diff options
Diffstat (limited to 'drivers/staging/rtl8192su/r8192S_phyreg.h')
| -rw-r--r-- | drivers/staging/rtl8192su/r8192S_phyreg.h | 1033 |
1 files changed, 0 insertions, 1033 deletions
diff --git a/drivers/staging/rtl8192su/r8192S_phyreg.h b/drivers/staging/rtl8192su/r8192S_phyreg.h deleted file mode 100644 index 2e4d76d..0000000 --- a/drivers/staging/rtl8192su/r8192S_phyreg.h +++ /dev/null @@ -1,1033 +0,0 @@ -/***************************************************************************** - * Copyright(c) 2008, RealTEK Technology Inc. All Right Reserved. - * - * Module: __INC_HAL8192SPHYREG_H - * - * - * Note: 1. Define PMAC/BB register map - * 2. Define RF register map - * 3. PMAC/BB register bit mask. - * 4. RF reg bit mask. - * 5. Other BB/RF relative definition. - * - * - * Export: Constants, macro, functions(API), global variables(None). - * - * Abbrev: - * - * History: - * Data Who Remark - * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h. - * 2. Reorganize code architecture. - * 09/25/2008 MH 1. Add RL6052 register definition - * - *****************************************************************************/ -#ifndef __INC_HAL8192SPHYREG_H -#define __INC_HAL8192SPHYREG_H - - -/*--------------------------Define Parameters-------------------------------*/ - -//============================================================ -// 8192S Regsiter offset definition -//============================================================ - -// -// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF -// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF -// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 -// 3. RF register 0x00-2E -// 4. Bit Mask for BB/RF register -// 5. Other definition for BB/RF R/W -// - - -// -// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF -// 1. Page1(0x100) -// -#define rPMAC_Reset 0x100 -#define rPMAC_TxStart 0x104 -#define rPMAC_TxLegacySIG 0x108 -#define rPMAC_TxHTSIG1 0x10c -#define rPMAC_TxHTSIG2 0x110 -#define rPMAC_PHYDebug 0x114 -#define rPMAC_TxPacketNum 0x118 -#define rPMAC_TxIdle 0x11c -#define rPMAC_TxMACHeader0 0x120 -#define rPMAC_TxMACHeader1 0x124 -#define rPMAC_TxMACHeader2 0x128 -#define rPMAC_TxMACHeader3 0x12c -#define rPMAC_TxMACHeader4 0x130 -#define rPMAC_TxMACHeader5 0x134 -#define rPMAC_TxDataType 0x138 -#define rPMAC_TxRandomSeed 0x13c -#define rPMAC_CCKPLCPPreamble 0x140 -#define rPMAC_CCKPLCPHeader 0x144 -#define rPMAC_CCKCRC16 0x148 -#define rPMAC_OFDMRxCRC32OK 0x170 -#define rPMAC_OFDMRxCRC32Er 0x174 -#define rPMAC_OFDMRxParityEr 0x178 -#define rPMAC_OFDMRxCRC8Er 0x17c -#define rPMAC_CCKCRxRC16Er 0x180 -#define rPMAC_CCKCRxRC32Er 0x184 -#define rPMAC_CCKCRxRC32OK 0x188 -#define rPMAC_TxStatus 0x18c - -// -// 2. Page2(0x200) -// -// The following two definition are only used for USB interface. -#define RF_BB_CMD_ADDR 0x02c0 // RF/BB read/write command address. -#define RF_BB_CMD_DATA 0x02c4 // RF/BB read/write command data. - -// -// 3. Page8(0x800) -// -#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC // RF BW Setting?? - -#define rFPGA0_TxInfo 0x804 // Status report?? -#define rFPGA0_PSDFunction 0x808 - -#define rFPGA0_TxGainStage 0x80c // Set TX PWR init gain? - -#define rFPGA0_RFTiming1 0x810 // Useless now -#define rFPGA0_RFTiming2 0x814 -//#define rFPGA0_XC_RFTiming 0x818 -//#define rFPGA0_XD_RFTiming 0x81c - -#define rFPGA0_XA_HSSIParameter1 0x820 // RF 3 wire register -#define rFPGA0_XA_HSSIParameter2 0x824 -#define rFPGA0_XB_HSSIParameter1 0x828 -#define rFPGA0_XB_HSSIParameter2 0x82c -#define rFPGA0_XC_HSSIParameter1 0x830 -#define rFPGA0_XC_HSSIParameter2 0x834 -#define rFPGA0_XD_HSSIParameter1 0x838 -#define rFPGA0_XD_HSSIParameter2 0x83c -#define rFPGA0_XA_LSSIParameter 0x840 -#define rFPGA0_XB_LSSIParameter 0x844 -#define rFPGA0_XC_LSSIParameter 0x848 -#define rFPGA0_XD_LSSIParameter 0x84c - -#define