diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/pwrseq.h')
-rw-r--r-- | drivers/staging/rtl8188eu/include/pwrseq.h | 341 |
1 files changed, 341 insertions, 0 deletions
diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h new file mode 100644 index 0000000..43db92d --- /dev/null +++ b/drivers/staging/rtl8188eu/include/pwrseq.h @@ -0,0 +1,341 @@ + +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ + +#ifndef __HAL8188EPWRSEQ_H__ +#define __HAL8188EPWRSEQ_H__ + +#include "pwrseqcmd.h" + +/* + Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd + There are 6 HW Power States: + 0: POFF--Power Off + 1: PDN--Power Down + 2: CARDEMU--Card Emulation + 3: ACT--Active Mode + 4: LPS--Low Power State + 5: SUS--Suspend + + The transision from different states are defined below + TRANS_CARDEMU_TO_ACT + TRANS_ACT_TO_CARDEMU + TRANS_CARDEMU_TO_SUS + TRANS_SUS_TO_CARDEMU + TRANS_CARDEMU_TO_PDN + TRANS_ACT_TO_LPS + TRANS_LPS_TO_ACT + + TRANS_END + + PWR SEQ Version: rtl8188E_PwrSeq_V09.h +*/ +#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10 +#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10 +#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10 +#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10 +#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10 +#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10 +#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15 +#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15 +#define RTL8188E_TRANS_END_STEPS 1 + + +#define RTL8188E_TRANS_CARDEMU_TO_ACT \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value + * }, + * comment here + */ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1}, \ + /* wait till 0x04[17] = 1 power ready*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, \ + /* 0x02[1:0] = 0 reset BB*/ \ + {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \ + /*0x24[23] = 2b'01 schmit trigger */ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \ + /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, \ + /*0x04[12:11] = 2b'00 disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, \ + /*0x04[8] = 1 polling until return 0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, \ + /*wait till 0x04[8] = 0*/ \ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \ + /*LDO normal mode*/ \ + {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \ + /*SDIO Driving*/ + +#define RTL8188E_TRANS_ACT_TO_CARDEMU \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value + * }, + * comments here + */ \ + {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \ + /*0x1F[7:0] = 0 turn off RF*/ \ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \ + /*LDO Sleep mode*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \ + /*0x04[9] = 1 turn off MAC by HW state machine*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, \ + /*wait till 0x04[9] = 0 polling until return 0 to disable*/ + +#define RTL8188E_TRANS_CARDEMU_TO_SUS \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \ + /* 0x04[12:11] = 2b'01enable WL suspend */ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, \ + /* 0x04[12:11] = 2b'11enable WL suspend for PCIe */ \ + {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, 0xFF, BIT7}, \ + /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ + {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT4, 0}, \ + /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ + {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT4, BIT4}, \ + /*Set USB suspend enable local register 0xfe10[4]=1 */ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \ + /*wait power state to suspend*/ + +#define RTL8188E_TRANS_SUS_TO_CARDEMU \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \ + /*wait power state to suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \ + /*0x04[12:11] = 2b'01enable WL suspend*/ + +#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \ + /*0x24[23] = 2b'01 schmit trigger */ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \ + /*0x04[12:11] = 2b'01 enable WL suspend*/ \ + {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, 0xFF, 0}, \ + /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ + {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT4, 0}, \ + /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ + {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \ + /*Set USB suspend enable local register 0xfe10[4]=1 */ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \ + /*wait power state to suspend*/ + +#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \ + /*wait power state to suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \ + /*0x04[12:11] = 2b'01enable WL suspend*/ + +#define RTL8188E_TRANS_CARDEMU_TO_PDN \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \ + /* 0x04[16] = 0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \ + /* 0x04[15] = 1*/ + +#define RTL8188E_TRANS_PDN_TO_CARDEMU \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \ + /* 0x04[15] = 0*/ + +/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */ +#define RTL8188E_TRANS_ACT_TO_LPS \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \ + {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + /*Should be zero if no packet is transmitting*/ \ + {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + /*Should be zero if no packet is transmitting*/ \ + {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + /*Should be zero if no packet is transmitting*/ \ + {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + /*Should be zero if no packet is transmitting*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \ + /*CCK and OFDM are disabled,and clock are gated*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, \ + PWRSEQ_DELAY_US},/*Delay 1us*/ \ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/\ + {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5}, \ + /*Respond TxOK to scheduler*/ + + +#define RTL8188E_TRANS_LPS_TO_ACT \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \ + {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \ + {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \ + {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \ + /* 0x08[4] = 0 switch TSF to 40M */ \ + {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, \ + /* Polling 0x109[7]=0 TSF in 40M */ \ + {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, \ + /* 0x29[7:6] = 2b'00 enable BB clock */ \ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \ + /* 0x101[1] = 1 */ \ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \ + /* 0x100[7:0] = 0xFF enable WMAC TRX */ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, \ + /* 0x02[1:0] = 2b'11 enable BB macro */ \ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/ + +#define RTL8188E_TRANS_END \ + /* format + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, + * value }, + * comments here + */ \ + {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, \ + PWR_CMD_END, 0, 0}, + + +extern struct wl_pwr_cfg rtl8188E_power_on_flow + [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS]; +extern struct wl_pwr_cfg rtl8188E_radio_off_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_END_STEPS]; +extern struct wl_pwr_cfg rtl8188E_card_disable_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wl_pwr_cfg rtl8188E_card_enable_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wl_pwr_cfg rtl8188E_suspend_flow[ + RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wl_pwr_cfg rtl8188E_resume_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wl_pwr_cfg rtl8188E_hwpdn_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS]; +extern struct wl_pwr_cfg rtl8188E_enter_lps_flow + [RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS]; +extern struct wl_pwr_cfg rtl8188E_leave_lps_flow + [RTL8188E_TRANS_LPS_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS]; + +#endif /* __HAL8188EPWRSEQ_H__ */ |