diff options
Diffstat (limited to 'drivers/staging/sep/sep_driver.c')
| -rw-r--r-- | drivers/staging/sep/sep_driver.c | 2742 |
1 files changed, 0 insertions, 2742 deletions
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c deleted file mode 100644 index ecbde34..0000000 --- a/drivers/staging/sep/sep_driver.c +++ /dev/null @@ -1,2742 +0,0 @@ -/* - * - * sep_driver.c - Security Processor Driver main group of functions - * - * Copyright(c) 2009 Intel Corporation. All rights reserved. - * Copyright(c) 2009 Discretix. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * CONTACTS: - * - * Mark Allyn mark.a.allyn@intel.com - * - * CHANGES: - * - * 2009.06.26 Initial publish - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/cdev.h> -#include <linux/kdev_t.h> -#include <linux/mutex.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/poll.h> -#include <linux/wait.h> -#include <linux/pci.h> -#include <linux/firmware.h> -#include <linux/slab.h> -#include <asm/ioctl.h> -#include <linux/ioport.h> -#include <asm/io.h> -#include <linux/interrupt.h> -#include <linux/pagemap.h> -#include <asm/cacheflush.h> -#include "sep_driver_hw_defs.h" -#include "sep_driver_config.h" -#include "sep_driver_api.h" -#include "sep_dev.h" - -#if SEP_DRIVER_ARM_DEBUG_MODE - -#define CRYS_SEP_ROM_length 0x4000 -#define CRYS_SEP_ROM_start_address 0x8000C000UL -#define CRYS_SEP_ROM_start_address_offset 0xC000UL -#define SEP_ROM_BANK_register 0x80008420UL -#define SEP_ROM_BANK_register_offset 0x8420UL -#define SEP_RAR_IO_MEM_REGION_START_ADDRESS 0x82000000 - -/* - * THESE 2 definitions are specific to the board - must be - * defined during integration - */ -#define SEP_RAR_IO_MEM_REGION_START_ADDRESS 0xFF0D0000 - -/* 2M size */ - -static void sep_load_rom_code(struct sep_device *sep) -{ - /* Index variables */ - unsigned long i, k, j; - u32 reg; - u32 error; - u32 warning; - - /* Loading ROM from SEP_ROM_image.h file */ - k = sizeof(CRYS_SEP_ROM); - - edbg("SEP Driver: DX_CC_TST_SepRomLoader start\n"); - - edbg("SEP Driver: k is %lu\n", k); - edbg("SEP Driver: sep->reg_addr is %p\n", sep->reg_addr); - edbg("SEP Driver: CRYS_SEP_ROM_start_address_offset is %p\n", CRYS_SEP_ROM_start_address_offset); - - for (i = 0; i < 4; i++) { - /* write bank */ - sep_write_reg(sep, SEP_ROM_BANK_register_offset, i); - - for (j = 0; j < CRYS_SEP_ROM_length / 4; j++) { - sep_write_reg(sep, CRYS_SEP_ROM_start_address_offset + 4 * j, CRYS_SEP_ROM[i * 0x1000 + j]); - - k = k - 4; - - if (k == 0) { - j = CRYS_SEP_ROM_length; - i = 4; - } - } - } - - /* reset the SEP */ - sep_write_reg(sep, HW_HOST_SEP_SW_RST_REG_ADDR, 0x1); - - /* poll for SEP ROM boot finish */ - do - reg = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); - while (!reg); - - edbg("SEP Driver: ROM polling ended\n"); - - switch (reg) { - case 0x1: - /* fatal error - read erro status from GPRO */ - error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); - edbg("SEP Driver: ROM polling case 1\n"); - break; - case 0x4: - /* Cold boot ended successfully */ - case 0x8: - /* Warmboot ended successfully */ - case 0x10: - /* ColdWarm boot ended successfully */ - error = 0; - case 0x2: - /* Boot First Phase ended */ - warning = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); - case 0x20: - edbg("SEP Driver: ROM polling case %d\n", reg); - break; - } - -} - -#else -static void sep_load_rom_code(struct sep_device *sep) { } -#endif /* SEP_DRIVER_ARM_DEBUG_MODE */ - - - -/*---------------------------------------- - DEFINES ------------------------------------------*/ - -#define BASE_ADDRESS_FOR_SYSTEM 0xfffc0000 -#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000 - -/*-------------------------------------------- - GLOBAL variables ---------------------------------------------*/ - -/* debug messages level */ -static int debug; -module_param(debug, int , 0); -MODULE_PARM_DESC(debug, "Flag to enable SEP debug messages"); - -/* Keep this a single static object for now to keep the conversion easy */ - -static struct sep_device sep_instance; -static struct sep_device *sep_dev = &sep_instance; - -/* - mutex for the access to the internals of the sep driver -*/ -static DEFINE_MUTEX(sep_mutex); - - -/* wait queue head (event) of the driver */ -static DECLARE_WAIT_QUEUE_HEAD(sep_event); - -/** - * sep_load_firmware - copy firmware cache/resident - * @sep: device we are loading - * - * This functions copies the cache and resident from their source - * location into destination shared memory. - */ - -static int sep_load_firmware(struct sep_device *sep) -{ - const struct firmware *fw; - char *cache_name = "sep/cache.image.bin"; - char *res_name = "sep/resident.image.bin"; - int error; - - edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr); - edbg("SEP Driver:rar_bus is %08llx\n", (unsigned long long)sep->rar_bus); - - /* load cache */ - error = request_firmware(&fw, cache_name, &sep->pdev->dev); - if (error) { - edbg("SEP Driver:cant request cache fw\n"); - return error; - } - edbg("SEP Driver:cache %08Zx@%p\n", fw->size, (void *) fw->data); - - memcpy(sep->rar_addr, (void *)fw->data, fw->size); - sep->cache_size = fw->size; - release_firmware(fw); - - sep->resident_bus = sep->rar_bus + sep->cache_size; - sep->resident_addr = sep->rar_addr + sep->cache_size; - - /* load resident */ - error = request_firmware(&fw, res_name, &sep->pdev->dev); - if (error) { - edbg("SEP Driver:cant request res fw\n"); - return error; - } - edbg("sep: res %08Zx@%p\n", fw->size, (void *)fw->data); - - memcpy(sep->resident_addr, (void *) fw->data, fw->size); - sep->resident_size = fw->size; - release_firmware(fw); - - edbg("sep: resident v %p b %08llx cache v %p b %08llx\n", - sep->resident_addr, (unsigned long long)sep->resident_bus, - sep->rar_addr, (unsigned long long)sep->rar_bus); - return 0; -} - -MODULE_FIRMWARE("sep/cache.image.bin"); -MODULE_FIRMWARE("sep/resident.image.bin"); - -/** - * sep_map_and_alloc_shared_area - allocate shared block - * @sep: security processor - * @size: size of shared area - * - * Allocate a shared buffer in host memory that can be used by both the - * kernel and also the hardware interface via DMA. - */ - -static int sep_map_and_alloc_shared_area(struct sep_device *sep, - unsigned long size) -{ - /* shared_addr = ioremap_nocache(0xda00000,shared_area_size); */ - sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev, size, - &sep->shared_bus, GFP_KERNEL); - - if (!sep->shared_addr) { - edbg("sep_driver :shared memory dma_alloc_coherent failed\n"); - return -ENOMEM; - } - /* set the bus address of the shared area */ - edbg("sep: shared_addr %ld bytes @%p (bus %08llx)\n", - size, sep->shared_addr, (unsigned long long)sep->shared_bus); - return 0; -} - -/** - * sep_unmap_and_free_shared_area - free shared block - * @sep: security processor - * - * Free the shared area allocated to the security processor. The - * processor must have finished with this and any final posted - * writes cleared before we do so. - */ -static void sep_unmap_and_free_shared_area(struct sep_device *sep, int size) -{ - dma_free_coherent(&sep->pdev->dev, size, - sep->shared_addr, sep->shared_bus); -} - -/** - * sep_shared_virt_to_bus - convert bus/virt addresses - * - * Returns the bus address inside the shared area according - * to the virtual address. - */ - -static dma_addr_t sep_shared_virt_to_bus(struct sep_device *sep, - void *virt_address) -{ - dma_addr_t pa = sep->shared_bus + (virt_address - sep->shared_addr); - edbg("sep: virt to bus b %08llx v %p\n", (unsigned long long) pa, - virt_address); - return pa; -} - -/** - * sep_shared_bus_to_virt - convert bus/virt addresses - * - * Returns virtual address inside the shared area according - * to the bus address. - */ - -static void *sep_shared_bus_to_virt(struct sep_device *sep, - dma_addr_t bus_address) -{ - return sep->shared_addr + (bus_address - sep->shared_bus); -} - - -/** - * sep_try_open - attempt to open a SEP device - * @sep: device to attempt to open - * - * Atomically attempt to get ownership of a SEP device. - * Returns 1 if the device was opened, 0 on failure. - */ - -static int sep_try_open(struct sep_device *sep) -{ - if (!test_and_set_bit(0, &sep->in_use)) - return 1; - return 0; -} - -/** - * sep_open - device open method - * @inode: inode of sep device - * @filp: file handle to sep device - * - * Open method for the SEP device. Called when userspace opens - * the SEP device node. Must also release the memory data pool - * allocations. - * - * Returns zero on success otherwise an error code. - */ - -static int sep_open(struct inode *inode, struct file *filp) -{ - if (sep_dev == NULL) - return -ENODEV; - - /* check the blocking mode */ - if (filp->f_flags & O_NDELAY) { - if (sep_try_open(sep_dev) == 0) - return -EAGAIN; - } else - if (wait_event_interruptible(sep_event, sep_try_open(sep_dev)) < 0) - return -EINTR; - - /* Bind to the device, we only have one which makes it easy */ - filp->private_data = sep_dev; - /* release data pool allocations */ - sep_dev->data_pool_bytes_allocated = 0; - return 0; -} - - -/** - * sep_release - close a SEP device - * @inode: inode of SEP device - * @filp: file handle being closed - * - * Called on the final close of a SEP device. As the open protects against - * multiple simultaenous opens that means this method is called when the - * final reference to the open handle is dropped. - */ - -static int sep_release(struct inode *inode, struct file *filp) -{ - struct sep_device *sep = filp->private_data; -#if 0 /*!SEP_DRIVER_POLLING_MODE */ - /* close IMR */ - sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, 0x7FFF); - /* release IRQ line */ - free_irq(SEP_DIRVER_IRQ_NUM, sep); - -#endif - /* Ensure any blocked open progresses */ - clear_bit(0, &sep->in_use); - wake_up(&sep_event); - return 0; -} - -/*--------------------------------------------------------------- - map function - this functions maps the message shared area ------------------------------------------------------------------*/ -static int sep_mmap(struct file *filp, struct vm_area_struct *vma) -{ - dma_addr_t bus_addr; - struct sep_device *sep = filp->private_data; - - dbg("-------->SEP Driver: mmap start\n"); - - /* check that the size of the mapped range is as the size of the message - shared area */ - if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) { - edbg("SEP Driver mmap requested size is more than allowed\n"); - printk(KERN_WARNING "SEP Driver mmap requested size is more than allowed\n"); - printk(KERN_WARNING "SEP Driver vma->vm_end is %08lx\n", vma->vm_end); - printk(KERN_WARNING "SEP Driver vma->vm_end is %08lx\n", vma->vm_start); - return -EAGAIN; - } - - edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr); - - /* get bus address */ - bus_addr = sep->shared_bus; - - edbg("SEP Driver: phys_addr is %08llx\n", (unsigned long long)bus_addr); - - if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) { - edbg("SEP Driver remap_page_range failed\n"); - printk(KERN_WARNING "SEP Driver remap_page_range failed\n"); - return -EAGAIN; - } - - dbg("SEP Driver:<-------- mmap end\n"); - - return 