rFPGA0_RFWakeUpParameter 0x850 // Useless now -#define rFPGA0_RFSleepUpParameter 0x854 - -#define rFPGA0_XAB_SwitchControl 0x858 // RF Channel switch -#define rFPGA0_XCD_SwitchControl 0x85c - -#define rFPGA0_XA_RFInterfaceOE 0x860 // RF Channel switch -#define rFPGA0_XB_RFInterfaceOE 0x864 -#define rFPGA0_XC_RFInterfaceOE 0x868 -#define rFPGA0_XD_RFInterfaceOE 0x86c - -#define rFPGA0_XAB_RFInterfaceSW 0x870 // RF Interface Software Control -#define rFPGA0_XCD_RFInterfaceSW 0x874 - -#define rFPGA0_XAB_RFParameter 0x878 // RF Parameter -#define rFPGA0_XCD_RFParameter 0x87c - -#define rFPGA0_AnalogParameter1 0x880 // Crystal cap setting RF-R/W protection for parameter4?? -#define rFPGA0_AnalogParameter2 0x884 -#define rFPGA0_AnalogParameter3 0x888 // Useless now -#define rFPGA0_AnalogParameter4 0x88c - -#define rFPGA0_XA_LSSIReadBack 0x8a0 // Tranceiver LSSI Readback -#define rFPGA0_XB_LSSIReadBack 0x8a4 -#define rFPGA0_XC_LSSIReadBack 0x8a8 -#define rFPGA0_XD_LSSIReadBack 0x8ac - -#define rFPGA0_PSDReport 0x8b4 // Useless now -#define TransceiverA_HSPI_Readback 0x8b8 // Transceiver A HSPI Readback -#define TransceiverB_HSPI_Readback 0x8bc // Transceiver B HSPI Readback -#define rFPGA0_XAB_RFInterfaceRB 0x8e0 // Useless now // RF Interface Readback Value -#define rFPGA0_XCD_RFInterfaceRB 0x8e4 // Useless now - -// -// 4. Page9(0x900) -// -#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC // RF BW Setting?? - -#define rFPGA1_TxBlock 0x904 // Useless now -#define rFPGA1_DebugSelect 0x908 // Useless now -#define rFPGA1_TxInfo 0x90c // Useless now // Status report?? - -// -// 5. PageA(0xA00) -// -// Set Control channel to upper or lower. These settings are required only for 40MHz -#define rCCK0_System 0xa00 - -#define rCCK0_AFESetting 0xa04 // Disable init gain now // Select RX path by RSSI -#define rCCK0_CCA 0xa08 // Disable init gain now // Init gain - -#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series -#define rCCK0_RxAGC2 0xa10 //AGC & DAGC - -#define rCCK0_RxHP 0xa14 - -#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold -#define rCCK0_DSPParameter2 0xa1c //SQ threshold - -#define rCCK0_TxFilter1 0xa20 -#define rCCK0_TxFilter2 0xa24 -#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3 -#define rCCK0_FalseAlarmReport 0xa2c //0xa2d useless now 0xa30-a4f channel report -#define rCCK0_TRSSIReport 0xa50 -#define rCCK0_RxReport 0xa54 //0xa57 -#define rCCK0_FACounterLower 0xa5c //0xa5b -#define rCCK0_FACounterUpper 0xa58 //0xa5c - -// -// 6. PageC(0xC00) -// -#define rOFDM0_LSTF 0xc00 - -#define rOFDM0_TRxPathEnable 0xc04 -#define rOFDM0_TRMuxPar 0xc08 -#define rOFDM0_TRSWIsolation 0xc0c - -#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter -#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix -#define rOFDM0_XBRxAFE 0xc18 -#define rOFDM0_XBRxIQImbalance 0xc1c -#define rOFDM0_XCRxAFE 0xc20 -#define rOFDM0_XCRxIQImbalance 0xc24 -#define rOFDM0_XDRxAFE 0xc28 -#define rOFDM0_XDRxIQImbalance 0xc2c - -#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD // DM tune init gain -#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync. -#define rOFDM0_RxDetector3 0xc38 //Frame Sync. -#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI - -#define rOFDM0_RxDSP 0xc40 //Rx Sync Path -#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC -#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold -#define rOFDM0_ECCAThreshold 0xc4c // energy CCA - -#define rOFDM0_XAAGCCore1 0xc50 // DIG -#define rOFDM0_XAAGCCore2 0xc54 -#define rOFDM0_XBAGCCore1 0xc58 -#define rOFDM0_XBAGCCore2 0xc5c -#define rOFDM0_XCAGCCore1 0xc60 -#define rOFDM0_XCAGCCore2 0xc64 -#define rOFDM0_XDAGCCore1 0xc68 -#define rOFDM0_XDAGCCore2 0xc6c - -#define rOFDM0_AGCParameter1 0xc70 -#define rOFDM0_AGCParameter2 0xc74 -#define rOFDM0_AGCRSSITable 0xc78 -#define rOFDM0_HTSTFAGC 0xc7c - -#define rOFDM0_XATxIQImbalance 