diff options
Diffstat (limited to 'drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h')
| -rw-r--r-- | drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h | 530 |
1 files changed, 0 insertions, 530 deletions
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h deleted file mode 100644 index 1712189..0000000 --- a/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h +++ /dev/null @@ -1,530 +0,0 @@ -/****************************************************************************** - * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * wlanfae <wlanfae@realtek.com> -******************************************************************************/ -#ifndef _RTL819XU_HTTYPE_H_ -#define _RTL819XU_HTTYPE_H_ - -//------------------------------------------------------------ -// The HT Capability element is present in beacons, association request, -// reassociation request and probe response frames -//------------------------------------------------------------ - -// -// Operation mode value -// -#define HT_OPMODE_NO_PROTECT 0 -#define HT_OPMODE_OPTIONAL 1 -#define HT_OPMODE_40MHZ_PROTECT 2 -#define HT_OPMODE_MIXED 3 - -// -// MIMO Power Save Setings -// -#define MIMO_PS_STATIC 0 -#define MIMO_PS_DYNAMIC 1 -#define MIMO_PS_NOLIMIT 3 - - -// -// There should be 128 bits to cover all of the MCS rates. However, since -// 8190 does not support too much rates, one integer is quite enough. -// - -#define sHTCLng 4 - - -#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff -#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00 -#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP - - -typedef enum _HT_MCS_RATE{ - HT_MCS0 = 0x00000001, - HT_MCS1 = 0x00000002, - HT_MCS2 = 0x00000004, - HT_MCS3 = 0x00000008, - HT_MCS4 = 0x00000010, - HT_MCS5 = 0x00000020, - HT_MCS6 = 0x00000040, - HT_MCS7 = 0x00000080, - HT_MCS8 = 0x00000100, - HT_MCS9 = 0x00000200, - HT_MCS10 = 0x00000400, - HT_MCS11 = 0x00000800, - HT_MCS12 = 0x00001000, - HT_MCS13 = 0x00002000, - HT_MCS14 = 0x00004000, - HT_MCS15 = 0x00008000, - // Do not define MCS32 here although 8190 support MCS32 -}HT_MCS_RATE,*PHT_MCS_RATE; - -// -// Represent Channel Width in HT Capabilities -// -typedef enum _HT_CHANNEL_WIDTH{ - HT_CHANNEL_WIDTH_20 = 0, - HT_CHANNEL_WIDTH_20_40 = 1, -}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; - -// -// Represent Extention Channel Offset in HT Capabilities -// This is available only in 40Mhz mode. -// -typedef enum _HT_EXTCHNL_OFFSET{ - HT_EXTCHNL_OFFSET_NO_EXT = 0, - HT_EXTCHNL_OFFSET_UPPER = 1, - HT_EXTCHNL_OFFSET_NO_DEF = 2, - HT_EXTCHNL_OFFSET_LOWER = 3, -}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; - -typedef enum _CHNLOP{ - CHNLOP_NONE = 0, // No Action now - CHNLOP_SCAN = 1, // Scan in progress - CHNLOP_SWBW = 2, // Bandwidth