diff options
Diffstat (limited to 'drivers/staging/rtl8723bs/include/hal_com_reg.h')
-rw-r--r-- | drivers/staging/rtl8723bs/include/hal_com_reg.h | 1725 |
1 files changed, 1725 insertions, 0 deletions
diff --git a/drivers/staging/rtl8723bs/include/hal_com_reg.h b/drivers/staging/rtl8723bs/include/hal_com_reg.h new file mode 100644 index 0000000..fbf33db --- /dev/null +++ b/drivers/staging/rtl8723bs/include/hal_com_reg.h @@ -0,0 +1,1725 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ +#ifndef __HAL_COMMON_REG_H__ +#define __HAL_COMMON_REG_H__ + + +#define MAC_ADDR_LEN 6 + +#define HAL_NAV_UPPER_UNIT 128 /* micro-second */ + +/* 8188E PKT_BUFF_ACCESS_CTRL value */ +#define TXPKT_BUF_SELECT 0x69 +#define RXPKT_BUF_SELECT 0xA5 +#define DISABLE_TRXPKT_BUF_ACCESS 0x0 + +/* */ +/* */ +/* */ + +/* */ +/* */ +/* 0x0000h ~ 0x00FFh System Configuration */ +/* */ +/* */ +#define REG_SYS_ISO_CTRL 0x0000 +#define REG_SYS_FUNC_EN 0x0002 +#define REG_APS_FSMCO 0x0004 +#define REG_SYS_CLKR 0x0008 +#define REG_9346CR 0x000A +#define REG_SYS_EEPROM_CTRL 0x000A +#define REG_EE_VPD 0x000C +#define REG_AFE_MISC 0x0010 +#define REG_SPS0_CTRL 0x0011 +#define REG_SPS0_CTRL_6 0x0016 +#define REG_POWER_OFF_IN_PROCESS 0x0017 +#define REG_SPS_OCP_CFG 0x0018 +#define REG_RSV_CTRL 0x001C +#define REG_RF_CTRL 0x001F +#define REG_LDOA15_CTRL 0x0020 +#define REG_LDOV12D_CTRL 0x0021 +#define REG_LDOHCI12_CTRL 0x0022 +#define REG_LPLDO_CTRL 0x0023 +#define REG_AFE_XTAL_CTRL 0x0024 +#define REG_AFE_LDO_CTRL 0x0027 /* 1.5v for 8188EE test chip, 1.4v for MP chip */ +#define REG_AFE_PLL_CTRL 0x0028 +#define REG_MAC_PHY_CTRL 0x002c /* for 92d, DMDP, SMSP, DMSP contrl */ +#define REG_APE_PLL_CTRL_EXT 0x002c +#define REG_EFUSE_CTRL 0x0030 +#define REG_EFUSE_TEST 0x0034 +#define REG_PWR_DATA 0x0038 +#define REG_CAL_TIMER 0x003C +#define REG_ACLK_MON 0x003E +#define REG_GPIO_MUXCFG 0x0040 +#define REG_GPIO_IO_SEL 0x0042 +#define REG_MAC_PINMUX_CFG 0x0043 +#define REG_GPIO_PIN_CTRL 0x0044 +#define REG_GPIO_INTM 0x0048 +#define REG_LEDCFG0 0x004C +#define REG_LEDCFG1 0x004D +#define REG_LEDCFG2 0x004E +#define REG_LEDCFG3 0x004F +#define REG_FSIMR 0x0050 +#define REG_FSISR 0x0054 +#define REG_HSIMR 0x0058 +#define REG_HSISR 0x005c +#define REG_GPIO_PIN_CTRL_2 0x0060 /* RTL8723 WIFI/BT/GPS Multi-Function GPIO Pin Control. */ +#define REG_GPIO_IO_SEL_2 0x0062 /* RTL8723 WIFI/BT/GPS Multi-Function GPIO Select. */ +#define REG_MULTI_FUNC_CTRL 0x0068 /* RTL8723 WIFI/BT/GPS Multi-Function control source. */ +#define REG_GSSR 0x006c +#define REG_AFE_XTAL_CTRL_EXT 0x0078 /* RTL8188E */ +#define REG_XCK_OUT_CTRL 0x007c /* RTL8188E */ +#define REG_MCUFWDL 0x0080 +#define REG_WOL_EVENT 0x0081 /* RTL8188E */ +#define REG_MCUTSTCFG 0x0084 +#define REG_FDHM0 0x0088 +#define REG_HOST_SUSP_CNT 0x00BC /* RTL8192C Host suspend counter on FPGA platform */ +#define REG_SYSTEM_ON_CTRL 0x00CC /* For 8723AE Reset after S3 */ +#define REG_EFUSE_ACCESS 0x00CF /* Efuse access protection for RTL8723 */ +#define REG_BIST_SCAN 0x00D0 +#define REG_BIST_RPT 0x00D4 +#define REG_BIST_ROM_RPT 0x00D8 +#define REG_USB_SIE_INTF 0x00E0 +#define REG_PCIE_MIO_INTF 0x00E4 +#define REG_PCIE_MIO_INTD 0x00E8 +#define REG_HPON_FSM 0x00EC +#define REG_SYS_CFG 0x00F0 +#define REG_GPIO_OUTSTS 0x00F4 /* For RTL8723 only. */ +#define REG_TYPE_ID 0x00FC + +/* */ +/* 2010/12/29 MH Add for 92D */ +/* */ +#define REG_MAC_PHY_CTRL_NORMAL 0x00f8 + + +/* */ +/* */ +/* 0x0100h ~ 0x01FFh MACTOP General Configuration */ +/* */ +/* */ +#define REG_CR 0x0100 +#define REG_PBP 0x0104 +#define REG_PKT_BUFF_ACCESS_CTRL 0x0106 +#define REG_TRXDMA_CTRL 0x010C +#define REG_TRXFF_BNDY 0x0114 +#define REG_TRXFF_STATUS 0x0118 +#define REG_RXFF_PTR 0x011C +#define REG_HIMR 0x0120 +#define REG_HISR 0x0124 +#define REG_HIMRE 0x0128 +#define REG_HISRE 0x012C +#define REG_CPWM 0x012F +#define REG_FWIMR 0x0130 +#define REG_FWISR 0x0134 +#define REG_FTIMR 0x0138 +#define REG_FTISR 0x013C /* RTL8192C */ +#define REG_PKTBUF_DBG_CTRL 0x0140 +#define REG_RXPKTBUF_CTRL (REG_PKTBUF_DBG_CTRL+2) +#define REG_PKTBUF_DBG_DATA_L 0x0144 +#define REG_PKTBUF_DBG_DATA_H 0x0148 + +#define REG_TC0_CTRL 0x0150 +#define REG_TC1_CTRL 0x0154 +#define REG_TC2_CTRL 0x0158 +#define REG_TC3_CTRL 0x015C +#define REG_TC4_CTRL 0x0160 +#define REG_TCUNIT_BASE 0x0164 +#define REG_MBIST_START 0x0174 +#define REG_MBIST_DONE 0x0178 +#define REG_MBIST_FAIL 0x017C +#define REG_32K_CTRL 0x0194 /* RTL8188E */ +#define REG_C2HEVT_MSG_NORMAL 0x01A0 +#define REG_C2HEVT_CLEAR 0x01AF +#define REG_MCUTST_1 0x01c0 +#define REG_MCUTST_WOWLAN 0x01C7 /* Defined after 8188E series. */ +#define REG_FMETHR 0x01C8 +#define REG_HMETFR 0x01CC +#define REG_HMEBOX_0 0x01D0 +#define REG_HMEBOX_1 0x01D4 +#define REG_HMEBOX_2 0x01D8 +#define REG_HMEBOX_3 0x01DC +#define REG_LLT_INIT 0x01E0 + + +/* */ +/* */ +/* 0x0200h ~ 0x027Fh TXDMA Configuration */ +/* */ +/* */ +#define REG_RQPN 0x0200 +#define REG_FIFOPAGE 0x0204 +#define REG_TDECTRL 0x0208 +#define REG_TXDMA_OFFSET_CHK 0x020C +#define REG_TXDMA_STATUS 0x0210 +#define REG_RQPN_NPQ 0x0214 +#define REG_AUTO_LLT 0x0224 + + +/* */ +/* */ +/* 0x0280h ~ 0x02FFh RXDMA Configuration */ +/* */ +/* */ +#define REG_RXDMA_AGG_PG_TH 0x0280 +#define REG_RXPKT_NUM 0x0284 +#define REG_RXDMA_STATUS 0x0288 + +/* */ +/* */ +/* 0x0300h ~ 0x03FFh PCIe */ +/* */ +/* */ +#define REG_PCIE_CTRL_REG 0x0300 +#define REG_INT_MIG 0x0304 /* Interrupt Migration */ +#define REG_BCNQ_DESA 0x0308 /* TX Beacon Descriptor Address */ +#define REG_HQ_DESA 0x0310 /* TX High Queue Descriptor Address */ +#define REG_MGQ_DESA 0x0318 /* TX Manage Queue Descriptor Address */ +#define REG_VOQ_DESA 0x0320 /* TX VO Queue Descriptor Address */ +#define REG_VIQ_DESA 0x0328 /* TX VI Queue Descriptor Address */ +#define REG_BEQ_DESA 0x0330 /* TX BE Queue Descriptor Address */ +#define REG_BKQ_DESA 0x0338 /* TX BK Queue Descriptor Address */ +#define REG_RX_DESA 0x0340 /* RX Queue Descriptor Address */ +/* sherry added for DBI Read/Write 20091126 */ +#define REG_DBI_WDATA 0x0348 /* Backdoor REG for Access Configuration */ +#define REG_DBI_RDATA 0x034C /* Backdoor REG for Access Configuration */ +#define REG_DBI_CTRL 0x0350 /* Backdoor REG for Access Configuration */ +#define REG_DBI_FLAG 0x0352 /* Backdoor REG for Access Configuration */ +#define REG_MDIO 0x0354 /* MDIO for Access PCIE PHY */ +#define REG_DBG_SEL 0x0360 /* Debug Selection Register */ +#define REG_PCIE_HRPWM 0x0361 /* PCIe RPWM */ +#define REG_PCIE_HCPWM 0x0363 /* PCIe CPWM */ +#define REG_WATCH_DOG 0x0368 + +/* RTL8723 series ------------------------------- */ +#define REG_PCIE_HISR_EN 0x0394 /* PCIE Local Interrupt Enable Register */ +#define REG_PCIE_HISR 0x03A0 +#define REG_PCIE_HISRE 0x03A4 +#define REG_PCIE_HIMR 0x03A8 +#define REG_PCIE_HIMRE 0x03AC + +#define REG_USB_HIMR 0xFE38 +#define REG_USB_HIMRE 0xFE3C +#define REG_USB_HISR 0xFE78 +#define REG_USB_HISRE 0xFE7C + + +/* */ +/* */ +/* 0x0400h ~ 0x047Fh Protocol