0xc80 // TX PWR TRACK and DIG -#define rOFDM0_XATxAFE 0xc84 -#define rOFDM0_XBTxIQImbalance 0xc88 -#define rOFDM0_XBTxAFE 0xc8c -#define rOFDM0_XCTxIQImbalance 0xc90 -#define rOFDM0_XCTxAFE 0xc94 -#define rOFDM0_XDTxIQImbalance 0xc98 -#define rOFDM0_XDTxAFE 0xc9c - -#define rOFDM0_RxHPParameter 0xce0 -#define rOFDM0_TxPseudoNoiseWgt 0xce4 -#define rOFDM0_FrameSync 0xcf0 -#define rOFDM0_DFSReport 0xcf4 -#define rOFDM0_TxCoeff1 0xca4 -#define rOFDM0_TxCoeff2 0xca8 -#define rOFDM0_TxCoeff3 0xcac -#define rOFDM0_TxCoeff4 0xcb0 -#define rOFDM0_TxCoeff5 0xcb4 -#define rOFDM0_TxCoeff6 0xcb8 - - -// -// 7. PageD(0xD00) -// -#define rOFDM1_LSTF 0xd00 -#define rOFDM1_TRxPathEnable 0xd04 -#define rOFDM1_CFO 0xd08 // No setting now -#define rOFDM1_CSI1 0xd10 -#define rOFDM1_SBD 0xd14 -#define rOFDM1_CSI2 0xd18 -#define rOFDM1_CFOTracking 0xd2c -#define rOFDM1_TRxMesaure1 0xd34 -#define rOFDM1_IntfDet 0xd3c -#define rOFDM1_PseudoNoiseStateAB 0xd50 -#define rOFDM1_PseudoNoiseStateCD 0xd54 -#define rOFDM1_RxPseudoNoiseWgt 0xd58 - -#define rOFDM_PHYCounter1 0xda0 //cca, parity fail -#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail -#define rOFDM_PHYCounter3 0xda8 //MCS not support -#define rOFDM_ShortCFOAB 0xdac // No setting now -#define rOFDM_ShortCFOCD 0xdb0 -#define rOFDM_LongCFOAB 0xdb4 -#define rOFDM_LongCFOCD 0xdb8 -#define rOFDM_TailCFOAB 0xdbc -#define rOFDM_TailCFOCD 0xdc0 -#define rOFDM_PWMeasure1 0xdc4 -#define rOFDM_PWMeasure2 0xdc8 -#define rOFDM_BWReport 0xdcc -#define rOFDM_AGCReport 0xdd0 -#define rOFDM_RxSNR 0xdd4 -#define rOFDM_RxEVMCSI 0xdd8 -#define rOFDM_SIGReport 0xddc - - -// -// 8. PageE(0xE00) -// -#define rTxAGC_Rate18_06 0xe00 -#define rTxAGC_Rate54_24 0xe04 -#define rTxAGC_CCK_Mcs32 0xe08 -#define rTxAGC_Mcs03_Mcs00 0xe10 -#define rTxAGC_Mcs07_Mcs04 0xe14 -#define rTxAGC_Mcs11_Mcs08 0xe18 -#define rTxAGC_Mcs15_Mcs12 0xe1c - -// -// 7. RF Register 0x00-0x2E (RF 8256) -// RF-0222D 0x00-3F -// -//Zebra1 -#define rZebra1_HSSIEnable 0x0 // Useless now -#define rZebra1_TRxEnable1 0x1 -#define rZebra1_TRxEnable2 0x2 -#define rZebra1_AGC 0x4 -#define rZebra1_ChargePump 0x5 -//#if (RTL92SE_FPGA_VERIFY == 1) -#define rZebra1_Channel 0x7 // RF channel switch -//#else - -//#endif -#define rZebra1_TxGain 0x8 // Useless now -#define rZebra1_TxLPF 0x9 -#define rZebra1_RxLPF 0xb -#define rZebra1_RxHPFCorner 0xc - -//Zebra4 -#define rGlobalCtrl 0 // Useless now -#define rRTL8256_TxLPF 19 -#define rRTL8256_RxLPF 11 - -//RTL8258 -#define rRTL8258_TxLPF 0x11 // Useless now -#define rRTL8258_RxLPF 0x13 -#define rRTL8258_RSSILPF 0xa - -// -// RL6052 Register definition -// -#define RF_AC 0x00 // - -#define RF_IQADJ_G1 0x01 // -#define RF_IQADJ_G2 0x02 // -#define RF_POW_TRSW 0x05 // - -#define RF_GAIN_RX 0x06 // -#define RF_GAIN_TX 0x07 // - -#define RF_TXM_IDAC 0x08 // -#define RF_BS_IQGEN 0x0F // - -#define RF_MODE1 0x10 // -#define RF_MODE2 0x11 // - -#define RF_RX_AGC_HP 0x12 // -#define RF_TX_AGC 0x13 // -#define RF_BIAS 0x14 // -#define RF_IPA 0x15 // -#define RF_POW_ABILITY 0x17 // -#define RF_MODE_AG 0x18 // -#define rRfChannel 0x18 // RF channel and BW switch -#define RF_CHNLBW 0x18 // RF channel and BW switch -#define RF_TOP 0x19 // - -#define RF_RX_G1 0x1A // -#define RF_RX_G2 0x1B // - -#define RF_RX_BB2 0x1C // -#define RF_RX_BB1 0x1D // - -#define RF_RCK1 0x1E // -#define RF_RCK2 0x1F // - -#define RF_TX_G1 0x20 // -#define RF_TX_G2 0x21 // -#define RF_TX_G3 0x22 // - -#define RF_TX_BB1 0x23 // - -#define RF_T_METER 0x24 // - -#define RF_SYN_G1 0x25 // RF TX Power control -#define RF_SYN_G2 0x26 // RF TX Power control -#define RF_SYN_G3 0x27 // RF TX Power control -#define RF_SYN_G4 0x28 // RF TX Power control -#define RF_SYN_G5 0x29 // RF TX Power control -#define RF_SYN_G6 0x2A // RF TX Power control -#define RF_SYN_G7 0x2B // RF TX Power control -#define RF_SYN_G8 0x2C // RF TX Power