diff options
Diffstat (limited to 'drivers/staging/rtl8192u/r819xU_phy.c')
-rw-r--r-- | drivers/staging/rtl8192u/r819xU_phy.c | 1777 |
1 files changed, 1777 insertions, 0 deletions
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c new file mode 100644 index 0000000..a3adaed --- /dev/null +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -0,0 +1,1777 @@ +#include "r8192U.h" +#include "r8192U_hw.h" +#include "r819xU_phy.h" +#include "r819xU_phyreg.h" +#include "r8190_rtl8256.h" +#include "r8192U_dm.h" +#include "r819xU_firmware_img.h" + +#ifdef ENABLE_DOT11D +#include "dot11d.h" +#endif +static u32 RF_CHANNEL_TABLE_ZEBRA[] = { + 0, + 0x085c, //2412 1 + 0x08dc, //2417 2 + 0x095c, //2422 3 + 0x09dc, //2427 4 + 0x0a5c, //2432 5 + 0x0adc, //2437 6 + 0x0b5c, //2442 7 + 0x0bdc, //2447 8 + 0x0c5c, //2452 9 + 0x0cdc, //2457 10 + 0x0d5c, //2462 11 + 0x0ddc, //2467 12 + 0x0e5c, //2472 13 + 0x0f72, //2484 +}; + + +#define rtl819XPHY_REG_1T2RArray Rtl8192UsbPHY_REG_1T2RArray +#define rtl819XMACPHY_Array_PG Rtl8192UsbMACPHY_Array_PG +#define rtl819XMACPHY_Array Rtl8192UsbMACPHY_Array +#define rtl819XRadioA_Array Rtl8192UsbRadioA_Array +#define rtl819XRadioB_Array Rtl8192UsbRadioB_Array +#define rtl819XRadioC_Array Rtl8192UsbRadioC_Array +#define rtl819XRadioD_Array Rtl8192UsbRadioD_Array +#define rtl819XAGCTAB_Array Rtl8192UsbAGCTAB_Array + +/****************************************************************************** + *function: This function read BB parameters from Header file we gen, + * and do register read/write + * input: u32 dwBitMask //taget bit pos in the addr to be modified + * output: none + * return: u32 return the shift bit bit position of the mask + * ****************************************************************************/ +u32 rtl8192_CalculateBitShift(u32 dwBitMask) +{ + u32 i; + for (i=0; i<=31; i++) + { + if (((dwBitMask>>i)&0x1) == 1) + break; + } + return i; +} +/****************************************************************************** + *function: This function check different RF type to execute legal judgement. If RF Path is illegal, we will return false. + * input: none + * output: none + * return: 0(illegal, false), 1(legal,true) + * ***************************************************************************/ +u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath) +{ + u8 ret = 1; + struct r8192_priv *priv = ieee80211_priv(dev); + if (priv->rf_type == RF_2T4R) + ret = 0; + else if (priv->rf_type == RF_1T2R) + { + if (eRFPath == RF90_PATH_A || eRFPath == RF90_PATH_B) + ret = 1; + else if (eRFPath == RF90_PATH_C || eRFPath == RF90_PATH_D) + ret = 0; + } + return ret; +} +/****************************************************************************** + *function: This function set specific bits to BB register + * input: net_device dev + * u32 dwRegAddr //target addr to be modified + * u32 dwBitMask //taget bit pos in the addr to be modified + * u32 dwData //value to be write + * output: none + * return: none + * notice: + * ****************************************************************************/ +void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData) +{ + + u32 OriginalValue, BitShift, NewValue; + + if(dwBitMask!= bMaskDWord) + {//if not "double word" write + OriginalValue = read_nic_dword(dev, dwRegAddr); + BitShift = rtl8192_CalculateBitShift(dwBitMask); + NewValue = (((OriginalValue) & (~dwBitMask)) | (dwData << BitShift)); + write_nic_dword(dev, dwRegAddr, NewValue); + }else + write_nic_dword(dev, dwRegAddr, dwData); + return; +} +/****************************************************************************** + *function: This function reads specific bits from BB register + * input: net_device dev + * u32 dwRegAddr //target addr to be readback + * u32 dwBitMask //taget bit pos in the addr to be readback + * output: none + * return: u32 Data //the readback register value + * notice: + * ****************************************************************************/ +u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask) +{ + u32 Ret = 0, OriginalValue, BitShift; + + OriginalValue = read_nic_dword(dev, dwRegAddr); + BitShift = rtl8192_CalculateBitShift(dwBitMask); + Ret =(OriginalValue & dwBitMask) >> BitShift; + + return (Ret); +} +static u32 phy_FwRFSerialRead( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset ); + +static void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data); + +/****************************************************************************** + *function: This function read register from RF chip + * input: net_device dev + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * u32 Offset //target address to be read + * output: none + * return: u32 readback value + * notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information. + * ****************************************************************************/ +u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 ret = 0; + u32 NewOffset = 0; + BB_REGISTER_DEFINITION_T* pPhyReg = &priv->PHYRegDef[eRFPath]; + rtl8192_setBBreg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData, 0); + //make sure RF register offset is correct + Offset &= 0x3f; + + //switch page for 8256 RF IC + if (priv->rf_chip == RF_8256) + { + if (Offset >= 31) + { + priv->RfReg0Value[eRFPath] |= 0x140; + //Switch to Reg_Mode2 for Reg 31-45 + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); + //modify offset + NewOffset = Offset -30; + } + else if (Offset >= 16) + { + priv->RfReg0Value[eRFPath] |= 0x100; + priv->RfReg0Value[eRFPath] &= (~0x40); + //Switch to Reg_Mode 1 for Reg16-30 + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); + + NewOffset = Offset - 15; + } + else + NewOffset = Offset; + } + else + { + RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n"); + NewOffset = Offset; + } + //put desired read addr to LSSI control Register + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset); + //Issue a posedge trigger + // + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0); + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); + + + // TODO: we should not delay such a long time. Ask help from SD3 + msleep(1); + + ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); + + + // Switch back to Reg_Mode0; + if(priv->rf_chip == RF_8256) + { + priv->RfReg0Value[eRFPath] &= 0xebf; + + rtl8192_setBBreg( + dev, + pPhyReg->rf3wireOffset, + bMaskDWord, + (priv->RfReg0Value[eRFPath] << 16)); + } + + return ret; + +} + +/****************************************************************************** + *function: This function write data to RF register + * input: net_device dev + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * u32 