Configuration */ +/* */ +/* */ +#define REG_VOQ_INFORMATION 0x0400 +#define REG_VIQ_INFORMATION 0x0404 +#define REG_BEQ_INFORMATION 0x0408 +#define REG_BKQ_INFORMATION 0x040C +#define REG_MGQ_INFORMATION 0x0410 +#define REG_HGQ_INFORMATION 0x0414 +#define REG_BCNQ_INFORMATION 0x0418 +#define REG_TXPKT_EMPTY 0x041A +#define REG_CPU_MGQ_INFORMATION 0x041C +#define REG_FWHW_TXQ_CTRL 0x0420 +#define REG_HWSEQ_CTRL 0x0423 +#define REG_BCNQ_BDNY 0x0424 +#define REG_MGQ_BDNY 0x0425 +#define REG_LIFETIME_CTRL 0x0426 +#define REG_MULTI_BCNQ_OFFSET 0x0427 +#define REG_SPEC_SIFS 0x0428 +#define REG_RL 0x042A +#define REG_DARFRC 0x0430 +#define REG_RARFRC 0x0438 +#define REG_RRSR 0x0440 +#define REG_ARFR0 0x0444 +#define REG_ARFR1 0x0448 +#define REG_ARFR2 0x044C +#define REG_ARFR3 0x0450 +#define REG_BCNQ1_BDNY 0x0457 + +#define REG_AGGLEN_LMT 0x0458 +#define REG_AMPDU_MIN_SPACE 0x045C +#define REG_WMAC_LBK_BF_HD 0x045D +#define REG_FAST_EDCA_CTRL 0x0460 +#define REG_RD_RESP_PKT_TH 0x0463 + +#define REG_INIRTS_RATE_SEL 0x0480 +#define REG_INIDATA_RATE_SEL 0x0484 + +#define REG_POWER_STAGE1 0x04B4 +#define REG_POWER_STAGE2 0x04B8 +#define REG_PKT_VO_VI_LIFE_TIME 0x04C0 +#define REG_PKT_BE_BK_LIFE_TIME 0x04C2 +#define REG_STBC_SETTING 0x04C4 +#define REG_QUEUE_CTRL 0x04C6 +#define REG_SINGLE_AMPDU_CTRL 0x04c7 +#define REG_PROT_MODE_CTRL 0x04C8 +#define REG_MAX_AGGR_NUM 0x04CA +#define REG_RTS_MAX_AGGR_NUM 0x04CB +#define REG_BAR_MODE_CTRL 0x04CC +#define REG_RA_TRY_RATE_AGG_LMT 0x04CF +#define REG_EARLY_MODE_CONTROL 0x04D0 +#define REG_MACID_SLEEP 0x04D4 +#define REG_NQOS_SEQ 0x04DC +#define REG_QOS_SEQ 0x04DE +#define REG_NEED_CPU_HANDLE 0x04E0 +#define REG_PKT_LOSE_RPT 0x04E1 +#define REG_PTCL_ERR_STATUS 0x04E2 +#define REG_TX_RPT_CTRL 0x04EC +#define REG_TX_RPT_TIME 0x04F0 /* 2 byte */ +#define REG_DUMMY 0x04FC + +/* */ +/* */ +/* 0x0500h ~ 0x05FFh EDCA Configuration */ +/* */ +/* */ +#define REG_EDCA_VO_PARAM 0x0500 +#define REG_EDCA_VI_PARAM 0x0504 +#define REG_EDCA_BE_PARAM 0x0508 +#define REG_EDCA_BK_PARAM 0x050C +#define REG_BCNTCFG 0x0510 +#define REG_PIFS 0x0512 +#define REG_RDG_PIFS 0x0513 +#define REG_SIFS_CTX 0x0514 +#define REG_SIFS_TRX 0x0516 +#define REG_TSFTR_SYN_OFFSET 0x0518 +#define REG_AGGR_BREAK_TIME 0x051A +#define REG_SLOT 0x051B +#define REG_TX_PTCL_CTRL 0x0520 +#define REG_TXPAUSE 0x0522 +#define REG_DIS_TXREQ_CLR 0x0523 +#define REG_RD_CTRL 0x0524 +/* */ +/* Format for offset 540h-542h: */ +/* [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting beacon content before TBTT. */ +/* [7:4]: Reserved. */ +/* [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding to send the beacon packet. */ +/* [23:20]: Reserved */ +/* Description: */ +/* | */ +/* |<--Setup--|--Hold------------>| */ +/* --------------|---------------------- */ +/* | */ +/* TBTT */ +/* Note: We cannot update beacon content to HW or send any AC packets during the time between Setup and Hold. */ +/* Described by Designer Tim and Bruce, 2011-01-14. */ +/* */ +#define REG_TBTT_PROHIBIT 0x0540 +#define REG_RD_NAV_NXT 0x0544 +#define REG_NAV_PROT_LEN 0x0546 +#define REG_BCN_CTRL 0x0550 +#define REG_BCN_CTRL_1 0x0551 +#define REG_MBID_NUM 0x0552 +#define REG_DUAL_TSF_RST 0x0553 +#define REG_BCN_INTERVAL 0x0554 /* The same as REG_MBSSID_BCN_SPACE */ +#define REG_DRVERLYINT 0x0558 +#define REG_BCNDMATIM 0x0559 +#define REG_ATIMWND 0x055A +#define REG_USTIME_TSF 0x055C +#define REG_BCN_MAX_ERR 0x055D +#define REG_RXTSF_OFFSET_CCK 0x055E +#define REG_RXTSF_OFFSET_OFDM 0x055F +#define REG_TSFTR 0x0560 +#define REG_TSFTR1 0x0568 /* HW Port 1 TSF Register */ +#define REG_ATIMWND_1 0x0570 +#define REG_P2P_CTWIN 0x0572 /* 1 Byte long (in unit of TU) */ +#define REG_PSTIMER 0x0580 +#define REG_TIMER0 0x0584 +#define REG_TIMER1 0x0588 +#define REG_ACMHWCTRL 0x05C0 +#define REG_NOA_DESC_SEL 0x05CF +#define REG_NOA_DESC_DURATION 0x05E0 +#define REG_NOA_DESC_INTERVAL 0x05E4 +#define REG_NOA_DESC_START 0x05E8 +#define REG_NOA_DESC_COUNT 0x05EC + +#define REG_DMC 0x05F0 /* Dual MAC Co-Existence Register */ +#define REG_SCH_TX_CMD 0x05F8 + +#define REG_FW_RESET_TSF_CNT_1 0x05FC +#define REG_FW_RESET_TSF_CNT_0 0x05FD +#define REG_FW_BCN_DIS_CNT 0x05FE + +/* */ +/* */ +/* 0x0600h ~ 0x07FFh WMAC Configuration */ +/* */ +/* */ +#define REG_APSD_CTRL 0x0600 +#define REG_BWOPMODE 0x0603 +#define REG_TCR 0x0604 +#define REG_RCR 0x0608 +#define REG_RX_PKT_LIMIT 0x060C +#define REG_RX_DLK_TIME 0x060D +#define REG_RX_DRVINFO_SZ 0x060F + +#define REG_MACID 0x0610 +#define REG_BSSID 0x0618 +#define REG_MAR 0x0620 +#define REG_MBIDCAMCFG 0x0628 + +#define REG_PNO_STATUS 0x0631 +#define REG_USTIME_EDCA 0x0638 +#define REG_MAC_SPEC_SIFS 0x063A +/* 20100719 Joseph: Hardware register definition change. (HW datasheet v54) */ +#define REG_RESP_SIFS_CCK 0x063C /* [15:8]SIFS_R2T_OFDM, [7:0]SIFS_R2T_CCK */ +#define REG_RESP_SIFS_OFDM 0x063E /* [15:8]SIFS_T2T_OFDM, [7:0]SIFS_T2T_CCK */ + +#define REG_ACKTO 0x0640 +#define REG_CTS2TO 0x0641 +#define REG_EIFS 0x0642 + + +/* RXERR_RPT */ +#define RXERR_TYPE_OFDM_PPDU 0 +#define RXERR_TYPE_OFDMfalse_ALARM 1 +#define RXERR_TYPE_OFDM_MPDU_OK 2 +#define RXERR_TYPE_OFDM_MPDU_FAIL 3 +#define RXERR_TYPE_CCK_PPDU 4 +#define RXERR_TYPE_CCKfalse_ALARM 5 +#define RXERR_TYPE_CCK_MPDU_OK 6 +#define RXERR_TYPE_CCK_MPDU_FAIL 7 +#define RXERR_TYPE_HT_PPDU 8 +#define RXERR_TYPE_HTfalse_ALARM 9 +#define RXERR_TYPE_HT_MPDU_TOTAL 10 +#define RXERR_TYPE_HT_MPDU_OK 11 +#define RXERR_TYPE_HT_MPDU_FAIL 12 +#define RXERR_TYPE_RX_FULL_DROP 15 + +#define RXERR_COUNTER_MASK 0xFFFFF +#define RXERR_RPT_RST BIT(27) +#define _RXERR_RPT_SEL(type) ((type) << 28) + +/* */ +/* Note: */ +/* The NAV upper value is very important to WiFi 11n 5.2.3 NAV test. The default value is */ +/* always too small, but the WiFi TestPlan test by 25, 000 microseconds of NAV through sending */ +/* CTS in the air. We must update this value greater than 25, 000 microseconds to pass the item. */ +/* The offset of NAV_UPPER in 8192C Spec is incorrect, and the offset should be 0x0652. Commented */ +/* by SD1 Scott. */ +/* By Bruce, 2011-07-18. */ +/* */ +#define REG_NAV_UPPER 0x0652 /* unit of 128 */ + +/* WMA, BA, CCX */ +#define REG_NAV_CTRL 0x0650 +#define REG_BACAMCMD 0x0654 +#define REG_BACAMCONTENT 0x0658 +#define REG_LBDLY 0x0660 +#define REG_FWDLY 0x0661 +#define REG_RXERR_RPT 0x0664 +#define REG_WMAC_TRXPTCL_CTL 0x0668 + +/* Security */ +#define REG_CAMCMD 0x0670 +#define REG_CAMWRITE 0x0674 +#define REG_CAMREAD 0x0678 +#define REG_CAMDBG 0x067C +#define REG_SECCFG 0x0680 + +/* Power */ +#define REG_WOW_CTRL 0x0690 +#define REG_PS_RX_INFO 0x0692 +#define REG_UAPSD_TID 0x0693 +#define REG_WKFMCAM_CMD 0x0698 +#define REG_WKFMCAM_NUM REG_WKFMCAM_CMD +#define REG_WKFMCAM_RWD 0x069C +#define REG_RXFLTMAP0 0x06A0 +#define REG_RXFLTMAP1 0x06A2 +#define REG_RXFLTMAP2 0x06A4 +#define REG_BCN_PSR_RPT 0x06A8 +#define REG_BT_COEX_TABLE 0x06C0 + +/* Hardware Port 2 */ +#define REG_MACID1 