diff options
Diffstat (limited to 'drivers/staging/rtl8192su/r8192S_rtl8225.c')
| -rw-r--r-- | drivers/staging/rtl8192su/r8192S_rtl8225.c | 292 |
1 files changed, 0 insertions, 292 deletions
diff --git a/drivers/staging/rtl8192su/r8192S_rtl8225.c b/drivers/staging/rtl8192su/r8192S_rtl8225.c deleted file mode 100644 index 09465df..0000000 --- a/drivers/staging/rtl8192su/r8192S_rtl8225.c +++ /dev/null @@ -1,292 +0,0 @@ - -#include "r8192U.h" -#include "r8192S_hw.h" -#include "r8192S_phyreg.h" -#include "r8192S_phy.h" -#include "r8192S_rtl8225.h" - -/*---------------------Define local function prototype-----------------------*/ -void phy_RF8225_Config_HardCode(struct net_device* dev ); -bool phy_RF8225_Config_ParaFile(struct net_device* dev ); -/*---------------------Define local function prototype-----------------------*/ -void PHY_SetRF8225OfdmTxPower(struct net_device* dev ,u8 powerlevel) -{ - -} - - - -void PHY_SetRF8225CckTxPower( struct net_device* dev , u8 powerlevel) -{ - -} - - -// TODO: The following RF 022D related function should be removed to HalPhy0222D.c. -void PHY_SetRF0222DOfdmTxPower(struct net_device* dev ,u8 powerlevel) -{ - //TODO: We should set RF TxPower for RF 0222D here!! -} - - - -void PHY_SetRF0222DCckTxPower(struct net_device* dev ,u8 powerlevel) -{ - //TODO: We should set RF TxPower for RF 0222D here!! -} - - -/*----------------------------------------------------------------------------- - * Function: PHY_SetRF0222DBandwidth() - * - * Overview: This function is called by SetBWModeCallback8190Pci() only - * - * Input: PADAPTER Adapter - * WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M - * - * Output: NONE - * - * Return: NONE - * - * Note: For RF type 0222D - *---------------------------------------------------------------------------*/ - //just in phy -void PHY_SetRF0222DBandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) //20M or 40M -{ - u8 eRFPath; - struct r8192_priv *priv = ieee80211_priv(dev); - - - //if (IS_HARDWARE_TYPE_8192S(dev)) - if (1) - { -#ifndef RTL92SE_FPGA_VERIFY - switch(Bandwidth) - { - case HT_CHANNEL_WIDTH_20: -#ifdef FIB_MODIFICATION - write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58); -#endif - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, BIT10|BIT11, 0x01); - break; - case HT_CHANNEL_WIDTH_20_40: -#ifdef FIB_MODIFICATION - write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18); -#endif - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, BIT10|BIT11, 0x00); - break; - default: - ;//RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth )); - break; - } -#endif - } - else - { - for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) - { - switch(Bandwidth) - { - case HT_CHANNEL_WIDTH_20: - //rtl8192_phy_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x01); - break; - case HT_CHANNEL_WIDTH_20_40: - //rtl8192_phy_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x00); - break; - default: - ;//RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth )); - break; - - } - } - } - -} - -// TODO: Aabove RF 022D related function should be removed to HalPhy0222D.c. - -/*----------------------------------------------------------------------------- - * Function: PHY_SetRF8225Bandwidth() - * - * Overview: This function is called by SetBWModeCallback8190Pci() only - * - * Input: PADAPTER Adapter - * WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M - * - * Output: NONE - * - * Return: NONE - * - * Note: 8225(zebra1) support 20M only - *---------------------------------------------------------------------------*/ - //just in phy -void PHY_SetRF8225Bandwidth(struct net_device* dev ,HT_CHANNEL_WIDTH Bandwidth) //20M or 40M -{ - u8 eRFPath; - struct r8192_priv *priv = ieee80211_priv(dev); - - //for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++) - for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) - { - switch(Bandwidth) - { - case