Offset //target address to be written + * u32 Data //The new register data to be written + * output: none + * return: none + * notice: For RF8256 only. + =========================================================== + *Reg Mode RegCTL[1] RegCTL[0] Note + * (Reg00[12]) (Reg00[10]) + *=========================================================== + *Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) + *------------------------------------------------------------------ + *Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) + *------------------------------------------------------------------ + * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) + *------------------------------------------------------------------ + * ****************************************************************************/ +void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 DataAndAddr = 0, NewOffset = 0; + BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; + + Offset &= 0x3f; + //spin_lock_irqsave(&priv->rf_lock, flags); +// down(&priv->rf_sem); + if (priv->rf_chip == RF_8256) + { + + if (Offset >= 31) + { + priv->RfReg0Value[eRFPath] |= 0x140; + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16)); + NewOffset = Offset - 30; + } + else if (Offset >= 16) + { + priv->RfReg0Value[eRFPath] |= 0x100; + priv->RfReg0Value[eRFPath] &= (~0x40); + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16)); + NewOffset = Offset - 15; + } + else + NewOffset = Offset; + } + else + { + RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n"); + NewOffset = Offset; + } + + // Put write addr in [5:0] and write data in [31:16] + DataAndAddr = (Data<<16) | (NewOffset&0x3f); + + // Write Operation + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); + + + if(Offset==0x0) + priv->RfReg0Value[eRFPath] = Data; + + // Switch back to Reg_Mode0; + if(priv->rf_chip == RF_8256) + { + if(Offset != 0) + { + priv->RfReg0Value[eRFPath] &= 0xebf; + rtl8192_setBBreg( + dev, + pPhyReg->rf3wireOffset, + bMaskDWord, + (priv->RfReg0Value[eRFPath] << 16)); + } + } + //spin_unlock_irqrestore(&priv->rf_lock, flags); +// up(&priv->rf_sem); + return; +} + +/****************************************************************************** + *function: This function set specific bits to RF register + * input: net_device dev + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * u32 RegAddr //target addr to be modified + * u32 BitMask //taget bit pos in the addr to be modified + * u32 Data //value to be write + * output: none + * return: none + * notice: + * ****************************************************************************/ +void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 Original_Value, BitShift, New_Value; +// u8 time = 0; + + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + return; + + if (priv->Rf_Mode == RF_OP_By_FW) + { + if (BitMask != bMask12Bits) // RF data is 12 bits only + { + Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); + BitShift = rtl8192_CalculateBitShift(BitMask); + New_Value = ((Original_Value) & (~BitMask)) | (Data<< BitShift); + + phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value); + }else + phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data); + + udelay(200); + + } + else + { + if (BitMask != bMask12Bits) // RF data is 12 bits only + { + Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr); + BitShift = rtl8192_CalculateBitShift(BitMask); + New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); + + rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value); + }else + rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, Data); + } + return; +} + +/****************************************************************************** + *function: This function reads specific bits from RF register + * input: net_device dev + * u32 RegAddr //target addr to be readback + * u32 BitMask //taget bit pos in the addr to be readback + * output: none + * return: u32 Data //the readback register value + * notice: + * ****************************************************************************/ +u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask) +{ + u32 Original_Value, Readback_Value, BitShift; + struct r8192_priv *priv = ieee80211_priv(dev); + + + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + return 0; + if (priv->Rf_Mode == RF_OP_By_FW) + { + Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); + BitShift = rtl8192_CalculateBitShift(BitMask); + Readback_Value = (Original_Value & BitMask) >> BitShift; + udelay(200); + return (Readback_Value); + } + else + { + Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr); + BitShift = rtl8192_CalculateBitShift(BitMask); + Readback_Value = (Original_Value & BitMask) >> BitShift; + return (Readback_Value); + } +} +/****************************************************************************** + *function: We support firmware to execute RF-R/W. + * input: dev + * output: none + * return: none + * notice: + * ***************************************************************************/ +static u32 +phy_FwRFSerialRead( + struct net_device* dev, + RF90_RADIO_PATH_E eRFPath, + u32 Offset ) +{ + u32 retValue = 0; + u32 Data = 0; + u8 time = 0; + //DbgPrint("FW RF CTRL\n\r"); + /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can + not execute the scheme in the initial step. Otherwise, RF-R/W will waste + much time. This is only for site survey. */ + // 1. Read operation need not insert data. bit 0-11 + //Data &= bMask12Bits; + // 2. Write RF register address. Bit 12-19 + Data |= ((Offset&0xFF)<<12); + // 3. Write RF path. bit 20-21 + Data |= ((eRFPath&0x3)<<20); + // 4. Set RF read indicator. bit 22=0 + //Data |= 0x00000; + // 5. Trigger Fw to operate the command. bit 31 + Data |= 0x80000000; + // 6. We can not execute read operation if bit 31 is 1. + while (read_nic_dword(dev, QPNR)&0x80000000) + { + // If FW can not finish RF-R/W for more than ?? times. We must reset FW. + if (time++ < 100) + { + //DbgPrint("FW not finish RF-R Time=%d\n\r", time); + udelay(10); + } + else + break; + } + // 7. Execute read operation. + write_nic_dword(dev, QPNR, Data); + // 8. Check if firmawre send back RF content. + while (read_nic_dword(dev, QPNR)&0x80000000) + { + // If FW can not finish RF-R/W for more than ?? times. We must reset FW. + if (time++ < 100) + { + //DbgPrint("FW not finish RF-W Time=%d\n\r", time); + udelay(10); + } + else + return (0); + } + retValue = read_nic_dword(dev, RF_DATA); + + return (retValue); + +} /* phy_FwRFSerialRead */ + +/****************************************************************************** + *function: We support firmware to execute RF-R/W. + * input: dev + * output: none + * return: none + * notice: + * ***************************************************************************/ +static void +phy_FwRFSerialWrite( + struct net_device* dev, + RF90_RADIO_PATH_E eRFPath, + u32 Offset, + u32 Data ) +{ + u8 time = 0; + + //DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data); + /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can + not execute the scheme in the initial step. Otherwise, RF-R/W will waste + much time. This is only for site survey. */ + + // 1. Set driver write bit and 12 bit data. bit 0-11 + //Data &= bMask12Bits; // Done by uper layer. + // 2. Write RF register address. bit 12-19 + Data |= ((Offset&0xFF)<<12); + // 3. Write RF path. bit 20-21 + Data |= ((eRFPath&0x3)<<20); + // 4. Set RF write indicator. bit 22=1 + Data |= 0x400000; + // 5. Trigger Fw to operate the command. bit 31=1 + Data |= 0x80000000; + + // 6. Write operation. We can not write if bit 31 is 1. + while (read_nic_dword(dev, QPNR)&0x80000000) + { + // If FW can not finish RF-R/W for more than ?? times. We must reset FW. + if (time++ < 100) + { + //DbgPrint("FW not finish RF-W Time=%d\n\r", time); + udelay(10); + } + else + break; + } + // 7. No matter check bit. We always force the write. Because FW will + // not accept the command. + write_nic_dword(dev, QPNR, Data); + /* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware + to finish RF write operation. */ + /* 2008/01/17 MH We support delay in firmware side now. */ + //delay_us(20); + +} /* phy_FwRFSerialWrite */ + + +/****************************************************************************** + *function: This function read BB parameters from Header file we gen, + * and do register read/write + * input: dev + * output: none + * return: none + * notice: BB parameters may change all the time, so please make + * sure it has been synced with the newest. + * ***************************************************************************/ +void rtl8192_phy_configmac(struct net_device* dev) +{ + u32 dwArrayLen = 0, i; + u32* pdwArray = NULL; + struct r8192_priv *priv = ieee80211_priv(dev); + + if(priv->btxpowerdata_readfromEEPORM) + { + RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array_PG\n"); + dwArrayLen = MACPHY_Array_PGLength; + pdwArray = rtl819XMACPHY_Array_PG; + + } + else + { + RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array\n"); + dwArrayLen = MACPHY_ArrayLength; + pdwArray = rtl819XMACPHY_Array; + } + for(i = 0; i<dwArrayLen; i=i+3){ + if(pdwArray[i] == 0x318) + { + pdwArray[i+2] = 0x00000800; + //DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n", + // ptrArray[i], ptrArray[i+1], ptrArray[i+2]); + } + + RT_TRACE(COMP_DBG, "The Rtl8190MACPHY_Array[0] is %x Rtl8190MACPHY_Array[1] is %x Rtl8190MACPHY_Array[2] is %x\n", + pdwArray[i], pdwArray[i+1], pdwArray[i+2]); + rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], pdwArray[i+2]); + } + return; + +} + +/****************************************************************************** + *function: This function do dirty work + * input: dev + * output: none + * return: none + * notice: BB parameters may change all the time, so please make + * sure it has been synced with the newest. + * ***************************************************************************/ + +void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType) +{ + u32 i; + +#ifdef TO_DO_LIST + u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL; + if(Adapter->bInHctTest) + { + PHY_REGArrayLen = PHY_REGArrayLengthDTM; + AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM; + Rtl8190PHY_REGArray_Table = Rtl819XPHY_REGArrayDTM; + Rtl8190AGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM; + } +#endif + if (ConfigType == BaseBand_Config_PHY_REG) + { + for (i=0; i<PHY_REG_1T2RArrayLength; i+=2) + { + rtl8192_setBBreg(dev, rtl819XPHY_REG_1T2RArray[i], bMaskDWord, rtl819XPHY_REG_1T2RArray[i+1]); + RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x \n",i, rtl819XPHY_REG_1T2RArray[i], rtl819XPHY_REG_1T2RArray[i+1]); + } + } + else if (ConfigType == BaseBand_Config_AGC_TAB) + { + for (i=0; i<AGCTAB_ArrayLength; i+=2) + { + rtl8192_setBBreg(dev, rtl819XAGCTAB_Array[i], bMaskDWord, rtl819XAGCTAB_Array[i+1]); + RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x \n",i, rtl819XAGCTAB_Array[i], rtl819XAGCTAB_Array[i+1]); + } + } + return; + + +} +/****************************************************************************** + *function: This function initialize Register definition offset for Radio Path + * A/B/C/D + * input: net_device dev + * output: none + * return: none + * notice: Initialization value here is constant and it should never be changed + * ***************************************************************************/ +void rtl8192_InitBBRFRegDef(struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); +// RF Interface Sowrtware Control + priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870 + priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) + priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874 + priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) + + // RF Interface Readback Value + priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0 + priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) + priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4 + priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) + + // RF Interface Output (and Enable) + priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860 + priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864 + priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x868 + priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x86C + + // RF Interface (Output and) Enable + priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) + priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) + priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A) + priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E) + + //Addr of LSSI. Wirte RF register by driver + priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter + priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; + priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter; + priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter; + + // RF parameter + priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; //BB Band Select + priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter; + priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter; + priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter; + + // Tx AGC Gain Stage (same for all path. Should we remove this?) + priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + + // Tranceiver A~D HSSI Parameter-1 + priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; //wire control parameter1 + priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; //wire control parameter1 + priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1; //wire control parameter1 + priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1; //wire control parameter1 + + // Tranceiver A~D HSSI Parameter-2 + priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; //wire control parameter2 + priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; //wire control parameter2 + priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2; //wire control parameter2 + priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2; //wire control parameter1 + + // RF switch Control + priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control + priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl; + priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl; + priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl; + + // AGC control 1 + priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1; + priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1; + priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1; + priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1; + + // AGC control 2 + priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2; + priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2; + priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2; + priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2; + + // RX AFE control 1 + priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance; + priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance; + priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance; + priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance; + + // RX AFE control 1 + priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE; + priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE; + priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE; + priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE; + + // Tx AFE control 1 + priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance; + priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance; + priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance; + priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance; + + // Tx AFE control 2 + priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE; + priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE; + priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE; + priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE; + + // Tranceiver LSSI Readback + priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack; + +} +/****************************************************************************** + *function: This function is to write register and then readback to make sure whether BB and RF is OK + * input: net_device dev + * HW90_BLOCK_E CheckBlock + * RF90_RADIO_PATH_E eRFPath //only used when checkblock is HW90_BLOCK_RF + * output: none + * return: return whether BB and RF is ok(0:OK; 1:Fail) + * notice: This function may be removed in the ASIC + * ***************************************************************************/ +u8 rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath) +{ +// struct r8192_priv *priv = ieee80211_priv(dev); +// BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; + u8 ret = 0; + u32 i, CheckTimes = 4, dwRegRead = 0; + u32 WriteAddr[4]; + u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f}; + // Initialize register address offset to be checked + WriteAddr[HW90_BLOCK_MAC] = 0x100; + WriteAddr[HW90_BLOCK_PHY0] = 0x900; + WriteAddr[HW90_BLOCK_PHY1] = 0x800; + WriteAddr[HW90_BLOCK_RF] = 0x3; + RT_TRACE(COMP_PHY, "=======>%s(), CheckBlock:%d\n", __FUNCTION__, CheckBlock); + for(i=0 ; i < CheckTimes ; i++) + { + + // + // Write Data to register and readback + // + switch(CheckBlock) + { + case HW90_BLOCK_MAC: + RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!"); + break; + + case HW90_BLOCK_PHY0: + case HW90_BLOCK_PHY1: + write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]); + dwRegRead = read_nic_dword(dev, WriteAddr[CheckBlock]); + break; + + case HW90_BLOCK_RF: + WriteData[i] &= 0xfff; + rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]); + // TODO: we should not delay for such a long time. Ask SD3 + msleep(1); + dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits); + msleep(1); + break; + + default: + ret = 1; + break; + } + + + // + // Check whether readback data is correct + // + if(dwRegRead != WriteData[i]) + { + RT_TRACE((COMP_PHY|COMP_ERR), "====>error=====dwRegRead: %x, WriteData: %x \n", dwRegRead, WriteData[i]); + ret = 1; + break; + } + } + + return ret; +} + + +/****************************************************************************** + *function: This function initialize BB&RF + * input: net_device dev + * output: none + * return: none + * notice: Initialization value may change all the time, so please make + * sure it has been synced with the newest. + * ***************************************************************************/ +void rtl8192_BB_Config_ParaFile(struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 bRegValue = 0, eCheckItem = 0, rtStatus = 0; + u32 dwRegValue = 0; + /************************************** + //<1>Initialize BaseBand + **************************************/ + + /*--set BB Global Reset--*/ + bRegValue = read_nic_byte(dev, BB_GLOBAL_RESET); + write_nic_byte(dev, BB_GLOBAL_RESET,(bRegValue|BB_GLOBAL_RESET_BIT)); + mdelay(50); + /*---set BB reset Active---*/ + dwRegValue = read_nic_dword(dev, CPU_GEN); + write_nic_dword(dev, CPU_GEN, (dwRegValue&(~CPU_GEN_BB_RST))); + + /*----Ckeck FPGAPHY0 and PHY1 board is OK----*/ + // TODO: this function should be removed on ASIC , Emily 2007.2.2 + for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++) + { + rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path + if(rtStatus != 0) + { + RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1); + return ; + } + } + /*---- Set CCK and OFDM Block "OFF"----*/ + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0); + /*----BB Register Initilazation----*/ + //==m==>Set PHY REG From Header<==m== + rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG); + + /*----Set BB reset de-Active----*/ + dwRegValue = read_nic_dword(dev, CPU_GEN); + write_nic_dword(dev, CPU_GEN, (dwRegValue|CPU_GEN_BB_RST)); + + /*----BB AGC table Initialization----*/ + //==m==>Set PHY REG From Header<==m== + rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB); + + /*----Enable