0x0700 +#define REG_BSSID1 0x0708 + + +/* */ +/* */ +/* 0xFE00h ~ 0xFE55h USB Configuration */ +/* */ +/* */ +#define REG_USB_INFO 0xFE17 +#define REG_USB_SPECIAL_OPTION 0xFE55 +#define REG_USB_DMA_AGG_TO 0xFE5B +#define REG_USB_AGG_TO 0xFE5C +#define REG_USB_AGG_TH 0xFE5D + +#define REG_USB_HRPWM 0xFE58 +#define REG_USB_HCPWM 0xFE57 + +/* for 92DU high_Queue low_Queue Normal_Queue select */ +#define REG_USB_High_NORMAL_Queue_Select_MAC0 0xFE44 +/* define REG_USB_LOW_Queue_Select_MAC0 0xFE45 */ +#define REG_USB_High_NORMAL_Queue_Select_MAC1 0xFE47 +/* define REG_USB_LOW_Queue_Select_MAC1 0xFE48 */ + +/* For test chip */ +#define REG_TEST_USB_TXQS 0xFE48 +#define REG_TEST_SIE_VID 0xFE60 /* 0xFE60~0xFE61 */ +#define REG_TEST_SIE_PID 0xFE62 /* 0xFE62~0xFE63 */ +#define REG_TEST_SIE_OPTIONAL 0xFE64 +#define REG_TEST_SIE_CHIRP_K 0xFE65 +#define REG_TEST_SIE_PHY 0xFE66 /* 0xFE66~0xFE6B */ +#define REG_TEST_SIE_MAC_ADDR 0xFE70 /* 0xFE70~0xFE75 */ +#define REG_TEST_SIE_STRING 0xFE80 /* 0xFE80~0xFEB9 */ + + +/* For normal chip */ +#define REG_NORMAL_SIE_VID 0xFE60 /* 0xFE60~0xFE61 */ +#define REG_NORMAL_SIE_PID 0xFE62 /* 0xFE62~0xFE63 */ +#define REG_NORMAL_SIE_OPTIONAL 0xFE64 +#define REG_NORMAL_SIE_EP 0xFE65 /* 0xFE65~0xFE67 */ +#define REG_NORMAL_SIE_PHY 0xFE68 /* 0xFE68~0xFE6B */ +#define REG_NORMAL_SIE_OPTIONAL2 0xFE6C +#define REG_NORMAL_SIE_GPS_EP 0xFE6D /* 0xFE6D, for RTL8723 only. */ +#define REG_NORMAL_SIE_MAC_ADDR 0xFE70 /* 0xFE70~0xFE75 */ +#define REG_NORMAL_SIE_STRING 0xFE80 /* 0xFE80~0xFEDF */ + + +/* */ +/* */ +/* Redifine 8192C register definition for compatibility */ +/* */ +/* */ + +/* TODO: use these definition when using REG_xxx naming rule. */ +/* NOTE: DO NOT Remove these definition. Use later. */ + +#define EFUSE_CTRL REG_EFUSE_CTRL /* E-Fuse Control. */ +#define EFUSE_TEST REG_EFUSE_TEST /* E-Fuse Test. */ +#define MSR (REG_CR + 2) /* Media Status register */ +/* define ISR REG_HISR */ + +#define TSFR REG_TSFTR /* Timing Sync Function Timer Register. */ +#define TSFR1 REG_TSFTR1 /* HW Port 1 TSF Register */ + +#define PBP REG_PBP + +/* Redifine MACID register, to compatible prior ICs. */ +#define IDR0 REG_MACID /* MAC ID Register, Offset 0x0050-0x0053 */ +#define IDR4 (REG_MACID + 4) /* MAC ID Register, Offset 0x0054-0x0055 */ + + +/* */ +/* 9. Security Control Registers (Offset:) */ +/* */ +#define RWCAM REG_CAMCMD /* IN 8190 Data Sheet is called CAMcmd */ +#define WCAMI REG_CAMWRITE /* Software write CAM input content */ +#define RCAMO REG_CAMREAD /* Software read/write CAM config */ +#define CAMDBG REG_CAMDBG +#define SECR REG_SECCFG /* Security Configuration Register */ + +/* Unused register */ +#define UnusedRegister 0x1BF +#define DCAM UnusedRegister +#define PSR UnusedRegister +#define BBAddr UnusedRegister +#define PhyDataR UnusedRegister + +/* Min Spacing related settings. */ +#define MAX_MSS_DENSITY_2T 0x13 +#define MAX_MSS_DENSITY_1T 0x0A + +/* */ +/* 8192C Cmd9346CR bits (Offset 0xA, 16bit) */ +/* */ +#define CmdEEPROM_En BIT5 /* EEPROM enable when set 1 */ +#define CmdEERPOMSEL BIT4 /* System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 */ +#define Cmd9346CR_9356SEL BIT4 + +/* */ +/* 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) */ +/* */ +#define GPIOSEL_GPIO 0 +#define GPIOSEL_ENBT BIT5 + +/* */ +/* 8192C GPIO PIN Control Register (offset 0x44, 4 byte) */ +/* */ +#define GPIO_IN REG_GPIO_PIN_CTRL /* GPIO pins input value */ +#define GPIO_OUT (REG_GPIO_PIN_CTRL+1) /* GPIO pins output value */ +#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) /* GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. */ +#define GPIO_MOD (REG_GPIO_PIN_CTRL+3) + +/* */ +/* 8811A GPIO PIN Control Register (offset 0x60, 4 byte) */ +/* */ +#define GPIO_IN_8811A REG_GPIO_PIN_CTRL_2 /* GPIO pins input value */ +#define GPIO_OUT_8811A (REG_GPIO_PIN_CTRL_2+1) /* GPIO pins output value */ +#define GPIO_IO_SEL_8811A (REG_GPIO_PIN_CTRL_2+2) /* GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. */ +#define GPIO_MOD_8811A (REG_GPIO_PIN_CTRL_2+3) + +/* */ +/* 8723/8188E Host System Interrupt Mask Register (offset 0x58, 32 byte) */ +/* */ +#define HSIMR_GPIO12_0_INT_EN BIT0 +#define HSIMR_SPS_OCP_INT_EN BIT5 +#define HSIMR_RON_INT_EN BIT6 +#define HSIMR_PDN_INT_EN BIT7 +#define HSIMR_GPIO9_INT_EN BIT25 + +/* */ +/* 8723/8188E Host System Interrupt Status Register (offset 0x5C, 32 byte) */ +/* */ +#define HSISR_GPIO12_0_INT BIT0 +#define HSISR_SPS_OCP_INT BIT5 +#define HSISR_RON_INT BIT6 +#define HSISR_PDNINT BIT7 +#define HSISR_GPIO9_INT BIT25 + +/* */ +/* 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) */ +/* */ +/* +Network Type +00: No link +01: Link in ad hoc network +10: Link in infrastructure network +11: AP mode +Default: 00b. +*/ +#define MSR_NOLINK 0x00 +#define MSR_ADHOC 0x01 +#define MSR_INFRA 0x02 +#define MSR_AP 0x03 + +/* */ +/* USB INTR CONTENT */ +/* */ +#define USB_C2H_CMDID_OFFSET 0 +#define USB_C2H_SEQ_OFFSET 1 +#define USB_C2H_EVENT_OFFSET 2 +#define USB_INTR_CPWM_OFFSET 16 +#define USB_INTR_CONTENT_C2H_OFFSET 0 +#define USB_INTR_CONTENT_CPWM1_OFFSET 16 +#define USB_INTR_CONTENT_CPWM2_OFFSET 20 +#define USB_INTR_CONTENT_HISR_OFFSET 48 +#define USB_INTR_CONTENT_HISRE_OFFSET 52 +#define USB_INTR_CONTENT_LENGTH 56 + +/* */ +/* Response Rate Set Register (offset 0x440, 24bits) */ +/* */ +#define RRSR_1M BIT0 +#define RRSR_2M BIT1 +#define RRSR_5_5M BIT2 +#define RRSR_11M BIT3 +#define RRSR_6M BIT4 +#define RRSR_9M BIT5 +#define RRSR_12M BIT6 +#define RRSR_18M BIT7 +#define RRSR_24M BIT8 +#define RRSR_36M BIT9 +#define RRSR_48M BIT10 +#define RRSR_54M BIT11 +#define RRSR_MCS0 BIT12 +#define RRSR_MCS1 BIT13 +#define RRSR_MCS2 BIT14 +#define RRSR_MCS3 BIT15 +#define RRSR_MCS4 BIT16 +#define RRSR_MCS5 BIT17 +#define RRSR_MCS6 BIT18 +#define RRSR_MCS7 BIT19 + +#define RRSR_CCK_RATES (RRSR_11M|RRSR_5_5M|RRSR_2M|RRSR_1M) +#define RRSR_OFDM_RATES (RRSR_54M|RRSR_48M|RRSR_36M|RRSR_24M|RRSR_18M|RRSR_12M|RRSR_9M|RRSR_6M) + +/* WOL bit information */ +#define HAL92C_WOL_PTK_UPDATE_EVENT BIT0 +#define HAL92C_WOL_GTK_UPDATE_EVENT BIT1 +#define HAL92C_WOL_DISASSOC_EVENT BIT2 +#define HAL92C_WOL_DEAUTH_EVENT BIT3 +#define HAL92C_WOL_FW_DISCONNECT_EVENT BIT4 + +/* */ +/* Rate Definition */ +/* */ +/* CCK */ +#define RATR_1M 0x00000001 +#define RATR_2M 0x00000002 +#define RATR_55M 0x00000004 +#define RATR_11M 0x00000008 +/* OFDM */ +#define RATR_6M 0x00000010 +#define RATR_9M 0x00000020 +#define RATR_12M 0x00000040 +#define RATR_18M 0x00000080 +#define RATR_24M 0x00000100 +#define RATR_36M 0x00000200 +#define RATR_48M 0x00000400 +#define RATR_54M 0x00000800 +/* MCS 1 Spatial Stream */ +#define RATR_MCS0 0x00001000 +#define RATR_MCS1 0x00002000 +#define RATR_MCS2 0x00004000 +#define RATR_MCS3 0x00008000 +#define RATR_MCS4 0x00010000 +#define RATR_MCS5 0x00020000 +#define RATR_MCS6 0x00040000 +#define RATR_MCS7 0x00080000 +/* MCS 2 Spatial Stream */ +#define RATR_MCS8 0x00100000 +#define