HT_CHANNEL_WIDTH_20: - // TODO: Update the parameters here - break; - case HT_CHANNEL_WIDTH_20_40: - RT_TRACE(COMP_DBG, "SetChannelBandwidth8190Pci():8225 does not support 40M mode\n"); - break; - default: - RT_TRACE(COMP_DBG, "PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth ); - break; - - } - } - -} - -//just in phy -bool PHY_RF8225_Config(struct net_device* dev ) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - bool rtStatus = true; - //RF90_RADIO_PATH_E eRFPath; - //BB_REGISTER_DEFINITION_T *pPhyReg; - //u32 OrgStoreRFIntSW[RF90_PATH_D+1]; - - // - // Initialize general global value - // - // TODO: Extend RF_PATH_C and RF_PATH_D in the future - priv->NumTotalRFPath = 2; - - // - // Config BB and RF - // - //switch( Adapter->MgntInfo.bRegHwParaFile ) - //{ - // case 0: - // phy_RF8225_Config_HardCode(dev); - // break; - - // case 1: - // rtStatus = phy_RF8225_Config_ParaFile(dev); - // break; - - // case 2: - // Partial Modify. - phy_RF8225_Config_HardCode(dev); - phy_RF8225_Config_ParaFile(dev); - // break; - - // default: - // phy_RF8225_Config_HardCode(dev); - // break; - //} - return rtStatus; - -} - -//just in 8225 -void phy_RF8225_Config_HardCode(struct net_device* dev) -{ - - // Set Default Bandwidth to 20M - //Adapter->HalFunc .SetBWModeHandler(Adapter, HT_CHANNEL_WIDTH_20); - - // TODO: Set Default Channel to channel one for RTL8225 - -} - -//just in 8225 -bool phy_RF8225_Config_ParaFile(struct net_device* dev) -{ - u32 u4RegValue = 0; - //static char szRadioAFile[] = RTL819X_PHY_RADIO_A; - //static char szRadioBFile[] = RTL819X_PHY_RADIO_B; - u8 eRFPath; - bool rtStatus = true; - struct r8192_priv *priv = ieee80211_priv(dev); - BB_REGISTER_DEFINITION_T *pPhyReg; - //u8 eCheckItem; - -#if 1 - //3//----------------------------------------------------------------- - //3// <2> Initialize RF - //3//----------------------------------------------------------------- - //for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++) - for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) - { - - pPhyReg = &priv->PHYRegDef[eRFPath]; - - /*----Store original RFENV control type----*/ - switch(eRFPath) - { - case RF90_PATH_A: - case RF90_PATH_C: - u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV); - break; - case RF90_PATH_B : - case RF90_PATH_D: - u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16); - break; - } - - /*----Set RF_ENV enable----*/ - rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1); - - /*----Set RF_ENV output high----*/ - rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1); - - /* Set bit number of Address and Data for RF register */ - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 1 to 4 bits for 8255 - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for 8255 - - - /*----Initialize RF fom connfiguration file----*/ - switch(eRFPath) - { - case RF90_PATH_A: - //rtStatus = PHY_ConfigRFWithParaFile(dev, (char* )&szRadioAFile, (RF90_RADIO_PATH_E)eRFPath); - rtStatus = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); - break; - case RF90_PATH_B: - //rtStatus = PHY_ConfigRFWithParaFile(dev, (char* )&szRadioBFile, (RF90_RADIO_PATH_E)eRFPath); - rtStatus = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); - break; - case RF90_PATH_C: - break; - case RF90_PATH_D: - break; - } - - /*----Restore RFENV control type----*/; - switch(eRFPath) - { - case RF90_PATH_A: - case RF90_PATH_C: - rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue); - break; - case RF90_PATH_B : - case RF90_PATH_D: - rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue); - break; - } - - if(rtStatus == false){ - //RT_TRACE(COMP_FPGA, DBG_LOUD, ("phy_RF8225_Config_ParaFile():Radio[%d] Fail!!", eRFPath)); - goto phy_RF8225_Config_ParaFile_Fail; - } - - } - - //RT_TRACE(COMP_INIT, DBG_LOUD, ("<---phy_RF8225_Config_ParaFile()\n")); - return rtStatus; - -phy_RF8225_Config_ParaFile_Fail: -#endif - return rtStatus; -} - - |