switching in progress - CHNLOP_SWCHNL = 3, // Software Channel switching in progress -} CHNLOP, *PCHNLOP; - -// Determine if the Channel Operation is in progress -#define CHHLOP_IN_PROGRESS(_pHTInfo) \ - ((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE - -/* -typedef union _HT_CAPABILITY{ - u16 ShortData; - u8 CharData[2]; - struct - { - u16 AdvCoding:1; - u16 ChlWidth:1; - u16 MimoPwrSave:2; - u16 GreenField:1; - u16 ShortGI20Mhz:1; - u16 ShortGI40Mhz:1; - u16 STBC:1; - u16 BeamForm:1; - u16 DelayBA:1; - u16 MaxAMSDUSize:1; - u16 DssCCk:1; - u16 PSMP:1; - u16 Rsvd:3; - }Field; -}HT_CAPABILITY, *PHT_CAPABILITY; - -typedef union _HT_CAPABILITY_MACPARA{ - u8 ShortData; - u8 CharData[1]; - struct - { - u8 MaxRxAMPDU:2; - u8 MPDUDensity:2; - u8 Rsvd:4; - }Field; -}HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA; -*/ - -typedef enum _HT_ACTION{ - ACT_RECOMMAND_WIDTH = 0, - ACT_MIMO_PWR_SAVE = 1, - ACT_PSMP = 2, - ACT_SET_PCO_PHASE = 3, - ACT_MIMO_CHL_MEASURE = 4, - ACT_RECIPROCITY_CORRECT = 5, - ACT_MIMO_CSI_MATRICS = 6, - ACT_MIMO_NOCOMPR_STEER = 7, - ACT_MIMO_COMPR_STEER = 8, - ACT_ANTENNA_SELECT = 9, -} HT_ACTION, *PHT_ACTION; - - -/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */ -typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier{ - SC_MODE_DUPLICATE = 0, - SC_MODE_LOWER = 1, - SC_MODE_UPPER = 2, - SC_MODE_FULL40MHZ = 3, -}HT_BW40_SC_E; - -typedef struct _HT_CAPABILITY_ELE{ - - //HT capability info - u8 AdvCoding:1; - u8 ChlWidth:1; - u8 MimoPwrSave:2; - u8 GreenField:1; - u8 ShortGI20Mhz:1; - u8 ShortGI40Mhz:1; - u8 TxSTBC:1; - u8 RxSTBC:2; - u8 DelayBA:1; - u8 MaxAMSDUSize:1; - u8 DssCCk:1; - u8 PSMP:1; - u8 Rsvd1:1; - u8 LSigTxopProtect:1; - - //MAC HT parameters info - u8 MaxRxAMPDUFactor:2; - u8 MPDUDensity:3; - u8 Rsvd2:3; - - //Supported MCS set - u8 MCS[16]; - - - //Extended HT Capability Info - u16 ExtHTCapInfo; - - //TXBF Capabilities - u8 TxBFCap[4]; - - //Antenna Selection Capabilities - u8 ASCap; - -} __attribute__ ((packed)) HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE; - -//------------------------------------------------------------ -// The HT Information element is present in beacons -// Only AP is required to include this element -//------------------------------------------------------------ - -typedef struct _HT_INFORMATION_ELE{ - u8 ControlChl; - - u8 ExtChlOffset:2; - u8 RecommemdedTxWidth:1; - u8 RIFS:1; - u8 PSMPAccessOnly:1; - u8 SrvIntGranularity:3; - - u8 OptMode:2; - u8 NonGFDevPresent:1; - u8 Revd1:5; - u8 Revd2:8; - - u8 Rsvd3:6; - u8 DualBeacon:1; - u8 DualCTSProtect:1; - - u8 SecondaryBeacon:1; - u8 LSigTxopProtectFull:1; - u8 PcoActive:1; - u8 PcoPhase:1; - u8 Rsvd4:4; - - u8 BasicMSC[16]; -} __attribute__ ((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE; - -// -// MIMO