RATR_MCS9 0x00200000 +#define RATR_MCS10 0x00400000 +#define RATR_MCS11 0x00800000 +#define RATR_MCS12 0x01000000 +#define RATR_MCS13 0x02000000 +#define RATR_MCS14 0x04000000 +#define RATR_MCS15 0x08000000 + +/* CCK */ +#define RATE_1M BIT(0) +#define RATE_2M BIT(1) +#define RATE_5_5M BIT(2) +#define RATE_11M BIT(3) +/* OFDM */ +#define RATE_6M BIT(4) +#define RATE_9M BIT(5) +#define RATE_12M BIT(6) +#define RATE_18M BIT(7) +#define RATE_24M BIT(8) +#define RATE_36M BIT(9) +#define RATE_48M BIT(10) +#define RATE_54M BIT(11) +/* MCS 1 Spatial Stream */ +#define RATE_MCS0 BIT(12) +#define RATE_MCS1 BIT(13) +#define RATE_MCS2 BIT(14) +#define RATE_MCS3 BIT(15) +#define RATE_MCS4 BIT(16) +#define RATE_MCS5 BIT(17) +#define RATE_MCS6 BIT(18) +#define RATE_MCS7 BIT(19) +/* MCS 2 Spatial Stream */ +#define RATE_MCS8 BIT(20) +#define RATE_MCS9 BIT(21) +#define RATE_MCS10 BIT(22) +#define RATE_MCS11 BIT(23) +#define RATE_MCS12 BIT(24) +#define RATE_MCS13 BIT(25) +#define RATE_MCS14 BIT(26) +#define RATE_MCS15 BIT(27) + + +/* ALL CCK Rate */ +#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M +#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|\ + RATR_36M|RATR_48M|RATR_54M +#define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 |\ + RATR_MCS4|RATR_MCS5|RATR_MCS6 |RATR_MCS7 +#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11|\ + RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15 + +#define RATE_BITMAP_ALL 0xFFFFF + +/* Only use CCK 1M rate for ACK */ +#define RATE_RRSR_CCK_ONLY_1M 0xFFFF1 +#define RATE_RRSR_WITHOUT_CCK 0xFFFF0 + +/* */ +/* BW_OPMODE bits (Offset 0x603, 8bit) */ +/* */ +#define BW_OPMODE_20MHZ BIT2 +#define BW_OPMODE_5G BIT1 + +/* */ +/* CAM Config Setting (offset 0x680, 1 byte) */ +/* */ +#define CAM_VALID BIT15 +#define CAM_NOTVALID 0x0000 +#define CAM_USEDK BIT5 + +#define CAM_CONTENT_COUNT 8 + +#define CAM_NONE 0x0 +#define CAM_WEP40 0x01 +#define CAM_TKIP 0x02 +#define CAM_AES 0x04 +#define CAM_WEP104 0x05 +#define CAM_SMS4 0x6 + +#define TOTAL_CAM_ENTRY 32 +#define HALF_CAM_ENTRY 16 + +#define CAM_CONFIG_USEDK true +#define CAM_CONFIG_NO_USEDK false + +#define CAM_WRITE BIT16 +#define CAM_READ 0x00000000 +#define CAM_POLLINIG BIT31 + +/* */ +/* 10. Power Save Control Registers */ +/* */ +#define WOW_PMEN BIT0 /* Power management Enable. */ +#define WOW_WOMEN BIT1 /* WoW function on or off. */ +#define WOW_MAGIC BIT2 /* Magic packet */ +#define WOW_UWF BIT3 /* Unicast Wakeup frame. */ + +/* */ +/* 12. Host Interrupt Status Registers */ +/* */ +/* */ +/* 8190 IMR/ISR bits */ +/* */ +#define IMR8190_DISABLED 0x0 +#define IMR_DISABLED 0x0 +/* IMR DW0 Bit 0-31 */ +#define IMR_BCNDMAINT6 BIT31 /* Beacon DMA Interrupt 6 */ +#define IMR_BCNDMAINT5 BIT30 /* Beacon DMA Interrupt 5 */ +#define IMR_BCNDMAINT4 BIT29 /* Beacon DMA Interrupt 4 */ +#define IMR_BCNDMAINT3 BIT28 /* Beacon DMA Interrupt 3 */ +#define IMR_BCNDMAINT2 BIT27 /* Beacon DMA Interrupt 2 */ +#define IMR_BCNDMAINT1 BIT26 /* Beacon DMA Interrupt 1 */ +#define IMR_BCNDOK8 BIT25 /* Beacon Queue DMA OK Interrup 8 */ +#define IMR_BCNDOK7 BIT24 /* Beacon Queue DMA OK Interrup 7 */ +#define IMR_BCNDOK6 BIT23 /* Beacon Queue DMA OK Interrup 6 */ +#define IMR_BCNDOK5 BIT22 /* Beacon Queue DMA OK Interrup 5 */ +#define IMR_BCNDOK4 BIT21 /* Beacon Queue DMA OK Interrup 4 */ +#define IMR_BCNDOK3 BIT20 /* Beacon Queue DMA OK Interrup 3 */ +#define IMR_BCNDOK2 BIT19 /* Beacon Queue DMA OK Interrup 2 */ +#define IMR_BCNDOK1 BIT18 /* Beacon Queue DMA OK Interrup 1 */ +#define IMR_TIMEOUT2 BIT17 /* Timeout interrupt 2 */ +#define IMR_TIMEOUT1 BIT16 /* Timeout interrupt 1 */ +#define IMR_TXFOVW BIT15 /* Transmit FIFO Overflow */ +#define IMR_PSTIMEOUT BIT14 /* Power save time out interrupt */ +#define IMR_BcnInt BIT13 /* Beacon DMA Interrupt 0 */ +#define IMR_RXFOVW BIT12 /* Receive FIFO Overflow */ +#define IMR_RDU BIT11 /* Receive Descriptor Unavailable */ +#define IMR_ATIMEND BIT10 /* For 92C, ATIM Window End Interrupt. For 8723 and later ICs, it also means P2P CTWin End interrupt. */ +#define IMR_BDOK BIT9 /* Beacon Queue DMA OK Interrup */ +#define IMR_HIGHDOK BIT8 /* High Queue DMA OK Interrupt */ +#define IMR_TBDOK BIT7 /* Transmit Beacon OK interrup */ +#define IMR_MGNTDOK BIT6 /* Management Queue DMA OK Interrupt */ +#define IMR_TBDER BIT5 /* For 92C, Transmit Beacon Error Interrupt */ +#define IMR_BKDOK BIT4 /* AC_BK DMA OK Interrupt */ +#define IMR_BEDOK BIT3 /* AC_BE DMA OK Interrupt */ +#define IMR_VIDOK BIT2 /* AC_VI DMA OK Interrupt */ +#define IMR_VODOK BIT1 /* AC_VO DMA Interrupt */ +#define IMR_ROK BIT0 /* Receive DMA OK Interrupt */ + +/* 13. Host Interrupt Status Extension Register (Offset: 0x012C-012Eh) */ +#define IMR_TSF_BIT32_TOGGLE BIT15 +#define IMR_BcnInt_E BIT12 +#define IMR_TXERR BIT11 +#define IMR_RXERR BIT10 +#define IMR_C2HCMD BIT9 +#define IMR_CPWM BIT8 +/* RSVD [2-7] */ +#define IMR_OCPINT BIT1 +#define IMR_WLANOFF BIT0 + +/* */ +/* 8723E series PCIE Host IMR/ISR bit */ +/* */ +/* IMR DW0 Bit 0-31 */ +#define PHIMR_TIMEOUT2 BIT31 +#define PHIMR_TIMEOUT1 BIT30 +#define PHIMR_PSTIMEOUT BIT29 +#define PHIMR_GTINT4 BIT28 +#define PHIMR_GTINT3 BIT27 +#define PHIMR_TXBCNERR BIT26 +#define PHIMR_TXBCNOK BIT25 +#define PHIMR_TSF_BIT32_TOGGLE BIT24 +#define PHIMR_BCNDMAINT3 BIT23 +#define PHIMR_BCNDMAINT2 BIT22 +#define PHIMR_BCNDMAINT1 BIT21 +#define PHIMR_BCNDMAINT0 BIT20 +#define PHIMR_BCNDOK3 BIT19 +#define PHIMR_BCNDOK2 BIT18 +#define PHIMR_BCNDOK1 BIT17 +#define PHIMR_BCNDOK0 BIT16 +#define PHIMR_HSISR_IND_ON BIT15 +#define PHIMR_BCNDMAINT_E BIT14 +#define PHIMR_ATIMEND_E BIT13 +#define PHIMR_ATIM_CTW_END BIT12 +#define PHIMR_HISRE_IND BIT11 /* RO. HISRE Indicator (HISRE & HIMRE is true, this bit is set to 1) */ +#define PHIMR_C2HCMD BIT10 +#define PHIMR_CPWM2 BIT9 +#define PHIMR_CPWM BIT8 +#define PHIMR_HIGHDOK BIT7 /* High Queue DMA OK Interrupt */ +#define PHIMR_MGNTDOK BIT6 /* Management Queue DMA OK Interrupt */ +#define PHIMR_BKDOK BIT5 /* AC_BK DMA OK Interrupt */ +#define PHIMR_BEDOK BIT4 /* AC_BE DMA OK Interrupt */ +#define PHIMR_VIDOK BIT3 /* AC_VI DMA OK Interrupt */ +#define PHIMR_VODOK BIT2 /* AC_VO DMA Interrupt */ +#define PHIMR_RDU BIT1 /* Receive Descriptor Unavailable */ +#define PHIMR_ROK BIT0 /* Receive DMA OK Interrupt */ + +/* PCIE Host Interrupt Status Extension bit */ +#define PHIMR_BCNDMAINT7 BIT23 +#define PHIMR_BCNDMAINT6 BIT22 +#define PHIMR_BCNDMAINT5 BIT21 +#define PHIMR_BCNDMAINT4 BIT20 +#define PHIMR_BCNDOK7 BIT19 +#define PHIMR_BCNDOK6 BIT18 +#define PHIMR_BCNDOK5 BIT17 +#define PHIMR_BCNDOK4 BIT16 +/* bit12 15: RSVD */ +#define PHIMR_TXERR BIT11 +#define PHIMR_RXERR BIT10 +#define PHIMR_TXFOVW BIT9 +#define PHIMR_RXFOVW BIT8 +/* bit2-7: RSVD */ +#define PHIMR_OCPINT BIT1 +/* bit0: RSVD */ + +#define UHIMR_TIMEOUT2 BIT31 +#define UHIMR_TIMEOUT1 BIT30 +#define UHIMR_PSTIMEOUT BIT29 +#define UHIMR_GTINT4 BIT28 +#define UHIMR_GTINT3 BIT27 +#define UHIMR_TXBCNERR BIT26 +#define UHIMR_TXBCNOK BIT25 +#define UHIMR_TSF_BIT32_TOGGLE BIT24 +#define UHIMR_BCNDMAINT3 BIT23 +#define UHIMR_BCNDMAINT2 BIT22 +#define UHIMR_BCNDMAINT1 BIT21 +#define UHIMR_BCNDMAINT0 BIT20 +#define UHIMR_BCNDOK3 BIT19 +#define UHIMR_BCNDOK2 BIT18 +#define UHIMR_BCNDOK1 BIT17 +#define UHIMR_BCNDOK0 BIT16 +#define UHIMR_HSISR_IND BIT15 +#define UHIMR_BCNDMAINT_E BIT14 +/* RSVD BIT13 */ +#define UHIMR_CTW_END BIT12 +/* RSVD BIT11 */ +#define UHIMR_C2HCMD BIT10 +#define UHIMR_CPWM2 BIT9 +#define UHIMR_CPWM BIT8 +#define UHIMR_HIGHDOK BIT7 /* High Queue DMA OK Interrupt */ +#define UHIMR_MGNTDOK BIT6 /* Management Queue DMA OK Interrupt */ +#define UHIMR_BKDOK BIT5 /* AC_BK DMA OK Interrupt */ +#define UHIMR_BEDOK BIT4 /* AC_BE DMA OK Interrupt */ +#define UHIMR_VIDOK BIT3 /* AC_VI DMA OK Interrupt */ +#define UHIMR_VODOK BIT2 /* AC_VO DMA Interrupt */ +#define UHIMR_RDU BIT1 /* Receive Descriptor Unavailable */ +#define UHIMR_ROK BIT0 /* Receive DMA OK Interrupt */ + +/* USB Host Interrupt Status Extension bit */ +#define UHIMR_BCNDMAINT7 BIT23 +#define UHIMR_BCNDMAINT6 BIT22 +#define UHIMR_BCNDMAINT5 BIT21 +#define UHIMR_BCNDMAINT4 BIT20 +#define UHIMR_BCNDOK7 BIT19 +#define UHIMR_BCNDOK6 BIT18 +#define UHIMR_BCNDOK5 BIT17 +#define UHIMR_BCNDOK4 BIT16 +/* bit14-15: RSVD */ +#define UHIMR_ATIMEND_E BIT13 +#define UHIMR_ATIMEND BIT12 +#define UHIMR_TXERR BIT11 +#define UHIMR_RXERR BIT10 +#define UHIMR_TXFOVW BIT9 +#define UHIMR_RXFOVW BIT8 +/* bit2-7: RSVD */ +#define UHIMR_OCPINT BIT1 +/* bit0: RSVD */ + + +#define HAL_NIC_UNPLUG_ISR 0xFFFFFFFF /* The value when the NIC is unplugged for PCI. */ +#define HAL_NIC_UNPLUG_PCI_ISR 0xEAEAEAEA /* The value when the NIC is unplugged for PCI in PCI interrupt (page 3). */ + +/* */ +/* 8188 IMR/ISR bits */ +/* */ +#define IMR_DISABLED_88E 0x0 +/* IMR DW0(0x0060-0063) Bit 0-31 */ +#define IMR_TXCCK_88E BIT30 /* TXRPT interrupt when CCX bit of the packet is set */ +#define IMR_PSTIMEOUT_88E BIT29 /* Power Save Time Out Interrupt */ +#define IMR_GTINT4_88E BIT28 /* When GTIMER4 expires, this bit is set to 1 */ +#define IMR_GTINT3_88E BIT27 /* When GTIMER3 expires, this bit is set to 1 */ +#define IMR_TBDER_88E BIT26 /* Transmit Beacon0 Error */ +#define IMR_TBDOK_88E BIT25 /* Transmit Beacon0 OK */ +#define IMR_TSF_BIT32_TOGGLE_88E BIT24 /* TSF Timer BIT32 toggle indication interrupt */ +#define IMR_BCNDMAINT0_88E BIT20 /* Beacon DMA Interrupt 0 */ +#define IMR_BCNDERR0_88E BIT16 /* Beacon Queue DMA Error 0 */ +#define IMR_HSISR_IND_ON_INT_88E BIT15 /* HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) */ +#define IMR_BCNDMAINT_E_88E BIT14 /* Beacon DMA Interrupt Extension for Win7 */ +#define IMR_ATIMEND_88E BIT12 /* CTWidnow End or ATIM Window End */ +#define IMR_HISR1_IND_INT_88E BIT11 /* HISR1 Indicator (HISR1 & HIMR1 is true, this bit is set to 1) */ +#define IMR_C2HCMD_88E BIT10 /* CPU to Host Command INT Status, Write 1 clear */ +#define IMR_CPWM2_88E BIT9 /* CPU power Mode exchange INT Status, Write 1 clear */ +#define IMR_CPWM_88E BIT8 /* CPU power Mode exchange INT Status, Write 1 clear */ +#define IMR_HIGHDOK_88E BIT7 /* High Queue DMA OK */ +#define IMR_MGNTDOK_88E BIT6 /* Management Queue DMA OK */ +#define IMR_BKDOK_88E BIT5 /* AC_BK DMA OK */ +#define IMR_BEDOK_88E BIT4 /* AC_BE DMA OK */ +#define IMR_VIDOK_88E BIT3 /* AC_VI DMA OK */ +#define IMR_VODOK_88E BIT2 /* AC_VO DMA OK */ +#define IMR_RDU_88E BIT1 /* Rx Descriptor Unavailable */ +#define IMR_ROK_88E BIT0 /* Receive DMA OK */ + +/* IMR DW1(0x00B4-00B7) Bit 0-31 */ +#define IMR_BCNDMAINT7_88E BIT27 /* Beacon DMA Interrupt 7 */ +#define IMR_BCNDMAINT6_88E BIT26 /* Beacon DMA Interrupt 6 */ +#define IMR_BCNDMAINT5_88E BIT25 /* Beacon DMA Interrupt 5 */ +#define IMR_BCNDMAINT4_88E BIT24 /* Beacon DMA Interrupt 4 */ +#define IMR_BCNDMAINT3_88E BIT23 /* Beacon DMA Interrupt 3 */ +#define IMR_BCNDMAINT2_88E BIT22 /* Beacon DMA Interrupt 2 */ +#define IMR_BCNDMAINT1_88E BIT21 /* Beacon DMA Interrupt 1 */ +#define IMR_BCNDOK7_88E BIT20 /* Beacon Queue DMA OK Interrup 7 */ +#define IMR_BCNDOK6_88E BIT19 /* Beacon Queue DMA OK Interrup 6 */ +#define IMR_BCNDOK5_88E BIT18 /* Beacon Queue DMA OK Interrup 5 */ +#define IMR_BCNDOK4_88E BIT17 /* Beacon Queue DMA OK Interrup 4 */ +#define IMR_BCNDOK3_88E BIT16 /* Beacon Queue DMA OK Interrup 3 */ +#define IMR_BCNDOK2_88E BIT15 /* Beacon Queue DMA OK Interrup 2 */ +#define IMR_BCNDOK1_88E BIT14 /* Beacon Queue DMA OK Interrup 1 */ +#define IMR_ATIMEND_E_88E BIT13 /* ATIM Window End Extension for Win7 */ +#define IMR_TXERR_88E BIT11 /* Tx Error Flag Interrupt Status, write 1 clear. */ +#define IMR_RXERR_88E BIT10 /* Rx Error Flag INT Status, Write 1 clear */ +#define IMR_TXFOVW_88E BIT9 /* Transmit FIFO Overflow */ +#define IMR_RXFOVW_88E BIT8 /* Receive FIFO Overflow */ + +/*=================================================================== +===================================================================== +Here the register defines are for 92C. When the define is as same with 92C, +we will use the 92C's define for the consistency +So the following defines for 92C is not entire!!!!!! +===================================================================== +=====================================================================*/ +/* +Based on Datasheet V33---090401 +Register Summary +Current IOREG MAP +0x0000h ~ 0x00FFh System Configuration (256 Bytes) +0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes) +0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes) +0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes) +0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes) +0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes) +0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes) +0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes) +0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes) +*/ + /* */ + /* 8192C (TXPAUSE) transmission pause (Offset 0x522, 8 bits) */ + /* */ +/* Note: */ +/* The the bits of stoping AC(VO/VI/BE/BK) queue in datasheet RTL8192S/RTL8192C are wrong, */ +/* the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2, and BK - Bit3. */ +/* 8723 and 88E may be not correct either in the eralier version. Confirmed with DD Tim. */ +/* By Bruce, 2011-09-22. */ +#define StopBecon BIT6 +#define StopHigh BIT5 +#define StopMgt BIT4 +#define StopBK BIT3 +#define StopBE BIT2 +#define StopVI BIT1 +#define StopVO BIT0 + +/* */ +/* 8192C (RCR) Receive Configuration Register (Offset 0x608, 32 bits) */ +/* */ +#define RCR_APPFCS BIT31 /* WMAC append FCS after pauload */ +#define RCR_APP_MIC BIT30 /* MACRX will retain the MIC at the bottom of the packet. */ +#define RCR_APP_ICV BIT29 /* MACRX will retain the ICV at the bottom of the packet. */ +#define RCR_APP_PHYST_RXFF BIT28 /* PHY Status is appended before RX packet in RXFF */ +#define RCR_APP_BA_SSN BIT27 /* SSN of previous TXBA is appended as after original RXDESC as the 4-th DW