XSTAL ----*/ + write_nic_byte_E(dev, 0x5e, 0x00); + if (priv->card_8192_version == (u8)VERSION_819xU_A) + { + //Antenna gain offset from B/C/D to A + dwRegValue = (priv->AntennaTxPwDiff[1]<<4 | priv->AntennaTxPwDiff[0]); + rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), dwRegValue); + + //XSTALLCap + dwRegValue = priv->CrystalCap & 0xf; + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap, dwRegValue); + } + + // Check if the CCK HighPower is turned ON. + // This is used to calculate PWDB. + priv->bCckHighPower = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200)); + return; +} +/****************************************************************************** + *function: This function initialize BB&RF + * input: net_device dev + * output: none + * return: none + * notice: Initialization value may change all the time, so please make + * sure it has been synced with the newest. + * ***************************************************************************/ +void rtl8192_BBConfig(struct net_device* dev) +{ + rtl8192_InitBBRFRegDef(dev); + //config BB&RF. As hardCode based initialization has not been well + //implemented, so use file first.FIXME:should implement it for hardcode? + rtl8192_BB_Config_ParaFile(dev); + return; +} + +/****************************************************************************** + *function: This function obtains the initialization value of Tx power Level offset + * input: net_device dev + * output: none + * return: none + * ***************************************************************************/ +void rtl8192_phy_getTxPower(struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + priv->MCSTxPowerLevelOriginalOffset[0] = + read_nic_dword(dev, rTxAGC_Rate18_06); + priv->MCSTxPowerLevelOriginalOffset[1] = + read_nic_dword(dev, rTxAGC_Rate54_24); + priv->MCSTxPowerLevelOriginalOffset[2] = + read_nic_dword(dev, rTxAGC_Mcs03_Mcs00); + priv->MCSTxPowerLevelOriginalOffset[3] = + read_nic_dword(dev, rTxAGC_Mcs07_Mcs04); + priv->MCSTxPowerLevelOriginalOffset[4] = + read_nic_dword(dev, rTxAGC_Mcs11_Mcs08); + priv->MCSTxPowerLevelOriginalOffset[5] = + read_nic_dword(dev, rTxAGC_Mcs15_Mcs12); + + // read rx initial gain + priv->DefaultInitialGain[0] = read_nic_byte(dev, rOFDM0_XAAGCCore1); + priv->DefaultInitialGain[1] = read_nic_byte(dev, rOFDM0_XBAGCCore1); + priv->DefaultInitialGain[2] = read_nic_byte(dev, rOFDM0_XCAGCCore1); + priv->DefaultInitialGain[3] = read_nic_byte(dev, rOFDM0_XDAGCCore1); + RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n", + priv->DefaultInitialGain[0], priv->DefaultInitialGain[1], + priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]); + + // read framesync + priv->framesync = read_nic_byte(dev, rOFDM0_RxDetector3); + priv->framesyncC34 = read_nic_byte(dev, rOFDM0_RxDetector2); + RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n", + rOFDM0_RxDetector3, priv->framesync); + + // read SIFS (save the value read fome MACPHY_REG.txt) + priv->SifsTime = read_nic_word(dev, SIFS); + + return; +} + +/****************************************************************************** + *function: This function obtains the initialization value of Tx power Level offset + * input: net_device dev + * output: none + * return: none + * ***************************************************************************/ +void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 powerlevel = priv->TxPowerLevelCCK[channel-1]; + u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; + + switch(priv->rf_chip) + { + case RF_8256: + PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement + PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); + break; + default: +// case RF_8225: +// case RF_8258: + RT_TRACE((COMP_PHY|COMP_ERR), "error RF chipID(8225 or 8258) in function %s()\n", __FUNCTION__); + break; + } + return; +} + +/****************************************************************************** + *function: This function check Rf chip to do RF config + * input: net_device dev + * output: none + * return: only 8256 is supported + * ***************************************************************************/ +void rtl8192_phy_RFConfig(struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + switch(priv->rf_chip) + { + case RF_8256: + PHY_RF8256_Config(dev); + break; + // case RF_8225: + // case RF_8258: + default: + RT_TRACE(COMP_ERR, "error chip id\n"); + break; + } + return; +} + +/****************************************************************************** + *function: This function update Initial gain + * input: net_device dev + * output: none + * return: As Windows has not implemented this, wait for complement + * ***************************************************************************/ +void rtl8192_phy_updateInitGain(struct net_device* dev) +{ + return; +} + +/****************************************************************************** + *function: This function read RF parameters from general head file, and do RF 3-wire + * input: net_device dev + * output: none + * return: return code show if RF configuration is successful(0:pass, 1:fail) + * Note: Delay may be required for RF configuration + * ***************************************************************************/ +u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E eRFPath) +{ + + int i; + //u32* pRFArray; + u8 ret = 0; + + switch(eRFPath){ + case RF90_PATH_A: + for(i = 0;i<RadioA_ArrayLength; i=i+2){ + + if(rtl819XRadioA_Array[i] == 0xfe){ + mdelay(100); + continue; + } + rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioA_Array[i], bMask12Bits, rtl819XRadioA_Array[i+1]); + mdelay(1); + + } + break; + case RF90_PATH_B: + for(i = 0;i<RadioB_ArrayLength; i=i+2){ + + if(rtl819XRadioB_Array[i] == 0xfe){ + mdelay(100); + continue; + } + rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioB_Array[i], bMask12Bits, rtl819XRadioB_Array[i+1]); + mdelay(1); + + } + break; + case RF90_PATH_C: + for(i = 0;i<RadioC_ArrayLength; i=i+2){ + + if(rtl819XRadioC_Array[i] == 0xfe){ + mdelay(100); + continue; + } + rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioC_Array[i], bMask12Bits, rtl819XRadioC_Array[i+1]); + mdelay(1); + + } + break; + case RF90_PATH_D: + for(i = 0;i<RadioD_ArrayLength; i=i+2){ + + if(rtl819XRadioD_Array[i] == 0xfe){ + mdelay(100); + continue; + } + rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioD_Array[i], bMask12Bits, rtl819XRadioD_Array[i+1]); + mdelay(1); + + } + break; + default: + break; + } + + return ret;; + +} +/****************************************************************************** + *function: This function set Tx Power of the channel + * input: struct net_device *dev + * u8 