1 files changed, 0 insertions, 123 deletions
diff --git a/drivers/staging/rtl8192e/r8192_pm.c b/drivers/staging/rtl8192e/r8192_pm.c
deleted file mode 100644
index 7bcc4a3..0000000
--- a/drivers/staging/rtl8192e/r8192_pm.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
-   Power management interface routines.
-   Written by Mariusz Matuszek.
-   This code is currently just a placeholder for later work and
-   does not do anything useful.
-
-   This is part of rtl8180 OpenSource driver.
-   Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
-   Released under the terms of GPL (General Public Licence)
-*/
-
-#include "r8192E.h"
-#include "r8192E_hw.h"
-#include "r8192_pm.h"
-#include "r8190_rtl8256.h"
-
-int rtl8192E_save_state (struct pci_dev *dev, pm_message_t state)
-{
-        printk(KERN_NOTICE "r8192E save state call (state %u).\n", state.event);
-	return -EAGAIN;
-}
-
-
-int rtl8192E_suspend (struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u32	ulRegRead;
-
-        RT_TRACE(COMP_POWER, "============> r8192E suspend call.\n");
-	if (!netif_running(dev))
-		goto out_pci_suspend;
-
-	if (dev->netdev_ops->ndo_stop)
-		dev->netdev_ops->ndo_stop(dev);
-
-	// Call MgntActSet_RF_State instead to prevent RF config race condition.
-	if(!priv->ieee80211->bSupportRemoteWakeUp) {
-		MgntActSet_RF_State(priv, eRfOff, RF_CHANGE_BY_INIT);
-		// 2006.11.30. System reset bit
-		ulRegRead = read_nic_dword(priv, CPU_GEN);
-		ulRegRead|=CPU_GEN_SYSTEM_RESET;
-		write_nic_dword(priv, CPU_GEN, ulRegRead);
-	} else {
-		//2008.06.03 for WOL
-		write_nic_dword(priv, WFCRC0, 0xffffffff);
-		write_nic_dword(priv, WFCRC1, 0xffffffff);
-		write_nic_dword(priv, WFCRC2, 0xffffffff);
-		//Write PMR register
-		write_nic_byte(priv, PMR, 0x5);
-		//Disable tx, enanble rx
-		write_nic_byte(priv, MacBlkCtrl, 0xa);
-	}
-
-out_pci_suspend:
-	RT_TRACE(COMP_POWER, "r8192E support WOL call??????????????????????\n");
-	if(priv->ieee80211->bSupportRemoteWakeUp) {
-		RT_TRACE(COMP_POWER, "r8192E support WOL call!!!!!!!!!!!!!!!!!!.\n");
-	}
-	netif_device_detach(dev);
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_enable_wake(pdev, pci_choose_state(pdev,state),
-			priv->ieee80211->bSupportRemoteWakeUp?1:0);
-	pci_set_power_state(pdev,pci_choose_state(pdev,state));
-
-	return 0;
-}
-
-int rtl8192E_resume (struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	int err;
-	u32 val;
-
-        RT_TRACE(COMP_POWER, "================>r8192E resume call.\n");
-
-	pci_set_power_state(pdev, PCI_D0);
-
-	err = pci_enable_device(pdev);
-	if(err) {
-		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
-				dev->name);
-		return err;
-	}
-
-	pci_restore_state(pdev);
-
-	/*
-	 * Suspend/Resume resets the PCI configuration space, so we have to
-	 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
-	 * from interfering with C3 CPU state. pci_restore_state won't help
-	 * here since it only restores the first 64 bytes pci config header.
-	 */
-	pci_read_config_dword(pdev, 0x40, &val);
-	if ((val & 0x0000ff00) != 0) {
-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-	}
-
-
-
-	pci_enable_wake(pdev, PCI_D0, 0);
-
-	if(!netif_running(dev))
-		goto out;
-
-	netif_device_attach(dev);
-
-	if (dev->netdev_ops->ndo_open)
-		dev->netdev_ops->ndo_open(dev);
-
-out:
-        RT_TRACE(COMP_POWER, "<================r8192E resume call.\n");
-	return 0;
-}
-
-
-int rtl8192E_enable_wake (struct pci_dev *dev, pm_message_t state, int enable)
-{
-        printk(KERN_NOTICE "r8192E enable wake call (state %u, enable %d).\n",
-	       state.event, enable);
-	return -EAGAIN;
-}