of RXDESC. */ +#define RCR_NONQOS_VHT BIT26 /* Reserved */ +#define RCR_RSVD_BIT25 BIT25 /* Reserved */ +#define RCR_ENMBID BIT24 /* Enable Multiple BssId. Only response ACK to the packets whose DID(A1) matching to the addresses in the MBSSID CAM Entries. */ +#define RCR_LSIGEN BIT23 /* Enable LSIG TXOP Protection function. Search KEYCAM for each rx packet to check if LSIGEN bit is set. */ +#define RCR_MFBEN BIT22 /* Enable immediate MCS Feedback function. When Rx packet with MRQ = 1'b1, then search KEYCAM to find sender's MCS Feedback function and send response. */ +#define RCR_RSVD_BIT21 BIT21 /* Reserved */ +#define RCR_RSVD_BIT20 BIT20 /* Reserved */ +#define RCR_RSVD_BIT19 BIT19 /* Reserved */ +#define RCR_TIM_PARSER_EN BIT18 /* RX Beacon TIM Parser. */ +#define RCR_BM_DATA_EN BIT17 /* Broadcast data packet interrupt enable. */ +#define RCR_UC_DATA_EN BIT16 /* Unicast data packet interrupt enable. */ +#define RCR_RSVD_BIT15 BIT15 /* Reserved */ +#define RCR_HTC_LOC_CTRL BIT14 /* MFC<--HTC = 1 MFC-->HTC = 0 */ +#define RCR_AMF BIT13 /* Accept management type frame */ +#define RCR_ACF BIT12 /* Accept control type frame. Control frames BA, BAR, and PS-Poll (when in AP mode) are not controlled by this bit. They are controlled by ADF. */ +#define RCR_ADF BIT11 /* Accept data type frame. This bit also regulates BA, BAR, and PS-Poll (AP mode only). */ +#define RCR_RSVD_BIT10 BIT10 /* Reserved */ +#define RCR_AICV BIT9 /* Accept ICV error packet */ +#define RCR_ACRC32 BIT8 /* Accept CRC32 error packet */ +#define RCR_CBSSID_BCN BIT7 /* Accept BSSID match packet (Rx beacon, probe rsp) */ +#define RCR_CBSSID_DATA BIT6 /* Accept BSSID match packet (Data) */ +#define RCR_CBSSID RCR_CBSSID_DATA /* Accept BSSID match packet */ +#define RCR_APWRMGT BIT5 /* Accept power management packet */ +#define RCR_ADD3 BIT4 /* Accept address 3 match packet */ +#define RCR_AB BIT3 /* Accept broadcast packet */ +#define RCR_AM BIT2 /* Accept multicast packet */ +#define RCR_APM BIT1 /* Accept physical match packet */ +#define RCR_AAP BIT0 /* Accept all unicast packet */ + + +/* */ +/* */ +/* 0x0000h ~ 0x00FFh System Configuration */ +/* */ +/* */ + +/* 2 SYS_ISO_CTRL */ +#define ISO_MD2PP BIT(0) +#define ISO_UA2USB BIT(1) +#define ISO_UD2CORE BIT(2) +#define ISO_PA2PCIE BIT(3) +#define ISO_PD2CORE BIT(4) +#define ISO_IP2MAC BIT(5) +#define ISO_DIOP BIT(6) +#define ISO_DIOE BIT(7) +#define ISO_EB2CORE BIT(8) +#define ISO_DIOR BIT(9) +#define PWC_EV12V BIT(15) + + +/* 2 SYS_FUNC_EN */ +#define FEN_BBRSTB BIT(0) +#define FEN_BB_GLB_RSTn BIT(1) +#define FEN_USBA BIT(2) +#define FEN_UPLL BIT(3) +#define FEN_USBD BIT(4) +#define FEN_DIO_PCIE BIT(5) +#define FEN_PCIEA BIT(6) +#define FEN_PPLL BIT(7) +#define FEN_PCIED BIT(8) +#define FEN_DIOE BIT(9) +#define FEN_CPUEN BIT(10) +#define FEN_DCORE BIT(11) +#define FEN_ELDR BIT(12) +#define FEN_EN_25_1 BIT(13) +#define FEN_HWPDN BIT(14) +#define FEN_MREGEN BIT(15) + +/* 2 APS_FSMCO */ +#define PFM_LDALL BIT(0) +#define PFM_ALDN BIT(1) +#define PFM_LDKP BIT(2) +#define PFM_WOWL BIT(3) +#define EnPDN BIT(4) +#define PDN_PL BIT(5) +#define APFM_ONMAC BIT(8) +#define APFM_OFF BIT(9) +#define APFM_RSM BIT(10) +#define AFSM_HSUS BIT(11) +#define AFSM_PCIE BIT(12) +#define APDM_MAC BIT(13) +#define APDM_HOST BIT(14) +#define APDM_HPDN BIT(15) +#define RDY_MACON BIT(16) +#define SUS_HOST BIT(17) +#define ROP_ALD BIT(20) +#define ROP_PWR BIT(21) +#define ROP_SPS BIT(22) +#define SOP_MRST BIT(25) +#define SOP_FUSE BIT(26) +#define SOP_ABG BIT(27) +#define SOP_AMB BIT(28) +#define SOP_RCK BIT(29) +#define SOP_A8M BIT(30) +#define XOP_BTCK BIT(31) + +/* 2 SYS_CLKR */ +#define ANAD16V_EN BIT(0) +#define ANA8M BIT(1) +#define MACSLP BIT(4) +#define LOADER_CLK_EN BIT(5) + + +/* 2 9346CR /REG_SYS_EEPROM_CTRL */ +#define BOOT_FROM_EEPROM BIT(4) +#define EEPROMSEL BIT(4) +#define EEPROM_EN BIT(5) + + +/* 2 RF_CTRL */ +#define RF_EN BIT(0) +#define RF_RSTB BIT(1) +#define RF_SDMRSTB BIT(2) + + +/* 2 LDOV12D_CTRL */ +#define LDV12_EN BIT(0) +#define LDV12_SDBY BIT(1) +#define LPLDO_HSM BIT(2) +#define LPLDO_LSM_DIS BIT(3) +#define _LDV12_VADJ(x) (((x) & 0xF) << 4) + + + +/* 2 EFUSE_TEST (For RTL8723 partially) */ +#define EF_TRPT BIT(7) +#define EF_CELL_SEL (BIT(8)|BIT(9)) /* 00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2 */ +#define LDOE25_EN BIT(31) +#define EFUSE_SEL(x) (((x) & 0x3) << 8) +#define EFUSE_SEL_MASK 0x300 +#define EFUSE_WIFI_SEL_0 0x0 +#define EFUSE_BT_SEL_0 0x1 +#define EFUSE_BT_SEL_1 0x2 +#define EFUSE_BT_SEL_2 0x3 + + +/* 2 8051FWDL */ +/* 2 MCUFWDL */ +#define MCUFWDL_EN BIT(0) +#define MCUFWDL_RDY BIT(1) +#define FWDL_ChkSum_rpt BIT(2) +#define MACINI_RDY BIT(3) +#define BBINI_RDY BIT(4) +#define RFINI_RDY BIT(5) +#define WINTINI_RDY BIT(6) +#define RAM_DL_SEL BIT(7) +#define ROM_DLEN BIT(19) +#define CPRST BIT(23) + + +/* 2 REG_SYS_CFG */ +#define XCLK_VLD BIT(0) +#define ACLK_VLD BIT(1) +#define UCLK_VLD BIT(2) +#define PCLK_VLD BIT(3) +#define PCIRSTB BIT(4) +#define V15_VLD BIT(5) +#define SW_OFFLOAD_EN BIT(7) +#define SIC_IDLE BIT(8) +#define BD_MAC2 BIT(9) +#define BD_MAC1 BIT(10) +#define IC_MACPHY_MODE BIT(11) +#define CHIP_VER (BIT(12)|BIT(13)|BIT(14)|BIT(15)) +#define BT_FUNC BIT(16) +#define VENDOR_ID BIT(19) +#define EXT_VENDOR_ID (BIT(18)|BIT(19)) /* Currently only for RTL8723B */ +#define PAD_HWPD_IDN BIT(22) +#define TRP_VAUX_EN BIT(23) /* RTL ID */ +#define TRP_BT_EN BIT(24) +#define BD_PKG_SEL BIT(25) +#define BD_HCI_SEL BIT(26) +#define TYPE_ID BIT(27) +#define RF_TYPE_ID BIT(27) + +#define RTL_ID BIT(23) /* TestChip ID, 1:Test(RLE); 0:MP(RL) */ +#define SPS_SEL BIT(24) /* 1:LDO regulator mode; 0:Switching regulator mode */ + + +#define CHIP_VER_RTL_MASK 0xF000 /* Bit 12 ~ 15 */ +#define CHIP_VER_RTL_SHIFT 12 +#define EXT_VENDOR_ID_SHIFT 18 + +/* 2 REG_GPIO_OUTSTS (For RTL8723 only) */ +#define EFS_HCI_SEL (BIT(0)|BIT(1)) +#define PAD_HCI_SEL (BIT(2)|BIT(3)) +#define HCI_SEL (BIT(4)|BIT(5)) +#define PKG_SEL_HCI BIT(6) +#define FEN_GPS BIT(7) +#define FEN_BT BIT(8) +#define FEN_WL BIT(9) +#define FEN_PCI BIT(10) +#define FEN_USB BIT(11) +#define BTRF_HWPDN_N BIT(12) +#define WLRF_HWPDN_N BIT(13) +#define PDN_BT_N BIT(14) +#define PDN_GPS_N BIT(15) +#define BT_CTL_HWPDN BIT(16) +#define GPS_CTL_HWPDN BIT(17) +#define PPHY_SUSB BIT(20) +#define UPHY_SUSB BIT(21) +#define PCI_SUSEN BIT(22) +#define USB_SUSEN BIT(23) +#define RF_RL_ID (BIT(31)|BIT(30)|BIT(29)|BIT(28)) + + +/* */ +/* */ +/* 0x0100h ~ 0x01FFh MACTOP General Configuration */ +/* */ +/* */ + +/* 2 Function Enable Registers */ +/* 2 CR */ +#define HCI_TXDMA_EN BIT(0) +#define HCI_RXDMA_EN BIT(1) +#define TXDMA_EN BIT(2) +#define RXDMA_EN BIT(3) +#define PROTOCOL_EN BIT(4) +#define SCHEDULE_EN BIT(5) +#define MACTXEN BIT(6) +#define MACRXEN BIT(7) +#define ENSWBCN BIT(8) +#define ENSEC BIT(9) +#define CALTMR_EN BIT(10) /* 32k CAL TMR enable */ + +/* Network type */ +#define _NETTYPE(x) (((x) & 0x3) << 16) +#define