1 files changed, 0 insertions, 141 deletions
diff --git a/drivers/staging/rtl8192e/r8180_93cx6.c b/drivers/staging/rtl8192e/r8180_93cx6.c
deleted file mode 100644
index 55d4f56..0000000
--- a/drivers/staging/rtl8192e/r8180_93cx6.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
-   This files contains card eeprom (93c46 or 93c56) programming routines,
-   memory is addressed by 16 bits words.
-
-   This is part of rtl8180 OpenSource driver.
-   Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
-   Released under the terms of GPL (General Public Licence)
-
-   Parts of this driver are based on the GPL part of the
-   official realtek driver.
-
-   Parts of this driver are based on the rtl8180 driver skeleton
-   from Patric Schenke & Andres Salomon.
-
-   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
-
-   We want to tanks the Authors of those projects and the Ndiswrapper
-   project Authors.
-*/
-
-#include "r8180_93cx6.h"
-
-static void eprom_cs(struct r8192_priv *priv, short bit)
-{
-	if (bit)
-		write_nic_byte(priv, EPROM_CMD,
-			       (1<<EPROM_CS_SHIFT) |
-			       read_nic_byte(priv, EPROM_CMD)); //enable EPROM
-	else
-		write_nic_byte(priv, EPROM_CMD, read_nic_byte(priv, EPROM_CMD)
-			       &~(1<<EPROM_CS_SHIFT)); //disable EPROM
-
-	udelay(EPROM_DELAY);
-}
-
-
-static void eprom_ck_cycle(struct r8192_priv *priv)
-{
-	write_nic_byte(priv, EPROM_CMD,
-		       (1<<EPROM_CK_SHIFT) | read_nic_byte(priv, EPROM_CMD));
-	udelay(EPROM_DELAY);
-	write_nic_byte(priv, EPROM_CMD,
-		       read_nic_byte(priv, EPROM_CMD) & ~(1<<EPROM_CK_SHIFT));
-	udelay(EPROM_DELAY);
-}
-
-
-static void eprom_w(struct r8192_priv *priv, short bit)
-{
-	if (bit)
-		write_nic_byte(priv, EPROM_CMD, (1<<EPROM_W_SHIFT) |
-			       read_nic_byte(priv, EPROM_CMD));
-	else
-		write_nic_byte(priv, EPROM_CMD, read_nic_byte(priv, EPROM_CMD)
-			       &~(1<<EPROM_W_SHIFT));
-
-	udelay(EPROM_DELAY);
-}
-
-
-static short eprom_r(struct r8192_priv *priv)
-{
-	short bit;
-
-	bit = (read_nic_byte(priv, EPROM_CMD) & (1<<EPROM_R_SHIFT));
-	udelay(EPROM_DELAY);
-
-	if (bit)
-		return 1;
-	return 0;
-}
-
-
-static void eprom_send_bits_string(struct r8192_priv *priv, short b[], int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		eprom_w(priv, b[i]);
-		eprom_ck_cycle(priv);
-	}
-}
-
-
-u32 eprom_read(struct r8192_priv *priv, u32 addr)
-{
-	short read_cmd[] = {1, 1, 0};
-	short addr_str[8];
-	int i;
-	int addr_len;
-	u32 ret;
-
-	ret = 0;
-        //enable EPROM programming
-	write_nic_byte(priv, EPROM_CMD,
-		       (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
-	udelay(EPROM_DELAY);
-
-	if (priv->epromtype == EPROM_93c56) {
-		addr_str[7] = addr & 1;
-		addr_str[6] = addr & (1<<1);
-		addr_str[5] = addr & (1<<2);
-		addr_str[4] = addr & (1<<3);
-		addr_str[3] = addr & (1<<4);
-		addr_str[2] = addr & (1<<5);
-		addr_str[1] = addr & (1<<6);
-		addr_str[0] = addr & (1<<7);
-		addr_len = 8;
-	} else {
-		addr_str[5] = addr & 1;
-		addr_str[4] = addr & (1<<1);
-		addr_str[3] = addr & (1<<2);
-		addr_str[2] = addr & (1<<3);
-		addr_str[1] = addr & (1<<4);
-		addr_str[0] = addr & (1<<5);
-		addr_len = 6;
-	}
-	eprom_cs(priv, 1);
-	eprom_ck_cycle(priv);
-	eprom_send_bits_string(priv, read_cmd, 3);
-	eprom_send_bits_string(priv, addr_str, addr_len);
-
-	//keep chip pin D to low state while reading.
-	//I'm unsure if it is necessary, but anyway shouldn't hurt
-	eprom_w(priv, 0);
-
-	for (i = 0; i < 16; i++) {
-		//eeprom needs a clk cycle between writing opcode&adr
-		//and reading data. (eeprom outs a dummy 0)
-		eprom_ck_cycle(priv);
-		ret |= (eprom_r(priv)<<(15-i));
-	}
-
-	eprom_cs(priv, 0);
-	eprom_ck_cycle(priv);
-
-	//disable EPROM programming
-	write_nic_byte(priv, EPROM_CMD,
-		       (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
-	return ret;
-}