timedia_quad_port }, + { 8, timedia_eight_port } +}; + +/* + * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of + * listing them individually, this driver merely grabs them all with + * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, + * and should be left free to be claimed by parport_serial instead. + */ +static int pci_timedia_probe(struct pci_dev *dev) +{ + /* + * Check the third digit of the subdevice ID + * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) + */ + if ((dev->subsystem_device & 0x00f0) >= 0x70) { + dev_info(&dev->dev, + "ignoring Timedia subdevice %04x for parport_serial\n", + dev->subsystem_device); + return -ENODEV; + } + + return 0; +} + +static int pci_timedia_init(struct pci_dev *dev) +{ + const unsigned short *ids; + int i, j; + + for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { + ids = timedia_data[i].ids; + for (j = 0; ids[j]; j++) + if (dev->subsystem_device == ids[j]) + return timedia_data[i].num; + } + return 0; +} + +/* + * Timedia/SUNIX uses a mixture of BARs and offsets + * Ugh, this is ugly as all hell --- TYT + */ +static int +pci_timedia_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 0; + break; + case 1: + offset = board->uart_offset; + bar = 0; + break; + case 2: + bar = 1; + break; + case 3: + offset = board->uart_offset; + /* FALLTHROUGH */ + case 4: /* BAR 2 */ + case 5: /* BAR 3 */ + case 6: /* BAR 4 */ + case 7: /* BAR 5 */ + bar = idx - 2; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Some Titan cards are also a little weird + */ +static int +titan_400l_800l_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 1; + break; + case 1: + bar = 2; + break; + default: + bar = 4; + offset = (idx - 2) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_xircom_init(struct pci_dev *dev) +{ + msleep(100); + return 0; +} + +static int pci_ni8420_init(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return -ENOMEM; + + /* Enable CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, + p + NI8420_INT_ENABLE_REG); + + iounmap(p); + return 0; +} + +#define MITE_IOWBSR1_WSIZE 0xa +#define MITE_IOWBSR1_WIN_OFFSET 0x800 +#define MITE_IOWBSR1_WENAB (1 << 7) +#define MITE_LCIMR1_IO_IE_0 (1 << 24) +#define MITE_LCIMR2_SET_CPU_IE (1 << 31) +#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe + +static int pci_ni8430_init(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + u32 device_window; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return -ENOMEM; + + /* Set device window address and size in BAR0 */ + device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) + | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; + writel(device_window, p + MITE_IOWBSR1); + + /* Set window access to go to RAMSEL IO address space */ + writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), + p + MITE_IOWCR1); + + /* Enable IO Bus Interrupt 0 */ + writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); + + /* Enable CPU Interrupt */ + writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); + + iounmap(p); + return 0; +} + +/* UART Port Control Register */ +#define NI8430_PORTCON 0x0f +#define NI8430_PORTCON_TXVR_ENABLE (1 << 3) + +static int +pci_ni8430_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar, offset = board->first_offset; + + if (idx >= board->num_ports) + return 1; + + bar = FL_GET_BASE(board->flags); + offset += idx * board->uart_offset; + + base = pci_resource_start(priv->dev, bar); + len = pci_resource_len(priv->dev, bar); + p = ioremap_nocache(base, len); + + /* enable the transceiver */ + writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, + p + offset + NI8430_PORTCON); + + iounmap(p); + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_netmos_9900_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar; + + if ((priv->dev->subsystem_device & 0xff00) == 0x3000) { + /* netmos apparently orders BARs by datasheet layout, so serial + * ports get BARs 0 and 3 (or 1 and 4 for memmapped) + */ + bar = 3 * idx; + + return setup_port(priv, port, bar, 0, board->reg_shift); + } else { + return pci_default_setup(priv, board, port, idx); + } +} + +/* the 99xx series comes with a range of device IDs and a variety + * of capabilities: + * + * 9900 has varying capabilities and can cascade to sub-controllers + * (cascading should be purely internal) + * 9904 is hardwired with 4 serial ports + * 9912 and 9922 are hardwired with 2 serial ports + */ +static int pci_netmos_9900_numports(struct pci_dev *dev) +{ + unsigned int c = dev->class; + unsigned int pi; + unsigned short sub_serports; + + pi = (c & 0xff); + + if (pi == 2) { + return 1; + } else if ((pi == 0) && + (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { + /* two possibilities: 0x30ps encodes number of parallel and + * serial ports, or 0x1000 indicates *something*. This is not + * immediately obvious, since the 2s1p+4s configuration seems + * to offer all functionality on functions 0..2, while still + * advertising the same function 3 as the 4s+2s1p config. + */ + sub_serports = dev->subsystem_device & 0xf; + if (sub_serports > 0) { + return sub_serports; + } else { + printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); + return 0; + } + } + + moan_device("unknown NetMos/Mostech program interface", dev); + return 0; +} + +static int pci_netmos_init(struct pci_dev *dev) +{ + /* subdevice 0x00PS means <P> parallel, <S> serial */ + unsigned int num_serial = dev->subsystem_device & 0xf; + + if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || + (dev->device == PCI_DEVICE_ID_NETMOS_9865)) + return 0; + + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return 0; + + switch (dev->device) { /* FALLTHROUGH on all */ + case PCI_DEVICE_ID_NETMOS_9904: + case PCI_DEVICE_ID_NETMOS_9912: + case PCI_DEVICE_ID_NETMOS_9922: + case PCI_DEVICE_ID_NETMOS_9900: + num_serial = pci_netmos_9900_numports(dev); + break; + + default: + if (num_serial == 0 ) { + moan_device("unknown NetMos/Mostech device", dev); + } + } + + if (num_serial == 0) + return -ENODEV; + + return num_serial; +} + +/* + * These chips are available with optionally one parallel port and up to + * two serial ports. Unfortunately they all have the same product id. + * + * Basic configuration is done over a region of 32 I/O ports. The base + * ioport is called INTA or INTC, depending on docs/other drivers. + * + * The region of the 32 I/O ports is configured in POSIO0R... + */ + +/* registers */ +#define ITE_887x_MISCR 0x9c +#define ITE_887x_INTCBAR 0x78 +#define ITE_887x_UARTBAR 0x7c +#define ITE_887x_PS0BAR 0x10 +#define ITE_887x_POSIO0 0x60 + +/* I/O space size */ +#define ITE_887x_IOSIZE 32 +/* I/O space size (bits 26-24; 8 bytes = 011b) */ +#define ITE_887x_POSIO_IOSIZE_8 (3 << 24) +/* I/O space size (bits 26-24; 32 bytes = 101b) */ +#define ITE_887x_POSIO_IOSIZE_32 (5 << 24) +/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ +#define ITE_887x_POSIO_SPEED (3 << 29) +/* enable IO_Space bit */ +#define ITE_887x_POSIO_ENABLE (1 << 31) + +static int pci_ite887x_init(struct pci_dev *dev) +{ + /* inta_addr are the configuration addresses of the ITE */ + static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, + 0x200, 0x280, 0 }; + int ret, i, type; + struct resource *iobase = NULL; + u32 miscr, uartbar, ioport; + + /* search for the base-ioport */ + i = 0; + while (inta_addr[i] && iobase == NULL) { + iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, + "ite887x"); + if (iobase != NULL) { + /* write POSIO0R - speed | size | ioport */ + pci_write_config_dword(dev, ITE_887x_POSIO0, + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); + /* write INTCBAR - ioport */ + pci_write_config_dword(dev, ITE_887x_INTCBAR, + inta_addr[i]); + ret = inb(inta_addr[i]); + if (ret != 0xff) { + /* ioport connected */ + break; + } + release_region(iobase->start, ITE_887x_IOSIZE); + iobase = NULL; + } + i++; + } + + if (!inta_addr[i]) { + printk(KERN_ERR "ite887x: could not find iobase\n"); + return -ENODEV; + } + + /* start of undocumented type checking (see parport_pc.c) */ + type = inb(iobase->start + 0x18) & 0x0f; + + switch (type) { + case 0x2: /* ITE8871 (1P) */ + case 0xa: /* ITE8875 (1P) */ + ret = 0; + break; + case 0xe: /* ITE8872 (2S1P) */ + ret = 2; + break; + case 0x6: /* ITE8873 (1S) */ + ret = 1; + break; + case 0x8: /* ITE8874 (2S) */ + ret = 2; + break; + default: + moan_device("Unknown ITE887x", dev); + ret = -ENODEV; + } + + /* configure all serial ports */ + for (i = 0; i < ret; i++) { + /* read the I/O port from the device */ + pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), + &ioport); + ioport &= 0x0000FF00; /* the actual base address */ + pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_8 | ioport); + + /* write the ioport to the UARTBAR */ + pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); + uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ + uartbar |= (ioport << (16 * i)); /* set the ioport */ + pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); + + /* get current config */ + pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); + /* disable interrupts (UARTx_Routing[3:0]) */ + miscr &= ~(0xf << (12 - 4 * i)); + /* activate the UART (UARTx_En) */ + miscr |= 1 << (23 - i); + /* write new config with activated UART */ + pci_write_config_dword(dev, ITE_887x_MISCR, miscr); + } + + if (ret <= 0) { + /* the device has no UARTs if we get here */ + release_region(iobase->start, ITE_887x_IOSIZE); + } + + return ret; +} + +static void __devexit pci_ite887x_exit(struct pci_dev *dev) +{ + u32 ioport; + /* the ioport is bit 0-15 in POSIO0R */ + pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); + ioport &= 0xffff; + release_region(ioport, ITE_887x_IOSIZE); +} + +/* + * Oxford Semiconductor Inc. + * Check that device is part of the Tornado range of devices, then determine + * the number of ports available on the device. + */ +static int pci_oxsemi_tornado_init(struct pci_dev *dev) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts = 0; + + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xF000) != 0xC000) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* Tornado device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + printk(KERN_DEBUG + "%d ports detected on Oxford PCI Express device\n", + number_uarts); + } + pci_iounmap(dev, p); + return number_uarts; +} + +static int +pci_default_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> + (board->reg_shift + 3); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int +ce4100_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + int ret; + + ret = setup_port(priv, port, 0, 0, board->reg_shift); + port->iotype = UPIO_MEM32; + port->type = PORT_XSCALE; + port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + port->regshift = 2; + + return ret; +} + +static int +pci_omegapci_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + return setup_port(priv, port, 2, idx * 8, 0); +} + +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_NO_TXEN_TEST; + printk(KERN_DEBUG "serial8250: skipping TxEn test for device " + "[%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, + priv->dev->device, + priv->dev->subsystem_vendor, + priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + +static int kt_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_IIR_ONCE; + return skip_tx_en_setup(priv, board, port, idx); +} + +static int pci_eg20t_init(struct pci_dev *dev) +{ +#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) + return -ENODEV; +#else + return 0; +#endif +} + +static int +pci_xr17c154_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_EXAR_EFR; + return pci_default_setup(priv, board, port, idx); +} + +static int try_enable_msi(struct pci_dev *dev) +{ + /* use msi if available, but fallback to legacy otherwise */ + pci_enable_msi(dev); + return 0; +} + +static void disable_msi(struct pci_dev *dev) +{ + pci_disable_msi(dev); +} + +#define PCI_VENDOR_ID_SBSMODULARIO 0x124B +#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B +#define PCI_DEVICE_ID_OCTPRO 0x0001 +#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 +#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 +#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 +#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 +#define PCI_DEVICE_ID_TITAN_200I 0x8028 +#define PCI_DEVICE_ID_TITAN_400I 0x8048 +#define PCI_DEVICE_ID_TITAN_800I 0x8088 +#define PCI_DEVICE_ID_TITAN_800EH 0xA007 +#define PCI_DEVICE_ID_TITAN_800EHB 0xA008 +#define PCI_DEVICE_ID_TITAN_400EH 0xA009 +#define PCI_DEVICE_ID_TITAN_100E 0xA010 +#define PCI_DEVICE_ID_TITAN_200E 0xA012 +#define PCI_DEVICE_ID_TITAN_400E 0xA013 +#define PCI_DEVICE_ID_TITAN_800E 0xA014 +#define PCI_DEVICE_ID_TITAN_200EI 0xA016 +#define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_TITAN_400V3 0xA310 +#define PCI_DEVICE_ID_TITAN_410V3 0xA312 +#define PCI_DEVICE_ID_TITAN_800V3 0xA314 +#define PCI_DEVICE_ID_TITAN_800V3B 0xA315 +#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 +#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 +#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 +#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d + +/* Unknown vendors/cards - this should not be in linux/pci_ids.h */ +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 + +/* + * Master list of serial port init/setup/exit quirks. + * This does not describe the general nature of the port. + * (ie, baud base, number and location of ports, etc) + * + * This list is ordered alphabetically by vendor then device. + * Specific entries must come before more generic entries. + */ +static struct pci_serial_quirk pci_serial_quirks[] __refdata = { + /* + * ADDI-DATA GmbH communication cards <info@addi-data.com> + */ + { + .vendor = PCI_VENDOR_ID_ADDIDATA_OLD, + .device = PCI_DEVICE_ID_ADDIDATA_APCI7800, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = addidata_apci7800_setup, + }, + /* + * AFAVLAB cards - these may be called via parport_serial + * It is not clear whether this applies to all products. + */ + { + .vendor = PCI_VENDOR_ID_AFAVLAB, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = afavlab_setup, + }, + /* + * HP Diva + */ + { + .vendor = PCI_VENDOR_ID_HP, + .device = PCI_DEVICE_ID_HP_DIVA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_hp_diva_init, + .setup = pci_hp_diva_setup, + }, + /* + * Intel + */ + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_80960_RP, + .subvendor = 0xe4bf, + .subdevice = PCI_ANY_ID, + .init = pci_inteli960ni_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CE4100_UART, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = ce4100_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = try_enable_msi, + .setup = kt_serial_setup, + .exit = disable_msi, + }, + /* + * ITE + */ + { + .vendor = PCI_VENDOR_ID_ITE, + .device = PCI_DEVICE_ID_ITE_8872, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ite887x_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ite887x_exit), + }, + /* + * National Instruments + */ + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8430_init, + .setup = pci_ni8430_setup, + .exit = __devexit_p(pci_ni8430_exit), + }, + /* + * Panacom + */ + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * PLX + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9030, + .subvendor = PCI_SUBVENDOR_ID_PERLE, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_EXSYS, + .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, + .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_ROMULUS, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SIIG cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig_init, + .setup = pci_siig_setup, + }, + /* + * Titan cards + */ + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_400L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_800L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + /* + * Timedia cards + */ + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_DEVICE_ID_TIMEDIA_1889, + .subvendor = PCI_VENDOR_ID_TIMEDIA, + .subdevice = PCI_ANY_ID, + .probe = pci_timedia_probe, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_timedia_setup, + }, + /* + * Exar cards + */ + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C152, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C154, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C158, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, + /* + * Xircom cards + */ + { + .vendor = PCI_VENDOR_ID_XIRCOM, + .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_xircom_init, + .setup = pci_default_setup, + }, + /* + * Netmos cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_NETMOS, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_netmos_init, + .setup = pci_netmos_9900_setup, + }, + /* + * For Oxford Semiconductor Tornado based devices + */ + { + .vendor = PCI_VENDOR_ID_OXSEMI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_MAINPINE, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_DIGI, + .device = PCIE_DEVICE_ID_NEO_2_OX_IBM, + .subvendor = PCI_SUBVENDOR_ID_IBM, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8811, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8812, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8813, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8814, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8027, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8028, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8029, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x800C, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + /* + * Cronyx Omega PCI (PLX-chip based) + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_omegapci_setup, + }, + /* + * Default "match everything" terminator entry + */ + { + .vendor = PCI_ANY_ID, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + } +}; + +static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) +{ + return quirk_id == PCI_ANY_ID || quirk_id == dev_id; +} + +static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) +{ + struct pci_serial_quirk *quirk; + + for (quirk = pci_serial_quirks; ; quirk++) + if (quirk_id_matches(quirk->vendor, dev->vendor) && + quirk_id_matches(quirk->device, dev->device) && + quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && + quirk_id_matches(quirk->subdevice, dev->subsystem_device)) + break; + return quirk; +} + +static inline int get_pci_irq(struct pci_dev *dev, + const struct pciserial_board *board) +{ + if (board->flags & FL_NOIRQ) + return 0; + else + return dev->irq; +} + +/* + * This is the configuration table for all of the PCI serial boards + * which we support. It is directly indexed by the pci_board_num_t enum + * value, which is encoded in the pci_device_id PCI probe table's + * driver_data member. + * + * The makeup of these names are: + * pbn_bn{_bt}_n_baud{_offsetinhex} + * + * bn = PCI BAR number + * bt = Index using PCI BARs + * n = number of serial ports + * baud = baud rate + * offsetinhex = offset for each sequential port (in hex) + * + * This table is sorted by (in order): bn, bt, baud, offsetindex, n. + * + * Please note: in theory if n = 1, _bt infix should make no difference. + * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 + */ +enum pci_board_num_t { + pbn_default = 0, + + pbn_b0_1_115200, + pbn_b0_2_115200, + pbn_b0_4_115200, + pbn_b0_5_115200, + pbn_b0_8_115200, + + pbn_b0_1_921600, + pbn_b0_2_921600, + pbn_b0_4_921600, + + pbn_b0_2_1130000, + + pbn_b0_4_1152000, + + pbn_b0_2_1843200, + pbn_b0_4_1843200, + + pbn_b0_2_1843200_200, + pbn_b0_4_1843200_200, + pbn_b0_8_1843200_200, + + pbn_b0_1_4000000, + + pbn_b0_bt_1_115200, + pbn_b0_bt_2_115200, + pbn_b0_bt_4_115200, + pbn_b0_bt_8_115200, + + pbn_b0_bt_1_460800, + pbn_b0_bt_2_460800, + pbn_b0_bt_4_460800, + + pbn_b0_bt_1_921600, + pbn_b0_bt_2_921600, + pbn_b0_bt_4_921600, + pbn_b0_bt_8_921600, + + pbn_b1_1_115200, + pbn_b1_2_115200, + pbn_b1_4_115200, + pbn_b1_8_115200, + pbn_b1_16_115200, + + pbn_b1_1_921600, + pbn_b1_2_921600, + pbn_b1_4_921600, + pbn_b1_8_921600, + + pbn_b1_2_1250000, + + pbn_b1_bt_1_115200, + pbn_b1_bt_2_115200, + pbn_b1_bt_4_115200, + + pbn_b1_bt_2_921600, + + pbn_b1_1_1382400, + pbn_b1_2_1382400, + pbn_b1_4_1382400, + pbn_b1_8_1382400, + + pbn_b2_1_115200, + pbn_b2_2_115200, + pbn_b2_4_115200, + pbn_b2_8_115200, + + pbn_b2_1_460800, + pbn_b2_4_460800, + pbn_b2_8_460800, + pbn_b2_16_460800, + + pbn_b2_1_921600, + pbn_b2_4_921600, + pbn_b2_8_921600, + + pbn_b2_8_1152000, + + pbn_b2_bt_1_115200, + pbn_b2_bt_2_115200, + pbn_b2_bt_4_115200, + + pbn_b2_bt_2_921600, + pbn_b2_bt_4_921600, + + pbn_b3_2_115200, + pbn_b3_4_115200, + pbn_b3_8_115200, + + pbn_b4_bt_2_921600, + pbn_b4_bt_4_921600, + pbn_b4_bt_8_921600, + + /* + * Board-specific versions. + */ + pbn_panacom, + pbn_panacom2, + pbn_panacom4, + pbn_exsys_4055, + pbn_plx_romulus, + pbn_oxsemi, + pbn_oxsemi_1_4000000, + pbn_oxsemi_2_4000000, + pbn_oxsemi_4_4000000, + pbn_oxsemi_8_4000000, + pbn_intel_i960, + pbn_sgi_ioc3, + pbn_computone_4, + pbn_computone_6, + pbn_computone_8, + pbn_sbsxrsio, + pbn_exar_XR17C152, + pbn_exar_XR17C154, + pbn_exar_XR17C158, + pbn_exar_ibm_saturn, + pbn_pasemi_1682M, + pbn_ni8430_2, + pbn_ni8430_4, + pbn_ni8430_8, + pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, + pbn_ce4100_1_115200, + pbn_omegapci, + pbn_NETMOS9900_2s_115200, +}; + +/* + * uart_offset - the space between channels + * reg_shift - describes how the UART registers are mapped + * to PCI memory by the card. + * For example IER register on SBS, Inc. PMC-OctPro is located at + * offset 0x10 from the UART base, while UART_IER is defined as 1 + * in include/linux/serial_reg.h, + * see first lines of serial_in() and serial_out() in 8250.c +*/ + +static struct pciserial_board pci_boards[] __devinitdata = { + [pbn_default] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_2_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_4_115200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_5_115200] = { + .flags = FL_BASE0, + .num_ports = 5, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_8_115200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_921600] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_2_921600] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_4_921600] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b0_2_1130000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1130000, + .uart_offset = 8, + }, + + [pbn_b0_4_1152000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b0_2_1843200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 8, + }, + [pbn_b0_4_1843200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 8, + }, + + [pbn_b0_2_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_4_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_8_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_2_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_4_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_8_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_2_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_4_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_2_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_4_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_8_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_115200] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_2_115200] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_4_115200] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_8_115200] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_16_115200] = { + .flags = FL_BASE1, + .num_ports = 16, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_1_921600] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_921600] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_4_921600] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_8_921600] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_1250000] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1250000, + .uart_offset = 8, + }, + + [pbn_b1_bt_1_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_2_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_4_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_bt_2_921600] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_1382400] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_2_1382400] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_4_1382400] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_8_1382400] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 1382400, + .uart_offset = 8, + }, + + [pbn_b2_1_115200] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_2_115200] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_4_115200] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_8_115200] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_1_460800] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_4_460800] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_8_460800] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_16_460800] = { + .flags = FL_BASE2, + .num_ports = 16, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b2_1_921600] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_4_921600] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_8_921600] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b2_8_1152000] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b2_bt_1_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_2_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_4_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_bt_2_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_bt_4_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b3_2_115200] = { + .flags = FL_BASE3, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_4_115200] = { + .flags = FL_BASE3, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_8_115200] = { + .flags = FL_BASE3, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b4_bt_2_921600] = { + .flags = FL_BASE4, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_4_921600] = { + .flags = FL_BASE4, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_8_921600] = { + .flags = FL_BASE4, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + /* + * Entries following this are board-specific. + */ + + /* + * Panacom - IOMEM + */ + [pbn_panacom] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom2] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom4] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + + [pbn_exsys_4055] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + /* I think this entry is broken - the first_offset looks wrong --rmk */ + [pbn_plx_romulus] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x03, + }, + + /* + * This board uses the size of PCI Base region 0 to + * signal now many ports are available + */ + [pbn_oxsemi] = { + .flags = FL_BASE0|FL_REGION_SZ_CAP, + .num_ports = 32, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_oxsemi_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_4_4000000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_8_4000000] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + + + /* + * EKF addition for i960 Boards form EKF with serial port. + * Max 256 ports. + */ + [pbn_intel_i960] = { + .flags = FL_BASE0, + .num_ports = 32, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x10000, + }, + [pbn_sgi_ioc3] = { + .flags = FL_BASE0|FL_NOIRQ, + .num_ports = 1, + .base_baud = 458333, + .uart_offset = 8, + .reg_shift = 0, + .first_offset = 0x20178, + }, + + /* + * Computone - uses IOMEM. + */ + [pbn_computone_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_6] = { + .flags = FL_BASE0, + .num_ports = 6, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_sbsxrsio] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 256, + .reg_shift = 4, + }, + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + * Only basic 16550A support. + * XR17C15[24] are not tested, but they should work. + */ + [pbn_exar_XR17C152] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C154] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C158] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + + /* + * PA Semi PWRficient PA6T-1682M on-chip UART + */ + [pbn_pasemi_1682M] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 8333333, + }, + /* + * National Instruments 843x + */ + [pbn_ni8430_16] = { + .flags = FL_BASE0, + .num_ports = 16, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_2] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + /* + * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ce4100_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .reg_shift = 2, + }, + [pbn_omegapci] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 0x200, + }, + [pbn_NETMOS9900_2s_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + }, +}; + +static const struct pci_device_id softmodem_blacklist[] = { + { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ + { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ + { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ +}; + +/* + * Given a complete unknown PCI device, try to use some heuristics to + * guess what the configuration might be, based on the pitiful PCI + * serial specs. Returns 0 on success, 1 on failure. + */ +static int __devinit +serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) +{ + const struct pci_device_id *blacklist; + int num_iomem, num_port, first_port = -1, i; + + /* + * If it is not a communications device or the programming + * interface is greater than 6, give up. + * + * (Should we try to make guesses for multiport serial devices + * later?) + */ + if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || + (dev->class & 0xff) > 6) + return -ENODEV; + + /* + * Do not access blacklisted devices that are known not to + * feature serial ports. + */ + for (blacklist = softmodem_blacklist; + blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist); + blacklist++) { + if (dev->vendor == blacklist->vendor && + dev->device == blacklist->device) + return -ENODEV; + } + + num_iomem = num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + num_port++; + if (first_port == -1) + first_port = i; + } + if (pci_resource_flags(dev, i) & IORESOURCE_MEM) + num_iomem++; + } + + /* + * If there is 1 or 0 iomem regions, and exactly one port, + * use it. We guess the number of ports based on the IO + * region size. + */ + if (num_iomem <= 1 && num_port == 1) { + board->flags = first_port; + board->num_ports = pci_resource_len(dev, first_port) / 8; + return 0; + } + + /* + * Now guess if we've got a board which indexes by BARs. + * Each IO BAR should be 8 bytes, and they should follow + * consecutively. + */ + first_port = -1; + num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO && + pci_resource_len(dev, i) == 8 && + (first_port == -1 || (first_port + num_port) == i)) { + num_port++; + if (first_port == -1) + first_port = i; + } + } + + if (num_port > 1) { + board->flags = first_port | FL_BASE_BARS; + board->num_ports = num_port; + return 0; + } + + return -ENODEV; +} + +static inline int +serial_pci_matches(const struct pciserial_board *board, + const struct pciserial_board *guessed) +{ + return + board->num_ports == guessed->num_ports && + board->base_baud == guessed->base_baud && + board->uart_offset == guessed->uart_offset && + board->reg_shift == guessed->reg_shift && + board->first_offset == guessed->first_offset; +} + +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) +{ + struct uart_port serial_port; + struct serial_private *priv; + struct pci_serial_quirk *quirk; + int rc, nr_ports, i; + + nr_ports = board->num_ports; + + /* + * Find an init and setup quirks. + */ + quirk = find_quirk(dev); + + /* + * Run the new-style initialization function. + * The initialization function returns: + * <0 - error + * 0 - use board->num_ports + * >0 - number of ports + */ + if (quirk->init) { + rc = quirk->init(dev); + if (rc < 0) { + priv = ERR_PTR(rc); + goto err_out; + } + if (rc) + nr_ports = rc; + } + + priv = kzalloc(sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports, + GFP_KERNEL); + if (!priv) { + priv = ERR_PTR(-ENOMEM); + goto err_deinit; + } + + priv->dev = dev; + priv->quirk = quirk; + + memset(&serial_port, 0, sizeof(struct uart_port)); + serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + serial_port.uartclk = board->base_baud * 16; + serial_port.irq = get_pci_irq(dev, board); + serial_port.dev = &dev->dev; + + for (i = 0; i < nr_ports; i++) { + if (quirk->setup(priv, board, &serial_port, i)) + break; + +#ifdef SERIAL_DEBUG_PCI + printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", + serial_port.iobase, serial_port.irq, serial_port.iotype); +#endif + + priv->line[i] = serial8250_register_port(&serial_port); + if (priv->line[i] < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); + break; + } + } + priv->nr = i; + return priv; + +err_deinit: + if (quirk->exit) + quirk->exit(dev); +err_out: + return priv; +} +EXPORT_SYMBOL_GPL(pciserial_init_ports); + +void pciserial_remove_ports(struct serial_private *priv) +{ + struct pci_serial_quirk *quirk; + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (priv->remapped_bar[i]) + iounmap(priv->remapped_bar[i]); + priv->remapped_bar[i] = NULL; + } + + /* + * Find the exit quirks. + */ + quirk = find_quirk(priv->dev); + if (quirk->exit) + quirk->exit(priv->dev); + + kfree(priv); +} +EXPORT_SYMBOL_GPL(pciserial_remove_ports); + +void pciserial_suspend_ports(struct serial_private *priv) +{ + int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_suspend_ports); + +void pciserial_resume_ports(struct serial_private *priv) +{ + int i; + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(priv->dev); + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_resume_ports); + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct pci_serial_quirk *quirk; + struct serial_private *priv; + const struct pciserial_board *board; + struct pciserial_board tmp; + int rc; + + quirk = find_quirk(dev); + if (quirk->probe) { + rc = quirk->probe(dev); + if (rc) + return rc; + } + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", + ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + rc = pci_enable_device(dev); + pci_save_state(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pciserial_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, &tmp); + if (rc) + goto disable; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], + sizeof(struct pciserial_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + priv = pciserial_init_ports(dev, board); + if (!IS_ERR(priv)) { + pci_set_drvdata(dev, priv); + return 0; + } + + rc = PTR_ERR(priv); + + disable: + pci_disable_device(dev); + return rc; +} + +static void __devexit pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + pciserial_remove_ports(priv); + + pci_disable_device(dev); +} + +#ifdef CONFIG_PM +static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) + pciserial_suspend_ports(priv); + + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_resume_one(struct pci_dev *dev) +{ + int err; + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + + if (priv) { + /* + * The device may have been disabled. Re-enable it. + */ + err = pci_enable_device(dev); + /* FIXME: We cannot simply error out here */ + if (err) + printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n"); + pciserial_resume_ports(priv); + } + return 0; +} +#endif + +static struct pci_device_id serial_pci_tbl[] = { + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, + pbn_b1_2_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, + pbn_b1_2_1250000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, + pbn_b0_2_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, + pbn_b0_4_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_AFAVLAB, + PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, + + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_1_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + /* + * VScom SPCOM800, from sl@s.pl + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_921600 }, + /* Unknown card - subdevice 0x1584 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_KEYSPAN, + PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, + pbn_panacom }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom4 }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom2 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_VENDOR_ID_ESDGMBH, + PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, + PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, + pbn_exsys_4055 }, + /* + * Megawolf Romulus PCI Serial Card, from Mike Hudson + * (Exoray@isys.ca) + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, + 0x10b5, 0x106a, 0, 0, + pbn_plx_romulus }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, + 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, + 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_OXSEMI, 0x9505, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + + /* + * The below card is a little controversial since it is the + * subject of a PCI vendor/device ID clash. (See + * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). + * For now just used the hex ID 0x950a. + */ + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0, + pbn_b0_2_115200 }, + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_1130000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, + PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, + PCI_ANY_ID , PCI_ANY_ID, 0, 0, + pbn_b2_8_1152000 }, + + /* + * Oxford Semiconductor Inc. Tornado PCI express device range. + */ + { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + /* + * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, + pbn_oxsemi_8_4000000 }, + + /* + * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, + PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + + /* + * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, + * from skokodyn@yahoo.com + */ + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, + pbn_sbsxrsio }, + + /* + * Digitan DS560-558, from jimd@esoft.com + */ + { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, + + /* + * Titan Electronic cards + * The 400L and 800L have a custom setup quirk. + */ + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + + /* + * Computone devices submitted by Doug McNash dmcnash@computone.com + */ + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, + 0, 0, pbn_computone_4 