channel + * output: none + * return: none + * Note: + * ***************************************************************************/ +void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 powerlevel = priv->TxPowerLevelCCK[channel-1]; + u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; + + switch(priv->rf_chip) + { + case RF_8225: +#ifdef TO_DO_LIST + PHY_SetRF8225CckTxPower(Adapter, powerlevel); + PHY_SetRF8225OfdmTxPower(Adapter, powerlevelOFDM24G); +#endif + break; + + case RF_8256: + PHY_SetRF8256CCKTxPower(dev, powerlevel); + PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); + break; + + case RF_8258: + break; + default: + RT_TRACE(COMP_ERR, "unknown rf chip ID in rtl8192_SetTxPowerLevel()\n"); + break; + } + return; +} + +/****************************************************************************** + *function: This function set RF state on or off + * input: struct net_device *dev + * RT_RF_POWER_STATE eRFPowerState //Power State to set + * output: none + * return: none + * Note: + * ***************************************************************************/ +bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState) +{ + bool bResult = true; +// u8 eRFPath; + struct r8192_priv *priv = ieee80211_priv(dev); + + if(eRFPowerState == priv->ieee80211->eRFPowerState) + return false; + + if(priv->SetRFPowerStateInProgress == true) + return false; + + priv->SetRFPowerStateInProgress = true; + + switch(priv->rf_chip) + { + case RF_8256: + switch( eRFPowerState ) + { + case eRfOn: + //RF-A, RF-B + //enable RF-Chip A/B + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4] + //analog to digital on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8] + //digital to analog on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3] + //rx antenna on + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0] + //rx antenna on + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0] + //analog to digital part2 on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5] + + break; + + case eRfSleep: + + break; + + case eRfOff: + //RF-A, RF-B + //disable RF-Chip A/B + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4] + //analog to digital off, for power save + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] + //digital to analog off, for power save + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0); // 0x880[4:3] + //rx antenna off + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0] + //rx antenna off + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0] + //analog to digital part2 off, for power save + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5] + + break; + + default: + bResult = false; + RT_TRACE(COMP_ERR, "SetRFPowerState819xUsb(): unknow state to set: 0x%X!!!\n", eRFPowerState); + break; + } + break; + default: + RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip); + break; + } +#ifdef TO_DO_LIST + if(bResult) + { + // Update current RF state variable. + pHalData->eRFPowerState = eRFPowerState; + switch(pHalData->RFChipID ) + { + case RF_8256: + switch(pHalData->eRFPowerState) + { + case eRfOff: + // + //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015 + // + if(pMgntInfo->RfOffReason==RF_CHANGE_BY_IPS ) + { + Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK); + } + else + { + // Turn off LED if RF is not ON. + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF); + } + break; + + case eRfOn: + // Turn on RF we are still linked, which might happen when + // we quickly turn off and on HW RF. 2006.05.12, by rcnjko. + if( pMgntInfo->bMediaConnect == TRUE ) + { + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK); + } + else + { + // Turn off LED if RF is not ON. + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); + } + break; + + default: + // do nothing. + break; + }// Switch RF state + break; + + default: + RT_TRACE(COMP_RF, DBG_LOUD, ("SetRFPowerState8190(): Unknown RF type\n")); + break; + } + + } +#endif + priv->SetRFPowerStateInProgress = false; + + return bResult; +} + +/**************************************************************************************** + *function: This function set command table variable(struct SwChnlCmd). + * input: SwChnlCmd* CmdTable //table to be set. + * u32 CmdTableIdx //variable index in table to be set + * u32 CmdTableSz //table size. + * SwChnlCmdID CmdID //command ID to set. + * u32 Para1 + * u32 Para2 + * u32 msDelay + * output: + * return: true if finished, false otherwise + * Note: + * ************************************************************************************/ +u8 rtl8192_phy_SetSwChnlCmdArray( + SwChnlCmd* CmdTable, + u32 CmdTableIdx, + u32 CmdTableSz, + SwChnlCmdID CmdID, + u32 Para1, + u32 Para2, + u32 msDelay + ) +{ + SwChnlCmd* pCmd; + + if(CmdTable == NULL) + { + RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n"); + return false; + } + if(CmdTableIdx >= CmdTableSz) + { + RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n", + CmdTableIdx, CmdTableSz); + return false; + } + + pCmd = CmdTable + CmdTableIdx; + pCmd->CmdID = CmdID; + pCmd->Para1 = Para1; + pCmd->Para2 = Para2; + pCmd->msDelay = msDelay; + + return true; +} +/****************************************************************************** + *function: This function set channel step by step + * input: struct net_device *dev + * u8 channel + * u8* stage //3 stages + * u8* step // + * u32* delay //whether need to delay + * output: store new stage, step and delay for next step(combine with function above) + * return: true if finished, false otherwise + * Note: Wait for simpler function to replace it //wb + * ***************************************************************************/ +u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u8* step, u32* delay) +{ + struct r8192_priv *priv = ieee80211_priv(dev); +// PCHANNEL_ACCESS_SETTING pChnlAccessSetting; + SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; + u32 PreCommonCmdCnt; + SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; + u32 PostCommonCmdCnt; + SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; + u32 RfDependCmdCnt; + SwChnlCmd *CurrentCmd = NULL; + //RF90_RADIO_PATH_E eRFPath; + u8 eRFPath; +// u32 RfRetVal; +// u8 RetryCnt; + + RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel); +// RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel)); +#ifdef ENABLE_DOT11D + if (!IsLegalChannel(priv->ieee80211, channel)) + { + RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel); + return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop. + } +#endif +//FIXME:need to check whether channel is legal or not here.WB + + + //for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++) +// for(eRFPath = 0; eRFPath <RF90_PATH_MAX; eRFPath++) +// { +// if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) +// continue; + // <1> Fill up pre common command. + PreCommonCmdCnt = 0; + rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, + CmdID_SetTxPowerLevel, 0, 0, 0); + rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, + CmdID_End, 0, 0, 0); + + // <2> Fill up post common command. + PostCommonCmdCnt = 0; + + rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT, + CmdID_End, 0, 0, 0); + + // <3> Fill up RF dependent command. + RfDependCmdCnt = 0; + switch( priv->rf_chip ) + { + case RF_8225: + if (!