control - -#define RF_RCK_OS 0x30 // RF TX PA control - -#define RF_TXPA_G1 0x31 // RF TX PA control -#define RF_TXPA_G2 0x32 // RF TX PA control -#define RF_TXPA_G3 0x33 // RF TX PA control - -// -//Bit Mask -// -// 1. Page1(0x100) -#define bBBResetB 0x100 // Useless now? -#define bGlobalResetB 0x200 -#define bOFDMTxStart 0x4 -#define bCCKTxStart 0x8 -#define bCRC32Debug 0x100 -#define bPMACLoopback 0x10 -#define bTxLSIG 0xffffff -#define bOFDMTxRate 0xf -#define bOFDMTxReserved 0x10 -#define bOFDMTxLength 0x1ffe0 -#define bOFDMTxParity 0x20000 -#define bTxHTSIG1 0xffffff -#define bTxHTMCSRate 0x7f -#define bTxHTBW 0x80 -#define bTxHTLength 0xffff00 -#define bTxHTSIG2 0xffffff -#define bTxHTSmoothing 0x1 -#define bTxHTSounding 0x2 -#define bTxHTReserved 0x4 -#define bTxHTAggreation 0x8 -#define bTxHTSTBC 0x30 -#define bTxHTAdvanceCoding 0x40 -#define bTxHTShortGI 0x80 -#define bTxHTNumberHT_LTF 0x300 -#define bTxHTCRC8 0x3fc00 -#define bCounterReset 0x10000 -#define bNumOfOFDMTx 0xffff -#define bNumOfCCKTx 0xffff0000 -#define bTxIdleInterval 0xffff -#define bOFDMService 0xffff0000 -#define bTxMACHeader 0xffffffff -#define bTxDataInit 0xff -#define bTxHTMode 0x100 -#define bTxDataType 0x30000 -#define bTxRandomSeed 0xffffffff -#define bCCKTxPreamble 0x1 -#define bCCKTxSFD 0xffff0000 -#define bCCKTxSIG 0xff -#define bCCKTxService 0xff00 -#define bCCKLengthExt 0x8000 -#define bCCKTxLength 0xffff0000 -#define bCCKTxCRC16 0xffff -#define bCCKTxStatus 0x1 -#define bOFDMTxStatus 0x2 - -#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff)) - -// 2. Page8(0x800) -#define bRFMOD 0x1 // Reg 0x800 rFPGA0_RFMOD -#define bJapanMode 0x2 -#define bCCKTxSC 0x30 -#define bCCKEn 0x1000000 -#define bOFDMEn 0x2000000 - -#define bOFDMRxADCPhase 0x10000 // Useless now -#define bOFDMTxDACPhase 0x40000 -#define bXATxAGC 0x3f - -#define bXBTxAGC 0xf00 // Reg 80c rFPGA0_TxGainStage -#define bXCTxAGC 0xf000 -#define bXDTxAGC 0xf0000 - -#define bPAStart 0xf0000000 // Useless now -#define bTRStart 0x00f00000 -#define bRFStart 0x0000f000 -#define bBBStart 0x000000f0 -#define bBBCCKStart 0x0000000f -#define bPAEnd 0xf //Reg0x814 -#define bTREnd 0x0f000000 -#define bRFEnd 0x000f0000 -#define bCCAMask 0x000000f0 //T2R -#define bR2RCCAMask 0x00000f00 -#define bHSSI_R2TDelay 0xf8000000 -#define bHSSI_T2RDelay 0xf80000 -#define bContTxHSSI 0x400 //channel gain at continue Tx -#define bIGFromCCK 0x200 -#define bAGCAddress 0x3f -#define bRxHPTx 0x7000 -#define bRxHPT2R 0x38000 -#define bRxHPCCKIni 0xc0000 -#define bAGCTxCode 0xc00000 -#define bAGCRxCode 0x300000 - -#define b3WireDataLength 0x800 // Reg 0x820~84f rFPGA0_XA_HSSIParameter1 -#define b3WireAddressLength 0x400 - -#define b3WireRFPowerDown 0x1 // Useless now -//#define bHWSISelect 0x8 -#define b5GPAPEPolarity 0x40000000 -#define b2GPAPEPolarity 0x80000000 -#define bRFSW_TxDefaultAnt 0x3 -#define bRFSW_TxOptionAnt 0x30 -#define bRFSW_RxDefaultAnt 0x300 -#define bRFSW_RxOptionAnt 0x3000 -#define bRFSI_3WireData 0x1 -#define bRFSI_3WireClock 0x2 -#define bRFSI_3WireLoad 0x4 -#define bRFSI_3WireRW 0x8 -#define bRFSI_3Wire 0xf - -#define bRFSI_RFENV 0x10 // Reg 0x870 rFPGA0_XAB_RFInterfaceSW - -#define bRFSI_TRSW 0x20 // Useless now -#define bRFSI_TRSWB 0x40 -#define bRFSI_ANTSW 0x100 -#define bRFSI_ANTSWB 0x200 -#define bRFSI_PAPE 0x400 -#define bRFSI_PAPE5G 0x800 -#define bBandSelect 0x1 -#define bHTSIG2_GI 0x80 -#define bHTSIG2_Smoothing 0x01 -#define bHTSIG2_Sounding 0x02 -#define bHTSIG2_Aggreaton 0x08 -#define bHTSIG2_STBC 0x30 -#define bHTSIG2_AdvCoding 0x40 -#define bHTSIG2_NumOfHTLTF 0x300 -#define bHTSIG2_CRC8 0x3fc -#define bHTSIG1_MCS 0x7f -#define bHTSIG1_BandWidth 0x80 -#define bHTSIG1_HTLength 0xffff -#define bLSIG_Rate 0xf -#define bLSIG_Reserved 0x10 -#define bLSIG_Length 0x1fffe -#define bLSIG_Parity 0x20 -#define bCCKRxPhase 0x4 -#define bLSSIReadAddress 