summaryrefslogtreecommitdiffstats
path: root/drivers/thermal/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal/Kconfig')
-rw-r--r--drivers/thermal/Kconfig32
1 files changed, 32 insertions, 0 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 6871ecc..b5b5fac 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -15,6 +15,23 @@ menuconfig THERMAL
if THERMAL
+config THERMAL_EMERGENCY_POWEROFF_DELAY_MS
+ int "Emergency poweroff delay in milli-seconds"
+ depends on THERMAL
+ default 0
+ help
+ Thermal subsystem will issue a graceful shutdown when
+ critical temperatures are reached using orderly_poweroff(). In
+ case of failure of an orderly_poweroff(), the thermal emergency
+ poweroff kicks in after a delay has elapsed and shuts down the system.
+ This config is number of milliseconds to delay before emergency
+ poweroff kicks in. Similarly to the critical trip point,
+ the delay should be carefully profiled so as to give adequate
+ time for orderly_poweroff() to finish on regular execution.
+ If set to 0 emergency poweroff will not be supported.
+
+ In doubt, leave as 0.
+
config THERMAL_HWMON
bool
prompt "Expose thermal sensors as hwmon device"
@@ -291,6 +308,16 @@ config ARMADA_THERMAL
Enable this option if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC.
+config DA9062_THERMAL
+ tristate "DA9062/DA9061 Dialog Semiconductor thermal driver"
+ depends on MFD_DA9062 || COMPILE_TEST
+ depends on OF
+ help
+ Enable this for the Dialog Semiconductor thermal sensor driver.
+ This will report PMIC junction over-temperature for one thermal trip
+ zone.
+ Compatible with the DA9062 and DA9061 PMICs.
+
config INTEL_POWERCLAMP
tristate "Intel PowerClamp idle injection driver"
depends on THERMAL
@@ -380,6 +407,11 @@ config MTK_THERMAL
Enable this option if you want to have support for thermal management
controller present in Mediatek SoCs
+menu "Broadcom thermal drivers"
+depends on ARCH_BCM || COMPILE_TEST
+source "drivers/thermal/broadcom/Kconfig"
+endmenu
+
menu "Texas Instruments thermal drivers"
depends on ARCH_HAS_BANDGAP || COMPILE_TEST
depends on HAS_IOMEM
OpenPOWER on IntegriCloud