MASK_NETTYPE 0x30000 +#define NT_NO_LINK 0x0 +#define NT_LINK_AD_HOC 0x1 +#define NT_LINK_AP 0x2 +#define NT_AS_AP 0x3 + +/* 2 PBP - Page Size Register */ +#define GET_RX_PAGE_SIZE(value) ((value) & 0xF) +#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4) +#define _PSRX_MASK 0xF +#define _PSTX_MASK 0xF0 +#define _PSRX(x) (x) +#define _PSTX(x) ((x) << 4) + +#define PBP_64 0x0 +#define PBP_128 0x1 +#define PBP_256 0x2 +#define PBP_512 0x3 +#define PBP_1024 0x4 + + +/* 2 TX/RXDMA */ +#define RXDMA_ARBBW_EN BIT(0) +#define RXSHFT_EN BIT(1) +#define RXDMA_AGG_EN BIT(2) +#define QS_VO_QUEUE BIT(8) +#define QS_VI_QUEUE BIT(9) +#define QS_BE_QUEUE BIT(10) +#define QS_BK_QUEUE BIT(11) +#define QS_MANAGER_QUEUE BIT(12) +#define QS_HIGH_QUEUE BIT(13) + +#define HQSEL_VOQ BIT(0) +#define HQSEL_VIQ BIT(1) +#define HQSEL_BEQ BIT(2) +#define HQSEL_BKQ BIT(3) +#define HQSEL_MGTQ BIT(4) +#define HQSEL_HIQ BIT(5) + +/* For normal driver, 0x10C */ +#define _TXDMA_CMQ_MAP(x) (((x)&0x3) << 16) +#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14) +#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12) +#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10) +#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8) +#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6) +#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4) + +#define QUEUE_EXTRA 0 +#define QUEUE_LOW 1 +#define QUEUE_NORMAL 2 +#define QUEUE_HIGH 3 + + +/* 2 TRXFF_BNDY */ + + +/* 2 LLT_INIT */ +#define _LLT_NO_ACTIVE 0x0 +#define _LLT_WRITE_ACCESS 0x1 +#define _LLT_READ_ACCESS 0x2 + +#define _LLT_INIT_DATA(x) ((x) & 0xFF) +#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8) +#define _LLT_OP(x) (((x) & 0x3) << 30) +#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3) + + +/* */ +/* */ +/* 0x0200h ~ 0x027Fh TXDMA Configuration */ +/* */ +/* */ +/* 2 RQPN */ +#define _HPQ(x) ((x) & 0xFF) +#define _LPQ(x) (((x) & 0xFF) << 8) +#define _PUBQ(x) (((x) & 0xFF) << 16) +#define _NPQ(x) ((x) & 0xFF) /* NOTE: in RQPN_NPQ register */ +#define _EPQ(x) (((x) & 0xFF) << 16) /* NOTE: in RQPN_EPQ register */ + + +#define HPQ_PUBLIC_DIS BIT(24) +#define LPQ_PUBLIC_DIS BIT(25) +#define LD_RQPN BIT(31) + + +/* 2 TDECTL */ +#define BLK_DESC_NUM_SHIFT 4 +#define BLK_DESC_NUM_MASK 0xF + + +/* 2 TXDMA_OFFSET_CHK */ +#define DROP_DATA_EN BIT(9) + +/* 2 AUTO_LLT */ +#define BIT_SHIFT_TXPKTNUM 24 +#define BIT_MASK_TXPKTNUM 0xff +#define BIT_TXPKTNUM(x) (((x) & BIT_MASK_TXPKTNUM) << BIT_SHIFT_TXPKTNUM) + +#define BIT_TDE_DBG_SEL BIT(23) +#define BIT_AUTO_INIT_LLT BIT(16) + +#define BIT_SHIFT_Tx_OQT_free_space 8 +#define BIT_MASK_Tx_OQT_free_space 0xff +#define BIT_Tx_OQT_free_space(x) (((x) & BIT_MASK_Tx_OQT_free_space) << BIT_SHIFT_Tx_OQT_free_space) + + +/* */ +/* */ +/* 0x0280h ~ 0x028Bh RX DMA Configuration */ +/* */ +/* */ + +/* 2 REG_RXDMA_CONTROL, 0x0286h */ +/* Write only. When this bit is set, RXDMA will decrease RX PKT counter by one. Before */ +/* this bit is polled, FW shall update RXFF_RD_PTR first. This register is write pulse and auto clear. */ +/* define RXPKT_RELEASE_POLL BIT(0) */ +/* Read only. When RXMA finishes on-going DMA operation, RXMDA will report idle state in */ +/* this bit. FW can start releasing packets after RXDMA entering idle mode. */ +/* define RXDMA_IDLE BIT(1) */ +/* When this bit is set, RXDMA will enter this mode after on-going RXDMA packet to host */ +/* completed, and stop DMA packet to host. RXDMA will then report Default: 0; */ +/* define RW_RELEASE_EN BIT(2) */ + +/* 2 REG_RXPKT_NUM, 0x0284 */ +#define RXPKT_RELEASE_POLL BIT(16) +#define RXDMA_IDLE BIT(17) +#define RW_RELEASE_EN BIT(18) + +/* */ +/* */ +/* 0x0400h ~ 0x047Fh Protocol Configuration */ +/* */ +/* */ +/* 2 FWHW_TXQ_CTRL */ +#define EN_AMPDU_RTY_NEW BIT(7) + + +/* 2 SPEC SIFS */ +#define _SPEC_SIFS_CCK(x) ((x) & 0xFF) +#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8) + +/* 2 RL */ +#define RETRY_LIMIT_SHORT_SHIFT 8 +#define RETRY_LIMIT_LONG_SHIFT 0 + +/* */ +/* */ +/* 0x0500h ~ 0x05FFh EDCA Configuration */ +/* */ +/* */ + +/* 2 EDCA setting */ +#define AC_PARAM_TXOP_LIMIT_OFFSET 16 +#define AC_PARAM_ECW_MAX_OFFSET 12 +#define AC_PARAM_ECW_MIN_OFFSET 8 +#define AC_PARAM_AIFS_OFFSET 0 + + +#define _LRL(x) ((x) & 0x3F) +#define _SRL(x) (((x) & 0x3F) << 8) + + +/* 2 BCN_CTRL */ +#define EN_TXBCN_RPT BIT(2) +#define EN_BCN_FUNCTION BIT(3) +#define STOP_BCNQ BIT(6) +#define DIS_RX_BSSID_FIT BIT(6) + +#define DIS_ATIM BIT(0) +#define DIS_BCNQ_SUB BIT(1) +#define DIS_TSF_UDT BIT(4) + +/* The same function but different bit field. */ +#define DIS_TSF_UDT0_NORMAL_CHIP BIT(4) +#define DIS_TSF_UDT0_TEST_CHIP BIT(5) + + +/* 2 ACMHWCTRL */ +#define AcmHw_HwEn BIT(0) +#define AcmHw_BeqEn BIT(1) +#define AcmHw_ViqEn BIT(2) +#define AcmHw_VoqEn BIT(3) +#define AcmHw_BeqStatus BIT(4) +#define AcmHw_ViqStatus BIT(5) +#define AcmHw_VoqStatus BIT(6) + +/* 2 REG_DUAL_TSF_RST (0x553) */ +#define DUAL_TSF_RST_P2P BIT(4) + +/* 2 REG_NOA_DESC_SEL (0x5CF) */ +#define NOA_DESC_SEL_0 0 +#define NOA_DESC_SEL_1 BIT(4) + +/* */ +/* */ +/* 0x0600h ~ 0x07FFh WMAC Configuration */ +/* */ +/* */ + +/* 2 APSD_CTRL */ +#define APSDOFF BIT(6) + +/* 2 TCR */ +#define TSFRST BIT(0) +#define DIS_GCLK BIT(1) +#define PAD_SEL BIT(2) +#define PWR_ST BIT(6) +#define PWRBIT_OW_EN BIT(7) +#define ACRC BIT(8) +#define CFENDFORM BIT(9) +#define ICV BIT(10) + + +/* 2 RCR */ +#define AAP BIT(0) +#define APM BIT(1) +#define AM BIT(2) +#define AB BIT(3) +#define ADD3 BIT(4) +#define APWRMGT BIT(5) +#define CBSSID BIT(6) +#define CBSSID_DATA BIT(6) +#define CBSSID_BCN BIT(7) +#define ACRC32 BIT(8) +#define AICV BIT(9) +#define ADF BIT(11) +#define ACF BIT(12) +#define AMF BIT(13) +#define HTC_LOC_CTRL BIT(14) +#define UC_DATA_EN BIT(16) +#define BM_DATA_EN BIT(17) +#define MFBEN BIT(22) +#define LSIGEN BIT(23) +#define EnMBID BIT(24) +#define FORCEACK BIT(26) +#define APP_BASSN BIT(27) +#define APP_PHYSTS BIT(28) +#define APP_ICV BIT(29) +#define APP_MIC BIT(30) +#define APP_FCS BIT(31) + + +/* 2 SECCFG */ +#define SCR_TxUseDK BIT(0) /* Force Tx Use Default Key */ +#define SCR_RxUseDK BIT(1) /* Force Rx Use Default Key */ +#define SCR_TxEncEnable BIT(2) /* Enable Tx Encryption */ +#define SCR_RxDecEnable BIT(3) /* Enable Rx Decryption */ +#define SCR_SKByA2 BIT(4) /* Search kEY BY A2 */ +#define SCR_NoSKMC BIT(5) /* No Key Search Multicast */ +#define SCR_TXBCUSEDK BIT(6) /* Force Tx Broadcast packets Use Default Key */ +#define SCR_RXBCUSEDK BIT(7) /* Force Rx Broadcast packets Use Default Key */ +#define SCR_CHK_KEYID BIT(8) + +/* */ +/* */ +/* SDIO Bus Specification */ +/* */ +/* */ + +/* I/O bus domain address mapping */ +#define SDIO_LOCAL_BASE 0x10250000 +#define WLAN_IOREG_BASE 0x10260000 +#define FIRMWARE_FIFO_BASE 0x10270000 +#define TX_HIQ_BASE 0x10310000 +#define TX_MIQ_BASE 0x10320000 +#define TX_LOQ_BASE 0x10330000 +#define TX_EPQ_BASE 0x10350000 +#define RX_RX0FF_BASE 0x10340000 + +/* SDIO host