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, + 0, 0, pbn_computone_8 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, + 0, 0, pbn_computone_6 }, + + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi }, + { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, + PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_921600 }, + + /* + * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org> + */ + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_460800 }, + + /* + * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). + * Cards are identified by their subsystem vendor IDs, which + * (in hex) match the model number. + * + * Note that JC140x are RS422/485 cards which require ox950 + * ACR = 0x10, and as such are not currently fully supported. + */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1402, 0x0002, 0, 0, + pbn_b0_2_921600 }, */ +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1404, 0x0004, 0, 0, + pbn_b0_4_921600 }, */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + /* + * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * Dell Remote Access Card III - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * RAStel 2 port modem, gerg@moreton.com.au + */ + { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + + /* + * EKF addition for i960 Boards form EKF with serial port + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, + 0xE4BF, PCI_ANY_ID, 0, 0, + pbn_intel_i960 }, + + /* + * Xircom Cardbus/Ethernet combos + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * Untested PCI modems, sent in from various folks... + */ + + /* + * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> + */ + { PCI_VENDOR_ID_ROCKWELL, 0x1004, + 0x1048, 0x1500, 0, 0, + pbn_b1_1_115200 }, + + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + 0xFF00, 0, 0, 0, + pbn_sgi_ioc3 }, + + /* + * HP Diva card + */ + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, + pbn_b1_1_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_5_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_2_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_4_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_8_115200 }, + + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C152 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C154 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C158 }, + + /* + * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) + */ + { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * ITE + */ + { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b1_bt_1_115200 }, + + /* + * IntaShield IS-200 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ + pbn_b2_2_115200 }, + /* + * IntaShield IS-400 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ + pbn_b2_4_115200 }, + /* + * Perle PCI-RAS cards + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, + 0, 0, pbn_b2_4_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, + 0, 0, pbn_b2_8_921600 }, + + /* + * Mainpine series cards: Fairly standard layout but fools + * parts of the autodetect in some cases and uses otherwise + * unmatched communications subclasses in the PCI Express case + */ + + { /* RockForceDUO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0300, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0400, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0600, + 0, 0, pbn_b0_2_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0700, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0800, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0C00, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUARTRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0D00, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x1D00, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceD1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2000, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceF1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2100, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceD2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceF2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2300, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceD4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2400, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceF4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceD8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2600, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceF8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2700, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express D1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3000, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express F1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3100, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express D2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3200, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express F2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3300, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express D4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3400, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express F4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3500, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express D8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3C00, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express F8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3D00, + 0, 0, pbn_b0_8_115200 }, + + + /* + * PA Semi PA6T-1682M on-chip UART + */ + { PCI_VENDOR_ID_PASEMI, 0xa004, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pasemi_1682M }, + + /* + * National Instruments + */ + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + + /* + * ADDI-DATA GmbH communication cards <info@addi-data.com> + */ + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA_OLD, + PCI_DEVICE_ID_ADDIDATA_APCI7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b1_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7800_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, + PCI_VENDOR_ID_IBM, 0x0299, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + /* the 9901 is a rebranded 9912 */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x3002, + 0, 0, pbn_NETMOS9900_2s_115200 }, + + /* + * Best Connectivity and Rosewill PCI Multi I/O cards + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3002, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3004, + 0, 0, pbn_b0_bt_4_115200 }, + /* Intel CE4100 */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ce4100_1_115200 }, + + /* + * Cronyx Omega PCI + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_omegapci }, + + /* + * These entries match devices with class COMMUNICATION_SERIAL, + * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL + */ + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MODEM << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, + 0xffff00, pbn_default }, + { 0, } +}; + +static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, + pci_channel_state_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (priv) + pciserial_suspend_ports(priv); + + pci_disable_device(dev); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) +{ + int rc; + + rc = pci_enable_device(dev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_restore_state(dev); + pci_save_state(dev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void serial8250_io_resume(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) + pciserial_resume_ports(priv); +} + +static struct pci_error_handlers serial8250_err_handler = { + .error_detected = serial8250_io_error_detected, + .slot_reset = serial8250_io_slot_reset, + .resume = serial8250_io_resume, +}; + +static struct pci_driver serial_pci_driver = { + .name = "serial", + .probe = pciserial_init_one, + .remove = __devexit_p(pciserial_remove_one), +#ifdef CONFIG_PM + .suspend = pciserial_suspend_one, + .resume = pciserial_resume_one, +#endif + .id_table = serial_pci_tbl, + .err_handler = &serial8250_err_handler, +}; + +static int __init serial8250_pci_init(void) +{ + return pci_register_driver(&serial_pci_driver); +} + +static void __exit serial8250_pci_exit(void) +{ + pci_unregister_driver(&serial_pci_driver); +} + +module_init(serial8250_pci_init); +module_exit(serial8250_pci_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); +MODULE_DEVICE_TABLE(pci, serial_pci_tbl); diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c new file mode 100644 index 0000000..a2f2365 --- /dev/null +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -0,0 +1,524 @@ +/* + * Probe module for 8250/16550-type ISAPNP serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * Ported to the Linux PnP Layer - (C) Adam Belay. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pnp.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/serial_core.h> +#include <linux/bitops.h> + +#include <asm/byteorder.h> + +#include "8250.h" + +#define UNKNOWN_DEV 0x3000 + + +static const struct pnp_device_id pnp_dev_table[] = { + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "AAC000F", 0 }, + /* Anchor Datacomm BV */ + /* SXPro 144 External Data Fax Modem Plug & Play */ + { "ADC0001", 0 }, + /* SXPro 288 External Data Fax Modem Plug & Play */ + { "ADC0002", 0 }, + /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */ + { "AEI0250", 0 }, + /* Actiontec ISA PNP 56K X2 Fax Modem */ + { "AEI1240", 0 }, + /* Rockwell 56K ACF II Fax+Data+Voice Modem */ + { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, + /* AZT3005 PnP SOUND DEVICE */ + { "AZT4001", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Boca Research */ + /* Boca Complete Ofc Communicator 14.4 Data-FAX */ + { "BRI0A49", 0 }, + /* Boca Research 33,600 ACF Modem */ + { "BRI1400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI3400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI0A49", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Computer Peripherals Inc */ + /* EuroViVa CommCenter-33.6 SP PnP */ + { "CPI4050", 0 }, + /* Creative Labs */ + /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ + { "CTL3001", 0 }, + /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ + { "CTL3011", 0 }, + /* Davicom ISA 33.6K Modem */ + { "DAV0336", 0 }, + /* Creative */ + /* Creative Modem Blaster Flash56 DI5601-1 */ + { "DMB1032", 0 }, + /* Creative Modem Blaster V.90 DI5660 */ + { "DMB2001", 0 }, + /* E-Tech */ + /* E-Tech CyberBULLET PC56RVP */ + { "ETT0002", 0 }, + /* FUJITSU */ + /* Fujitsu 33600 PnP-I2 R Plug & Play */ + { "FUJ0202", 0 }, + /* Fujitsu FMV-FX431 Plug & Play */ + { "FUJ0205", 0 }, + /* Fujitsu 33600 PnP-I4 R Plug & Play */ + { "FUJ0206", 0 }, + /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ + { "FUJ0209", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "GVC000F", 0 }, + /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ + { "GVC0303", 0 }, + /* Hayes */ + /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ + { "HAY0001", 0 }, + /* Hayes Optima 336 V.34 + FAX + Voice PnP */ + { "HAY000C", 0 }, + /* Hayes Optima 336B V.34 + FAX + Voice PnP */ + { "HAY000D", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5670", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5674", 0 }, + /* Hayes Accura 56K Fax Modem PnP */ + { "HAY5675", 0 }, + /* Hayes 288, V.34 + FAX */ + { "HAYF000", 0 }, + /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ + { "HAYF001", 0 }, + /* IBM */ + /* IBM Thinkpad 701 Internal Modem Voice */ + { "IBM0033", 0 }, + /* Intermec */ + /* Intermec CV60 touchscreen port */ + { "PNP4972", 0 }, + /* Intertex */ + /* Intertex 28k8 33k6 Voice EXT PnP */ + { "IXDC801", 0 }, + /* Intertex 33k6 56k Voice EXT PnP */ + { "IXDC901", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDD801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDD901", 0 }, + /* Intertex 28k8 33k6 Voice SP INT PnP */ + { "IXDF401", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDF801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDF901", 0 }, + /* Kortex International */ + /* KORTEX 28800 Externe PnP */ + { "KOR4522", 0 }, + /* KXPro 33.6 Vocal ASVD PnP */ + { "KORF661", 0 }, + /* Lasat */ + /* LASAT Internet 33600 PnP */ + { "LAS4040", 0 }, + /* Lasat Safire 560 PnP */ + { "LAS4540", 0 }, + /* Lasat Safire 336 PnP */ + { "LAS5440", 0 }, + /* Microcom, Inc. */ + /* Microcom TravelPorte FAST V.34 Plug & Play */ + { "MNP0281", 0 }, + /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ + { "MNP0336", 0 }, + /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ + { "MNP0339", 0 }, + /* Microcom DeskPorte 28.8P Plug & Play */ + { "MNP0342", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0500", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0501", 0 }, + /* Microcom DeskPorte 28.8S Internal Plug & Play */ + { "MNP0502", 0 }, + /* Motorola */ + /* Motorola BitSURFR Plug & Play */ + { "MOT1105", 0 }, + /* Motorola TA210 Plug & Play */ + { "MOT1111", 0 }, + /* Motorola HMTA 200 (ISDN) Plug & Play */ + { "MOT1114", 0 }, + /* Motorola BitSURFR Plug & Play */ + { "MOT1115", 0 }, + /* Motorola Lifestyle 28.8 Internal */ + { "MOT1190", 0 }, + /* Motorola V.3400 Plug & Play */ + { "MOT1501", 0 }, + /* Motorola Lifestyle 28.8 V.34 Plug & Play */ + { "MOT1502", 0 }, + /* Motorola Power 28.8 V.34 Plug & Play */ + { "MOT1505", 0 }, + /* Motorola ModemSURFR External 28.8 Plug & Play */ + { "MOT1509", 0 }, + /* Motorola Premier 33.6 Desktop Plug & Play */ + { "MOT150A", 0 }, + /* Motorola VoiceSURFR 56K External PnP */ + { "MOT150F", 0 }, + /* Motorola ModemSURFR 56K External PnP */ + { "MOT1510", 0 }, + /* Motorola ModemSURFR 56K Internal PnP */ + { "MOT1550", 0 }, + /* Motorola ModemSURFR Internal 28.8 Plug & Play */ + { "MOT1560", 0 }, + /* Motorola Premier 33.6 Internal Plug & Play */ + { "MOT1580", 0 }, + /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ + { "MOT15B0", 0 }, + /* Motorola VoiceSURFR 56K Internal PnP */ + { "MOT15F0", 0 }, + /* Com 1 */ + /* Deskline K56 Phone System PnP */ + { "MVX00A1", 0 }, + /* PC Rider K56 Phone System PnP */ + { "MVX00F2", 0 }, + /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */ + { "nEC8241", 0 }, + /* Pace 56 Voice Internal Plug & Play Modem */ + { "PMC2430", 0 }, + /* Generic */ + /* Generic standard PC COM port */ + { "PNP0500", 0 }, + /* Generic 16550A-compatible COM port */ + { "PNP0501", 0 }, + /* Compaq 14400 Modem */ + { "PNPC000", 0 }, + /* Compaq 2400/9600 Modem */ + { "PNPC001", 0 }, + /* Dial-Up Networking Serial Cable between 2 PCs */ + { "PNPC031", 0 }, + /* Dial-Up Networking Parallel Cable between 2 PCs */ + { "PNPC032", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC100", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC101", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC102", 0 }, + /* Standard Modem*/ + { "PNPC103", 0 }, + /* Standard 9600 bps Modem*/ + { "PNPC104", 0 }, + /* Standard 14400 bps Modem*/ + { "PNPC105", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC106", 0 }, + /* Standard Modem */ + { "PNPC107", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC108", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC109", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10A", 0 }, + /* Standard Modem */ + { "PNPC10B", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC10C", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC10D", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10E", 0 }, + /* Standard Modem */ + { "PNPC10F", 0 }, + /* Standard PCMCIA Card Modem */ + { "PNP2000", 0 }, + /* Rockwell */ + /* Modular Technology */ + /* Rockwell 33.6 DPF Internal PnP */ + /* Modular Technology 33.6 Internal PnP */ + { "ROK0030", 0 }, + /* Kortex International */ + /* KORTEX 14400 Externe PnP */ + { "ROK0100", 0 }, + /* Rockwell 28.8 */ + { "ROK4120", 0 }, + /* Viking Components, Inc */ + /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ + { "ROK4920", 0 }, + /* Rockwell */ + /* British Telecom */ + /* Modular Technology */ + /* Rockwell 33.6 DPF External PnP */ + /* BT Prologue 33.6 External PnP */ + /* Modular Technology 33.6 External PnP */ + { "RSS00A0", 0 }, + /* Viking 56K FAX INT */ + { "RSS0262", 0 }, + /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */ + { "RSS0250", 0 }, + /* SupraExpress 28.8 Data/Fax PnP modem */ + { "SUP1310", 0 }, + /* SupraExpress 336i PnP Voice Modem */ + { "SUP1381", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1421", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1590", 0 }, + /* SupraExpress 336i Sp ASVD */ + { "SUP1620", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1760", 0 }, + /* SupraExpress 56i Sp Intl */ + { "SUP2171", 0 }, + /* Phoebe Micro */ + /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ + { "TEX0011", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "UAC000F", 0 }, + /* 3Com Corp. */ + /* Gateway Telepath IIvi 33.6 */ + { "USR0000", 0 }, + /* U.S. Robotics Sporster 33.6K Fax INT PnP */ + { "USR0002", 0 }, + /* Sportster Vi 14.4 PnP FAX Voicemail */ + { "USR0004", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR0006", 0 }, + /* U.S. Robotics 33.6K Voice EXT PnP */ + { "USR0007", 0 }, + /* U.S. Robotics Courier V.Everything INT PnP */ + { "USR0009", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR2002", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR2070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR2080", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3031", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3050", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR3080", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3090", 0 }, + /* U.S. Robotics 56K Message */ + { "USR9100", 0 }, + /* U.S. Robotics 56K FAX EXT PnP*/ + { "USR9160", 0 }, + /* U.S. Robotics 56K FAX INT PnP*/ + { "USR9170", 0 }, + /* U.S. Robotics 56K Voice EXT PnP*/ + { "USR9180", 0 }, + /* U.S. Robotics 56K Voice INT PnP*/ + { "USR9190", 0 }, + /* Wacom tablets */ + { "WACFXXX", 0 }, + /* Compaq touchscreen */ + { "FPI2002", 0 }, + /* Fujitsu Stylistic touchscreens */ + { "FUJ02B2", 0 }, + { "FUJ02B3", 0 }, + /* Fujitsu Stylistic LT touchscreens */ + { "FUJ02B4", 0 }, + /* Passive Fujitsu Stylistic touchscreens */ + { "FUJ02B6", 0 }, + { "FUJ02B7", 0 }, + { "FUJ02B8", 0 }, + { "FUJ02B9", 0 }, + { "FUJ02BC", 0 }, + /* Fujitsu Wacom Tablet PC device */ + { "FUJ02E5", 0 }, + /* Fujitsu P-series tablet PC device */ + { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, + /* + * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in + * disguise) + */ + { "LTS0001", 0 }, + /* Rockwell's (PORALiNK) 33600 INT PNP */ + { "WCI0003", 0 }, + /* Unknown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + /* More unknown PnP modems */ + { "PNPDXXX", UNKNOWN_DEV }, + { "", 0 } +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +static char *modem_names[] __devinitdata = { + "MODEM", "Modem", "modem", "FAX", "Fax", "fax", + "56K", "56k", "K56", "33.6", "28.8", "14.4", + "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", + "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL +}; + +static int __devinit check_name(char *name) +{ + char **tmp; + + for (tmp = modem_names; *tmp; tmp++) + if (strstr(name, *tmp)) + return 1; + + return 0; +} + +static int __devinit check_resources(struct pnp_dev *dev) +{ + resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; + int i; + + for (i = 0; i < ARRAY_SIZE(base); i++) { + if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8)) + return 1; + } + + return 0; +} + +/* + * Given a complete unknown PnP device, try to use some heuristics to + * detect modems. Currently use such heuristic set: + * - dev->name or dev->bus->name must contain "modem" substring; + * - device must have only one IO region (8 byte long) with base address + * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. + * + * Such detection looks very ugly, but can detect at least some of numerous + * PnP modems, alternatively we must hardcode all modems in pnp_devices[] + * table. + */ +static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) +{ + if (!(check_name(pnp_dev_name(dev)) || + (dev->card && check_name(dev->card->name)))) + return -ENODEV; + + if (check_resources(dev)) + return 0; + + return -ENODEV; +} + +static int __devinit +serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) +{ + struct uart_port port; + int ret, line, flags = dev_id->driver_data; + + if (flags & UNKNOWN_DEV) { + ret = serial_pnp_guess_board(dev, &flags); + if (ret < 0) + return ret; + } + + memset(&port, 0, sizeof(struct uart_port)); + if (pnp_irq_valid(dev, 0)) + port.irq = pnp_irq(dev, 0); + if (pnp_port_valid(dev, 0)) { + port.iobase = pnp_port_start(dev, 0); + port.iotype = UPIO_PORT; + } else if (pnp_mem_valid(dev, 0)) { + port.mapbase = pnp_mem_start(dev, 0); + port.iotype = UPIO_MEM; + port.flags = UPF_IOREMAP; + } else + return -ENODEV; + +#ifdef SERIAL_DEBUG_PNP + printk(KERN_DEBUG + "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", + port.iobase, port.mapbase, port.irq, port.iotype); +#endif + + port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) + port.flags |= UPF_SHARE_IRQ; + port.uartclk = 1843200; + port.dev = &dev->dev; + + line = serial8250_register_port(&port); + if (line < 0) + return -ENODEV; + + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return 0; +} + +static void __devexit serial_pnp_remove(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + if (line) + serial8250_unregister_port(line - 1); +} + +#ifdef CONFIG_PM +static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_suspend_port(line - 1); + return 0; +} + +static int serial_pnp_resume(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_resume_port(line - 1); + return 0; +} +#else +#define serial_pnp_suspend NULL +#define serial_pnp_resume NULL +#endif /* CONFIG_PM */ + +static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .probe = serial_pnp_probe, + .remove = __devexit_p(serial_pnp_remove), + .suspend = serial_pnp_suspend, + .resume = serial_pnp_resume, + .id_table = pnp_dev_table, +}; + +static int __init serial8250_pnp_init(void) +{ + return pnp_register_driver(&serial_pnp_driver); +} + +static void __exit serial8250_pnp_exit(void) +{ + pnp_unregister_driver(&serial_pnp_driver); +} + +module_init(serial8250_pnp_init); +module_exit(serial8250_pnp_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver"); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig new file mode 100644 index 0000000..591f801 --- /dev/null +++ b/drivers/tty/serial/8250/Kconfig @@ -0,0 +1,280 @@ +# +# The 8250/16550 serial drivers. You shouldn't be in this list unless +# you somehow have an implicit or explicit dependency on SERIAL_8250. +# + +config SERIAL_8250 + tristate "8250/16550 and compatible serial support" + select SERIAL_CORE + ---help--- + This selects whether you want to include the driver for the standard + serial ports. The standard answer is Y. People who might say N + here are those that are setting up dedicated Ethernet WWW/FTP + servers, or users that have one of the various bus mice instead of a + serial mouse and don't intend to use their machine's standard serial + port for anything. (Note that the Cyclades and Stallion multi + serial port drivers do not need this driver built in for them to + work.) + + To compile this driver as a module, choose M here: the + module will be called 8250. + [WARNING: Do not compile this driver as a module if you are using + non-standard serial ports, since the configuration information will + be lost when the driver is unloaded. This limitation may be lifted + in the future.] + + BTW1: If you have a mouseman serial mouse which is not recognized by + the X window system, try running gpm first. + + BTW2: If you intend to use a software modem (also called Winmodem) + under Linux, forget it. These modems are crippled and require + proprietary drivers which are only available under Windows. + + Most people will say Y or M here, so that they can use serial mice, + modems and similar devices connecting to the standard serial ports. + +config SERIAL_8250_CONSOLE + bool "Console on 8250/16550 and compatible serial port" + depends on SERIAL_8250=y + select SERIAL_CORE_CONSOLE + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (grub or lilo or loadlin) about how to pass options + to the kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + You can set that using a kernel command line option such as + "console=uart8250,io,0x3f8,9600n8" + "console=uart8250,mmio,0xff5e0000,115200n8". + and it will switch to normal serial console when the corresponding + port is ready. + "earlycon=uart8250,io,0x3f8,9600n8" + "earlycon=uart8250,mmio,0xff5e0000,115200n8". + it will not only setup early console. + + If unsure, say N. + +config FIX_EARLYCON_MEM + bool + depends on X86 + default y + +config SERIAL_8250_GSC + tristate + depends on SERIAL_8250 && GSC + default SERIAL_8250 + +config SERIAL_8250_PCI + tristate "8250/16550 PCI device support" if EXPERT + depends on SERIAL_8250 && PCI + default SERIAL_8250 + help + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. + +config SERIAL_8250_PNP + tristate "8250/16550 PNP device support" if EXPERT + depends on SERIAL_8250 && PNP + default SERIAL_8250 + help + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. + +config SERIAL_8250_HP300 + tristate + depends on SERIAL_8250 && HP300 + default SERIAL_8250 + +config SERIAL_8250_CS + tristate "8250/16550 PCMCIA device support" + depends on PCMCIA && SERIAL_8250 + ---help--- + Say Y here to enable support for 16-bit PCMCIA serial devices, + including serial port cards, modems, and the modem functions of + multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are + credit-card size devices often used with laptops.) + + To compile this driver as a module, choose M here: the + module will be called serial_cs. + + If unsure, say N. + +config SERIAL_8250_NR_UARTS + int "Maximum number of 8250/16550 serial ports" + depends on SERIAL_8250 + default "4" + help + Set this to the number of serial ports you want the driver + to support. This includes any ports discovered via ACPI or + PCI enumeration and any ports that may be added at run-time + via hot-plug, or any ISA multi-port serial cards. + +config SERIAL_8250_RUNTIME_UARTS + int "Number of 8250/16550 serial ports to register at runtime" + depends on SERIAL_8250 + range 0 SERIAL_8250_NR_UARTS + default "4" + help + Set this to the maximum number of serial ports you want + the kernel to register at boot time. This can be overridden + with the module parameter "nr_uarts", or boot-time parameter + 8250.nr_uarts + +config SERIAL_8250_EXTENDED + bool "Extended 8250/16550 serial driver options" + depends on SERIAL_8250 + help + If you wish to use any non-standard features of the standard "dumb" + driver, say Y here. This includes HUB6 support, shared serial + interrupts, special multiport support, support for more than the + four COM 1/2/3/4 boards, etc. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial driver options. If unsure, say N. + +config SERIAL_8250_MANY_PORTS + bool "Support more than 4 legacy serial ports" + depends on SERIAL_8250_EXTENDED && !IA64 + help + Say Y here if you have dumb serial boards other than the four + standard COM 1/2/3/4 ports. This may happen if you have an AST + FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available + from <http://www.tldp.org/docs.html#howto>), or other custom + serial port hardware which acts similar to standard serial port + hardware. If you only use the standard COM 1/2/3/4 ports, you can + say N here to save some memory. You can also say Y if you have an + "intelligent" multiport card such as Cyclades, Digiboards, etc. + +# +# Multi-port serial cards +# + +config SERIAL_8250_FOURPORT + tristate "Support Fourport cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an AST FourPort serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_fourport. + +config SERIAL_8250_ACCENT + tristate "Support Accent cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an Accent Async serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_accent. + +config SERIAL_8250_BOCA + tristate "Support Boca cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a Boca serial board. Please read the Boca + mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> + + To compile this driver as a module, choose M here: the module + will be called 8250_boca. + +config SERIAL_8250_EXAR_ST16C554 + tristate "Support Exar ST16C554/554D Quad UART" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + The Uplogix Envoy TU301 uses this Exar Quad UART. If you are + tinkering with your Envoy TU301, or have a machine with this UART, + say Y here. + + To compile this driver as a module, choose M here: the module + will be called 8250_exar_st16c554. + +config SERIAL_8250_HUB6 + tristate "Support Hub6 cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a HUB6 serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_hub6. + +# +# Misc. options/drivers. +# + +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + +config SERIAL_8250_MCA + tristate "Support 8250-type ports on MCA buses" + depends on SERIAL_8250 != n && MCA + help + Say Y here if you have a MCA serial ports. + + To compile this driver as a module, choose M here: the module + will be called 8250_mca. + +config SERIAL_8250_ACORN + tristate "Acorn expansion card serial port support" + depends on ARCH_ACORN && SERIAL_8250 + help + If you have an Atomwide Serial card or Serial Port card for an Acorn + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + +config SERIAL_8250_RM9K + bool "Support for MIPS RM9xxx integrated serial port" + depends on SERIAL_8250 != n && SERIAL_RM9000 + select SERIAL_8250_SHARE_IRQ + help + Selecting this option will add support for the integrated serial + port hardware found on MIPS RM9122 and similar processors. + If unsure, say N. + +config SERIAL_8250_FSL + bool + depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 + default PPC + +config SERIAL_8250_DW + tristate "Support for Synopsys DesignWare 8250 quirks" + depends on SERIAL_8250 && OF + help + Selecting this option will enable handling of the extra features + present in the Synopsys DesignWare APB UART. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile new file mode 100644 index 0000000..867bba7 --- /dev/null +++ b/drivers/tty/serial/8250/Makefile @@ -0,0 +1,20 @@ +# +# Makefile for the 8250 serial device drivers. +# + +obj-$(CONFIG_SERIAL_8250) += 8250.o +obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o +obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o +obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o +obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o +obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o +obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o +obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o +obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o +obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o +obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o +obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o diff --git a/drivers/tty/serial/8250/m32r_sio.c b/drivers/tty/serial/8250/m32r_sio.c new file mode 100644 index 0000000..94a6792 --- /dev/null +++ b/drivers/tty/serial/8250/m32r_sio.c @@ -0,0 +1,1191 @@ +/* + * m32r_sio.c + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.c. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. Currently, we don't + * support this very well, and it may well be dropped from this driver + * in future. As such, mapbase should be NULL. + * + * membase is an 'ioremapped' cookie. This is compatible with the old + * serial.c driver, and is currently the preferred form. + */ + +#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/serial.h> +#include <linux/serialP.h> +#include <linux/delay.h> + +#include <asm/m32r.h> +#include <asm/io.h> +#include <asm/irq.h> + +#define PORT_M32R_BASE PORT_M32R_SIO +#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) +#define BAUD_RATE 115200 + +#include <linux/serial_core.h> +#include "m32r_sio.h" +#include "m32r_sio_reg.h" + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#define BASE_BAUD 115200 + +/* Standard COM flags */ +#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) + +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#if defined(CONFIG_PLAT_USRV) + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ + +#else /* !CONFIG_PLAT_USRV */ + +#if defined(CONFIG_SERIAL_M32R_PLDSIO) +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ + STD_COM_FLAGS }, /* ttyS0 */ +#else +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ + STD_COM_FLAGS }, /* ttyS0 */ +#endif + +#endif /* !CONFIG_PLAT_USRV */ + +static struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS +}; + +#define UART_NR ARRAY_SIZE(old_serial_port) + +struct uart_sio_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +static struct irq_info irq_lists[NR_IRQS]; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, + [PORT_INDEX(PORT_M32R_SIO)] = { + .name = "M32RSIO", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, +}; + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define __sio_in(x) inw((unsigned long)(x)) +#define __sio_out(v,x) outw((v),(unsigned long)(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned short sbaud; + sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; + __sio_out(sbaud, PLD_ESIO0BAUR); +} + +static void sio_reset(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_init(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); +} + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define __sio_in(x) inl(x) +#define __sio_out(v,x) outl((v),(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned long i, j; + + i = boot_cpu_data.bus_clock / (baud * 16); + j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; + i -= 1; + j = (j + 1) >> 1; + + __sio_out(i, M32R_SIO0_BAUR_PORTL); + __sio_out(j, M32R_SIO0_RBAUR_PORTL); +} + +static void sio_reset(void) +{ + __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ + __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ + __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ +} + +static void sio_init(void) +{ + unsigned int tmp; + + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_STS_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); +} + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +static unsigned int sio_in(struct uart_sio_port *up, int offset) +{ + return __sio_in(up->port.iobase + offset); +} + +static void sio_out(struct uart_sio_port *up, int offset, int value) +{ + __sio_out(value, up->port.iobase + offset); +} + +static unsigned int serial_in(struct uart_sio_port *up, int offset) +{ + if (!offset) + return 0; + + return __sio_in(offset); +} + +static void serial_out(struct uart_sio_port *up, int offset, int value) +{ + if (!offset) + return; + + __sio_out(value, offset); +} + +static void m32r_sio_stop_tx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void m32r_sio_start_tx(struct uart_port *port) +{ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct circ_buf *xmit = &up->port.state->xmit; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } + while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); +#else + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +#endif +} + +static void m32r_sio_stop_rx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void m32r_sio_enable_ms(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void receive_chars(struct uart_sio_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch; + unsigned char flag; + int max_count = 256; + + do { + ch = sio_in(up, SIORXB); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) + tty_insert_flip_char(tty, ch, flag); + + if (*status & UART_LSR_OE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_sio_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { +#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ + serial_out(up, UART_TX, up->port.x_char); +#endif + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + m32r_sio_stop_tx(&up->port); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); + + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + m32r_sio_stop_tx(&up->port); +} + +/* + * This handles the interrupt from one port. + */ +static inline void m32r_sio_handle_port(struct uart_sio_port *up, + unsigned int status) +{ + DEBUG_INTR("status = %x...", status); + + if (status & 0x04) + receive_chars(up, &status); + if (status & 0x01) + transmit_chars(up); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0; + + DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO +// if (irq == PLD_IRQ_SIO0_SND) +// irq = PLD_IRQ_SIO0_RCV; +#else + if (irq == M32R_IRQ_SIO0_S) + irq = M32R_IRQ_SIO0_R; +#endif + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_sio_port *up; + unsigned int sts; + + up = list_entry(l, struct uart_sio_port, list); + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + if (sts & 0xe0) + sio_error(&sts); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_HANDLED; +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + int ret, irq_flags = 0; + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(up->port.irq, m32r_sio_interrupt, + irq_flags, "SIO0-RX", i); + ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, + irq_flags, "SIO0-TX", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) { + free_irq(up->port.irq, i); + free_irq(up->port.irq + 1, i); + } + + serial_do_unlink(i, up); +} + +/* + * This function is used to handle ports that do not have an interrupt. + */ +static void m32r_sio_timeout(unsigned long data) +{ + struct uart_sio_port *up = (struct uart_sio_port *)data; + unsigned int timeout; + unsigned int sts; + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + } + + timeout = up->port.timeout; + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + mod_timer(&up->timer, jiffies + timeout); +} + +static unsigned int m32r_sio_tx_empty(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int m32r_sio_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + +} + +static void m32r_sio_break_ctl(struct uart_port *port, int break_state) +{ + +} + +static int m32r_sio_startup(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + int retval; + + sio_init(); + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + unsigned int timeout = up->port.timeout; + + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + timeout); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + * - M32R_SIO: 0x0c + * - M32R_PLDSIO: 0x04 + */ + up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + sio_out(up, SIOTRCR, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + sio_reset(); + + return 0; +} + +static void m32r_sio_shutdown(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + sio_out(up, SIOTRCR, 0); + + /* + * Disable break condition and FIFOs + */ + + sio_init(); + + if (!is_real_interrupt(up->port.irq)) + del_timer_sync(&up->timer); + else + serial_unlink_irq_chain(up); +} + +static unsigned int m32r_sio_get_divisor(struct uart_port *port, + unsigned int baud) +{ + return uart_get_divisor(port, baud); +} + +static void m32r_sio_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned char cval = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); +#else + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); +#endif + quot = m32r_sio_get_divisor(port, baud); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + sio_set_baud_rate(baud); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + up->lcr = cval; /* Save LCR */ + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void m32r_sio_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->pm) + up->pm(port, state, oldstate); +} + +/* + * Resource handling. This is complicated by the fact that resources + * depend on the port type. Maybe we should be claiming the standard + * 8250 ports, and then trying to get other resources as necessary? + */ +static int +m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) +{ + unsigned int size = 8 << up->port.regshift; +#ifndef CONFIG_SERIAL_M32R_PLDSIO + unsigned long start; +#endif + int ret = 0; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { +#ifdef CONFIG_SERIAL_M32R_PLDSIO + *res = request_mem_region(up->port.mapbase, size, "serial"); +#else + start = up->port.mapbase; + *res = request_mem_region(start, size, "serial"); +#endif + if (!*res) + ret = -EBUSY; + } + break; + + case UPIO_PORT: + *res = request_region(up->port.iobase, size, "serial"); + if (!*res) + ret = -EBUSY; + break; + } + return ret; +} + +static void m32r_sio_release_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long start, offset = 0, size = 0; + + size <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { + /* + * Unmap the area. + */ + iounmap(up->port.membase); + up->port.membase = NULL; + + start = up->port.mapbase; + + if (size) + release_mem_region(start + offset, size); + release_mem_region(start, 8 << up->port.regshift); + } + break; + + case UPIO_PORT: + start = up->port.iobase; + + if (size) + release_region(start + offset, size); + release_region(start + offset, 8 << up->port.regshift); + break; + + default: + break; + } +} + +static int m32r_sio_request_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct resource *res = NULL; + int ret = 0; + + ret = m32r_sio_request_std_resource(up, &res); + + /* + * If we have a mapbase, then request that as well. + */ + if (ret == 0 && up->port.flags & UPF_IOREMAP) { + int size = resource_size(res); + + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) + ret = -ENOMEM; + } + + if (ret < 0) { + if (res) + release_resource(res); + } + + return ret; +} + +static void m32r_sio_config_port(struct uart_port *port, int unused) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int +m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config)) + return -EINVAL; + return 0; +} + +static const char * +m32r_sio_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops m32r_sio_pops = { + .tx_empty = m32r_sio_tx_empty, + .set_mctrl = m32r_sio_set_mctrl, + .get_mctrl = m32r_sio_get_mctrl, + .stop_tx = m32r_sio_stop_tx, + .start_tx = m32r_sio_start_tx, + .stop_rx = m32r_sio_stop_rx, + .enable_ms = m32r_sio_enable_ms, + .break_ctl = m32r_sio_break_ctl, + .startup = m32r_sio_startup, + .shutdown = m32r_sio_shutdown, + .set_termios = m32r_sio_set_termios, + .pm = m32r_sio_pm, + .type = m32r_sio_type, + .release_port = m32r_sio_release_port, + .request_port = m32r_sio_request_port, + .config_port = m32r_sio_config_port, + .verify_port = m32r_sio_verify_port, +}; + +static struct uart_sio_port m32r_sio_ports[UART_NR]; + +static void __init m32r_sio_init_ports(void) +{ + struct uart_sio_port *up; + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + up->port.ops = &m32r_sio_pops; + } +} + +static void __init m32r_sio_register_ports(struct uart_driver *drv) +{ + int i; + + m32r_sio_init_ports(); + + for (i = 0; i < UART_NR; i++) { + struct uart_sio_port *up = &m32r_sio_ports[i]; + + up->port.line = i; + up->port.ops = &m32r_sio_pops; + init_timer(&up->timer); + up->timer.function = m32r_sio_timeout; + + up->mcr_mask = ~0; + up->mcr_force = 0; + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_sio_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = sio_in(up, SIOSTS); + + if (--tmout == 0) + break; + udelay(1); + } while ((status & UART_EMPTY) != UART_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) + udelay(1); + } +} + +static void m32r_sio_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + wait_for_xmitr(up); + sio_out(up, SIOTXB, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void m32r_sio_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sio_port *up = &m32r_sio_ports[co->index]; + unsigned int ier; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, SIOTRCR); + sio_out(up, SIOTRCR, 0); + + uart_console_write(&up->port, s, count, m32r_sio_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, SIOTRCR, ier); +} + +static int __init m32r_sio_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &m32r_sio_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver m32r_sio_reg; +static struct console m32r_sio_console = { + .name = "ttyS", + .write = m32r_sio_console_write, + .device = uart_console_device, + .setup = m32r_sio_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &m32r_sio_reg, +}; + +static int __init m32r_sio_console_init(void) +{ + sio_reset(); + sio_init(); + m32r_sio_init_ports(); + register_console(&m32r_sio_console); + return 0; +} +console_initcall(m32r_sio_console_init); + +#define M32R_SIO_CONSOLE &m32r_sio_console +#else +#define M32R_SIO_CONSOLE NULL +#endif + +static struct uart_driver m32r_sio_reg = { + .owner = THIS_MODULE, + .driver_name = "sio", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = M32R_SIO_CONSOLE, +}; + +/** + * m32r_sio_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void m32r_sio_suspend_port(int line) +{ + uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +/** + * m32r_sio_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void m32r_sio_resume_port(int line) +{ + uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +static int __init m32r_sio_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: M32R SIO driver\n"); + + for (i = 0; i < nr_irqs; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = uart_register_driver(&m32r_sio_reg); + if (ret >= 0) + m32r_sio_register_ports(&m32r_sio_reg); + + return ret; +} + +static void __exit m32r_sio_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); + + uart_unregister_driver(&m32r_sio_reg); +} + +module_init(m32r_sio_init); +module_exit(m32r_sio_exit); + +EXPORT_SYMBOL(m32r_sio_suspend_port); +EXPORT_SYMBOL(m32r_sio_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic M32R SIO serial driver"); diff --git a/drivers/tty/serial/8250/m32r_sio.h b/drivers/tty/serial/8250/m32r_sio.h new file mode 100644 index 0000000..e9b7e11 --- /dev/null +++ b/drivers/tty/serial/8250/m32r_sio.h @@ -0,0 +1,48 @@ +/* + * m32r_sio.h + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.h. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +struct m32r_sio_probe { + struct module *owner; + int (*pci_init_one)(struct pci_dev *dev); + void (*pci_remove_one)(struct pci_dev *dev); + void (*pnp_init)(void); +}; + +int m32r_sio_register_probe(struct m32r_sio_probe *probe); +void m32r_sio_unregister_probe(struct m32r_sio_probe *probe); +void m32r_sio_get_irq_map(unsigned int *map); +void m32r_sio_suspend_port(int line); +void m32r_sio_resume_port(int line); + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char io_type; + unsigned char __iomem *iomem_base; + unsigned short iomem_reg_shift; +}; + +#define _INLINE_ inline + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) diff --git a/drivers/tty/serial/8250/m32r_sio_reg.h b/drivers/tty/serial/8250/m32r_sio_reg.h new file mode 100644 index 0000000..4671473 --- /dev/null +++ b/drivers/tty/serial/8250/m32r_sio_reg.h @@ -0,0 +1,152 @@ +/* + * m32r_sio_reg.h + * + * Copyright (C) 1992, 1994 by Theodore Ts'o. + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + * + * Redistribution of this file is permitted under the terms of the GNU + * Public License (GPL) + * + * These are the UART port assignments, expressed as offsets from the base + * register. These assignments should hold for any serial port based on + * a 8250, 16450, or 16550(A). + */ + +#ifndef _M32R_SIO_REG_H +#define _M32R_SIO_REG_H + + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define SIOCR 0x000 +#define SIOMOD0 0x002 +#define SIOMOD1 0x004 +#define SIOSTS 0x006 +#define SIOTRCR 0x008 +#define SIOBAUR 0x00a +// #define SIORBAUR 0x018 +#define SIOTXB 0x00c +#define SIORXB 0x00e + +#define UART_RX ((unsigned long) PLD_ESIO0RXB) + /* In: Receive buffer (DLAB=0) */ +#define UART_TX ((unsigned long) PLD_ESIO0TXB) + /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER ((unsigned long) PLD_ESIO0INTCR) + /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR ((unsigned long) PLD_ESIO0STS) + /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define SIOCR 0x000 +#define SIOMOD0 0x004 +#define SIOMOD1 0x008 +#define SIOSTS 0x00c +#define SIOTRCR 0x010 +#define SIOBAUR 0x014 +#define SIORBAUR 0x018 +#define SIOTXB 0x01c +#define SIORXB 0x020 + +#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ +#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * These are the definitions for the Line Control Register + * + * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting + * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. + */ +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x02 /* Transmitter empty */ +#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x00 /* Break interrupt indicator */ +#define UART_LSR_FE 0x80 /* Frame error indicator */ +#define UART_LSR_PE 0x40 /* Parity error indicator */ +#define UART_LSR_OE 0x20 /* Overrun error indicator */ +#define UART_LSR_DR 0x04 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ + +#endif /* _M32R_SIO_REG_H */ diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c new file mode 100644 index 0000000..8609060 --- /dev/null +++ b/drivers/tty/serial/8250/serial_cs.c @@ -0,0 +1,870 @@ +/*====================================================================== + + A driver for PCMCIA serial devices + + serial_cs.c 1.134 2002/05/04 05:48:53 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/serial_core.h> +#include <linux/delay.h> +#include <linux/major.h> +#include <asm/io.h> +#include <asm/system.