(channel >= 1 && channel <= 14)) + { + RT_TRACE(COMP_ERR, "illegal channel for Zebra 8225: %d\n", channel); + return true; + } + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, rZebra1_Channel, RF_CHANNEL_TABLE_ZEBRA[channel], 10); + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_8256: + // TEST!! This is not the table for 8256!! + if (!(channel >= 1 && channel <= 14)) + { + RT_TRACE(COMP_ERR, "illegal channel for Zebra 8256: %d\n", channel); + return true; + } + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, rZebra1_Channel, channel, 10); + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_8258: + break; + + default: + RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); + return true; + break; + } + + + do{ + switch(*stage) + { + case 0: + CurrentCmd=&PreCommonCmd[*step]; + break; + case 1: + CurrentCmd=&RfDependCmd[*step]; + break; + case 2: + CurrentCmd=&PostCommonCmd[*step]; + break; + } + + if(CurrentCmd->CmdID==CmdID_End) + { + if((*stage)==2) + { + (*delay)=CurrentCmd->msDelay; + return true; + } + else + { + (*stage)++; + (*step)=0; + continue; + } + } + + switch(CurrentCmd->CmdID) + { + case CmdID_SetTxPowerLevel: + if(priv->card_8192_version == (u8)VERSION_819xU_A) //xiong: consider it later! + rtl8192_SetTxPowerLevel(dev,channel); + break; + case CmdID_WritePortUlong: + write_nic_dword(dev, CurrentCmd->Para1, CurrentCmd->Para2); + break; + case CmdID_WritePortUshort: + write_nic_word(dev, CurrentCmd->Para1, (u16)CurrentCmd->Para2); + break; + case CmdID_WritePortUchar: + write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2); + break; + case CmdID_RF_WriteReg: + for(eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) + { + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bZebra1_ChannelNum, CurrentCmd->Para2); + } + break; + default: + break; + } + + break; + }while(true); +// }/*for(Number of RF paths)*/ + + (*delay)=CurrentCmd->msDelay; + (*step)++; + return false; +} + +/****************************************************************************** + *function: This function does acturally set channel work + * input: struct net_device *dev + * u8 channel + * output: none + * return: noin + * Note: We should not call this function directly + * ***************************************************************************/ +void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 delay = 0; + + while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) + { + // if(delay>0) + // msleep(delay);//or mdelay? need further consideration + if(!priv->up) + break; + } +} +/****************************************************************************** + *function: Callback routine of the work item for switch channel. + * input: + * + * output: none + * return: noin + * ***************************************************************************/ +void rtl8192_SwChnl_WorkItem(struct net_device *dev) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + + RT_TRACE(COMP_CH, "==> SwChnlCallback819xUsbWorkItem(), chan:%d\n", priv->chan); + + + rtl8192_phy_FinishSwChnlNow(dev , priv->chan); + + RT_TRACE(COMP_CH, "<== SwChnlCallback819xUsbWorkItem()\n"); +} + +/****************************************************************************** + *function: This function scheduled actural workitem to set channel + * input: net_device dev + * u8 channel //channel to set + * output: none + * return: return code show if workitem is scheduled(1:pass, 0:fail) + * Note: Delay may be required for RF configuration + * ***************************************************************************/ +u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + RT_TRACE(COMP_CH, "=====>%s(), SwChnlInProgress:%d\n", __FUNCTION__, priv->SwChnlInProgress); + if(!priv->up) + return false; + if(priv->SwChnlInProgress) + return false; + +// if(pHalData->SetBWModeInProgress) +// return; +if (0) //to test current channel from RF reg 0x7. +{ + u8 eRFPath; + for(eRFPath = 0; eRFPath < 2; eRFPath++){ + printk("====>set channel:%x\n",rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x7, bZebra1_ChannelNum)); + udelay(10); + } +} + //-------------------------------------------- + switch(priv->ieee80211->mode) + { + case WIRELESS_MODE_A: + case WIRELESS_MODE_N_5G: + if (channel<=14){ + RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14"); + return false; + } + break; + case WIRELESS_MODE_B: + if (channel>14){ + RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14"); + return false; + } + break; + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + if (channel>14){ + RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14"); + return false; + } + break; + } + //-------------------------------------------- + + priv->SwChnlInProgress = true; + if(channel == 0) + channel = 1; + + priv->chan=channel; + + priv->SwChnlStage=0; + priv->SwChnlStep=0; +// schedule_work(&(priv->SwChnlWorkItem)); +// rtl8192_SwChnl_WorkItem(dev); + if(priv->up) { +// queue_work(priv->priv_wq,&(priv->SwChnlWorkItem)); + rtl8192_SwChnl_WorkItem(dev); + } + + priv->SwChnlInProgress = false; + return true; +} + + +// +/****************************************************************************** + *function: Callback routine of the work item for set bandwidth mode. + * input: struct net_device *dev + * HT_CHANNEL_WIDTH Bandwidth //20M or 40M + * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care + * output: none + * return: none + * Note: I doubt whether SetBWModeInProgress flag is necessary as we can + * test whether current work in the queue or not.