0; -} - - -/*----------------------------------------------- - poll function -*----------------------------------------------*/ -static unsigned int sep_poll(struct file *filp, poll_table * wait) -{ - unsigned long count; - unsigned int mask = 0; - unsigned long retval = 0; /* flow id */ - struct sep_device *sep = filp->private_data; - - dbg("---------->SEP Driver poll: start\n"); - - -#if SEP_DRIVER_POLLING_MODE - - while (sep->send_ct != (retval & 0x7FFFFFFF)) { - retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); - - for (count = 0; count < 10 * 4; count += 4) - edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count))); - } - - sep->reply_ct++; -#else - /* add the event to the polling wait table */ - poll_wait(filp, &sep_event, wait); - -#endif - - edbg("sep->send_ct is %lu\n", sep->send_ct); - edbg("sep->reply_ct is %lu\n", sep->reply_ct); - - /* check if the data is ready */ - if (sep->send_ct == sep->reply_ct) { - for (count = 0; count < 12 * 4; count += 4) - edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count))); - - for (count = 0; count < 10 * 4; count += 4) - edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + 0x1800 + count))); - - retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); - edbg("retval is %lu\n", retval); - /* check if the this is sep reply or request */ - if (retval >> 31) { - edbg("SEP Driver: sep request in\n"); - /* request */ - mask |= POLLOUT | POLLWRNORM; - } else { - edbg("SEP Driver: sep reply in\n"); - mask |= POLLIN | POLLRDNORM; - } - } - dbg("SEP Driver:<-------- poll exit\n"); - return mask; -} - -/** - * sep_time_address - address in SEP memory of time - * @sep: SEP device we want the address from - * - * Return the address of the two dwords in memory used for time - * setting. - */ - -static u32 *sep_time_address(struct sep_device *sep) -{ - return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES; -} - -/** - * sep_set_time - set the SEP time - * @sep: the SEP we are setting the time for - * - * Calculates time and sets it at the predefined address. - * Called with the sep mutex held. - */ -static unsigned long sep_set_time(struct sep_device *sep) -{ - struct timeval time; - u32 *time_addr; /* address of time as seen by the kernel */ - - - dbg("sep:sep_set_time start\n"); - - do_gettimeofday(&time); - - /* set value in the SYSTEM MEMORY offset */ - time_addr = sep_time_address(sep); - - time_addr[0] = SEP_TIME_VAL_TOKEN; - time_addr[1] = time.tv_sec; - - edbg("SEP Driver:time.tv_sec is %lu\n", time.tv_sec); - edbg("SEP Driver:time_addr is %p\n", time_addr); - edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr); - - return time.tv_sec; -} - -/** - * sep_dump_message - dump the message that is pending - * @sep: sep device - * - * Dump out the message pending in the shared message area - */ - -static void sep_dump_message(struct sep_device *sep) -{ - int count; - for (count = 0; count < 12 * 4; count += 4) - edbg("Word %d of the message is %u\n", count, *((u32 *) (sep->shared_addr + count))); -} - -/** - * sep_send_command_handler - kick off a command - * @sep: sep being signalled - * - * This function raises interrupt to SEP that signals that is has a new - * command from the host - */ - -static void sep_send_command_handler(struct sep_device *sep) -{ - dbg("sep:sep_send_command_handler start\n"); - - mutex_lock(&sep_mutex); - sep_set_time(sep); - - /* FIXME: flush cache */ - flush_cache_all(); - - sep_dump_message(sep); - /* update counter */ - sep->send_ct++; - /* send interrupt to SEP */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); - dbg("SEP Driver:<-------- sep_send_command_handler end\n"); - mutex_unlock(&sep_mutex); - return; -} - -/** - * sep_send_reply_command_handler - kick off a command reply - * @sep: sep being signalled - * - * This function raises interrupt to SEP that signals that is has a new - * command from the host - */ - -static void sep_send_reply_command_handler(struct sep_device *sep) -{ - dbg("sep:sep_send_reply_command_handler start\n"); - - /* flash cache */ - flush_cache_all(); - - sep_dump_message(sep); - - mutex_lock(&sep_mutex); - sep->send_ct++; /* update counter */ - /* send the interrupt to SEP */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct); - /* update both counters */ - sep->send_ct++; - sep->reply_ct++; - mutex_unlock(&sep_mutex); - dbg("sep: sep_send_reply_command_handler end\n"); -} - -/* - This function handles the allocate data pool memory request - This function returns calculates the bus address of the - allocated memory, and the offset of this area from the mapped address. - Therefore, the FVOs in user space can calculate the exact virtual - address of this allocated memory -*/ -static int sep_allocate_data_pool_memory_handler(struct sep_device *sep, - unsigned long arg) -{ - int error; - struct sep_driver_alloc_t command_args; - - dbg("SEP Driver:--------> sep_allocate_data_pool_memory_handler start\n"); - - error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_alloc_t)); - if (error) { - error = -EFAULT; - goto end_function; - } - - /* allocate memory */ - if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) { - error = -ENOMEM; - goto end_function; - } - - /* set the virtual and bus address */ - command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated; - command_args.phys_address = sep->shared_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated; - - /* write the memory back to the user space */ - error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t)); - if (error) { - error = -EFAULT; - goto end_function; - } - - /* set the allocation */ - sep->data_pool_bytes_allocated += command_args.num_bytes; - -end_function: - dbg("SEP Driver:<-------- sep_allocate_data_pool_memory_handler end\n"); - return error; -} - -/* - This function handles write into allocated data pool command -*/ -static int sep_write_into_data_pool_handler(struct sep_device *sep, unsigned long arg) -{ - int error; - void *virt_address; - unsigned long va; - unsigned long app_in_address; - unsigned long num_bytes; - void *data_pool_area_addr; - - dbg("SEP Driver:--------> sep_write_into_data_pool_handler start\n"); - - /* get the application address */ - error = get_user(app_in_address, &(((struct sep_driver_write_t *) arg)->app_address)); - if (error) - goto end_function; - - /* get the virtual kernel address address */ - error = get_user(va, &(((struct sep_driver_write_t *) arg)->datapool_address)); - if (error) - goto end_function; - virt_address = (void *)va; - - /* get the number of bytes */ - error = get_user(num_bytes, &(((struct sep_driver_write_t *) arg)->num_bytes)); - if (error) - goto end_function; - - /* calculate the start of the data pool */ - data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES; - - - /* check that the range of the virtual kernel address is correct */ - if (virt_address < data_pool_area_addr || virt_address > (data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES)) { - error = -EINVAL; - goto end_function; - } - /* copy the application data */ - error = copy_from_user(virt_address, (void *) app_in_address, num_bytes); - if (error) - error = -EFAULT; -end_function: - dbg("SEP Driver:<-------- sep_write_into_data_pool_handler end\n"); - return error; -} - -/* - this function handles the read from data pool command -*/ -static int sep_read_from_data_pool_handler(struct sep_device *sep, unsigned long arg) -{ - int error; - /* virtual address of dest application buffer */ - unsigned long app_out_address; - /* virtual address of the data pool */ - unsigned long va; - void *virt_address; - unsigned long num_bytes; - void *data_pool_area_addr; - - dbg("SEP Driver:--------> sep_read_from_data_pool_handler start\n"); - - /* get the application address */ - error = get_user(app_out_address, &(((struct sep_driver_write_t *) arg)->app_address)); - if (error) - goto end_function; - - /* get the virtual kernel address address */ - error = get_user(va, &(((struct sep_driver_write_t *) arg)->datapool_address)); - if (error) - goto end_function; - virt_address = (void *)va; - - /* get the number of bytes */ - error = get_user(num_bytes, &(((struct sep_driver_write_t *) arg)->num_bytes)); - if (error) - goto end_function; - - /* calculate the start of the data pool */ - data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES; - - /* FIXME: These are incomplete all over the driver: what about + len - and when doing that also overflows */ - /* check that the range of the virtual kernel address is correct */ - if (virt_address < data_pool_area_addr || virt_address > data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) { - error = -EINVAL; - goto end_function; - } - - /* copy the application data */ - error = copy_to_user((void *) app_out_address, virt_address, num_bytes); - if (error) - error = -EFAULT; -end_function: - dbg("SEP Driver:<-------- sep_read_from_data_pool_handler end\n"); - return error; -} - -/* - This function releases all the application virtual buffer physical pages, - that were previously locked -*/ -static int sep_free_dma_pages(struct page **page_array_ptr, unsigned long num_pages, unsigned long dirtyFlag) -{ - unsigned long count; - - if (dirtyFlag) { - for (count = 0; count < num_pages; count++) { - /* the out array was written, therefore the data was changed */ - if (!PageReserved(page_array_ptr[count])) - SetPageDirty(page_array_ptr[count]); - page_cache_release(page_array_ptr[count]); - } - } else { - /* free in pages - the data was only read, therefore no update was done - on those pages */ - for (count = 0; count < num_pages; count++) - page_cache_release(page_array_ptr[count]); - } - - if (page_array_ptr) - /* free the array */ - kfree(page_array_ptr); - - return 0; -} - -/* - This function locks all the physical pages of the kernel virtual buffer - and construct a basic lli array, where each entry holds the physical - page address and the size that application data holds in this physical pages -*/ -static int sep_lock_kernel_pages(struct sep_device *sep, - unsigned long kernel_virt_addr, - unsigned long data_size, - unsigned long *num_pages_ptr, - struct sep_lli_entry_t **lli_array_ptr, - struct page ***page_array_ptr) -{ - int error = 0; - /* the the page of the end address of the user space buffer */ - unsigned long end_page; - /* the page of the start address of the user space buffer */ - unsigned long start_page; - /* the range in pages */ - unsigned long num_pages; - struct sep_lli_entry_t *lli_array; - /* next kernel address to map */ - unsigned long next_kernel_address; - unsigned long count; - - dbg("SEP Driver:--------> sep_lock_kernel_pages start\n"); - - /* set start and end pages and num pages */ - end_page = (kernel_virt_addr + data_size - 1) >> PAGE_SHIFT; - start_page = kernel_virt_addr >> PAGE_SHIFT; - num_pages = end_page - start_page + 1; - - edbg("SEP Driver: kernel_virt_addr is %08lx\n", kernel_virt_addr); - edbg("SEP Driver: data_size is %lu\n", data_size); - edbg("SEP Driver: start_page is %lx\n", start_page); - edbg("SEP Driver: end_page is %lx\n", end_page); - edbg("SEP