local register space mapping. */ +#define SDIO_LOCAL_MSK 0x0FFF +#define WLAN_IOREG_MSK 0x7FFF +#define WLAN_FIFO_MSK 0x1FFF /* Aggregation Length[12:0] */ +#define WLAN_RX0FF_MSK 0x0003 + +#define SDIO_WITHOUT_REF_DEVICE_ID 0 /* Without reference to the SDIO Device ID */ +#define SDIO_LOCAL_DEVICE_ID 0 /* 0b[16], 000b[15:13] */ +#define WLAN_TX_HIQ_DEVICE_ID 4 /* 0b[16], 100b[15:13] */ +#define WLAN_TX_MIQ_DEVICE_ID 5 /* 0b[16], 101b[15:13] */ +#define WLAN_TX_LOQ_DEVICE_ID 6 /* 0b[16], 110b[15:13] */ +#define WLAN_TX_EXQ_DEVICE_ID 3 /* 0b[16], 011b[15:13] */ +#define WLAN_RX0FF_DEVICE_ID 7 /* 0b[16], 111b[15:13] */ +#define WLAN_IOREG_DEVICE_ID 8 /* 1b[16] */ + +/* SDIO Tx Free Page Index */ +#define HI_QUEUE_IDX 0 +#define MID_QUEUE_IDX 1 +#define LOW_QUEUE_IDX 2 +#define PUBLIC_QUEUE_IDX 3 + +#define SDIO_MAX_TX_QUEUE 3 /* HIQ, MIQ and LOQ */ +#define SDIO_MAX_RX_QUEUE 1 + +#define SDIO_REG_TX_CTRL 0x0000 /* SDIO Tx Control */ +#define SDIO_REG_HIMR 0x0014 /* SDIO Host Interrupt Mask */ +#define SDIO_REG_HISR 0x0018 /* SDIO Host Interrupt Service Routine */ +#define SDIO_REG_HCPWM 0x0019 /* HCI Current Power Mode */ +#define SDIO_REG_RX0_REQ_LEN 0x001C /* RXDMA Request Length */ +#define SDIO_REG_OQT_FREE_PG 0x001E /* OQT Free Page */ +#define SDIO_REG_FREE_TXPG 0x0020 /* Free Tx Buffer Page */ +#define SDIO_REG_HCPWM1 0x0024 /* HCI Current Power Mode 1 */ +#define SDIO_REG_HCPWM2 0x0026 /* HCI Current Power Mode 2 */ +#define SDIO_REG_FREE_TXPG_SEQ 0x0028 /* Free Tx Page Sequence */ +#define SDIO_REG_HTSFR_INFO 0x0030 /* HTSF Informaion */ +#define SDIO_REG_HRPWM1 0x0080 /* HCI Request Power Mode 1 */ +#define SDIO_REG_HRPWM2 0x0082 /* HCI Request Power Mode 2 */ +#define SDIO_REG_HPS_CLKR 0x0084 /* HCI Power Save Clock */ +#define SDIO_REG_HSUS_CTRL 0x0086 /* SDIO HCI Suspend Control */ +#define SDIO_REG_HIMR_ON 0x0090 /* SDIO Host Extension Interrupt Mask Always */ +#define SDIO_REG_HISR_ON 0x0091 /* SDIO Host Extension Interrupt Status Always */ + +#define SDIO_HIMR_DISABLED 0 + +/* RTL8723/RTL8188E SDIO Host Interrupt Mask Register */ +#define SDIO_HIMR_RX_REQUEST_MSK BIT0 +#define SDIO_HIMR_AVAL_MSK BIT1 +#define SDIO_HIMR_TXERR_MSK BIT2 +#define SDIO_HIMR_RXERR_MSK BIT3 +#define SDIO_HIMR_TXFOVW_MSK BIT4 +#define SDIO_HIMR_RXFOVW_MSK BIT5 +#define SDIO_HIMR_TXBCNOK_MSK BIT6 +#define SDIO_HIMR_TXBCNERR_MSK BIT7 +#define SDIO_HIMR_BCNERLY_INT_MSK BIT16 +#define SDIO_HIMR_C2HCMD_MSK BIT17 +#define SDIO_HIMR_CPWM1_MSK BIT18 +#define SDIO_HIMR_CPWM2_MSK BIT19 +#define SDIO_HIMR_HSISR_IND_MSK BIT20 +#define SDIO_HIMR_GTINT3_IND_MSK BIT21 +#define SDIO_HIMR_GTINT4_IND_MSK BIT22 +#define SDIO_HIMR_PSTIMEOUT_MSK BIT23 +#define SDIO_HIMR_OCPINT_MSK BIT24 +#define SDIO_HIMR_ATIMEND_MSK BIT25 +#define SDIO_HIMR_ATIMEND_E_MSK BIT26 +#define SDIO_HIMR_CTWEND_MSK BIT27 + +/* RTL8188E SDIO Specific */ +#define SDIO_HIMR_MCU_ERR_MSK BIT28 +#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT29 + +/* SDIO Host Interrupt Service Routine */ +#define SDIO_HISR_RX_REQUEST BIT0 +#define SDIO_HISR_AVAL BIT1 +#define SDIO_HISR_TXERR BIT2 +#define SDIO_HISR_RXERR BIT3 +#define SDIO_HISR_TXFOVW BIT4 +#define SDIO_HISR_RXFOVW BIT5 +#define SDIO_HISR_TXBCNOK BIT6 +#define SDIO_HISR_TXBCNERR BIT7 +#define SDIO_HISR_BCNERLY_INT BIT16 +#define SDIO_HISR_C2HCMD BIT17 +#define SDIO_HISR_CPWM1 BIT18 +#define SDIO_HISR_CPWM2 BIT19 +#define SDIO_HISR_HSISR_IND BIT20 +#define SDIO_HISR_GTINT3_IND BIT21 +#define SDIO_HISR_GTINT4_IND BIT22 +#define SDIO_HISR_PSTIMEOUT BIT23 +#define SDIO_HISR_OCPINT BIT24 +#define SDIO_HISR_ATIMEND BIT25 +#define SDIO_HISR_ATIMEND_E BIT26 +#define SDIO_HISR_CTWEND BIT27 + +/* RTL8188E SDIO Specific */ +#define SDIO_HISR_MCU_ERR BIT28 +#define SDIO_HISR_TSF_BIT32_TOGGLE BIT29 + +#define MASK_SDIO_HISR_CLEAR (SDIO_HISR_TXERR |\ + SDIO_HISR_RXERR |\ + SDIO_HISR_TXFOVW |\ + SDIO_HISR_RXFOVW |\ + SDIO_HISR_TXBCNOK |\ + SDIO_HISR_TXBCNERR |\ + SDIO_HISR_C2HCMD |\ + SDIO_HISR_CPWM1 |\ + SDIO_HISR_CPWM2 |\ + SDIO_HISR_HSISR_IND |\ + SDIO_HISR_GTINT3_IND |\ + SDIO_HISR_GTINT4_IND |\ + SDIO_HISR_PSTIMEOUT |\ + SDIO_HISR_OCPINT) + +/* SDIO HCI Suspend Control Register */ +#define HCI_RESUME_PWR_RDY BIT1 +#define HCI_SUS_CTRL BIT0 + +/* SDIO Tx FIFO related */ +#define SDIO_TX_FREE_PG_QUEUE 4 /* The number of Tx FIFO free page */ +#define SDIO_TX_FIFO_PAGE_SZ 128 + +#define MAX_TX_AGG_PACKET_NUMBER 0x8 + +/* */ +/* */ +/* 0xFE00h ~ 0xFE55h USB Configuration */ +/* */ +/* */ + +/* 2 USB Information (0xFE17) */ +#define USB_IS_HIGH_SPEED 0 +#define USB_IS_FULL_SPEED 1 +#define USB_SPEED_MASK BIT(5) + +#define USB_NORMAL_SIE_EP_MASK 0xF +#define USB_NORMAL_SIE_EP_SHIFT 4 + +/* 2 Special Option */ +#define USB_AGG_EN BIT(3) + +/* 0; Use interrupt endpoint to upload interrupt pkt */ +/* 1; Use bulk endpoint to upload interrupt pkt, */ +#define INT_BULK_SEL BIT(4) + +/* 2REG_C2HEVT_CLEAR */ +#define C2H_EVT_HOST_CLOSE 0x00 /* Set by driver and notify FW that the driver has read the C2H command message */ +#define C2H_EVT_FW_CLOSE 0xFF /* Set by FW indicating that FW had set the C2H command message and it's not yet read by driver. */ + + +/* 2REG_MULTI_FUNC_CTRL(For RTL8723 Only) */ +#define WL_HWPDN_EN BIT0 /* Enable GPIO[9] as WiFi HW PDn source */ +#define WL_HWPDN_SL BIT1 /* WiFi HW PDn polarity control */ +#define WL_FUNC_EN BIT2 /* WiFi function enable */ +#define WL_HWROF_EN BIT3 /* Enable GPIO[9] as WiFi RF HW PDn source */ +#define BT_HWPDN_EN BIT16 /* Enable GPIO[11] as BT HW PDn source */ +#define BT_HWPDN_SL BIT17 /* BT HW PDn polarity control */ +#define BT_FUNC_EN BIT18 /* BT function enable */ +#define BT_HWROF_EN BIT19 /* Enable GPIO[11] as BT/GPS RF HW PDn source */ +#define GPS_HWPDN_EN BIT20 /* Enable GPIO[10] as GPS HW PDn source */ +#define GPS_HWPDN_SL BIT21 /* GPS HW PDn polarity control */ +#define GPS_FUNC_EN BIT22 /* GPS function enable */ + +/* 3 REG_LIFECTRL_CTRL */ +#define HAL92C_EN_PKT_LIFE_TIME_BK BIT3 +#define HAL92C_EN_PKT_LIFE_TIME_BE BIT2 +#define HAL92C_EN_PKT_LIFE_TIME_VI BIT1 +#define HAL92C_EN_PKT_LIFE_TIME_VO BIT0 + +#define HAL92C_MSDU_LIFE_TIME_UNIT 128 /* in us, said by Tim. */ + +/* 2 8192D PartNo. */ +#define PARTNO_92D_NIC (BIT7|BIT6) +#define PARTNO_92D_NIC_REMARK (BIT5|BIT4) +#define PARTNO_SINGLE_BAND_VS BIT3 +#define PARTNO_SINGLE_BAND_VS_REMARK BIT1 +#define PARTNO_CONCURRENT_BAND_VC (BIT3|BIT2) +#define PARTNO_CONCURRENT_BAND_VC_REMARK (BIT1|BIT0) + +/* */ +/* General definitions */ +/* */ + +#define LAST_ENTRY_OF_TX_PKT_BUFFER_8188E 176 +#define LAST_ENTRY_OF_TX_PKT_BUFFER_8812 255 +#define LAST_ENTRY_OF_TX_PKT_BUFFER_8723B 255 +#define LAST_ENTRY_OF_TX_PKT_BUFFER_8192C 255 +#define LAST_ENTRY_OF_TX_PKT_BUFFER_DUAL_MAC 127 + +#define POLLING_LLT_THRESHOLD 20 +#define POLLING_READY_TIMEOUT_COUNT 1000 + + +/* GPIO BIT */ +#define HAL_8192C_HW_GPIO_WPS_BIT BIT2 +#define HAL_8192EU_HW_GPIO_WPS_BIT BIT7 +#define HAL_8188E_HW_GPIO_WPS_BIT BIT7 + +#endif /* __HAL_COMMON_H__ */ |