diff options
Diffstat (limited to 'drivers/staging/winbond/mds_s.h')
-rw-r--r-- | drivers/staging/winbond/mds_s.h | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h new file mode 100644 index 0000000..4738279 --- /dev/null +++ b/drivers/staging/winbond/mds_s.h @@ -0,0 +1,183 @@ +//////////////////////////////////////////////////////////////////////////////////////////////////////// +#define MAX_USB_TX_DESCRIPTOR 15 // IS89C35 ability +#define MAX_USB_TX_BUFFER_NUMBER 4 // Virtual pre-buffer number of MAX_USB_TX_BUFFER +#define MAX_USB_TX_BUFFER 4096 // IS89C35 ability 4n alignment is required for hardware + +#define MDS_EVENT_INDICATE( _A, _B, _F ) OS_EVENT_INDICATE( _A, _B, _F ) +#define AUTH_REQUEST_PAIRWISE_ERROR 0 // _F flag setting +#define AUTH_REQUEST_GROUP_ERROR 1 // _F flag setting + +// For variable setting +#define CURRENT_BSS_TYPE psBSS(psLOCAL->wConnectedSTAindex)->bBssType +#define CURRENT_WEP_MODE psSME->_dot11PrivacyInvoked +#define CURRENT_BSSID psBSS(psLOCAL->wConnectedSTAindex)->abBssID +#define CURRENT_DESIRED_WPA_ENABLE ((psSME->bDesiredAuthMode==WPA_AUTH)||(psSME->bDesiredAuthMode==WPAPSK_AUTH)) +#ifdef _WPA2_ +#define CURRENT_DESIRED_WPA2_ENABLE ((psSME->bDesiredAuthMode==WPA2_AUTH)||(psSME->bDesiredAuthMode==WPA2PSK_AUTH)) +#endif //end def _WPA2_ +#define CURRENT_PAIRWISE_KEY_OK psSME->pairwise_key_ok +//[20040712 WS] +#define CURRENT_GROUP_KEY_OK psSME->group_key_ok +#define CURRENT_PAIRWISE_KEY psSME->tx_mic_key +#define CURRENT_GROUP_KEY psSME->group_tx_mic_key +#define CURRENT_ENCRYPT_STATUS psSME->encrypt_status +#define CURRENT_WEP_ID Adapter->sSmePara._dot11WEPDefaultKeyID +#define CURRENT_CONTROL_PORT_BLOCK ( psSME->wpa_ok!=1 || (Adapter->Mds.boCounterMeasureBlock==1 && (CURRENT_ENCRYPT_STATUS==ENCRYPT_TKIP)) ) +#define CURRENT_FRAGMENT_THRESHOLD (Adapter->Mds.TxFragmentThreshold & ~0x1) +#define CURRENT_PREAMBLE_MODE psLOCAL->boShortPreamble?WLAN_PREAMBLE_TYPE_SHORT:WLAN_PREAMBLE_TYPE_LONG +#define CURRENT_LINK_ON OS_LINK_STATUS +#define CURRENT_TX_RATE Adapter->sLocalPara.CurrentTxRate +#define CURRENT_FALL_BACK_TX_RATE Adapter->sLocalPara.CurrentTxFallbackRate +#define CURRENT_TX_RATE_FOR_MNG Adapter->sLocalPara.CurrentTxRateForMng +#define CURRENT_PROTECT_MECHANISM psLOCAL->boProtectMechanism +#define CURRENT_RTS_THRESHOLD Adapter->Mds.TxRTSThreshold + +#define MIB_GS_XMIT_OK_INC Adapter->sLocalPara.GS_XMIT_OK++ +#define MIB_GS_RCV_OK_INC Adapter->sLocalPara.GS_RCV_OK++ +#define MIB_GS_XMIT_ERROR_INC Adapter->sLocalPara.GS_XMIT_ERROR + +//---------- TX ----------------------------------- +#define ETHERNET_TX_DESCRIPTORS MAX_USB_TX_BUFFER_NUMBER + +//---------- RX ------------------------------------ +#define ETHERNET_RX_DESCRIPTORS 8 //It's not necessary to allocate more than 2 in sync indicate + +//================================================================ +// Configration default value +//================================================================ +#define DEFAULT_MULTICASTLISTMAX 32 // standard +#define DEFAULT_TX_BURSTLENGTH 3 // 32 Longwords +#define DEFAULT_RX_BURSTLENGTH 3 // 32 Longwords +#define DEFAULT_TX_THRESHOLD 0 // Full Packet +#define DEFAULT_RX_THRESHOLD 0 // Full Packet +#define DEFAULT_MAXTXRATE 6 // 11 Mbps (Long) +#define DEFAULT_CHANNEL 3 // Chennel 3 +#define DEFAULT_RTSThreshold 2347 // Disable RTS +//#define DEFAULT_PME 1 // Enable +#define DEFAULT_PME 0 // Disable +#define DEFAULT_SIFSTIME 10 +#define DEFAULT_ACKTIME_1ML 304 // 148+44+112 911220 by LCC +#define DEFAULT_ACKTIME_2ML 248 // 148+44+56 911220 by LCC +#define DEFAULT_FRAGMENT_THRESHOLD 2346 // No fragment +#define DEFAULT_PREAMBLE_LENGTH 72 +#define DEFAULT_PLCPHEADERTIME_LENGTH 24 + +/*------------------------------------------------------------------------ + 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns + instead of 960 ns. This shall be fixed in the future W89C32 + -------------------------------------------------------------------------*/ +#define DEFAULT_MAX_RECEIVE_TIME 16440000 + +#define RX_BUF_SIZE 2352 // 600 // For 301 must be multiple of 8 +#define MAX_RX_DESCRIPTORS 18 // Rx Layer 2 +#define MAX_BUFFER_QUEUE 8 // The value is always equal 8 due to NDIS_PACKET's MiniportReserved field size + + +// For brand-new rx system +#define MDS_ID_IGNORE ETHERNET_RX_DESCRIPTORS + +// For Tx Packet status classify +#define PACKET_FREE_TO_USE 0 +#define PACKET_COME_FROM_NDIS 0x08 +#define PACKET_COME_FROM_MLME 0x80 +#define PACKET_SEND_COMPLETE 0xff + +typedef struct _MDS +{ + // For Tx usage + u8 TxOwner[ ((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03) ]; + PUCHAR pTxBuffer; + u16 TxBufferSize[ ((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01) ]; + u8 TxDesFrom[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ];//931130.4.u // 1: MLME 2: NDIS control 3: NDIS data + u8 TxCountInBuffer[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ]; // 20060928 + + u8 TxFillIndex;//the next index of TxBuffer can be used + u8 TxDesIndex;//The next index of TxDes can be used + u8 ScanTxPause; //data Tx pause because the scanning is progressing, but probe request Tx won't. + u8 TxPause;//For pause the Mds_Tx modult + + OS_ATOMIC TxThreadCount;//For thread counting 931130.4.v +//950301 delete due to HW +// OS_ATOMIC TxConcurrentCount;//931130.4.w + + u16 TxResult[ ((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01) ];//Collect the sending result of Mpdu + + u8 MicRedundant[8]; // For tmp use + PUCHAR MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment + + u16 MicWriteSize[2]; //931130.4.x + + u16 MicAdd; // If want to add the Mic, this variable equal to 8 + u16 MicWriteIndex;//The number of MicWriteAddress 931130.4.y + + u8 TxRate[ ((MAX_USB_TX_DESCRIPTOR+1)&~0x01) ][2]; // [0] current tx rate, [1] fall back rate + u8 TxInfo[ ((MAX_USB_TX_DESCRIPTOR+1)&~0x01) ]; //Store information for callback function + + //WKCHEN added for scanning mechanism + u8 TxToggle; //It is TRUE if there are tx activities in some time interval + u8 Reserved_[3]; + + //---------- for Tx Parameter + u16 TxFragmentThreshold; // For frame body only + u16 TxRTSThreshold; + + u32 MaxReceiveTime;//911220.3 Add + + // depend on OS, + u32 MulticastListNo; + u32 PacketFilter; // Setting by NDIS, the current packet filter in use. + u8 MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH]; + + //COUNTERMEASURE + u8 bMICfailCount; + u8 boCounterMeasureBlock; + u8 reserved_4[2]; + + //NDIS_MINIPORT_TIMER nTimer; + OS_TIMER nTimer; + + u32 TxTsc; // 20060214 + u32 TxTsc_2; // 20060214 + +} MDS, *PMDS; + + +typedef struct _RxBuffer +{ + PUCHAR pBufferAddress; // Pointer the received data buffer. + u16 BufferSize; + u8 RESERVED; + u8 BufferIndex;// Only 1 byte +} RXBUFFER, *PRXBUFFER; + +// +// Reveive Layer 1 Format. +//---------------------------- +typedef struct _RXLAYER1 +{ + u16 SequenceNumber; // The sequence number of the last received packet. + u16 BufferTotalSize; + + u32 InUsed; + u32 DecryptionMethod; // The desired defragment number of the next incoming packet. + + u8 DeFragmentNumber; + u8 FrameType; + u8 TypeEncapsulated; + u8 BufferNumber; + + u32 FirstFrameArrivedTime; + + RXBUFFER BufferQueue[ MAX_BUFFER_QUEUE ]; + + u8 LastFrameType; // 20061004 for fix intel 3945 's bug + u8 RESERVED[3]; //@@ anson + + ///////////////////////////////////////////////////////////////////////////////////////////// + // For brand-new Rx system + u8 ReservedBuffer[ 2400 ];//If Buffer ID is reserved one, it must copy the data into this area + PUCHAR ReservedBufferPoint;// Point to the next availabe address of reserved buffer + +}RXLAYER1, * PRXLAYER1; + + |