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/ciscode.h> +#include <pcmcia/ds.h> +#include <pcmcia/cisreg.h> + +#include "8250.h" + + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Enable the speaker? */ +static int do_sound = 1; +/* Skip strict UART tests? */ +static int buggy_uart; + +module_param(do_sound, int, 0444); +module_param(buggy_uart, int, 0444); + +/*====================================================================*/ + +/* Table of multi-port card ID's */ + +struct serial_quirk { + unsigned int manfid; + unsigned int prodid; + int multi; /* 1 = multifunction, > 1 = # ports */ + void (*config)(struct pcmcia_device *); + void (*setup)(struct pcmcia_device *, struct uart_port *); + void (*wakeup)(struct pcmcia_device *); + int (*post)(struct pcmcia_device *); +}; + +struct serial_info { + struct pcmcia_device *p_dev; + int ndev; + int multi; + int slave; + int manfid; + int prodid; + int c950ctrl; + int line[4]; + const struct serial_quirk *quirk; +}; + +struct serial_cfg_mem { + tuple_t tuple; + cisparse_t parse; + u_char buf[256]; +}; + +/* + * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" + * manfid 0x0160, 0x0104 + * This card appears to have a 14.7456MHz clock. + */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ +static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) +{ + port->uartclk = 14745600; +} + +static int quirk_post_ibm(struct pcmcia_device *link) +{ + u8 val; + int ret; + + ret = pcmcia_read_config_byte(link, 0x800, &val); + if (ret) + goto failed; + + ret = pcmcia_write_config_byte(link, 0x800, val | 1); + if (ret) + goto failed; + return 0; + + failed: + return -ENODEV; +} + +/* + * Nokia cards are not really multiport cards. Shouldn't this + * be handled by setting the quirk entry .multi = 0 | 1 ? + */ +static void quirk_config_nokia(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi > 1) + info->multi = 1; +} + +static void quirk_wakeup_oxsemi(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); +} + +/* request_region? oxsemi branch does no request_region too... */ +/* + * This sequence is needed to properly initialize MC45 attached to OXCF950. + * I tried decreasing these msleep()s, but it worked properly (survived + * 1000 stop/start operations) with these timeouts (or bigger). + */ +static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + unsigned int ctrl = info->c950ctrl; + + outb(0xA, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(300); + outb(0xC, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(200); + outb(0xF, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(100); + outb(0xC, ctrl + 1); +} + +/* + * Socket Dual IO: this enables irq's for second port + */ +static void quirk_config_socket(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; +} + +static const struct serial_quirk quirks[] = { + { + .manfid = 0x0160, + .prodid = 0x0104, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = MANFID_IBM, + .prodid = ~0, + .multi = -1, + .post = quirk_post_ibm, + }, { + .manfid = MANFID_INTEL, + .prodid = PRODID_INTEL_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_NATINST, + .prodid = PRODID_NATINST_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_NOKIA, + .prodid = ~0, + .multi = -1, + .config = quirk_config_nokia, + }, { + .manfid = MANFID_OMEGA, + .prodid = PRODID_OMEGA_QSP_100, + .multi = 4, + }, { + .manfid = MANFID_OXSEMI, + .prodid = ~0, + .multi = -1, + .wakeup = quirk_wakeup_oxsemi, + }, { + .manfid = MANFID_POSSIO, + .prodid = PRODID_POSSIO_GCC, + .multi = -1, + .wakeup = quirk_wakeup_possio_gcc, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_D1, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_G, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_SOCKET, + .prodid = PRODID_SOCKET_DUAL_RS232, + .multi = 2, + .config = quirk_config_socket, + }, { + .manfid = MANFID_SOCKET, + .prodid = ~0, + .multi = -1, + .config = quirk_config_socket, + } +}; + + +static int serial_config(struct pcmcia_device * link); + + +static void serial_remove(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_release\n"); + + /* + * Recheck to see if the device is still configured. + */ + for (i = 0; i < info->ndev; i++) + serial8250_unregister_port(info->line[i]); + + if (!info->slave) + pcmcia_disable_device(link); +} + +static int serial_suspend(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_suspend_port(info->line[i]); + + return 0; +} + +static int serial_resume(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_resume_port(info->line[i]); + + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; +} + +static int serial_probe(struct pcmcia_device *link) +{ + struct serial_info *info; + + dev_dbg(&link->dev, "serial_attach()\n"); + + /* Create new serial device */ + info = kzalloc(sizeof (*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->p_dev = link; + link->priv = info; + + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + return serial_config(link); +} + +static void serial_detach(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + dev_dbg(&link->dev, "serial_detach\n"); + + /* + * Ensure that the ports have been released. + */ + serial_remove(link); + + /* free bits */ + kfree(info); +} + +/*====================================================================*/ + +static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, + unsigned int iobase, int irq) +{ + struct uart_port port; + int line; + + memset(&port, 0, sizeof (struct uart_port)); + port.iobase = iobase; + port.irq = irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + port.uartclk = 1843200; + port.dev = &handle->dev; + if (buggy_uart) + port.flags |= UPF_BUGGY_UART; + + if (info->quirk && info->quirk->setup) + info->quirk->setup(handle, &port); + + line = serial8250_register_port(&port); + if (line < 0) { + printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " + "0x%04lx, irq %d failed\n", (u_long)iobase, irq); + return -EINVAL; + } + + info->line[info->ndev] = line; + info->ndev++; + + return 0; +} + +/*====================================================================*/ + +static int pfc_config(struct pcmcia_device *p_dev) +{ + unsigned int port = 0; + struct serial_info *info = p_dev->priv; + + if ((p_dev->resource[1]->end != 0) && + (resource_size(p_dev->resource[1]) == 8)) { + port = p_dev->resource[1]->start; + info->slave = 1; + } else if ((info->manfid == MANFID_OSITECH) && + (resource_size(p_dev->resource[0]) == 0x40)) { + port = p_dev->resource[0]->start + 0x28; + info->slave = 1; + } + if (info->slave) + return setup_serial(p_dev, info, port, p_dev->irq); + + dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); + return -ENODEV; +} + +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (p_dev->resource[0]->start == 0) + return -ENODEV; + + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; + + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); +} + +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; + } + return -ENODEV; +} + +static int simple_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i = -ENODEV, try; + + /* First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases */ + link->config_flags |= CONF_AUTO_SET_VPP; + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + + /* Second pass: try to find an entry that isn't picky about + its base address, then try to grab any standard serial port + address, and finally try to get any free port. */ + if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) + goto found_port; + + dev_warn(&link->dev, "no usable port range found, giving up\n"); + return -1; + +found_port: + if (info->multi && (info->manfid == MANFID_3COM)) + link->config_index &= ~(0x08); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -1; + return setup_serial(link, info, link->resource[0]->start, link->irq); +} + +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; + + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; +} + +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + int *base2 = priv_data; + + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end || + p_dev->resource[0]->start + 8 != p_dev->resource[1]->start) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; +} + +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; + + /* First, look for a generic full-sized window */ + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { + /* If that didn't work, look for two windows */ + info->multi = 2; + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + dev_warn(&link->dev, "no usable port range " + "found, giving up\n"); + return -ENODEV; + } + } + + if (!link->irq) + dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -ENODEV; + + /* The Oxford Semiconductor OXCF950 cards are in fact single-port: + * 8 registers are for the UART, the others are extra registers. + * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. + */ + if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && + info->prodid == PRODID_POSSIO_GCC)) { + int err; + + if (link->config_index == 1 || + link->config_index == 3) { + err = setup_serial(link, info, base2, + link->irq); + base2 = link->resource[0]->start; + } else { + err = setup_serial(link, info, link->resource[0]->start, + link->irq); + } + info->c950ctrl = base2; + + /* + * FIXME: We really should wake up the port prior to + * handing it over to the serial layer. + */ + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; + } + + setup_serial(link, info, link->resource[0]->start, link->irq); + for (i = 0; i < info->multi - 1; i++) + setup_serial(link, info, base2 + (8 * i), + link->irq); + return 0; +} + +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) +{ + struct serial_info *info = p_dev->priv; + + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; + + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) + info->multi = 2; + + return 0; /* break */ +} + + +static int serial_config(struct pcmcia_device * link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_config\n"); + + /* Is this a compliant multifunction card? */ + info->multi = (link->socket->functions > 1); + + /* Is this a multiport card? */ + info->manfid = link->manf_id; + info->prodid = link->card_id; + + for (i = 0; i < ARRAY_SIZE(quirks); i++) + if ((quirks[i].manfid == ~0 || + quirks[i].manfid == info->manfid) && + (quirks[i].prodid == ~0 || + quirks[i].prodid == info->prodid)) { + info->quirk = &quirks[i]; + break; + } + + /* Another check for dual-serial cards: look for either serial or + multifunction cards that ask for appropriate IO port ranges */ + if ((info->multi == 0) && + (link->has_func_id) && + (link->socket->pcmcia_pfc == 0) && + ((link->func_id == CISTPL_FUNCID_MULTI) || + (link->func_id == CISTPL_FUNCID_SERIAL))) + pcmcia_loop_config(link, serial_check_for_multi, info); + + /* + * Apply any multi-port quirk. + */ + if (info->quirk && info->quirk->multi != -1) + info->multi = info->quirk->multi; + + dev_info(&link->dev, + "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", + link->manf_id, link->card_id, + link->socket->pcmcia_pfc, info->multi, info->quirk); + if (link->socket->pcmcia_pfc) + i = pfc_config(link); + else if (info->multi > 1) + i = multi_config(link); + else + i = simple_config(link); + + if (i || info->ndev == 0) + goto failed; + + /* + * Apply any post-init quirk. FIXME: This should really happen + * before we register the port, since it might already be in use. + */ + if (info->quirk && info->quirk->post) + if (info->quirk->post(link)) + goto failed; + + return 0; + +failed: + dev_warn(&link->dev, "failed to initialize\n"); + serial_remove(link); + return -ENODEV; +} + +static const struct pcmcia_device_id serial_ids[] = { + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), + PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), + PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), + PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), + PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), + PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), + PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ + PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), + PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ + PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ + PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), + PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), + PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), + PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), + PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), + PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), + PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), + PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), + PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), + PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), + PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), + PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), + PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), + PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), + PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), + PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), + PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), + PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), + /* too generic */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ + PCMCIA_DEVICE_FUNC_ID(2), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, serial_ids); + +MODULE_FIRMWARE("cis/PCMLM28.cis"); +MODULE_FIRMWARE("cis/DP83903.cis"); +MODULE_FIRMWARE("cis/3CCFEM556.cis"); +MODULE_FIRMWARE("cis/3CXEM556.cis"); +MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_555_SER.cis"); +MODULE_FIRMWARE("cis/MT5634ZLX.cis"); +MODULE_FIRMWARE("cis/COMpad2.cis"); +MODULE_FIRMWARE("cis/COMpad4.cis"); +MODULE_FIRMWARE("cis/RS-COM-2P.cis"); + +static struct pcmcia_driver serial_cs_driver = { + .owner = THIS_MODULE, + .name = "serial_cs", + .probe = serial_probe, + .remove = serial_detach, + .id_table = serial_ids, + .suspend = serial_suspend, + .resume = serial_resume, +}; + +static int __init init_serial_cs(void) +{ + return pcmcia_register_driver(&serial_cs_driver); +} + +static void __exit exit_serial_cs(void) +{ + pcmcia_unregister_driver(&serial_cs_driver); +} + +module_init(init_serial_cs); +module_exit(exit_serial_cs); + +MODULE_LICENSE("GPL"); |