//do I? + * ***************************************************************************/ +void rtl8192_SetBWModeWorkItem(struct net_device *dev) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + u8 regBwOpMode; + + RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem() Switch to %s bandwidth\n", \ + priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz") + + + if(priv->rf_chip == RF_PSEUDO_11N) + { + priv->SetBWModeInProgress= false; + return; + } + + //<1>Set MAC register + regBwOpMode = read_nic_byte(dev, BW_OPMODE); + + switch(priv->CurrentChannelBW) + { + case HT_CHANNEL_WIDTH_20: + regBwOpMode |= BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; + + case HT_CHANNEL_WIDTH_20_40: + regBwOpMode &= ~BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; + + default: + RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n",priv->CurrentChannelBW); + break; + } + + //<2>Set PHY related register + switch(priv->CurrentChannelBW) + { + case HT_CHANNEL_WIDTH_20: + // Add by Vivi 20071119 + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1); + + // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207 + priv->cck_present_attentuation = + priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference; + + if(priv->cck_present_attentuation > 22) + priv->cck_present_attentuation= 22; + if(priv->cck_present_attentuation< 0) + priv->cck_present_attentuation = 0; + RT_TRACE(COMP_INIT, "20M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation); + + if(priv->chan == 14 && !priv->bcck_in_ch14) + { + priv->bcck_in_ch14 = TRUE; + dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); + } + else if(priv->chan != 14 && priv->bcck_in_ch14) + { + priv->bcck_in_ch14 = FALSE; + dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); + } + else + dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); + + break; + case HT_CHANNEL_WIDTH_20_40: + // Add by Vivi 20071119 + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0); + rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); + priv->cck_present_attentuation = + priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference; + + if(priv->cck_present_attentuation > 22) + priv->cck_present_attentuation = 22; + if(priv->cck_present_attentuation < 0) + priv->cck_present_attentuation = 0; + + RT_TRACE(COMP_INIT, "40M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation); + if(priv->chan == 14 && !priv->bcck_in_ch14) + { + priv->bcck_in_ch14 = true; + dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); + } + else if(priv->chan!= 14 && priv->bcck_in_ch14) + { + priv->bcck_in_ch14 = false; + dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); + } + else + dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); + + break; + default: + RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n" ,priv->CurrentChannelBW); + break; + + } + //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 + + //<3>Set RF related register + switch( priv->rf_chip ) + { + case RF_8225: +#ifdef TO_DO_LIST + PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW); +#endif + break; + + case RF_8256: + PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_8258: + // PHY_SetRF8258Bandwidth(); + break; + + case RF_PSEUDO_11N: + // Do Nothing + break; + + default: + RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); + break; + } + priv->SetBWModeInProgress= false; + + RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb(), %d", atomic_read(&(priv->ieee80211->atm_swbw)) ); +} + +/****************************************************************************** + *function: This function schedules bandwith switch work. + * input: struct net_device *dev + * HT_CHANNEL_WIDTH Bandwidth //20M or 40M + * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care + * output: none + * return: none + * Note: I doubt whether SetBWModeInProgress flag is necessary as we can + * test whether current work in the queue or not.//do I? + * ***************************************************************************/ +void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + if(priv->SetBWModeInProgress) + return; + priv->SetBWModeInProgress= true; + + priv->CurrentChannelBW = Bandwidth; + + if(Offset==HT_EXTCHNL_OFFSET_LOWER) + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER; + else if(Offset==HT_EXTCHNL_OFFSET_UPPER) + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER; + else + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE; + + //queue_work(priv->priv_wq, &(priv->SetBWModeWorkItem)); + // schedule_work(&(priv->SetBWModeWorkItem)); + rtl8192_SetBWModeWorkItem(dev); + +} + +void InitialGain819xUsb(struct net_device *dev, u8 Operation) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + priv->InitialGainOperateType = Operation; + + if(priv->up) + { + queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0); + } +} + +extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) +{ + struct delayed_work *dwork = container_of(work,struct delayed_work,work); + struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq); + struct net_device *dev = priv->ieee80211->dev; +#define SCAN_RX_INITIAL_GAIN 0x17 +#define POWER_DETECTION_TH 0x08 + u32 BitMask; + u8 initial_gain; + u8 Operation; + + Operation = priv->InitialGainOperateType; + + switch(Operation) + { + case IG_Backup: + RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n"); + initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];// + BitMask = bMaskByte0; + if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF + priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask); + priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask); + priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask); + priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask); + BitMask = bMaskByte2; + priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask); + + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca); + + RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", initial_gain); + write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); + RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", POWER_DETECTION_TH); + write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH); + break; + case IG_Restore: + RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n"); + BitMask = 0x7f; //Bit0~ Bit6 + if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF + + rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1); + rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1); + rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1); + rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1); + BitMask = bMaskByte2; + rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca); + + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca); + +#ifdef RTL8190P + SetTxPowerLevel8190(Adapter,priv->CurrentChannel); +#endif +#ifdef RTL8192E + SetTxPowerLevel8190(Adapter,priv->CurrentChannel); +#endif +//#ifdef RTL8192U + rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel); +//#endif + + if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON + break; + default: + RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n"); + break; + } +} + |