Power Save control field. -// This is appear in MIMO Power Save Action Frame -// -typedef struct _MIMOPS_CTRL{ - u8 MimoPsEnable:1; - u8 MimoPsMode:1; - u8 Reserved:6; -} MIMOPS_CTRL, *PMIMOPS_CTRL; - -typedef enum _HT_SPEC_VER{ - HT_SPEC_VER_IEEE = 0, - HT_SPEC_VER_EWC = 1, -}HT_SPEC_VER, *PHT_SPEC_VER; - -typedef enum _HT_AGGRE_MODE_E{ - HT_AGG_AUTO = 0, - HT_AGG_FORCE_ENABLE = 1, - HT_AGG_FORCE_DISABLE = 2, -}HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E; - -//------------------------------------------------------------ -// The Data structure is used to keep HT related variables when card is -// configured as non-AP STA mode. **Note** Current_xxx should be set -// to default value in HTInitializeHTInfo() -//------------------------------------------------------------ - -typedef struct _RT_HIGH_THROUGHPUT{ - u8 bEnableHT; - u8 bCurrentHTSupport; - - u8 bRegBW40MHz; // Tx 40MHz channel capablity - u8 bCurBW40MHz; // Tx 40MHz channel capability - - u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz - u8 bCurShortGI40MHz; // Tx Short GI for 40MHz - - u8 bRegShortGI20MHz; // Tx Short GI for 20MHz - u8 bCurShortGI20MHz; // Tx Short GI for 20MHz - - u8 bRegSuppCCK; // Tx CCK rate capability - u8 bCurSuppCCK; // Tx CCK rate capability - - // 802.11n spec version for "peer" - HT_SPEC_VER ePeerHTSpecVer; - - - // HT related information for "Self" - HT_CAPABILITY_ELE SelfHTCap; // This is HT cap element sent to peer STA, which also indicate HT Rx capabilities. - HT_INFORMATION_ELE SelfHTInfo; // This is HT info element sent to peer STA, which also indicate HT Rx capabilities. - - // HT related information for "Peer" - u8 PeerHTCapBuf[32]; - u8 PeerHTInfoBuf[32]; - - - // A-MSDU related - u8 bAMSDU_Support; // This indicates Tx A-MSDU capability - u16 nAMSDU_MaxSize; // This indicates Tx A-MSDU capability - u8 bCurrent_AMSDU_Support; // This indicates Tx A-MSDU capability - u16 nCurrent_AMSDU_MaxSize; // This indicates Tx A-MSDU capability - - - // AMPDU related <2006.08.10 Emily> - u8 bAMPDUEnable; // This indicate Tx A-MPDU capability - u8 bCurrentAMPDUEnable; // This indicate Tx A-MPDU capability - u8 AMPDU_Factor; // This indicate Tx A-MPDU capability - u8 CurrentAMPDUFactor; // This indicate Tx A-MPDU capability - u8 MPDU_Density; // This indicate Tx A-MPDU capability - u8 CurrentMPDUDensity; // This indicate Tx A-MPDU capability - - // Forced A-MPDU enable - HT_AGGRE_MODE_E ForcedAMPDUMode; - u8 ForcedAMPDUFactor; - u8 ForcedMPDUDensity; - - // Forced A-MSDU enable - HT_AGGRE_MODE_E ForcedAMSDUMode; - u16 ForcedAMSDUMaxSize; - - u8 bForcedShortGI; - - u8 CurrentOpMode; - - // MIMO PS related - u8 SelfMimoPs; - u8 PeerMimoPs; - - // 40MHz Channel Offset settings. - HT_EXTCHNL_OFFSET CurSTAExtChnlOffset; - u8 