0x7f800000 // T65 RF -#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal -#define bLSSIReadBackData 0xfffff // T65 RF -#define bLSSIReadOKFlag 0x1000 // Useless now -#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz -#define bRegulator0Standby 0x1 -#define bRegulatorPLLStandby 0x2 -#define bRegulator1Standby 0x4 -#define bPLLPowerUp 0x8 -#define bDPLLPowerUp 0x10 -#define bDA10PowerUp 0x20 -#define bAD7PowerUp 0x200 -#define bDA6PowerUp 0x2000 -#define bXtalPowerUp 0x4000 -#define b40MDClkPowerUP 0x8000 -#define bDA6DebugMode 0x20000 -#define bDA6Swing 0x380000 - -#define bADClkPhase 0x4000000 // Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ - -#define b80MClkDelay 0x18000000 // Useless -#define bAFEWatchDogEnable 0x20000000 - -#define bXtalCap01 0xc0000000 // Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap -#define bXtalCap23 0x3 -#define bXtalCap92x 0x0f000000 -#define bXtalCap 0x0f000000 - -#define bIntDifClkEnable 0x400 // Useless -#define bExtSigClkEnable 0x800 -#define bBandgapMbiasPowerUp 0x10000 -#define bAD11SHGain 0xc0000 -#define bAD11InputRange 0x700000 -#define bAD11OPCurrent 0x3800000 -#define bIPathLoopback 0x4000000 -#define bQPathLoopback 0x8000000 -#define bAFELoopback 0x10000000 -#define bDA10Swing 0x7e0 -#define bDA10Reverse 0x800 -#define bDAClkSource 0x1000 -#define bAD7InputRange 0x6000 -#define bAD7Gain 0x38000 -#define bAD7OutputCMMode 0x40000 -#define bAD7InputCMMode 0x380000 -#define bAD7Current 0xc00000 -#define bRegulatorAdjust 0x7000000 -#define bAD11PowerUpAtTx 0x1 -#define bDA10PSAtTx 0x10 -#define bAD11PowerUpAtRx 0x100 -#define bDA10PSAtRx 0x1000 -#define bCCKRxAGCFormat 0x200 -#define bPSDFFTSamplepPoint 0xc000 -#define bPSDAverageNum 0x3000 -#define bIQPathControl 0xc00 -#define bPSDFreq 0x3ff -#define bPSDAntennaPath 0x30 -#define bPSDIQSwitch 0x40 -#define bPSDRxTrigger 0x400000 -#define bPSDTxTrigger 0x80000000 -#define bPSDSineToneScale 0x7f000000 -#define bPSDReport 0xffff - -// 3. Page9(0x900) -#define bOFDMTxSC 0x30000000 // Useless -#define bCCKTxOn 0x1 -#define bOFDMTxOn 0x2 -#define bDebugPage 0xfff //reset debug page and also HWord, LWord -#define bDebugItem 0xff //reset debug page and LWord -#define bAntL 0x10 -#define bAntNonHT 0x100 -#define bAntHT1 0x1000 -#define bAntHT2 0x10000 -#define bAntHT1S1 0x100000 -#define bAntNonHTS1 0x1000000 - -// 4. PageA(0xA00) -#define bCCKBBMode 0x3 // Useless -#define bCCKTxPowerSaving 0x80 -#define bCCKRxPowerSaving 0x40 - -#define bCCKSideBand 0x10 // Reg 0xa00 rCCK0_System 20/40 switch - -#define bCCKScramble 0x8 // Useless -#define bCCKAntDiversity 0x8000 -#define bCCKCarrierRecovery 0x4000 -#define bCCKTxRate 0x3000 -#define bCCKDCCancel 0x0800 -#define bCCKISICancel 0x0400 -#define bCCKMatchFilter 0x0200 -#define bCCKEqualizer 0x0100 -#define bCCKPreambleDetect 0x800000 -#define bCCKFastFalseCCA 0x400000 -#define bCCKChEstStart 0x300000 -#define bCCKCCACount 0x080000 -#define bCCKcs_lim 0x070000 -#define bCCKBistMode 0x80000000 -#define bCCKCCAMask 0x40000000 -#define bCCKTxDACPhase 0x4 -#define bCCKRxADCPhase 0x20000000 //r_rx_clk -#define bCCKr_cp_mode0 0x0100 -#define bCCKTxDCOffset 0xf0 -#define bCCKRxDCOffset 0xf -#define bCCKCCAMode 0xc000 -#define bCCKFalseCS_lim 0x3f00 -#define bCCKCS_ratio 0xc00000 -#define bCCKCorgBit_sel 0x300000 -#define bCCKPD_lim 0x0f0000 -#define bCCKNewCCA 0x80000000 -#define bCCKRxHPofIG 0x8000 -#define bCCKRxIG 0x7f00 -#define bCCKLNAPolarity 0x800000 -#define bCCKRx1stGain 0x7f0000 -#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity -#define bCCKRxAGCSatLevel 0x1f000000 -#define bCCKRxAGCSatCount 0xe0 -#define bCCKRxRFSettle 0x1f //AGCsamp_dly -#define bCCKFixedRxAGC 0x8000 -//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824 -#define bCCKAntennaPolarity 0x2000 -#define bCCKTxFilterType 0x0c00 -#define bCCKRxAGCReportType 0x0300 -#define