Driver: num_pages is %lu\n", num_pages); - - lli_array = kmalloc(sizeof(struct sep_lli_entry_t) * num_pages, GFP_ATOMIC); - if (!lli_array) { - edbg("SEP Driver: kmalloc for lli_array failed\n"); - error = -ENOMEM; - goto end_function; - } - - /* set the start address of the first page - app data may start not at - the beginning of the page */ - lli_array[0].physical_address = (unsigned long) virt_to_phys((unsigned long *) kernel_virt_addr); - - /* check that not all the data is in the first page only */ - if ((PAGE_SIZE - (kernel_virt_addr & (~PAGE_MASK))) >= data_size) - lli_array[0].block_size = data_size; - else - lli_array[0].block_size = PAGE_SIZE - (kernel_virt_addr & (~PAGE_MASK)); - - /* debug print */ - dbg("lli_array[0].physical_address is %08lx, lli_array[0].block_size is %lu\n", lli_array[0].physical_address, lli_array[0].block_size); - - /* advance the address to the start of the next page */ - next_kernel_address = (kernel_virt_addr & PAGE_MASK) + PAGE_SIZE; - - /* go from the second page to the prev before last */ - for (count = 1; count < (num_pages - 1); count++) { - lli_array[count].physical_address = (unsigned long) virt_to_phys((unsigned long *) next_kernel_address); - lli_array[count].block_size = PAGE_SIZE; - - edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", count, lli_array[count].physical_address, count, lli_array[count].block_size); - next_kernel_address += PAGE_SIZE; - } - - /* if more then 1 pages locked - then update for the last page size needed */ - if (num_pages > 1) { - /* update the address of the last page */ - lli_array[count].physical_address = (unsigned long) virt_to_phys((unsigned long *) next_kernel_address); - - /* set the size of the last page */ - lli_array[count].block_size = (kernel_virt_addr + data_size) & (~PAGE_MASK); - - if (lli_array[count].block_size == 0) { - dbg("app_virt_addr is %08lx\n", kernel_virt_addr); - dbg("data_size is %lu\n", data_size); - while (1); - } - - edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", count, lli_array[count].physical_address, count, lli_array[count].block_size); - } - /* set output params */ - *lli_array_ptr = lli_array; - *num_pages_ptr = num_pages; - *page_array_ptr = 0; -end_function: - dbg("SEP Driver:<-------- sep_lock_kernel_pages end\n"); - return 0; -} - -/* - This function locks all the physical pages of the application virtual buffer - and construct a basic lli array, where each entry holds the physical page - address and the size that application data holds in this physical pages -*/ -static int sep_lock_user_pages(struct sep_device *sep, - unsigned long app_virt_addr, - unsigned long data_size, - unsigned long *num_pages_ptr, - struct sep_lli_entry_t **lli_array_ptr, - struct page ***page_array_ptr) -{ - int error = 0; - /* the the page of the end address of the user space buffer */ - unsigned long end_page; - /* the page of the start address of the user space buffer */ - unsigned long start_page; - /* the range in pages */ - unsigned long num_pages; - struct page **page_array; - struct sep_lli_entry_t *lli_array; - unsigned long count; - int result; - - dbg("SEP Driver:--------> sep_lock_user_pages start\n"); - - /* set start and end pages and num pages */ - end_page = (app_virt_addr + data_size - 1) >> PAGE_SHIFT; - start_page = app_virt_addr >> PAGE_SHIFT; - num_pages = end_page - start_page + 1; - - edbg("SEP Driver: app_virt_addr is %08lx\n", app_virt_addr); - edbg("SEP Driver: data_size is %lu\n", data_size); - edbg("SEP Driver: start_page is %lu\n", start_page); - edbg("SEP Driver: end_page is %lu\n", end_page); - edbg("SEP Driver: num_pages is %lu\n", num_pages); - - /* allocate array of pages structure pointers */ - page_array = kmalloc(sizeof(struct page *) * num_pages, GFP_ATOMIC); - if (!page_array) { - edbg("SEP Driver: kmalloc for page_array failed\n"); - - error = -ENOMEM; - goto end_function; - } - - lli_array = kmalloc(sizeof(struct sep_lli_entry_t) * num_pages, GFP_ATOMIC); - if (!lli_array) { - edbg("SEP Driver: kmalloc for lli_array failed\n"); - - error = -ENOMEM; - goto end_function_with_error1; - } - - /* convert the application virtual address into a set of physical */ - down_read(¤t->mm->mmap_sem); - result = get_user_pages(current, current->mm, app_virt_addr, num_pages, 1, 0, page_array, 0); - up_read(¤t->mm->mmap_sem); - - /* check the number of pages locked - if not all then exit with error */ - if (result != num_pages) { - dbg("SEP Driver: not all pages locked by get_user_pages\n"); - - error = -ENOMEM; - goto end_function_with_error2; - } - - /* flush the cache */ - for (count = 0; count < num_pages; count++) - flush_dcache_page(page_array[count]); - - /* set the start address of the first page - app data may start not at - the beginning of the page */ - lli_array[0].physical_address = ((unsigned long) page_to_phys(page_array[0])) + (app_virt_addr & (~PAGE_MASK)); - - /* check that not all the data is in the first page only */ - if ((PAGE_SIZE - (app_virt_addr & (~PAGE_MASK))) >= data_size) - lli_array[0].block_size = data_size; - else - lli_array[0].block_size = PAGE_SIZE - (app_virt_addr & (~PAGE_MASK)); - - /* debug print */ - dbg("lli_array[0].physical_address is %08lx, lli_array[0].block_size is %lu\n", lli_array[0].physical_address, lli_array[0].block_size); - - /* go from the second page to the prev before last */ - for (count = 1; count < (num_pages - 1); count++) { - lli_array[count].physical_address = (unsigned long) page_to_phys(page_array[count]); - lli_array[count].block_size = PAGE_SIZE; - - edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", count, lli_array[count].physical_address, count, lli_array[count].block_size); - } - - /* if more then 1 pages locked - then update for the last page size needed */ - if (num_pages > 1) { - /* update the address of the last page */ - lli_array[count].physical_address = (unsigned long) page_to_phys(page_array[count]); - - /* set the size of the last page */ - lli_array[count].block_size = (app_virt_addr + data_size) & (~PAGE_MASK); - - if (lli_array[count].block_size == 0) { - dbg("app_virt_addr is %08lx\n", app_virt_addr); - dbg("data_size is %lu\n", data_size); - while (1); - } - edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", - count, lli_array[count].physical_address, - count, lli_array[count].block_size); - } - - /* set output params */ - *lli_array_ptr = lli_array; - *num_pages_ptr = num_pages; - *page_array_ptr = page_array; - goto end_function; - -end_function_with_error2: - /* release the cache */ - for (count = 0; count < num_pages; count++) - page_cache_release(page_array[count]); - kfree(lli_array); -end_function_with_error1: - kfree(page_array); -end_function: - dbg("SEP Driver:<-------- sep_lock_user_pages end\n"); - return 0; -} - - -/* - this function calculates the size of data that can be inserted into the lli - table from this array the condition is that either the table is full - (all etnries are entered), or there are no more entries in the lli array -*/ -static unsigned long sep_calculate_lli_table_max_size(struct sep_lli_entry_t *lli_in_array_ptr, unsigned long num_array_entries) -{ - unsigned long table_data_size = 0; - unsigned long counter; - - /* calculate the data in the out lli table if till we fill the whole - table or till the data has ended */ - for (counter = 0; (counter < (SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP - 1)) && (counter < num_array_entries); counter++) - table_data_size += lli_in_array_ptr[counter].block_size; - return table_data_size; -} - -/* - this functions builds ont lli table from the lli_array according to - the given size of data -*/ -static void sep_build_lli_table(struct sep_lli_entry_t *lli_array_ptr, struct sep_lli_entry_t *lli_table_ptr, unsigned long *num_processed_entries_ptr, unsigned long *num_table_entries_ptr, unsigned long table_data_size) -{ - unsigned long curr_table_data_size; - /* counter of lli array entry */ - unsigned long array_counter; - - dbg("SEP Driver:--------> sep_build_lli_table start\n"); - - /* init currrent table data size and lli array entry counter */ - curr_table_data_size = 0; - array_counter = 0; - *num_table_entries_ptr = 1; - - edbg("SEP Driver:table_data_size is %lu\n", table_data_size); - - /* fill the table till table size reaches the needed amount */ - while (curr_table_data_size < table_data_size) { - /* update the number of entries in table */ - (*num_table_entries_ptr)++; - - lli_table_ptr->physical_address = lli_array_ptr[array_counter].physical_address; - lli_table_ptr->block_size = lli_array_ptr[array_counter].block_size; - curr_table_data_size += lli_table_ptr->block_size; - - edbg("SEP Driver:lli_table_ptr is %08lx\n", (unsigned long) lli_table_ptr); - edbg("SEP Driver:lli_table_ptr->physical_address is %08lx\n", lli_table_ptr->physical_address); - edbg("SEP Driver:lli_table_ptr->block_size is %lu\n", lli_table_ptr->block_size); - - /* check for overflow of the table data */ - if (curr_table_data_size > table_data_size) { - edbg("SEP Driver:curr_table_data_size > table_data_size\n"); - - /* update the size of block in the table */ - lli_table_ptr->block_size -= (curr_table_data_size - table_data_size); - - /* update the physical address in the lli array */ - lli_array_ptr[array_counter].physical_address += lli_table_ptr->block_size; - - /* update the block size left in the lli array */ - lli_array_ptr[array_counter].block_size = (curr_table_data_size - table_data_size); - } else - /* advance to the next entry in the lli_array */ - array_counter++; - - edbg("SEP Driver:lli_table_ptr->physical_address is %08lx\n", lli_table_ptr->physical_address); - edbg("SEP Driver:lli_table_ptr->block_size is %lu\n", lli_table_ptr->block_size); - - /* move to the next entry in table */ - lli_table_ptr++; - } - - /* set the info entry to default */ - lli_table_ptr->physical_address = 0xffffffff; - lli_table_ptr->block_size = 0; - - edbg("SEP Driver:lli_table_ptr is %08lx\n", (unsigned long) lli_table_ptr); - edbg("SEP Driver:lli_table_ptr->physical_address is %08lx\n", lli_table_ptr->physical_address); - edbg("SEP Driver:lli_table_ptr->block_size is %lu\n", lli_table_ptr->block_size); - - /* set the output parameter */ - *num_processed_entries_ptr += array_counter; - - edbg("SEP Driver:*num_processed_entries_ptr is %lu\n", *num_processed_entries_ptr); - dbg("SEP Driver:<-------- sep_build_lli_table end\n"); - return; -} - -/* - this function goes over the list of the print created tables and - prints all the data -*/ -static void sep_debug_print_lli_tables(struct sep_device *sep, struct sep_lli_entry_t *lli_table_ptr, unsigned long num_table_entries, unsigned long table_data_size) -{ - unsigned long table_count; - unsigned long entries_count; - - dbg("SEP Driver:--------> sep_debug_print_lli_tables start\n"); - - table_count = 1; - while ((unsigned long) lli_table_ptr != 0xffffffff) { - edbg("SEP Driver: lli table %08lx, table_data_size is %lu\n", table_count, table_data_size); - edbg("SEP Driver: num_table_entries is %lu\n", num_table_entries); - - /* print entries of the table (without info