diff options
Diffstat (limited to 'drivers/staging/sbe-2t3e3/ctrl.h')
| -rw-r--r-- | drivers/staging/sbe-2t3e3/ctrl.h | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/drivers/staging/sbe-2t3e3/ctrl.h b/drivers/staging/sbe-2t3e3/ctrl.h new file mode 100644 index 0000000..c11a588 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/ctrl.h @@ -0,0 +1,131 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#ifndef CTRL_H +#define CTRL_H + +#define SBE_2T3E3_OFF 0 +#define SBE_2T3E3_ON 1 + +#define SBE_2T3E3_LED_NONE 0 +#define SBE_2T3E3_LED_GREEN 1 +#define SBE_2T3E3_LED_YELLOW 2 + +#define SBE_2T3E3_CABLE_LENGTH_LESS_THAN_255_FEET 0 +#define SBE_2T3E3_CABLE_LENGTH_GREATER_THAN_255_FEET 1 + +#define SBE_2T3E3_CRC_16 0 +#define SBE_2T3E3_CRC_32 1 + +#define SBE_2T3E3_PANEL_FRONT 0 +#define SBE_2T3E3_PANEL_REAR 1 + +#define SBE_2T3E3_FRAME_MODE_HDLC 0 +#define SBE_2T3E3_FRAME_MODE_TRANSPARENT 1 +#define SBE_2T3E3_FRAME_MODE_RAW 2 + +#define SBE_2T3E3_FRAME_TYPE_E3_G751 0 +#define SBE_2T3E3_FRAME_TYPE_E3_G832 1 +#define SBE_2T3E3_FRAME_TYPE_T3_CBIT 2 +#define SBE_2T3E3_FRAME_TYPE_T3_M13 3 + +#define SBE_2T3E3_FRACTIONAL_MODE_NONE 0 +#define SBE_2T3E3_FRACTIONAL_MODE_0 1 +#define SBE_2T3E3_FRACTIONAL_MODE_1 2 +#define SBE_2T3E3_FRACTIONAL_MODE_2 3 + +#define SBE_2T3E3_SCRAMBLER_OFF 0 +#define SBE_2T3E3_SCRAMBLER_LARSCOM 1 +#define SBE_2T3E3_SCRAMBLER_ADC_KENTROX_DIGITAL 2 + +#define SBE_2T3E3_TIMING_LOCAL 0 +#define SBE_2T3E3_TIMING_LOOP 1 + +#define SBE_2T3E3_LOOPBACK_NONE 0 +#define SBE_2T3E3_LOOPBACK_ETHERNET 1 +#define SBE_2T3E3_LOOPBACK_FRAMER 2 +#define SBE_2T3E3_LOOPBACK_LIU_DIGITAL 3 +#define SBE_2T3E3_LOOPBACK_LIU_ANALOG 4 +#define SBE_2T3E3_LOOPBACK_LIU_REMOTE 5 + +#define SBE_2T3E3_PAD_COUNT_1 1 +#define SBE_2T3E3_PAD_COUNT_2 2 +#define SBE_2T3E3_PAD_COUNT_3 3 +#define SBE_2T3E3_PAD_COUNT_4 4 + +#define SBE_2T3E3_CHIP_21143 0 +#define SBE_2T3E3_CHIP_CPLD 1 +#define SBE_2T3E3_CHIP_FRAMER 2 +#define SBE_2T3E3_CHIP_LIU 3 + +#define SBE_2T3E3_LOG_LEVEL_NONE 0 +#define SBE_2T3E3_LOG_LEVEL_ERROR 1 +#define SBE_2T3E3_LOG_LEVEL_WARNING 2 +#define SBE_2T3E3_LOG_LEVEL_INFO 3 + +/* commands */ +#define SBE_2T3E3_PORT_GET 0 +#define SBE_2T3E3_PORT_SET 1 +#define SBE_2T3E3_PORT_GET_STATS 2 +#define SBE_2T3E3_PORT_DEL_STATS 3 +#define SBE_2T3E3_PORT_READ_REGS 4 +#define SBE_2T3E3_LOG_LEVEL 5 +#define SBE_2T3E3_PORT_WRITE_REGS 6 + +#define NG_SBE_2T3E3_NODE_TYPE "sbe2T3E3" +#define NG_SBE_2T3E3_COOKIE 0x03800891 + +typedef struct t3e3_param { + u_int8_t frame_mode; /* FRAME_MODE_* */ + u_int8_t crc; /* CRC_* */ + u_int8_t receiver_on; /* ON/OFF */ + u_int8_t transmitter_on; /* ON/OFF */ + u_int8_t frame_type; /* FRAME_TYPE_* */ + u_int8_t panel; /* PANEL_* */ + u_int8_t line_build_out; /* ON/OFF */ + u_int8_t receive_equalization; /* ON/OFF */ + u_int8_t transmit_all_ones; /* ON/OFF */ + u_int8_t loopback; /* LOOPBACK_* */ + u_int8_t clock_source; /* TIMING_* */ + u_int8_t scrambler; /* SCRAMBLER_* */ + u_int8_t pad_count; /* PAD_COUNT_* */ + u_int8_t log_level; /* LOG_LEVEL_* - unused */ + u_int8_t fractional_mode; /* FRACTIONAL_MODE_* */ + u_int8_t bandwidth_start; /* 0-255 */ + u_int8_t bandwidth_stop; /* 0-255 */ +} t3e3_param_t; + +typedef struct t3e3_stats { + u_int64_t in_bytes; + u32 in_packets, in_dropped; + u32 in_errors, in_error_desc, in_error_coll, in_error_drib, + in_error_crc, in_error_mii; + u_int64_t out_bytes; + u32 out_packets, out_dropped; + u32 out_errors, out_error_jab, out_error_lost_carr, + out_error_no_carr, out_error_link_fail, out_error_underflow, + out_error_dereferred; + u_int8_t LOC, LOF, OOF, LOS, AIS, FERF, IDLE, AIC, FEAC; + u_int16_t FEBE_code; + u32 LCV, FRAMING_BIT, PARITY_ERROR, FEBE_count, CP_BIT; +} t3e3_stats_t; + + +typedef struct t3e3_resp { + union { + t3e3_param_t param; + t3e3_stats_t stats; + u32 data; + } u; +} t3e3_resp_t; + +#endif /* CTRL_H */ |