bCCKRxDAGCEn 0x80000000 -#define bCCKRxDAGCPeriod 0x20000000 -#define bCCKRxDAGCSatLevel 0x1f000000 -#define bCCKTimingRecovery 0x800000 -#define bCCKTxC0 0x3f0000 -#define bCCKTxC1 0x3f000000 -#define bCCKTxC2 0x3f -#define bCCKTxC3 0x3f00 -#define bCCKTxC4 0x3f0000 -#define bCCKTxC5 0x3f000000 -#define bCCKTxC6 0x3f -#define bCCKTxC7 0x3f00 -#define bCCKDebugPort 0xff0000 -#define bCCKDACDebug 0x0f000000 -#define bCCKFalseAlarmEnable 0x8000 -#define bCCKFalseAlarmRead 0x4000 -#define bCCKTRSSI 0x7f -#define bCCKRxAGCReport 0xfe -#define bCCKRxReport_AntSel 0x80000000 -#define bCCKRxReport_MFOff 0x40000000 -#define bCCKRxRxReport_SQLoss 0x20000000 -#define bCCKRxReport_Pktloss 0x10000000 -#define bCCKRxReport_Lockedbit 0x08000000 -#define bCCKRxReport_RateError 0x04000000 -#define bCCKRxReport_RxRate 0x03000000 -#define bCCKRxFACounterLower 0xff -#define bCCKRxFACounterUpper 0xff000000 -#define bCCKRxHPAGCStart 0xe000 -#define bCCKRxHPAGCFinal 0x1c00 -#define bCCKRxFalseAlarmEnable 0x8000 -#define bCCKFACounterFreeze 0x4000 -#define bCCKTxPathSel 0x10000000 -#define bCCKDefaultRxPath 0xc000000 -#define bCCKOptionRxPath 0x3000000 - -// 5. PageC(0xC00) -#define bNumOfSTF 0x3 // Useless -#define bShift_L 0xc0 -#define bGI_TH 0xc -#define bRxPathA 0x1 -#define bRxPathB 0x2 -#define bRxPathC 0x4 -#define bRxPathD 0x8 -#define bTxPathA 0x1 -#define bTxPathB 0x2 -#define bTxPathC 0x4 -#define bTxPathD 0x8 -#define bTRSSIFreq 0x200 -#define bADCBackoff 0x3000 -#define bDFIRBackoff 0xc000 -#define bTRSSILatchPhase 0x10000 -#define bRxIDCOffset 0xff -#define bRxQDCOffset 0xff00 -#define bRxDFIRMode 0x1800000 -#define bRxDCNFType 0xe000000 -#define bRXIQImb_A 0x3ff -#define bRXIQImb_B 0xfc00 -#define bRXIQImb_C 0x3f0000 -#define bRXIQImb_D 0xffc00000 -#define bDC_dc_Notch 0x60000 -#define bRxNBINotch 0x1f000000 -#define bPD_TH 0xf -#define bPD_TH_Opt2 0xc000 -#define bPWED_TH 0x700 -#define bIfMF_Win_L 0x800 -#define bPD_Option 0x1000 -#define bMF_Win_L 0xe000 -#define bBW_Search_L 0x30000 -#define bwin_enh_L 0xc0000 -#define bBW_TH 0x700000 -#define bED_TH2 0x3800000 -#define bBW_option 0x4000000 -#define bRatio_TH 0x18000000 -#define bWindow_L 0xe0000000 -#define bSBD_Option 0x1 -#define bFrame_TH 0x1c -#define bFS_Option 0x60 -#define bDC_Slope_check 0x80 -#define bFGuard_Counter_DC_L 0xe00 -#define bFrame_Weight_Short 0x7000 -#define bSub_Tune 0xe00000 -#define bFrame_DC_Length 0xe000000 -#define bSBD_start_offset 0x30000000 -#define bFrame_TH_2 0x7 -#define bFrame_GI2_TH 0x38 -#define bGI2_Sync_en 0x40 -#define bSarch_Short_Early 0x300 -#define bSarch_Short_Late 0xc00 -#define bSarch_GI2_Late 0x70000 -#define bCFOAntSum 0x1 -#define bCFOAcc 0x2 -#define bCFOStartOffset 0xc -#define bCFOLookBack 0x70 -#define bCFOSumWeight 0x80 -#define bDAGCEnable 0x10000 -#define bTXIQImb_A 0x3ff -#define bTXIQImb_B 0xfc00 -#define bTXIQImb_C 0x3f0000 -#define bTXIQImb_D 0xffc00000 -#define bTxIDCOffset 0xff -#define bTxQDCOffset 0xff00 -#define bTxDFIRMode 0x10000 -#define bTxPesudoNoiseOn 0x4000000 -#define bTxPesudoNoise_A 0xff -#define bTxPesudoNoise_B 0xff00 -#define bTxPesudoNoise_C 0xff0000 -#define bTxPesudoNoise_D 0xff000000 -#define bCCADropOption 0x20000 -#define bCCADropThres 0xfff00000 -#define bEDCCA_H 0xf -#define bEDCCA_L 0xf0 -#define bLambda_ED 0x300 -#define bRxInitialGain 0x7f -#define bRxAntDivEn 0x80 -#define bRxAGCAddressForLNA 0x7f00 -#define bRxHighPowerFlow 0x8000 -#define bRxAGCFreezeThres 0xc0000 -#define bRxFreezeStep_AGC1 0x300000 -#define bRxFreezeStep_AGC2 0xc00000 -#define bRxFreezeStep_AGC3 0x3000000 -#define bRxFreezeStep_AGC0 0xc000000 -#define bRxRssi_Cmp_En 0x10000000 -#define bRxQuickAGCEn 0x20000000 -#define bRxAGCFreezeThresMode 0x40000000 -#define bRxOverFlowCheckType 0x80000000 -#define bRxAGCShift 0x7f -#define bTRSW_Tri_Only 0x80 -#define bPowerThres 0x300 -#define bRxAGCEn 0x1 -#define bRxAGCTogetherEn 0x2 -#define bRxAGCMin 0x4 -#define bRxHP_Ini 0x7 -#define bRxHP_TRLNA 0x70 -#define bRxHP_RSSI 0x700 -#define bRxHP_BBP1 0x7000 -#define bRxHP_BBP2 0x70000 -#define bRxHP_BBP3 0x700000 -#define bRSSI_H 0x7f0000 //the threshold for high power -#define bRSSI_Gen 0x7f000000 //the threshold for ant diversity -#define bRxSettle_TRSW 0x7 -#define bRxSettle_LNA 0x38 -#define bRxSettle_RSSI 0x1c0 -#define bRxSettle_BBP 0xe00 -#define bRxSettle_RxHP 0x7000 -#define bRxSettle_AntSW_RSSI 0x38000 -#define bRxSettle_AntSW 0xc0000 -#define bRxProcessTime_DAGC 0x300000 -#define bRxSettle_HSSI 0x400000 -#define bRxProcessTime_BBPPW 0x800000 -#define bRxAntennaPowerShift 0x3000000 -#define bRSSITableSelect 0xc000000 -#define bRxHP_Final 0x7000000 -#define bRxHTSettle_BBP 0x7 -#define bRxHTSettle_HSSI 0x8 -#define bRxHTSettle_RxHP 0x70 -#define bRxHTSettle_BBPPW 0x80 -#define bRxHTSettle_Idle 0x300 -#define bRxHTSettle_Reserved 0x1c00 -#define bRxHTRxHPEn 0x8000 -#define bRxHTAGCFreezeThres 0x30000 -#define bRxHTAGCTogetherEn 0x40000 -#define bRxHTAGCMin 0x80000 -#define bRxHTAGCEn 0x100000 -#define bRxHTDAGCEn 0x200000 -#define bRxHTRxHP_BBP 0x1c00000 -#define bRxHTRxHP_Final 0xe0000000 -#define bRxPWRatioTH 0x3 -#define bRxPWRatioEn 0x4 -#define bRxMFHold 0x3800 -#define bRxPD_Delay_TH1 0x38 -#define bRxPD_Delay_TH2 0x1c0 -#define bRxPD_DC_COUNT_MAX 0x600 -//#define bRxMF_Hold 0x3800 -#define bRxPD_Delay_TH 0x8000 -#define bRxProcess_Delay 0xf0000 -#define bRxSearchrange_GI2_Early 0x700000 -#define bRxFrame_Guard_Counter_L 0x3800000 -#define bRxSGI_Guard_L 0xc000000 -#define bRxSGI_Search_L 0x30000000 -#define bRxSGI_TH 0xc0000000 -#define bDFSCnt0 0xff -#define bDFSCnt1 0xff00 -#define bDFSFlag 0xf0000 -#define bMFWeightSum 0x300000 -#define bMinIdxTH 0x7f000000 -#define bDAFormat 0x40000 -#define bTxChEmuEnable 0x01000000 -#define bTRSWIsolation_A 0x7f -#define bTRSWIsolation_B 0x7f00 -#define bTRSWIsolation_C 0x7f0000 -#define bTRSWIsolation_D 0x7f000000 -#define bExtLNAGain 0x7c00 - -// 6. PageE(0xE00) -#define bSTBCEn 0x4 // Useless -#define bAntennaMapping 0x10 -#define bNss 0x20 -#define bCFOAntSumD 0x200 -#define bPHYCounterReset 0x8000000 -#define bCFOReportGet 0x4000000 -#define bOFDMContinueTx 0x10000000 -#define bOFDMSingleCarrier 0x20000000 -#define bOFDMSingleTone 0x40000000 -//#define bRxPath1 0x01 -//#define bRxPath2 0x02 -//#define bRxPath3 0x04 -//#define bRxPath4 0x08 -//#define bTxPath1 0x10 -//#define bTxPath2 0x20 -#define bHTDetect 0x100 -#define bCFOEn 0x10000 -#define bCFOValue 0xfff00000 -#define bSigTone_Re 0x3f -#define bSigTone_Im 0x7f00 -#define bCounter_CCA 0xffff -#define bCounter_ParityFail 0xffff0000 -#define bCounter_RateIllegal 0xffff -#define bCounter_CRC8Fail 0xffff0000 -#define bCounter_MCSNoSupport 0xffff -#define bCounter_FastSync 0xffff -#define bShortCFO 0xfff -#define bShortCFOTLength 12 //total -#define bShortCFOFLength 11 //fraction -#define bLongCFO 0x7ff -#define bLongCFOTLength 11 -#define bLongCFOFLength 11 -#define bTailCFO 0x1fff -#define bTailCFOTLength 13 -#define bTailCFOFLength 12 -#define bmax_en_pwdB 0xffff -#define bCC_power_dB 0xffff0000 -#define bnoise_pwdB 0xffff -#define bPowerMeasTLength 10 -#define bPowerMeasFLength 3 -#define bRx_HT_BW 0x1 -#define bRxSC 0x6 -#define bRx_HT 0x8 -#define bNB_intf_det_on 0x1 -#define bIntf_win_len_cfg 0x30 -#define bNB_Intf_TH_cfg 0x1c0 -#define bRFGain 0x3f -#define bTableSel 0x40 -#define bTRSW 0x80 -#define bRxSNR_A 0xff -#define bRxSNR_B 0xff00 -#define bRxSNR_C 0xff0000 -#define bRxSNR_D 0xff000000 -#define bSNREVMTLength 8 -#define bSNREVMFLength 1 -#define bCSI1st 0xff -#define bCSI2nd 0xff00 -#define bRxEVM1st 0xff0000 -#define bRxEVM2nd 0xff000000 -#define bSIGEVM 0xff -#define bPWDB 0xff00 -#define bSGIEN 0x10000 - -#define bSFactorQAM1 0xf // Useless -#define bSFactorQAM2 0xf0 -#define bSFactorQAM3 0xf00 -#define bSFactorQAM4 0xf000 -#define bSFactorQAM5 0xf0000 -#define bSFactorQAM6 0xf0000 -#define bSFactorQAM7 0xf00000 -#define bSFactorQAM8 0xf000000 -#define bSFactorQAM9 0xf0000000 -#define bCSIScheme 0x100000 - -#define bNoiseLvlTopSet 0x3 // Useless -#define bChSmooth 0x4 -#define bChSmoothCfg1 0x38 -#define bChSmoothCfg2 0x1c0 -#define bChSmoothCfg3 0xe00 -#define bChSmoothCfg4 0x7000 -#define bMRCMode 0x800000 -#define bTHEVMCfg 0x7000000 - -#define bLoopFitType 0x1 // Useless -#define bUpdCFO 0x40 -#define bUpdCFOOffData 0x80 -#define bAdvUpdCFO 0x100 -#define bAdvTimeCtrl 0x800 -#define bUpdClko 0x1000 -#define bFC 0x6000 -#define bTrackingMode 0x8000 -#define bPhCmpEnable 0x10000 -#define bUpdClkoLTF 0x20000 -#define bComChCFO 0x40000 -#define bCSIEstiMode 0x80000 -#define bAdvUpdEqz 0x100000 -#define bUChCfg 0x7000000 -#define bUpdEqz 0x8000000 - -#define bTxAGCRate18_06 0x7f7f7f7f // Useless -#define bTxAGCRate54_24 0x7f7f7f7f -#define bTxAGCRateMCS32 0x7f -#define bTxAGCRateCCK 0x7f00 -#define bTxAGCRateMCS3_MCS0 0x7f7f7f7f -#define bTxAGCRateMCS7_MCS4 0x7f7f7f7f -#define bTxAGCRateMCS11_MCS8 0x7f7f7f7f -#define bTxAGCRateMCS15_MCS12 0x7f7f7f7f - -//Rx Pseduo noise -#define bRxPesudoNoiseOn 0x20000000 // Useless -#define bRxPesudoNoise_A 0xff -#define bRxPesudoNoise_B 0xff00 -#define bRxPesudoNoise_C 0xff0000 -#define bRxPesudoNoise_D 0xff000000 -#define bPesudoNoiseState_A 0xffff -#define bPesudoNoiseState_B 0xffff0000 -#define bPesudoNoiseState_C 0xffff -#define bPesudoNoiseState_D 0xffff0000 - -//7. RF Register -//Zebra1 -#define bZebra1_HSSIEnable 0x8 // Useless -#define bZebra1_TRxControl 0xc00 -#define bZebra1_TRxGainSetting 0x07f -#define bZebra1_RxCorner 0xc00 -#define bZebra1_TxChargePump 0x38 -#define bZebra1_RxChargePump 0x7 -#define bZebra1_ChannelNum 0xf80 -#define bZebra1_TxLPFBW 0x400 -#define bZebra1_RxLPFBW 0x600 - -//Zebra4 -#define bRTL8256RegModeCtrl1 0x100 // Useless -#define bRTL8256RegModeCtrl0 0x40 -#define bRTL8256_TxLPFBW 0x18 -#define bRTL8256_RxLPFBW 0x600 - -//RTL8258 -#define bRTL8258_TxLPFBW 0xc // Useless -#define bRTL8258_RxLPFBW 0xc00 -#define bRTL8258_RSSILPFBW 0xc0 - - -// -// Other Definition -// - -//byte endable for sb_write -#define bByte0 0x1 // Useless -#define bByte1 0x2 -#define bByte2 0x4 -#define bByte3 0x8 -#define bWord0 0x3 -#define bWord1 0xc -#define bDWord 0xf - -//for PutRegsetting & GetRegSetting BitMask -#define bMaskByte0 0xff // Reg 0xc50 rOFDM0_XAAGCCore~0xC6f -#define bMaskByte1 0xff00 -#define bMaskByte2 0xff0000 -#define bMaskByte3 0xff000000 -#define bMaskHWord 0xffff0000 -#define bMaskLWord 0x0000ffff -#define bMaskDWord 0xffffffff - -//for PutRFRegsetting & GetRFRegSetting BitMask -#define bMask12Bits 0xfffff // RF Reg mask bits -#define bMask20Bits 0xfffff // RF Reg mask bits T65 RF -#define bRFRegOffsetMask 0xfffff - -#define bEnable 0x1 // Useless -#define bDisable 0x0 - -#define LeftAntenna 0x0 // Useless -#define RightAntenna 0x1 - -#define tCheckTxStatus 500 //500ms // Useless -#define tUpdateRxCounter 100 //100ms - -#define rateCCK 0 // Useless -#define rateOFDM 1 -#define rateHT 2 - -//define Register-End -#define bPMAC_End 0x1ff // Useless -#define bFPGAPHY0_End 0x8ff -#define bFPGAPHY1_End 0x9ff -#define bCCKPHY0_End 0xaff -#define bOFDMPHY0_End 0xcff -#define bOFDMPHY1_End 0xdff - -//define max debug item in each debug page -//#define bMaxItem_FPGA_PHY0 0x9 -//#define bMaxItem_FPGA_PHY1 0x3 -//#define bMaxItem_PHY_11B 0x16 -//#define bMaxItem_OFDM_PHY0 0x29 -//#define bMaxItem_OFDM_PHY1 0x0 - -#define bPMACControl 0x0 // Useless -#define bWMACControl 0x1 -#define bWNICControl 0x2 - -#define PathA 0x0 // Useless -#define PathB 0x1 -#define PathC 0x2 -#define PathD 0x3 - -/*--------------------------Define Parameters-------------------------------*/ - - -#endif //__INC_HAL8192SPHYREG_H - |