entry) */ - for (entries_count = 0; entries_count < num_table_entries; entries_count++, lli_table_ptr++) { - edbg("SEP Driver:lli_table_ptr address is %08lx\n", (unsigned long) lli_table_ptr); - edbg("SEP Driver:phys address is %08lx block size is %lu\n", lli_table_ptr->physical_address, lli_table_ptr->block_size); - } - - /* point to the info entry */ - lli_table_ptr--; - - edbg("SEP Driver:phys lli_table_ptr->block_size is %lu\n", lli_table_ptr->block_size); - edbg("SEP Driver:phys lli_table_ptr->physical_address is %08lx\n", lli_table_ptr->physical_address); - - - table_data_size = lli_table_ptr->block_size & 0xffffff; - num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff; - lli_table_ptr = (struct sep_lli_entry_t *) - (lli_table_ptr->physical_address); - - edbg("SEP Driver:phys table_data_size is %lu num_table_entries is %lu lli_table_ptr is%lu\n", table_data_size, num_table_entries, (unsigned long) lli_table_ptr); - - if ((unsigned long) lli_table_ptr != 0xffffffff) - lli_table_ptr = (struct sep_lli_entry_t *) sep_shared_bus_to_virt(sep, (unsigned long) lli_table_ptr); - - table_count++; - } - dbg("SEP Driver:<-------- sep_debug_print_lli_tables end\n"); -} - - -/* - This function prepares only input DMA table for synhronic symmetric - operations (HASH) -*/ -static int sep_prepare_input_dma_table(struct sep_device *sep, - unsigned long app_virt_addr, - unsigned long data_size, - unsigned long block_size, - unsigned long *lli_table_ptr, - unsigned long *num_entries_ptr, - unsigned long *table_data_size_ptr, - bool isKernelVirtualAddress) -{ - /* pointer to the info entry of the table - the last entry */ - struct sep_lli_entry_t *info_entry_ptr; - /* array of pointers ot page */ - struct sep_lli_entry_t *lli_array_ptr; - /* points to the first entry to be processed in the lli_in_array */ - unsigned long current_entry; - /* num entries in the virtual buffer */ - unsigned long sep_lli_entries; - /* lli table pointer */ - struct sep_lli_entry_t *in_lli_table_ptr; - /* the total data in one table */ - unsigned long table_data_size; - /* number of entries in lli table */ - unsigned long num_entries_in_table; - /* next table address */ - void *lli_table_alloc_addr; - unsigned long result; - - dbg("SEP Driver:--------> sep_prepare_input_dma_table start\n"); - - edbg("SEP Driver:data_size is %lu\n", data_size); - edbg("SEP Driver:block_size is %lu\n", block_size); - - /* initialize the pages pointers */ - sep->in_page_array = 0; - sep->in_num_pages = 0; - - if (data_size == 0) { - /* special case - created 2 entries table with zero data */ - in_lli_table_ptr = (struct sep_lli_entry_t *) (sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES); - /* FIXME: Should the entry below not be for _bus */ - in_lli_table_ptr->physical_address = (unsigned long)sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES; - in_lli_table_ptr->block_size = 0; - - in_lli_table_ptr++; - in_lli_table_ptr->physical_address = 0xFFFFFFFF; - in_lli_table_ptr->block_size = 0; - - *lli_table_ptr = sep->shared_bus + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES; - *num_entries_ptr = 2; - *table_data_size_ptr = 0; - - goto end_function; - } - - /* check if the pages are in Kernel Virtual Address layout */ - if (isKernelVirtualAddress == true) - /* lock the pages of the kernel buffer and translate them to pages */ - result = sep_lock_kernel_pages(sep, app_virt_addr, data_size, &sep->in_num_pages, &lli_array_ptr, &sep->in_page_array); - else - /* lock the pages of the user buffer and translate them to pages */ - result = sep_lock_user_pages(sep, app_virt_addr, data_size, &sep->in_num_pages, &lli_array_ptr, &sep->in_page_array); - - if (result) - return result; - - edbg("SEP Driver:output sep->in_num_pages is %lu\n", sep->in_num_pages); - - current_entry = 0; - info_entry_ptr = 0; - sep_lli_entries = sep->in_num_pages; - - /* initiate to point after the message area */ - lli_table_alloc_addr = sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES; - - /* loop till all the entries in in array are not processed */ - while (current_entry < sep_lli_entries) { - /* set the new input and output tables */ - in_lli_table_ptr = (struct sep_lli_entry_t *) lli_table_alloc_addr; - - lli_table_alloc_addr += sizeof(struct sep_lli_entry_t) * SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; - - /* calculate the maximum size of data for input table */ - table_data_size = sep_calculate_lli_table_max_size(&lli_array_ptr[current_entry], (sep_lli_entries - current_entry)); - - /* now calculate the table size so that it will be module block size */ - table_data_size = (table_data_size / block_size) * block_size; - - edbg("SEP Driver:output table_data_size is %lu\n", table_data_size); - - /* construct input lli table */ - sep_build_lli_table(&lli_array_ptr[current_entry], in_lli_table_ptr, ¤t_entry, &num_entries_in_table, table_data_size); - - if (info_entry_ptr == 0) { - /* set the output parameters to physical addresses */ - *lli_table_ptr = sep_shared_virt_to_bus(sep, in_lli_table_ptr); - *num_entries_ptr = num_entries_in_table; - *table_data_size_ptr = table_data_size; - - edbg("SEP Driver:output lli_table_in_ptr is %08lx\n", *lli_table_ptr); - } else { - /* update the info entry of the previous in table */ - info_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, in_lli_table_ptr); - info_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size); - } - - /* save the pointer to the info entry of the current tables */ - info_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1; - } - - /* print input tables */ - sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *) - sep_shared_bus_to_virt(sep, *lli_table_ptr), *num_entries_ptr, *table_data_size_ptr); - - /* the array of the pages */ - kfree(lli_array_ptr); -end_function: - dbg("SEP Driver:<-------- sep_prepare_input_dma_table end\n"); - return 0; - -} - -/* - This function creates the input and output dma tables for - symmetric operations (AES/DES) according to the block size from LLI arays -*/ -static int sep_construct_dma_tables_from_lli(struct sep_device *sep, - struct sep_lli_entry_t *lli_in_array, - unsigned long sep_in_lli_entries, - struct sep_lli_entry_t *lli_out_array, - unsigned long sep_out_lli_entries, - unsigned long block_size, unsigned long *lli_table_in_ptr, unsigned long *lli_table_out_ptr, unsigned long *in_num_entries_ptr, unsigned long *out_num_entries_ptr, unsigned long *table_data_size_ptr) -{ - /* points to the area where next lli table can be allocated: keep void * - as there is pointer scaling to fix otherwise */ - void *lli_table_alloc_addr; - /* input lli table */ - struct sep_lli_entry_t *in_lli_table_ptr; - /* output lli table */ - struct sep_lli_entry_t *out_lli_table_ptr; - /* pointer to the info entry of the table - the last entry */ - struct sep_lli_entry_t *info_in_entry_ptr; - /* pointer to the info entry of the table - the last entry */ - struct sep_lli_entry_t *info_out_entry_ptr; - /* points to the first entry to be processed in the lli_in_array */ - unsigned long current_in_entry; - /* points to the first entry to be processed in the lli_out_array */ - unsigned long current_out_entry; - /* max size of the input table */ - unsigned long in_table_data_size; - /* max size of the output table */ - unsigned long out_table_data_size; - /* flag te signifies if this is the first tables build from the arrays */ - unsigned long first_table_flag; - /* the data size that should be in table */ - unsigned long table_data_size; - /* number of etnries in the input table */ - unsigned long num_entries_in_table; - /* number of etnries in the output table */ - unsigned long num_entries_out_table; - - dbg("SEP Driver:--------> sep_construct_dma_tables_from_lli start\n"); - - /* initiate to pint after the message area */ - lli_table_alloc_addr = sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES; - - current_in_entry = 0; - current_out_entry = 0; - first_table_flag = 1; - info_in_entry_ptr = 0; - info_out_entry_ptr = 0; - - /* loop till all the entries in in array are not processed */ - while (current_in_entry < sep_in_lli_entries) { - /* set the new input and output tables */ - in_lli_table_ptr = (struct sep_lli_entry_t *) lli_table_alloc_addr; - - lli_table_alloc_addr += sizeof(struct sep_lli_entry_t) * SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; - - /* set the first output tables */ - out_lli_table_ptr = (struct sep_lli_entry_t *) lli_table_alloc_addr; - - lli_table_alloc_addr += sizeof(struct sep_lli_entry_t) * SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; - - /* calculate the maximum size of data for input table */ - in_table_data_size = sep_calculate_lli_table_max_size(&lli_in_array[current_in_entry], (sep_in_lli_entries - current_in_entry)); - - /* calculate the maximum size of data for output table */ - out_table_data_size = sep_calculate_lli_table_max_size(&lli_out_array[current_out_entry], (sep_out_lli_entries - current_out_entry)); - - edbg("SEP Driver:in_table_data_size is %lu\n", in_table_data_size); - edbg("SEP Driver:out_table_data_size is %lu\n", out_table_data_size); - - /* check where the data is smallest */ - table_data_size = in_table_data_size; - if (table_data_size > out_table_data_size) - table_data_size = out_table_data_size; - - /* now calculate the table size so that it will be module block size */ - table_data_size = (table_data_size / block_size) * block_size; - - dbg("SEP Driver:table_data_size is %lu\n", table_data_size); - - /* construct input lli table */ - sep_build_lli_table(&lli_in_array[current_in_entry], in_lli_table_ptr, ¤t_in_entry, &num_entries_in_table, table_data_size); - - /* construct output lli table */ - sep_build_lli_table(&lli_out_array[current_out_entry], out_lli_table_ptr, ¤t_out_entry, &num_entries_out_table, table_data_size); - - /* if info entry is null - this is the first table built */ - if (info_in_entry_ptr == 0) { - /* set the output parameters to physical addresses */ - *lli_table_in_ptr = sep_shared_virt_to_bus(sep, in_lli_table_ptr); - *in_num_entries_ptr = num_entries_in_table; - *lli_table_out_ptr = sep_shared_virt_to_bus(sep, out_lli_table_ptr); - *out_num_entries_ptr = num_entries_out_table; - *table_data_size_ptr = table_data_size; - - edbg("SEP Driver:output lli_table_in_ptr is %08lx\n", *lli_table_in_ptr); - edbg("SEP Driver:output lli_table_out_ptr is %08lx\n", *lli_table_out_ptr); - } else { - /* update the info entry of the previous in table */ - info_in_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, in_lli_table_ptr); - info_in_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size); - - /* update the info entry of the previous in table */ - info_out_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, out_lli_table_ptr); - info_out_entry_ptr->block_size = ((num_entries_out_table) << 24) | (table_data_size); - } - - /* save the pointer to the info entry of the current tables */ - info_in_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1; - info_out_entry_ptr = out_lli_table_ptr + num_entries_out_table - 1; - - edbg("SEP Driver:output