bCurTxBW40MHz; // If we use 40 MHz to Tx - u8 PeerBandwidth; - - // For Bandwidth Switching - u8 bSwBwInProgress; - CHNLOP ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15. - u8 SwBwStep; - //struct timer_list SwBwTimer; //moved to ieee80211_device. as timer_list need include some header file here. - - // For Realtek proprietary A-MPDU factor for aggregation - u8 bRegRT2RTAggregation; - u8 RT2RT_HT_Mode; - u8 bCurrentRT2RTAggregation; - u8 bCurrentRT2RTLongSlotTime; - u8 szRT2RTAggBuffer[10]; - - // Rx Reorder control - u8 bRegRxReorderEnable; - u8 bCurRxReorderEnable; - u8 RxReorderWinSize; - u8 RxReorderPendingTime; - u16 RxReorderDropCounter; - - - // Add for Broadcom(Linksys) IOT. Joseph - u8 bIsPeerBcm; - - // For IOT issue. - u8 IOTPeer; - u32 IOTAction; - u8 IOTRaFunc; -} __attribute__ ((packed)) RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT; - - -//------------------------------------------------------------ -// The Data structure is used to keep HT related variable for "each Sta" -// when card is configured as "AP mode" -//------------------------------------------------------------ - -typedef struct _RT_HTINFO_STA_ENTRY{ - u8 bEnableHT; - - u8 bSupportCck; - - u16 AMSDU_MaxSize; - - u8 AMPDU_Factor; - u8 MPDU_Density; - - u8 HTHighestOperaRate; - - u8 bBw40MHz; - - u8 MimoPs; - - u8 McsRateSet[16]; - - -}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY; - - - - - -//------------------------------------------------------------ -// The Data structure is used to keep HT related variable for "each AP" -// when card is configured as "STA mode" -//------------------------------------------------------------ - -typedef struct _BSS_HT{ - - u8 bdSupportHT; - - // HT related elements - u8 bdHTCapBuf[32]; - u16 bdHTCapLen; - u8 bdHTInfoBuf[32]; - u16 bdHTInfoLen; - - HT_SPEC_VER bdHTSpecVer; - HT_CHANNEL_WIDTH bdBandWidth; - - u8 bdRT2RTAggregation; - u8 bdRT2RTLongSlotTime; - u8 RT2RT_HT_Mode; - bool bdHT1R; -} __attribute__ ((packed)) BSS_HT, *PBSS_HT; - -typedef struct _MIMO_RSSI{ - u32 EnableAntenna; - u32 AntennaA; - u32 AntennaB; - u32 AntennaC; - u32 AntennaD; - u32 Average; -}MIMO_RSSI, *PMIMO_RSSI; - -typedef struct _MIMO_EVM{ - u32 EVM1; - u32 EVM2; -}MIMO_EVM, *PMIMO_EVM; - -typedef struct _FALSE_ALARM_STATISTICS{ - u32 Cnt_Parity_Fail; - u32 Cnt_Rate_Illegal; - u32 Cnt_Crc8_fail; - u32 Cnt_all; -}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; - - -extern u8 MCS_FILTER_ALL[16]; -extern u8 MCS_FILTER_1SS[16]; - -/* 2007/07/11 MH Modify the macro. Becaus STA may link with a N-AP. If we set - STA in A/B/G mode and AP is still in N mode. The macro will be wrong. We have - to add a macro to judge wireless mode. */ -#define PICK_RATE(_nLegacyRate, _nMcsRate) \ - (_nMcsRate==0)?