diff options
Diffstat (limited to 'drivers/thermal/samsung/exynos_tmu.h')
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu.h | 89 |
1 files changed, 9 insertions, 80 deletions
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 1b4a644..c58c766 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -34,11 +34,6 @@ enum calibration_type { TYPE_NONE, }; -enum calibration_mode { - SW_MODE, - HW_MODE, -}; - enum soc_type { SOC_ARCH_EXYNOS3250 = 1, SOC_ARCH_EXYNOS4210, @@ -82,46 +77,19 @@ enum soc_type { * bitfields. The register validity, offsets and bitfield values may vary * slightly across different exynos SOC's. * @triminfo_data: register containing 2 pont trimming data - * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg. - * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg. * @triminfo_ctrl: trim info controller register. - * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl - reg. + * @triminfo_ctrl_count: the number of trim info controller register. * @tmu_ctrl: TMU main controller register. * @test_mux_addr_shift: shift bits of test mux address. - * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register. - * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register. * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register. - * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl - register. - * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register. - * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl - register. - * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl - register. - * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in - tmu_ctrl register. - * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register. * @tmu_status: register drescribing the TMU status. * @tmu_cur_temp: register containing the current temperature of the TMU. - * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp - register. * @threshold_temp: register containing the base threshold level. * @threshold_th0: Register containing first set of rising levels. - * @threshold_th0_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th0_l1_shift: shift bits of level1 threshold temperature. - * @threshold_th0_l2_shift: shift bits of level2 threshold temperature. - * @threshold_th0_l3_shift: shift bits of level3 threshold temperature. * @threshold_th1: Register containing second set of rising levels. - * @threshold_th1_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th1_l1_shift: shift bits of level1 threshold temperature. - * @threshold_th1_l2_shift: shift bits of level2 threshold temperature. - * @threshold_th1_l3_shift: shift bits of level3 threshold temperature. * @threshold_th2: Register containing third set of rising levels. - * @threshold_th2_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th3: Register containing fourth set of rising levels. * @threshold_th3_l0_shift: shift bits of level0 threshold temperature. * @tmu_inten: register containing the different threshold interrupt enable bits. @@ -130,68 +98,35 @@ enum soc_type { * @inten_rise2_shift: shift bits of rising 2 interrupt bits. * @inten_rise3_shift: shift bits of rising 3 interrupt bits. * @inten_fall0_shift: shift bits of falling 0 interrupt bits. - * @inten_fall1_shift: shift bits of falling 1 interrupt bits. - * @inten_fall2_shift: shift bits of falling 2 interrupt bits. - * @inten_fall3_shift: shift bits of falling 3 interrupt bits. * @tmu_intstat: Register containing the interrupt status values. * @tmu_intclear: Register for clearing the raised interrupt status. - * @intclr_fall_shift: shift bits for interrupt clear fall 0 - * @intclr_rise_shift: shift bits of all rising interrupt bits. - * @intclr_rise_mask: mask bits of all rising interrupt bits. - * @intclr_fall_mask: mask bits of all rising interrupt bits. * @emul_con: TMU emulation controller register. * @emul_temp_shift: shift bits of emulation temperature. * @emul_time_shift: shift bits of emulation time. - * @emul_time_mask: mask bits of emulation time. * @tmu_irqstatus: register to find which TMU generated interrupts. * @tmu_pmin: register to get/set the Pmin value. */ struct exynos_tmu_registers { u32 triminfo_data; - u32 triminfo_25_shift; - u32 triminfo_85_shift; - u32 triminfo_ctrl; - u32 triminfo_ctrl1; - u32 triminfo_reload_shift; + u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG]; + u32 triminfo_ctrl_count; u32 tmu_ctrl; u32 test_mux_addr_shift; - u32 buf_vref_sel_shift; - u32 buf_vref_sel_mask; u32 therm_trip_mode_shift; u32 therm_trip_mode_mask; u32 therm_trip_en_shift; - u32 buf_slope_sel_shift; - u32 buf_slope_sel_mask; - u32 calib_mode_shift; - u32 calib_mode_mask; - u32 therm_trip_tq_en_shift; - u32 core_en_shift; u32 tmu_status; u32 tmu_cur_temp; - u32 tmu_cur_temp_shift; u32 threshold_temp; u32 threshold_th0; - u32 threshold_th0_l0_shift; - u32 threshold_th0_l1_shift; - u32 threshold_th0_l2_shift; - u32 threshold_th0_l3_shift; - u32 threshold_th1; - u32 threshold_th1_l0_shift; - u32 threshold_th1_l1_shift; - u32 threshold_th1_l2_shift; - u32 threshold_th1_l3_shift; - u32 threshold_th2; - u32 threshold_th2_l0_shift; - - u32 threshold_th3; u32 threshold_th3_l0_shift; u32 tmu_inten; @@ -200,22 +135,14 @@ struct exynos_tmu_registers { u32 inten_rise2_shift; u32 inten_rise3_shift; u32 inten_fall0_shift; - u32 inten_fall1_shift; - u32 inten_fall2_shift; - u32 inten_fall3_shift; u32 tmu_intstat; u32 tmu_intclear; - u32 intclr_fall_shift; - u32 intclr_rise_shift; - u32 intclr_fall_mask; - u32 intclr_rise_mask; u32 emul_con; u32 emul_temp_shift; u32 emul_time_shift; - u32 emul_time_mask; u32 tmu_irqstatus; u32 tmu_pmin; @@ -250,11 +177,12 @@ struct exynos_tmu_registers { * 1 = enable trigger_level[] interrupt, * 0 = disable trigger_level[] interrupt * @max_trigger_level: max trigger level supported by the TMU + * @non_hw_trigger_levels: number of defined non-hardware trigger levels * @gain: gain of amplifier in the positive-TC generator block - * 0 <= gain <= 15 + * 0 < gain <= 15 * @reference_voltage: reference voltage of amplifier * in the positive-TC generator block - * 0 <= reference_voltage <= 31 + * 0 < reference_voltage <= 31 * @noise_cancel_mode: noise cancellation mode * 000, 100, 101, 110 and 111 can be different modes * @type: determines the type of SOC @@ -265,8 +193,8 @@ struct exynos_tmu_registers { * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming * @test_mux; information if SoC supports test MUX + * @triminfo_reload: reload value to read TRIMINFO register * @cal_type: calibration type for temperature - * @cal_mode: calibration mode for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may * applicable to only some of the trigger levels. @@ -284,6 +212,7 @@ struct exynos_tmu_platform_data { enum trigger_type trigger_type[MAX_TRIP_COUNT]; bool trigger_enable[MAX_TRIP_COUNT]; u8 max_trigger_level; + u8 non_hw_trigger_levels; u8 gain; u8 reference_voltage; u8 noise_cancel_mode; @@ -295,9 +224,9 @@ struct exynos_tmu_platform_data { u8 second_point_trim; u8 default_temp_offset; u8 test_mux; + u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG]; enum calibration_type cal_type; - enum calibration_mode cal_mode; enum soc_type type; struct freq_clip_table freq_tab[4]; unsigned int freq_tab_count; |