num_entries_out_table is %lu\n", (unsigned long) num_entries_out_table); - edbg("SEP Driver:output info_in_entry_ptr is %lu\n", (unsigned long) info_in_entry_ptr); - edbg("SEP Driver:output info_out_entry_ptr is %lu\n", (unsigned long) info_out_entry_ptr); - } - - /* print input tables */ - sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *) - sep_shared_bus_to_virt(sep, *lli_table_in_ptr), *in_num_entries_ptr, *table_data_size_ptr); - /* print output tables */ - sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *) - sep_shared_bus_to_virt(sep, *lli_table_out_ptr), *out_num_entries_ptr, *table_data_size_ptr); - dbg("SEP Driver:<-------- sep_construct_dma_tables_from_lli end\n"); - return 0; -} - - -/* - This function builds input and output DMA tables for synhronic - symmetric operations (AES, DES). It also checks that each table - is of the modular block size -*/ -static int sep_prepare_input_output_dma_table(struct sep_device *sep, - unsigned long app_virt_in_addr, - unsigned long app_virt_out_addr, - unsigned long data_size, - unsigned long block_size, - unsigned long *lli_table_in_ptr, unsigned long *lli_table_out_ptr, unsigned long *in_num_entries_ptr, unsigned long *out_num_entries_ptr, unsigned long *table_data_size_ptr, bool isKernelVirtualAddress) -{ - /* array of pointers of page */ - struct sep_lli_entry_t *lli_in_array; - /* array of pointers of page */ - struct sep_lli_entry_t *lli_out_array; - int result = 0; - - dbg("SEP Driver:--------> sep_prepare_input_output_dma_table start\n"); - - /* initialize the pages pointers */ - sep->in_page_array = 0; - sep->out_page_array = 0; - - /* check if the pages are in Kernel Virtual Address layout */ - if (isKernelVirtualAddress == true) { - /* lock the pages of the kernel buffer and translate them to pages */ - result = sep_lock_kernel_pages(sep, app_virt_in_addr, data_size, &sep->in_num_pages, &lli_in_array, &sep->in_page_array); - if (result) { - edbg("SEP Driver: sep_lock_kernel_pages for input virtual buffer failed\n"); - goto end_function; - } - } else { - /* lock the pages of the user buffer and translate them to pages */ - result = sep_lock_user_pages(sep, app_virt_in_addr, data_size, &sep->in_num_pages, &lli_in_array, &sep->in_page_array); - if (result) { - edbg("SEP Driver: sep_lock_user_pages for input virtual buffer failed\n"); - goto end_function; - } - } - - if (isKernelVirtualAddress == true) { - result = sep_lock_kernel_pages(sep, app_virt_out_addr, data_size, &sep->out_num_pages, &lli_out_array, &sep->out_page_array); - if (result) { - edbg("SEP Driver: sep_lock_kernel_pages for output virtual buffer failed\n"); - goto end_function_with_error1; - } - } else { - result = sep_lock_user_pages(sep, app_virt_out_addr, data_size, &sep->out_num_pages, &lli_out_array, &sep->out_page_array); - if (result) { - edbg("SEP Driver: sep_lock_user_pages for output virtual buffer failed\n"); - goto end_function_with_error1; - } - } - edbg("sep->in_num_pages is %lu\n", sep->in_num_pages); - edbg("sep->out_num_pages is %lu\n", sep->out_num_pages); - edbg("SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n", SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); - - - /* call the fucntion that creates table from the lli arrays */ - result = sep_construct_dma_tables_from_lli(sep, lli_in_array, sep->in_num_pages, lli_out_array, sep->out_num_pages, block_size, lli_table_in_ptr, lli_table_out_ptr, in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr); - if (result) { - edbg("SEP Driver: sep_construct_dma_tables_from_lli failed\n"); - goto end_function_with_error2; - } - - /* fall through - free the lli entry arrays */ - dbg("in_num_entries_ptr is %08lx\n", *in_num_entries_ptr); - dbg("out_num_entries_ptr is %08lx\n", *out_num_entries_ptr); - dbg("table_data_size_ptr is %08lx\n", *table_data_size_ptr); -end_function_with_error2: - kfree(lli_out_array); -end_function_with_error1: - kfree(lli_in_array); -end_function: - dbg("SEP Driver:<-------- sep_prepare_input_output_dma_table end result = %d\n", (int) result); - return result; - -} - -/* - this function handles tha request for creation of the DMA table - for the synchronic symmetric operations (AES,DES) -*/ -static int sep_create_sync_dma_tables_handler(struct sep_device *sep, - unsigned long arg) -{ - int error; - /* command arguments */ - struct sep_driver_build_sync_table_t command_args; - - dbg("SEP Driver:--------> sep_create_sync_dma_tables_handler start\n"); - - error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_sync_table_t)); - if (error) { - error = -EFAULT; - goto end_function; - } - - edbg("app_in_address is %08lx\n", command_args.app_in_address); - edbg("app_out_address is %08lx\n", command_args.app_out_address); - edbg("data_size is %lu\n", command_args.data_in_size); - edbg("block_size is %lu\n", command_args.block_size); - - /* check if we need to build only input table or input/output */ - if (command_args.app_out_address) - /* prepare input and output tables */ - error = sep_prepare_input_output_dma_table(sep, - command_args.app_in_address, - command_args.app_out_address, - command_args.data_in_size, - command_args.block_size, - &command_args.in_table_address, - &command_args.out_table_address, &command_args.in_table_num_entries, &command_args.out_table_num_entries, &command_args.table_data_size, command_args.isKernelVirtualAddress); - else - /* prepare input tables */ - error = sep_prepare_input_dma_table(sep, - command_args.app_in_address, - command_args.data_in_size, command_args.block_size, &command_args.in_table_address, &command_args.in_table_num_entries, &command_args.table_data_size, command_args.isKernelVirtualAddress); - - if (error) - goto end_function; - /* copy to user */ - if (copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_build_sync_table_t))) - error = -EFAULT; -end_function: - dbg("SEP Driver:<-------- sep_create_sync_dma_tables_handler end\n"); - return error; -} - -/* - this function handles the request for freeing dma table for synhronic actions -*/ -static int sep_free_dma_table_data_handler(struct sep_device *sep) -{ - dbg("SEP Driver:--------> sep_free_dma_table_data_handler start\n"); - - /* free input pages array */ - sep_free_dma_pages(sep->in_page_array, sep->in_num_pages, 0); - - /* free output pages array if needed */ - if (sep->out_page_array) - sep_free_dma_pages(sep->out_page_array, sep->out_num_pages, 1); - - /* reset all the values */ - sep->in_page_array = 0; - sep->out_page_array = 0; - sep->in_num_pages = 0; - sep->out_num_pages = 0; - dbg("SEP Driver:<-------- sep_free_dma_table_data_handler end\n"); - return 0; -} - -/* - this function find a space for the new flow dma table -*/ -static int sep_find_free_flow_dma_table_space(struct sep_device *sep, - unsigned long **table_address_ptr) -{ - int error = 0; - /* pointer to the id field of the flow dma table */ - unsigned long *start_table_ptr; - /* Do not make start_addr unsigned long * unless fixing the offset - computations ! */ - void *flow_dma_area_start_addr; - unsigned long *flow_dma_area_end_addr; - /* maximum table size in words */ - unsigned long table_size_in_words; - - /* find the start address of the flow DMA table area */ - flow_dma_area_start_addr = sep->shared_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES; - - /* set end address of the flow table area */ - flow_dma_area_end_addr = flow_dma_area_start_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES; - - /* set table size in words */ - table_size_in_words = SEP_DRIVER_MAX_FLOW_NUM_ENTRIES_IN_TABLE * (sizeof(struct sep_lli_entry_t) / sizeof(long)) + 2; - - /* set the pointer to the start address of DMA area */ - start_table_ptr = flow_dma_area_start_addr; - - /* find the space for the next table */ - while (((*start_table_ptr & 0x7FFFFFFF) != 0) && start_table_ptr < flow_dma_area_end_addr) - start_table_ptr += table_size_in_words; - - /* check if we reached the end of floa tables area */ - if (start_table_ptr >= flow_dma_area_end_addr) - error = -1; - else - *table_address_ptr = start_table_ptr; - - return error; -} - -/* - This function creates one DMA table for flow and returns its data, - and pointer to its info entry -*/ -static int sep_prepare_one_flow_dma_table(struct sep_device *sep, - unsigned long virt_buff_addr, - unsigned long virt_buff_size, - struct sep_lli_entry_t *table_data, - struct sep_lli_entry_t **info_entry_ptr, - struct sep_flow_context_t *flow_data_ptr, - bool isKernelVirtualAddress) -{ - int error; - /* the range in pages */ - unsigned long lli_array_size; - struct sep_lli_entry_t *lli_array; - struct sep_lli_entry_t *flow_dma_table_entry_ptr; - unsigned long *start_dma_table_ptr; - /* total table data counter */ - unsigned long dma_table_data_count; - /* pointer that will keep the pointer to the pages of the virtual buffer */ - struct page **page_array_ptr; - unsigned long entry_count; - - /* find the space for the new table */ - error = sep_find_free_flow_dma_table_space(sep, &start_dma_table_ptr); - if (error) - goto end_function; - - /* check if the pages are in Kernel Virtual Address layout */ - if (isKernelVirtualAddress == true) - /* lock kernel buffer in the memory */ - error = sep_lock_kernel_pages(sep, virt_buff_addr, virt_buff_size, &lli_array_size, &lli_array, &page_array_ptr); - else - /* lock user buffer in the memory */ - error = sep_lock_user_pages(sep, virt_buff_addr, virt_buff_size, &lli_array_size, &lli_array, &page_array_ptr); - - if (error) - goto end_function; - - /* set the pointer to page array at the beginning of table - this table is - now considered taken */ - *start_dma_table_ptr = lli_array_size; - - /* point to the place of the pages pointers of the table */ - start_dma_table_ptr++; - - /* set the pages pointer */ - *start_dma_table_ptr = (unsigned long) page_array_ptr; - - /* set the pointer to the first entry */ - flow_dma_table_entry_ptr = (struct sep_lli_entry_t *) (++start_dma_table_ptr); - - /* now create the entries for table */ - for (dma_table_data_count = entry_count = 0; entry_count < lli_array_size; entry_count++) { - flow_dma_table_entry_ptr->physical_address = lli_array[entry_count].physical_address; - - flow_dma_table_entry_ptr->block_size = lli_array[entry_count].block_size; - - /* set the total data of a table */ - dma_table_data_count += lli_array[entry_count].block_size; - - flow_dma_table_entry_ptr++; - } - - /* set the physical address */ - table_data->physical_address = virt_to_phys(start_dma_table_ptr); - - /* set the num_entries and total data size */ - table_data->block_size = ((lli_array_size + 1) << SEP_NUM_ENTRIES_OFFSET_IN_BITS) | (dma_table_data_count); - - /* set the info entry */ - flow_dma_table_entry_ptr->physical_address = 0xffffffff; - flow_dma_table_entry_ptr->block_size = 0; - - /* set the pointer to info entry */ - *info_entry_ptr = flow_dma_table_entry_ptr; - - /* the array of the lli entries */ - kfree(lli_array); -end_function: - return error; -} - - - -/* - This function creates a list of tables for flow and returns the data for - the first and last tables of the list -*/ -static