diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_pci.c')
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 257 |
1 files changed, 9 insertions, 248 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index bc51b32..4ea8b51 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -21,14 +21,10 @@ #include <linux/serial_core.h> #include <linux/8250_pci.h> #include <linux/bitops.h> -#include <linux/rational.h> #include <asm/byteorder.h> #include <asm/io.h> -#include <linux/dmaengine.h> -#include <linux/platform_data/dma-dw.h> - #include "8250.h" /* @@ -1349,160 +1345,6 @@ ce4100_serial_setup(struct serial_private *priv, return ret; } -#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a -#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c - -#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a -#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c - -#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3 -#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4 - -#define BYT_PRV_CLK 0x800 -#define BYT_PRV_CLK_EN (1 << 0) -#define BYT_PRV_CLK_M_VAL_SHIFT 1 -#define BYT_PRV_CLK_N_VAL_SHIFT 16 -#define BYT_PRV_CLK_UPDATE (1 << 31) - -#define BYT_TX_OVF_INT 0x820 -#define BYT_TX_OVF_INT_MASK (1 << 1) - -static void -byt_set_termios(struct uart_port *p, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud = tty_termios_baud_rate(termios); - unsigned long fref = 100000000, fuart = baud * 16; - unsigned long w = BIT(15) - 1; - unsigned long m, n; - u32 reg; - - /* Gracefully handle the B0 case: fall back to B9600 */ - fuart = fuart ? fuart : 9600 * 16; - - /* Get Fuart closer to Fref */ - fuart *= rounddown_pow_of_two(fref / fuart); - - /* - * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the - * dividers must be adjusted. - * - * uartclk = (m / n) * 100 MHz, where m <= n - */ - rational_best_approximation(fuart, fref, w, w, &m, &n); - p->uartclk = fuart; - - /* Reset the clock */ - reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT); - writel(reg, p->membase + BYT_PRV_CLK); - reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE; - writel(reg, p->membase + BYT_PRV_CLK); - - p->status &= ~UPSTAT_AUTOCTS; - if (termios->c_cflag & CRTSCTS) - p->status |= UPSTAT_AUTOCTS; - - serial8250_do_set_termios(p, termios, old); -} - -static bool byt_dma_filter(struct dma_chan *chan, void *param) -{ - struct dw_dma_slave *dws = param; - - if (dws->dma_dev != chan->device->dev) - return false; - - chan->private = dws; - return true; -} - -static unsigned int -byt_get_mctrl(struct uart_port *port) -{ - unsigned int ret = serial8250_do_get_mctrl(port); - - /* Force DCD and DSR signals to permanently be reported as active. */ - ret |= TIOCM_CAR | TIOCM_DSR; - - return ret; -} - -static int -byt_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_8250_port *port, int idx) -{ - struct pci_dev *pdev = priv->dev; - struct device *dev = port->port.dev; - struct uart_8250_dma *dma; - struct dw_dma_slave *tx_param, *rx_param; - struct pci_dev *dma_dev; - int ret; - - dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); - if (!dma) - return -ENOMEM; - - tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); - if (!tx_param) - return -ENOMEM; - - rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); - if (!rx_param) - return -ENOMEM; - - switch (pdev->device) { - case PCI_DEVICE_ID_INTEL_BYT_UART1: - case PCI_DEVICE_ID_INTEL_BSW_UART1: - case PCI_DEVICE_ID_INTEL_BDW_UART1: - rx_param->src_id = 3; - tx_param->dst_id = 2; - break; - case PCI_DEVICE_ID_INTEL_BYT_UART2: - case PCI_DEVICE_ID_INTEL_BSW_UART2: - case PCI_DEVICE_ID_INTEL_BDW_UART2: - rx_param->src_id = 5; - tx_param->dst_id = 4; - break; - default: - return -EINVAL; - } - - rx_param->m_master = 0; - rx_param->p_master = 1; - - dma->rxconf.src_maxburst = 16; - - tx_param->m_master = 0; - tx_param->p_master = 1; - - dma->txconf.dst_maxburst = 16; - - dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); - rx_param->dma_dev = &dma_dev->dev; - tx_param->dma_dev = &dma_dev->dev; - - dma->fn = byt_dma_filter; - dma->rx_param = rx_param; - dma->tx_param = tx_param; - - ret = pci_default_setup(priv, board, port, idx); - port->port.iotype = UPIO_MEM; - port->port.type = PORT_16550A; - port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); - port->port.set_termios = byt_set_termios; - port->port.get_mctrl = byt_get_mctrl; - port->port.fifosize = 64; - port->tx_loadsz = 64; - port->dma = dma; - port->capabilities = UART_CAP_FIFO | UART_CAP_AFE; - - /* Disable Tx counter interrupts */ - writel(BYT_TX_OVF_INT_MASK, port->port.membase + BYT_TX_OVF_INT); - - return ret; -} - static int pci_omegapci_setup(struct serial_private *priv, const struct pciserial_board *board, @@ -1934,7 +1776,6 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e -#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936 #define PCI_VENDOR_ID_SUNIX 0x1fd4 #define PCI_DEVICE_ID_SUNIX_1999 0x1999 @@ -2078,48 +1919,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = kt_serial_setup, }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_BYT_UART1, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = byt_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_BYT_UART2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = byt_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_BSW_UART1, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = byt_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_BSW_UART2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = byt_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_BDW_UART1, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = byt_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_BDW_UART2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = byt_serial_setup, - }, /* * ITE */ @@ -2992,8 +2791,6 @@ enum pci_board_num_t { pbn_ADDIDATA_PCIe_4_3906250, pbn_ADDIDATA_PCIe_8_3906250, pbn_ce4100_1_115200, - pbn_byt, - pbn_qrk, pbn_omegapci, pbn_NETMOS9900_2s_115200, pbn_brcm_trumanage, @@ -3769,18 +3566,6 @@ static struct pciserial_board pci_boards[] = { .base_baud = 921600, .reg_shift = 2, }, - [pbn_byt] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 2764800, - .reg_shift = 2, - }, - [pbn_qrk] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 2764800, - .reg_shift = 2, - }, [pbn_omegapci] = { .flags = FL_BASE0, .num_ports = 8, @@ -3892,6 +3677,15 @@ static const struct pci_device_id blacklist[] = { { PCI_VDEVICE(INTEL, 0x081d), }, { PCI_VDEVICE(INTEL, 0x1191), }, { PCI_VDEVICE(INTEL, 0x19d8), }, + + /* Intel platforms with DesignWare UART */ + { PCI_VDEVICE(INTEL, 0x0936), }, + { PCI_VDEVICE(INTEL, 0x0f0a), }, + { PCI_VDEVICE(INTEL, 0x0f0c), }, + { PCI_VDEVICE(INTEL, 0x228a), }, + { PCI_VDEVICE(INTEL, 0x228c), }, + { PCI_VDEVICE(INTEL, 0x9ce3), }, + { PCI_VDEVICE(INTEL, 0x9ce4), }, }; /* @@ -5659,41 +5453,8 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_ce4100_1_115200 }, - /* Intel BayTrail */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART1, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, - pbn_byt }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART2, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, - pbn_byt }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART1, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, - pbn_byt }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART2, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, - pbn_byt }, - - /* Intel Broadwell */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, - pbn_byt }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, - pbn_byt }, /* - * Intel Quark x1000 - */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_qrk }, - /* * Cronyx Omega PCI */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, |