(_nLegacyRate&0x7f):(_nMcsRate) -/* 2007/07/12 MH We only define legacy and HT wireless mode now. */ -#define LEGACY_WIRELESS_MODE IEEE_MODE_MASK - -#define CURRENT_RATE(WirelessMode, LegacyRate, HTRate) \ - ((WirelessMode & (LEGACY_WIRELESS_MODE))!=0)?\ - (LegacyRate):\ - (PICK_RATE(LegacyRate, HTRate)) - - - -// MCS Bw 40 {1~7, 12~15,32} -#define RATE_ADPT_1SS_MASK 0xFF -#define RATE_ADPT_2SS_MASK 0xF0 //Skip MCS8~11 because mcs7 > mcs6, 9, 10, 11. 2007.01.16 by Emily -#define RATE_ADPT_MCS32_MASK 0x01 - -#define IS_11N_MCS_RATE(rate) (rate&0x80) - -typedef enum _HT_AGGRE_SIZE{ - HT_AGG_SIZE_8K = 0, - HT_AGG_SIZE_16K = 1, - HT_AGG_SIZE_32K = 2, - HT_AGG_SIZE_64K = 3, -}HT_AGGRE_SIZE_E, *PHT_AGGRE_SIZE_E; - -/* Indicate different AP vendor for IOT issue */ -typedef enum _HT_IOT_PEER -{ - HT_IOT_PEER_UNKNOWN = 0, - HT_IOT_PEER_REALTEK = 1, - HT_IOT_PEER_REALTEK_92SE = 2, - HT_IOT_PEER_BROADCOM = 3, - HT_IOT_PEER_RALINK = 4, - HT_IOT_PEER_ATHEROS = 5, - HT_IOT_PEER_CISCO= 6, - HT_IOT_PEER_MARVELL=7, - HT_IOT_PEER_92U_SOFTAP = 8, - HT_IOT_PEER_SELF_SOFTAP = 9, - HT_IOT_PEER_MAX = 10, -}HT_IOT_PEER_E, *PHTIOT_PEER_E; - -// -// IOT Action for different AP -// -typedef enum _HT_IOT_ACTION{ - HT_IOT_ACT_TX_USE_AMSDU_4K = 0x00000001, - HT_IOT_ACT_TX_USE_AMSDU_8K = 0x00000002, - HT_IOT_ACT_DISABLE_MCS14 = 0x00000004, - HT_IOT_ACT_DISABLE_MCS15 = 0x00000008, - HT_IOT_ACT_DISABLE_ALL_2SS = 0x00000010, - HT_IOT_ACT_DISABLE_EDCA_TURBO = 0x00000020, - HT_IOT_ACT_MGNT_USE_CCK_6M = 0x00000040, - HT_IOT_ACT_CDD_FSYNC = 0x00000080, - HT_IOT_ACT_PURE_N_MODE = 0x00000100, - HT_IOT_ACT_FORCED_CTS2SELF = 0x00000200, - HT_IOT_ACT_FORCED_RTS = 0x00000400, - HT_IOT_ACT_AMSDU_ENABLE = 0x00000800, - HT_IOT_ACT_REJECT_ADDBA_REQ = 0x00001000, - HT_IOT_ACT_ALLOW_PEER_AGG_ONE_PKT = 0x00002000, - HT_IOT_ACT_EDCA_BIAS_ON_RX = 0x00004000, - - HT_IOT_ACT_HYBRID_AGGREGATION = 0x00010000, - HT_IOT_ACT_DISABLE_SHORT_GI = 0x00020000, - HT_IOT_ACT_DISABLE_HIGH_POWER = 0x00040000, - HT_IOT_ACT_DISABLE_TX_40_MHZ = 0x00080000, - HT_IOT_ACT_TX_NO_AGGREGATION = 0x00100000, - HT_IOT_ACT_DISABLE_TX_2SS = 0x00200000, - - HT_IOT_ACT_MID_HIGHPOWER = 0x00400000, - HT_IOT_ACT_NULL_DATA_POWER_SAVING = 0x00800000, - - HT_IOT_ACT_DISABLE_CCK_RATE = 0x01000000, - HT_IOT_ACT_FORCED_ENABLE_BE_TXOP = 0x02000000, - HT_IOT_ACT_WA_IOT_Broadcom = 0x04000000, -}HT_IOT_ACTION_E, *PHT_IOT_ACTION_E; - -typedef enum _HT_IOT_RAFUNC{ - HT_IOT_RAFUNC_DISABLE_ALL = 0x00, - HT_IOT_RAFUNC_PEER_1R = 0x01, - HT_IOT_RAFUNC_TX_AMSDU = 0x02, -}HT_IOT_RAFUNC, *PHT_IOT_RAFUNC; - -typedef enum _RT_HT_CAP{ - RT_HT_CAP_USE_TURBO_AGGR = 0x01, - RT_HT_CAP_USE_LONG_PREAMBLE = 0x02, - RT_HT_CAP_USE_AMPDU = 0x04, - RT_HT_CAP_USE_WOW = 0x8, - RT_HT_CAP_USE_SOFTAP = 0x10, - RT_HT_CAP_USE_92SE = 0x20, -}RT_HT_CAPBILITY, *PRT_HT_CAPBILITY; - -#endif |