int sep_prepare_flow_dma_tables(struct sep_device *sep, - unsigned long num_virtual_buffers, - unsigned long first_buff_addr, struct sep_flow_context_t *flow_data_ptr, struct sep_lli_entry_t *first_table_data_ptr, struct sep_lli_entry_t *last_table_data_ptr, bool isKernelVirtualAddress) -{ - int error; - unsigned long virt_buff_addr; - unsigned long virt_buff_size; - struct sep_lli_entry_t table_data; - struct sep_lli_entry_t *info_entry_ptr; - struct sep_lli_entry_t *prev_info_entry_ptr; - unsigned long i; - - /* init vars */ - error = 0; - prev_info_entry_ptr = 0; - - /* init the first table to default */ - table_data.physical_address = 0xffffffff; - first_table_data_ptr->physical_address = 0xffffffff; - table_data.block_size = 0; - - for (i = 0; i < num_virtual_buffers; i++) { - /* get the virtual buffer address */ - error = get_user(virt_buff_addr, &first_buff_addr); - if (error) - goto end_function; - - /* get the virtual buffer size */ - first_buff_addr++; - error = get_user(virt_buff_size, &first_buff_addr); - if (error) - goto end_function; - - /* advance the address to point to the next pair of address|size */ - first_buff_addr++; - - /* now prepare the one flow LLI table from the data */ - error = sep_prepare_one_flow_dma_table(sep, virt_buff_addr, virt_buff_size, &table_data, &info_entry_ptr, flow_data_ptr, isKernelVirtualAddress); - if (error) - goto end_function; - - if (i == 0) { - /* if this is the first table - save it to return to the user - application */ - *first_table_data_ptr = table_data; - - /* set the pointer to info entry */ - prev_info_entry_ptr = info_entry_ptr; - } else { - /* not first table - the previous table info entry should - be updated */ - prev_info_entry_ptr->block_size = (0x1 << SEP_INT_FLAG_OFFSET_IN_BITS) | (table_data.block_size); - - /* set the pointer to info entry */ - prev_info_entry_ptr = info_entry_ptr; - } - } - - /* set the last table data */ - *last_table_data_ptr = table_data; -end_function: - return error; -} - -/* - this function goes over all the flow tables connected to the given - table and deallocate them -*/ -static void sep_deallocated_flow_tables(struct sep_lli_entry_t *first_table_ptr) -{ - /* id pointer */ - unsigned long *table_ptr; - /* end address of the flow dma area */ - unsigned long num_entries; - unsigned long num_pages; - struct page **pages_ptr; - /* maximum table size in words */ - struct sep_lli_entry_t *info_entry_ptr; - - /* set the pointer to the first table */ - table_ptr = (unsigned long *) first_table_ptr->physical_address; - - /* set the num of entries */ - num_entries = (first_table_ptr->block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) - & SEP_NUM_ENTRIES_MASK; - - /* go over all the connected tables */ - while (*table_ptr != 0xffffffff) { - /* get number of pages */ - num_pages = *(table_ptr - 2); - - /* get the pointer to the pages */ - pages_ptr = (struct page **) (*(table_ptr - 1)); - - /* free the pages */ - sep_free_dma_pages(pages_ptr, num_pages, 1); - - /* goto to the info entry */ - info_entry_ptr = ((struct sep_lli_entry_t *) table_ptr) + (num_entries - 1); - - table_ptr = (unsigned long *) info_entry_ptr->physical_address; - num_entries = (info_entry_ptr->block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK; - } - - return; -} - -/** - * sep_find_flow_context - find a flow - * @sep: the SEP we are working with - * @flow_id: flow identifier - * - * Returns a pointer the matching flow, or NULL if the flow does not - * exist. - */ - -static struct sep_flow_context_t *sep_find_flow_context(struct sep_device *sep, - unsigned long flow_id) -{ - int count; - /* - * always search for flow with id default first - in case we - * already started working on the flow there can be no situation - * when 2 flows are with default flag - */ - for (count = 0; count < SEP_DRIVER_NUM_FLOWS; count++) { - if (sep->flows[count].flow_id == flow_id) - return &sep->flows[count]; - } - return NULL; -} - - -/* - this function handles the request to create the DMA tables for flow -*/ -static int sep_create_flow_dma_tables_handler(struct sep_device *sep, - unsigned long arg) -{ - int error = -ENOENT; - struct sep_driver_build_flow_table_t command_args; - /* first table - output */ - struct sep_lli_entry_t first_table_data; - /* dma table data */ - struct sep_lli_entry_t last_table_data; - /* pointer to the info entry of the previuos DMA table */ - struct sep_lli_entry_t *prev_info_entry_ptr; - /* pointer to the flow data strucutre */ - struct sep_flow_context_t *flow_context_ptr; - - dbg("SEP Driver:--------> sep_create_flow_dma_tables_handler start\n"); - - /* init variables */ - prev_info_entry_ptr = 0; - first_table_data.physical_address = 0xffffffff; - - /* find the free structure for flow data */ - error = -EINVAL; - flow_context_ptr = sep_find_flow_context(sep, SEP_FREE_FLOW_ID); - if (flow_context_ptr == NULL) - goto end_function; - - error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_flow_table_t)); - if (error) { - error = -EFAULT; - goto end_function; - } - - /* create flow tables */ - error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress); - if (error) - goto end_function_with_error; - - /* check if flow is static */ - if (!command_args.flow_type) - /* point the info entry of the last to the info entry of the first */ - last_table_data = first_table_data; - - /* set output params */ - command_args.first_table_addr = first_table_data.physical_address; - command_args.first_table_num_entries = ((first_table_data.block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK); - command_args.first_table_data_size = (first_table_data.block_size & SEP_TABLE_DATA_SIZE_MASK); - - /* send the parameters to user application */ - error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_build_flow_table_t)); - if (error) { - error = -EFAULT; - goto end_function_with_error; - } - - /* all the flow created - update the flow entry with temp id */ - flow_context_ptr->flow_id = SEP_TEMP_FLOW_ID; - - /* set the processing tables data in the context */ - if (command_args.input_output_flag == SEP_DRIVER_IN_FLAG) - flow_context_ptr->input_tables_in_process = first_table_data; - else - flow_context_ptr->output_tables_in_process = first_table_data; - - goto end_function; - -end_function_with_error: - /* free the allocated tables */ - sep_deallocated_flow_tables(&first_table_data); -end_function: - dbg("SEP Driver:<-------- sep_create_flow_dma_tables_handler end\n"); - return error; -} - -/* - this function handles add tables to flow -*/ -static int sep_add_flow_tables_handler(struct sep_device *sep, unsigned long arg) -{ - int error; - unsigned long num_entries; - struct sep_driver_add_flow_table_t command_args; - struct sep_flow_context_t *flow_context_ptr; - /* first dma table data */ - struct sep_lli_entry_t first_table_data; - /* last dma table data */ - struct sep_lli_entry_t last_table_data; - /* pointer to the info entry of the current DMA table */ - struct sep_lli_entry_t *info_entry_ptr; - - dbg("SEP Driver:--------> sep_add_flow_tables_handler start\n"); - - /* get input parameters */ - error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_flow_table_t)); - if (error) { - error = -EFAULT; - goto end_function; - } - - /* find the flow structure for the flow id */ - flow_context_ptr = sep_find_flow_context(sep, command_args.flow_id); - if (flow_context_ptr == NULL) - goto end_function; - - /* prepare the flow dma tables */ - error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress); - if (error) - goto end_function_with_error; - - /* now check if there is already an existing add table for this flow */ - if (command_args.inputOutputFlag == SEP_DRIVER_IN_FLAG) { - /* this buffer was for input buffers */ - if (flow_context_ptr->input_tables_flag) { - /* add table already exists - add the new tables to the end - of the previous */ - num_entries = (flow_context_ptr->last_input_table.block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK; - - info_entry_ptr = (struct sep_lli_entry_t *) - (flow_context_ptr->last_input_table.physical_address + (sizeof(struct sep_lli_entry_t) * (num_entries - 1))); - - /* connect to list of tables */ - *info_entry_ptr = first_table_data; - - /* set the first table data */ - first_table_data = flow_context_ptr->first_input_table; - } else { - /* set the input flag */ - flow_context_ptr->input_tables_flag = 1; - - /* set the first table data */ - flow_context_ptr->first_input_table = first_table_data; - } - /* set the last table data */ - flow_context_ptr->last_input_table = last_table_data; - } else { /* this is output tables */ - - /* this buffer was for input buffers */ - if (flow_context_ptr->output_tables_flag) { - /* add table already exists - add the new tables to - the end of the previous */ - num_entries = (flow_context_ptr->last_output_table.block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK; - - info_entry_ptr = (struct sep_lli_entry_t *) - (flow_context_ptr->last_output_table.physical_address + (sizeof(struct sep_lli_entry_t) * (num_entries - 1))); - - /* connect to list of tables */ - *info_entry_ptr = first_table_data; - - /* set the first table data */ - first_table_data = flow_context_ptr->first_output_table; - } else { - /* set the input flag */ - flow_context_ptr->output_tables_flag = 1; - - /* set the first table data */ - flow_context_ptr->first_output_table = first_table_data; - } - /* set the last table data */ - flow_context_ptr->last_output_table = last_table_data; - } - - /* set output params */ - command_args.first_table_addr = first_table_data.physical_address; - command_args.first_table_num_entries = ((first_table_data.block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK); - command_args.first_table_data_size = (first_table_data.block_size & SEP_TABLE_DATA_SIZE_MASK); - - /* send the parameters to user application */ - error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_add_flow_table_t)); - if (error) - error = -EFAULT; -end_function_with_error: - /* free the allocated tables */ - sep_deallocated_flow_tables(&first_table_data); -end_function: - dbg("SEP Driver:<-------- sep_add_flow_tables_handler end\n"); - return error; -} - -/* - this function add the flow add message to the specific flow -*/ -static int sep_add_flow_tables_message_handler(struct sep_device *sep, unsigned long arg) -{ - int error; - struct sep_driver_add_message_t command_args; - struct sep_flow_context_t *flow_context_ptr; - - dbg("SEP Driver:--------> sep_add_flow_tables_message_handler start\n"); - - error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_message_t)); - if (error) { - error = -EFAULT; - goto end_function; - } - - /* check input */ - if (command_args.message_size_in_bytes > SEP_MAX_ADD_MESSAGE_LENGTH_IN_BYTES) { - error = -ENOMEM; - goto end_function; - } - - /* find the flow context */ - flow_context_ptr = sep_find_flow_context(sep, command_args.flow_id); - if (flow_context_ptr == NULL) - goto end_function; - - /* copy the message into context */ - flow_context_ptr->message_size_in_bytes = command_args.message_size_in_bytes; - error = copy_from_user(flow_context_ptr->message, (void *) command_args.message_address, command_args.message_size_in_bytes); - if (error) - error = -EFAULT; -end_function: - dbg("SEP Driver:<-------- sep_add_flow_tables_message_handler end\n"); - return error; -} - - -/* - this function returns the bus and virtual addresses of the static pool -*/ -static int sep_get_static_pool_addr_handler(struct sep_device *sep, unsigned long arg) -{ - int error; - struct sep_driver_static_pool_addr_t command_args; - - dbg("SEP Driver:--------> sep_get_static_pool_addr_handler start\n"); - - /*prepare the output parameters in the struct */ - command_args.physical_static_address = sep->shared_bus + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES; - command_args.virtual_static_address = (unsigned long)sep->shared_addr + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES; - - edbg("SEP Driver:bus_static_address is %08lx, virtual_static_address %08lx\n", command_args.physical_static_address, command_args.virtual_static_address); - - /* send the parameters to user application */ - error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_static_pool_addr_t)); - if (error) - error = -EFAULT; - dbg("SEP Driver:<-------- sep_get_static_pool_addr_handler end\n"); - return error; -} - -/* - this address gets the offset of the physical address from the start - of the mapped area -*/ -static int sep_get_physical_mapped_offset_handler(struct sep_device *sep, unsigned long arg) -{ - int error; - struct sep_driver_get_mapped_offset_t command_args; - - dbg("SEP Driver:--------> sep_get_physical_mapped_offset_handler start\n"); - - error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_get_mapped_offset_t)); - if (error) { - error = -EFAULT; - goto end_function; - } - - if (command_args.physical_address < sep->shared_bus) { - error = -EINVAL; - goto end_function; - } - - /*prepare the output parameters in the struct */ - command_args.offset = command_args.physical_address - sep->shared_bus; - - edbg("SEP Driver:bus_address is %08lx, offset is %lu\n", command_args.physical_address, command_args.offset); - - /* send the parameters to user application */ - error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_get_mapped_offset_t)); - if (error) - error = -EFAULT; -end_function: - dbg("SEP Driver:<-------- sep_get_physical_mapped_offset_handler end\n"); - return error; -} - - -/* - ? -*/ -static int sep_start_handler(struct sep_device *sep) -{ - unsigned long reg_val; - unsigned long error = 0; - - dbg("SEP Driver:--------> sep_start_handler start\n"); - - /* wait in polling for message from SEP */ - do - reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); - while (!reg_val); - - /* check the value */ - if (reg_val == 0x1) - /* fatal error - read error status from GPRO */ - error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); - dbg("SEP Driver:<-------- sep_start_handler end\n"); - return error; -} - -/* - this function handles the request for SEP initialization -*/ -static int sep_init_handler(struct sep_device *sep, unsigned long arg) -{ - unsigned long message_word; - unsigned long *message_ptr; - struct sep_driver_init_t command_args; - unsigned long counter; - unsigned long error; - unsigned long reg_val; - - dbg("SEP Driver:--------> sep_init_handler start\n"); - error = 0; - - error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_init_t)); - if (error) { - error = -EFAULT; - goto end_function; - } - dbg("SEP Driver:--------> sep_init_handler - finished copy_from_user\n"); - - /* PATCH - configure the DMA to single -burst instead of multi-burst */ - /*sep_configure_dma_burst(); */ - - dbg("SEP Driver:--------> sep_init_handler - finished sep_configure_dma_burst \n"); - - message_ptr = (unsigned long *) command_args.message_addr; - - /* set the base address of the SRAM */ - sep_write_reg(sep, HW_SRAM_ADDR_REG_ADDR, HW_CC_SRAM_BASE_ADDRESS); - - for (counter = 0; counter < command_args.message_size_in_words; counter++, message_ptr++) { - get_user(message_word, message_ptr); - /* write data to SRAM */ - sep_write_reg(sep, HW_SRAM_DATA_REG_ADDR, message_word); - edbg("SEP Driver:message_word is %lu\n", message_word); - /* wait for write complete */ - sep_wait_sram_write(sep); - } - dbg("SEP Driver:--------> sep_init_handler - finished getting messages from user space\n"); - /* signal SEP */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1); - - do - reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); - while (!(reg_val & 0xFFFFFFFD)); - - dbg("SEP Driver:--------> sep_init_handler - finished waiting for reg_val & 0xFFFFFFFD \n"); - - /* check the value */ - if (reg_val == 0x1) { - edbg("SEP Driver:init failed\n"); - - error = sep_read_reg(sep, 0x8060); - edbg("SEP Driver:sw monitor is %lu\n", error); - - /* fatal error - read erro status from GPRO */ - error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); - edbg("SEP Driver:error is %lu\n", error); - } -end_function: - dbg("SEP Driver:<-------- sep_init_handler end\n"); - return error; - -} - -/* - this function handles the request cache and resident reallocation -*/ -static int sep_realloc_cache_resident_handler(struct sep_device *sep, - unsigned long arg) -{ - struct sep_driver_realloc_cache_resident_t command_args; - int error; - - /* copy cache and resident to the their intended locations */ - error = sep_load_firmware(sep); - if (error) - return error; - - command_args.new_base_addr = sep->shared_bus; - - /* find the new base address according to the lowest address between - cache, resident and shared area */ - if (sep->resident_bus < command_args.new_base_addr) - command_args.new_base_addr = sep->resident_bus; - if (sep->rar_bus < command_args.new_base_addr) - command_args.new_base_addr = sep->rar_bus; - - /* set the return parameters */ - command_args.new_cache_addr = sep->rar_bus; - command_args.new_resident_addr = sep->resident_bus; - - /* set the new shared area */ - command_args.new_shared_area_addr = sep->shared_bus; - - edbg("SEP Driver:command_args.new_shared_addr is %08llx\n", command_args.new_shared_area_addr); - edbg("SEP Driver:command_args.new_base_addr is %08llx\n", command_args.new_base_addr); - edbg("SEP Driver:command_args.new_resident_addr is %08llx\n", command_args.new_resident_addr); - edbg("SEP Driver:command_args.new_rar_addr is %08llx\n", command_args.new_cache_addr); - - /* return to user */ - if (copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_realloc_cache_resident_t))) - return -EFAULT; - return 0; -} - -/** - * sep_get_time_handler - time request from user space - * @sep: sep we are to set the time for - * @arg: pointer to user space arg buffer - * - * This function reports back the time and the address in the SEP - * shared buffer at which it has been placed. (Do we really need this!!!) - */ - -static int sep_get_time_handler(struct sep_device *sep, unsigned long arg) -{ - struct sep_driver_get_time_t command_args; - - mutex_lock(&sep_mutex); - command_args.time_value = sep_set_time(sep); - command_args.time_physical_address = (unsigned long)sep_time_address(sep); - mutex_unlock(&sep_mutex); - if (copy_to_user((void __user *)arg, - &command_args, sizeof(struct sep_driver_get_time_t))) - return -EFAULT; - return 0; - -} - -/* - This API handles the end transaction request -*/ -static int sep_end_transaction_handler(struct sep_device *sep, unsigned long arg) -{ - dbg("SEP Driver:--------> sep_end_transaction_handler start\n"); - -#if 0 /*!SEP_DRIVER_POLLING_MODE */ - /* close IMR */ - sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, 0x7FFF); - - /* release IRQ line */ - free_irq(SEP_DIRVER_IRQ_NUM, sep); - - /* lock the sep mutex */ - mutex_unlock(&sep_mutex); -#endif - - dbg("SEP Driver:<-------- sep_end_transaction_handler end\n"); - - return 0; -} - - -/** - * sep_set_flow_id_handler - handle flow setting - * @sep: the SEP we are configuring - * @flow_id: the flow we are setting - * - * This function handler the set flow id command - */ -static int sep_set_flow_id_handler(struct sep_device *sep, - unsigned long flow_id) -{ - int error = 0; - struct sep_flow_context_t *flow_data_ptr; - - /* find the flow data structure that was just used for creating new flow - - its id should be default */ - - mutex_lock(&sep_mutex); - flow_data_ptr = sep_find_flow_context(sep, SEP_TEMP_FLOW_ID); - if (flow_data_ptr) - flow_data_ptr->flow_id = flow_id; /* set flow id */ - else - error = -EINVAL; - mutex_unlock(&sep_mutex); - return error; -} - -static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - int error = 0; - struct sep_device *sep = filp->private_data; - - dbg("------------>SEP Driver: ioctl start\n"); - - edbg("SEP Driver: cmd is %x\n", cmd); - - switch (cmd) { - case SEP_IOCSENDSEPCOMMAND: - /* send command to SEP */ - sep_send_command_handler(sep); - edbg("SEP Driver: after sep_send_command_handler\n"); - break; - case SEP_IOCSENDSEPRPLYCOMMAND: - /* send reply command to SEP */ - sep_send_reply_command_handler(sep); - break; - case SEP_IOCALLOCDATAPOLL: - /* allocate data pool */ - error = sep_allocate_data_pool_memory_handler(sep, arg); - break; - case SEP_IOCWRITEDATAPOLL: - /* write data into memory pool */ - error = sep_write_into_data_pool_handler(sep, arg); - break; - case SEP_IOCREADDATAPOLL: - /* read data from data pool into application memory */ - error = sep_read_from_data_pool_handler(sep, arg); - break; - case SEP_IOCCREATESYMDMATABLE: - /* create dma table for synhronic operation */ - error = sep_create_sync_dma_tables_handler(sep, arg); - break; - case SEP_IOCCREATEFLOWDMATABLE: - /* create flow dma tables */ - error = sep_create_flow_dma_tables_handler(sep, arg); - break; - case SEP_IOCFREEDMATABLEDATA: - /* free the pages */ - error = sep_free_dma_table_data_handler(sep); - break; - case SEP_IOCSETFLOWID: - /* set flow id */ - error = sep_set_flow_id_handler(sep, (unsigned long)arg); - break; - case SEP_IOCADDFLOWTABLE: - /* add tables to the dynamic flow */ - error = sep_add_flow_tables_handler(sep, arg); - break; - case SEP_IOCADDFLOWMESSAGE: - /* add message of add tables to flow */ - error = sep_add_flow_tables_message_handler(sep, arg); - break; - case SEP_IOCSEPSTART: - /* start command to sep */ - error = sep_start_handler(sep); - break; - case SEP_IOCSEPINIT: - /* init command to sep */ - error = sep_init_handler(sep, arg); - break; - case SEP_IOCGETSTATICPOOLADDR: - /* get the physical and virtual addresses of the static pool */ - error = sep_get_static_pool_addr_handler(sep, arg); - break; - case SEP_IOCENDTRANSACTION: - error = sep_end_transaction_handler(sep, arg); - break; - case SEP_IOCREALLOCCACHERES: - error = sep_realloc_cache_resident_handler(sep, arg); - break; - case SEP_IOCGETMAPPEDADDROFFSET: - error = sep_get_physical_mapped_offset_handler(sep, arg); - break; - case SEP_IOCGETIME: - error = sep_get_time_handler(sep, arg); - break; - default: - error = -ENOTTY; - break; - } - dbg("SEP Driver:<-------- ioctl end\n"); - return error; -} - - - -#if !SEP_DRIVER_POLLING_MODE - -/* handler for flow done interrupt */ - -static void sep_flow_done_handler(struct work_struct *work) -{ - struct sep_flow_context_t *flow_data_ptr; - - /* obtain the mutex */ - mutex_lock(&sep_mutex); - - /* get the pointer to context */ - flow_data_ptr = (struct sep_flow_context_t *) work; - - /* free all the current input tables in sep */ - sep_deallocated_flow_tables(&flow_data_ptr->input_tables_in_process); - - /* free all the current tables output tables in SEP (if needed) */ - if (flow_data_ptr->output_tables_in_process.physical_address != 0xffffffff) - sep_deallocated_flow_tables(&flow_data_ptr->output_tables_in_process); - - /* check if we have additional tables to be sent to SEP only input - flag may be checked */ - if (flow_data_ptr->input_tables_flag) { - /* copy the message to the shared RAM and signal SEP */ - memcpy((void *) flow_data_ptr->message, (void *) sep->shared_addr, flow_data_ptr->message_size_in_bytes); - - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, 0x2); - } - mutex_unlock(&sep_mutex); -} -/* - interrupt handler function -*/ -static irqreturn_t sep_inthandler(int irq, void *dev_id) -{ - irqreturn_t int_error; - unsigned long reg_val; - unsigned long flow_id; - struct sep_flow_context_t *flow_context_ptr; - struct sep_device *sep = dev_id; - - int_error = IRQ_HANDLED; - - /* read the IRR register to check if this is SEP interrupt */ - reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR); - edbg("SEP Interrupt - reg is %08lx\n", reg_val); - - /* check if this is the flow interrupt */ - if (0 /*reg_val & (0x1 << 11) */ ) { - /* read GPRO to find out the which flow is done */ - flow_id = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR); - - /* find the contex of the flow */ - flow_context_ptr = sep_find_flow_context(sep, flow_id >> 28); - if (flow_context_ptr == NULL) - goto end_function_with_error; - - /* queue the work */ - INIT_WORK(&flow_context_ptr->flow_wq, sep_flow_done_handler); - queue_work(sep->flow_wq, &flow_context_ptr->flow_wq); - - } else { - /* check if this is reply interrupt from SEP */ - if (reg_val & (0x1 << 13)) { - /* update the counter of reply messages */ - sep->reply_ct++; - /* wake up the waiting process */ - wake_up(&sep_event); - } else { - int_error = IRQ_NONE; - goto end_function; - } - } -end_function_with_error: - /* clear the interrupt */ - sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val); -end_function: - return int_error; -} - -#endif - - - -#if 0 - -static void sep_wait_busy(struct sep_device *sep) -{ - u32 reg; - - do { - reg = sep_read_reg(sep, HW_HOST_SEP_BUSY_REG_ADDR); - } while (reg); -} - -/* - PATCH for configuring the DMA to single burst instead of multi-burst -*/ -static void sep_configure_dma_burst(struct sep_device *sep) -{ -#define HW_AHB_RD_WR_BURSTS_REG_ADDR 0x0E10UL - - dbg("SEP Driver:<-------- sep_configure_dma_burst start \n"); - - /* request access to registers from SEP */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); - - dbg("SEP Driver:<-------- sep_configure_dma_burst finished request access to registers from SEP (write reg) \n"); - - sep_wait_busy(sep); - - dbg("SEP Driver:<-------- sep_configure_dma_burst finished request access to registers from SEP (while(revVal) wait loop) \n"); - - /* set the DMA burst register to single burst */ - sep_write_reg(sep, HW_AHB_RD_WR_BURSTS_REG_ADDR, 0x0UL); - - /* release the sep busy */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x0UL); - sep_wait_busy(sep); - - dbg("SEP Driver:<-------- sep_configure_dma_burst done \n"); - -} - -#endif - -/* - Function that is activated on the successful probe of the SEP device -*/ -static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int error = 0; - struct sep_device *sep; - int counter; - int size; /* size of memory for allocation */ - - edbg("Sep pci probe starting\n"); - if (sep_dev != NULL) { - dev_warn(&pdev->dev, "only one SEP supported.\n"); - return -EBUSY; - } - - /* enable the device */ - error = pci_enable_device(pdev); - if (error) { - edbg("error enabling pci device\n"); - goto end_function; - } - - /* set the pci dev pointer */ - sep_dev = &sep_instance; - sep = &sep_instance; - - edbg("sep->shared_addr = %p\n", sep->shared_addr); - /* transaction counter that coordinates the transactions between SEP - and HOST */ - sep->send_ct = 0; - /* counter for the messages from sep */ - sep->reply_ct = 0; - /* counter for the number of bytes allocated in the pool - for the current transaction */ - sep->data_pool_bytes_allocated = 0; - - /* calculate the total size for allocation */ - size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + - SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES; - - /* allocate the shared area */ - if (sep_map_and_alloc_shared_area(sep, size)) { - error = -ENOMEM; - /* allocation failed */ - goto end_function_error; - } - /* now set the memory regions */ -#if (SEP_DRIVER_RECONFIG_MESSAGE_AREA == 1) - /* Note: this test section will need moving before it could ever - work as the registers are not yet mapped ! */ - /* send the new SHARED MESSAGE AREA to the SEP */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus); - - /* poll for SEP response */ - retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); - while (retval != 0xffffffff && retval != sep->shared_bus) - retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); - - /* check the return value (register) */ - if (retval != sep->shared_bus) { - error = -ENOMEM; - goto end_function_deallocate_sep_shared_area; - } -#endif - /* init the flow contextes */ - for (counter = 0; counter < SEP_DRIVER_NUM_FLOWS; counter++) - sep->flows[counter].flow_id = SEP_FREE_FLOW_ID; - - sep->flow_wq = create_singlethread_workqueue("sepflowwq"); - if (sep->flow_wq == NULL) { - error = -ENOMEM; - edbg("sep_driver:flow queue creation failed\n"); - goto end_function_deallocate_sep_shared_area; - } - edbg("SEP Driver: create flow workqueue \n"); - sep->pdev = pci_dev_get(pdev); - - sep->reg_addr = pci_ioremap_bar(pdev, 0); - if (!sep->reg_addr) { - edbg("sep: ioremap of registers failed.\n"); - goto end_function_deallocate_sep_shared_area; - } - edbg("SEP Driver:reg_addr is %p\n", sep->reg_addr); - - /* load the rom code */ - sep_load_rom_code(sep); - - /* set up system base address and shared memory location */ - sep->rar_addr = dma_alloc_coherent(&sep->pdev->dev, - 2 * SEP_RAR_IO_MEM_REGION_SIZE, - &sep->rar_bus, GFP_KERNEL); - - if (!sep->rar_addr) { - edbg("SEP Driver:can't allocate rar\n"); - goto end_function_uniomap; - } - - - edbg("SEP Driver:rar_bus is %08llx\n", (unsigned long long)sep->rar_bus); - edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr); - -#if !SEP_DRIVER_POLLING_MODE - - edbg("SEP Driver: about to write IMR and ICR REG_ADDR\n"); - - /* clear ICR register */ - sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF); - - /* set the IMR register - open only GPR 2 */ - sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); - - edbg("SEP Driver: about to call request_irq\n"); - /* get the interrupt line */ - error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED, "sep_driver", sep); - if (error) - goto end_function_free_res; - return 0; - edbg("SEP Driver: about to write IMR REG_ADDR"); - - /* set the IMR register - open only GPR 2 */ - sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); - -end_function_free_res: - dma_free_coherent(&sep->pdev->dev, 2 * SEP_RAR_IO_MEM_REGION_SIZE, - sep->rar_addr, sep->rar_bus); -#endif /* SEP_DRIVER_POLLING_MODE */ -end_function_uniomap: - iounmap(sep->reg_addr); -end_function_deallocate_sep_shared_area: - /* de-allocate shared area */ - sep_unmap_and_free_shared_area(sep, size); -end_function_error: - sep_dev = NULL; -end_function: - return error; -} - -static const struct pci_device_id sep_pci_id_tbl[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080c)}, - {0} -}; - -MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl); - -/* field for registering driver to PCI device */ -static struct pci_driver sep_pci_driver = { - .name = "sep_sec_driver", - .id_table = sep_pci_id_tbl, - .probe = sep_probe - /* FIXME: remove handler */ -}; - -/* major and minor device numbers */ -static dev_t sep_devno; - -/* the files operations structure of the driver */ -static struct file_operations sep_file_operations = { - .owner = THIS_MODULE, - .unlocked_ioctl = sep_ioctl, - .poll = sep_poll, - .open = sep_open, - .release = sep_release, - .mmap = sep_mmap, -}; - - -/* cdev struct of the driver */ -static struct cdev sep_cdev; - -/* - this function registers the driver to the file system -*/ -static int sep_register_driver_to_fs(void) -{ - int ret_val = alloc_chrdev_region(&sep_devno, 0, 1, "sep_sec_driver"); - if (ret_val) { - edbg("sep: major number allocation failed, retval is %d\n", - ret_val); - return ret_val; - } - /* init cdev */ - cdev_init(&sep_cdev, &sep_file_operations); - sep_cdev.owner = THIS_MODULE; - - /* register the driver with the kernel */ - ret_val = cdev_add(&sep_cdev, sep_devno, 1); - if (ret_val) { - edbg("sep_driver:cdev_add failed, retval is %d\n", ret_val); - /* unregister dev numbers */ - unregister_chrdev_region(sep_devno, 1); - } - return ret_val; -} - - -/*-------------------------------------------------------------- - init function -----------------------------------------------------------------*/ -static int __init sep_init(void) -{ - int ret_val = 0; - dbg("SEP Driver:-------->Init start\n"); - /* FIXME: Probe can occur before we are ready to survive a probe */ - ret_val = pci_register_driver(&sep_pci_driver); - if (ret_val) { - edbg("sep_driver:sep_driver_to_device failed, ret_val is %d\n", ret_val); - goto end_function_unregister_from_fs; - } - /* register driver to fs */ - ret_val = sep_register_driver_to_fs(); - if (ret_val) - goto end_function_unregister_pci; - goto end_function; -end_function_unregister_pci: - pci_unregister_driver(&sep_pci_driver); -end_function_unregister_from_fs: - /* unregister from fs */ - cdev_del(&sep_cdev); - /* unregister dev numbers */ - unregister_chrdev_region(sep_devno, 1); -end_function: - dbg("SEP Driver:<-------- Init end\n"); - return ret_val; -} - - -/*------------------------------------------------------------- - exit function ---------------------------------------------------------------*/ -static void __exit sep_exit(void) -{ - int size; - - dbg("SEP Driver:--------> Exit start\n"); - - /* unregister from fs */ - cdev_del(&sep_cdev); - /* unregister dev numbers */ - unregister_chrdev_region(sep_devno, 1); - /* calculate the total size for de-allocation */ - size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + - SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES; - /* FIXME: We need to do this in the unload for the device */ - /* free shared area */ - if (sep_dev) { - sep_unmap_and_free_shared_area(sep_dev, size); - edbg("SEP Driver: free pages SEP SHARED AREA \n"); - iounmap((void *) sep_dev->reg_addr); - edbg("SEP Driver: iounmap \n"); - } - edbg("SEP Driver: release_mem_region \n"); - dbg("SEP Driver:<-------- Exit end\n"); -} - - -module_init(sep_init); -module_exit(sep_exit); - -MODULE_LICENSE("GPL"); |
