1 files changed, 0 insertions, 66 deletions

diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index c92067f..141f85a 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -420,22 +420,6 @@ static void _InitEDCA(struct adapter *Adapter)
 	rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226);
 }
 
-static void _InitBeaconMaxError(struct adapter *Adapter, bool		InfraMode)
-{
-}
-
-static void _InitHWLed(struct adapter *Adapter)
-{
-	struct led_priv *pledpriv = &(Adapter->ledpriv);
-
-	if (pledpriv->LedStrategy != HW_LED)
-		return;
-
-/*  HW led control */
-/*  to do .... */
-/* must consider cases of antenna diversity/ commbo card/solo card/mini card */
-}
-
 static void _InitRDGSetting(struct adapter *Adapter)
 {
 	rtw_write8(Adapter, REG_RD_CTRL, 0xFF);
@@ -599,10 +583,6 @@ static void InitUsbAggregationSetting(struct adapter *Adapter)
 	haldata->UsbRxHighSpeedMode = false;
 }
 
-static void _InitOperationMode(struct adapter *Adapter)
-{
-}
-
 static void _InitBeaconParameters(struct adapter *Adapter)
 {
 	struct hal_data_8188e	*haldata = GET_HAL_DATA(Adapter);
@@ -713,7 +693,6 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
 	HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
 
 	if (Adapter->pwrctrlpriv.bkeepfwalive) {
-		_ps_open_RF(Adapter);
 
 		if (haldata->odmpriv.RFCalibrateInfo.bIQKInitialized) {
 			PHY_IQCalibrate_8188E(Adapter, true);
@@ -840,14 +819,9 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
 	_InitEDCA(Adapter);
 	_InitRetryFunction(Adapter);
 	InitUsbAggregationSetting(Adapter);
-	_InitOperationMode(Adapter);/* todo */
 	_InitBeaconParameters(Adapter);
-	_InitBeaconMaxError(Adapter, true);
-
-	/*  */
 	/*  Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */
 	/*  Hw bug which Hw initials RxFF boundary size to a value which is larger than the real Rx buffer size in 88E. */
-	/*  */
 	/*  Enable MACTXEN/MACRXEN block */
 	value16 = rtw_read16(Adapter, REG_CR);
 	value16 |= (MACTXEN | MACRXEN);
@@ -870,8 +844,6 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
 	rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400);	/*  unit: 256us. 256ms */
 	rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400);	/*  unit: 256us. 256ms */
 
-	_InitHWLed(Adapter);
-
 	/* Keep RfRegChnlVal for later use. */
 	haldata->RfRegChnlVal[0] = PHY_QueryRFReg(Adapter, (enum rf_radio_path)0, RF_CHNLBW, bRFRegOffsetMask);
 	haldata->RfRegChnlVal[1] = PHY_QueryRFReg(Adapter, (enum rf_radio_path)1, RF_CHNLBW, bRFRegOffsetMask);
@@ -970,18 +942,6 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
 	return status;
 }
 
-void _ps_open_RF(struct adapter *adapt)
-{
-	/* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */
-	/* phy_SsPwrSwitch92CU(adapt, rf_on, 1); */
-}
-
-static void _ps_close_RF(struct adapter *adapt)
-{
-	/* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */
-	/* phy_SsPwrSwitch92CU(adapt, rf_off, 1); */
-}
-
 static void CardDisableRTL8188EU(struct adapter *Adapter)
 {
 	u8 val8;
@@ -1059,7 +1019,6 @@ static u32 rtl8188eu_hal_deinit(struct adapter *Adapter)
 
 	DBG_88E("bkeepfwalive(%x)\n", Adapter->pwrctrlpriv.bkeepfwalive);
 	if (Adapter->pwrctrlpriv.bkeepfwalive) {
-		_ps_close_RF(Adapter);
 		if ((Adapter->pwrctrlpriv.bHWPwrPindetect) && (Adapter->pwrctrlpriv.bHWPowerdown))
 			rtl8192cu_hw_power_down(Adapter);
 	} else {
@@ -1129,16 +1088,6 @@ static unsigned int rtl8188eu_inirp_deinit(struct adapter *Adapter)
 /*	EEPROM/EFUSE Content Parsing */
 /*  */
 /*  */
-static void _ReadLEDSetting(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail)
-{
-	struct led_priv *pledpriv = &(Adapter->ledpriv);
-	struct hal_data_8188e	*haldata = GET_HAL_DATA(Adapter);
-
-	pledpriv->bRegUseLed = true;
-	pledpriv->LedStrategy = SW_LED_MODE1;
-	haldata->bLedOpenDrain = true;/*  Support Open-drain arrangement for controlling the LED. */
-}
-
 static void Hal_EfuseParsePIDVID_8188EU(struct adapter *adapt, u8 *hwinfo, bool AutoLoadFail)
 {
 	struct hal_data_8188e	*haldata = GET_HAL_DATA(adapt);
@@ -1184,10 +1133,6 @@ static void Hal_EfuseParseMACAddr_8188EU(struct adapter *adapt, u8 *hwinfo, bool
 		 eeprom->mac_addr[4], eeprom->mac_addr[5]));
 }
 
-static void Hal_CustomizeByCustomerID_8188EU(struct adapter *adapt)
-{
-}
-
 static void
 readAdapterInfo_8188EU(
 		struct adapter *adapt
@@ -1214,9 +1159,6 @@ readAdapterInfo_8188EU(
 	/*  The following part initialize some vars by PG info. */
 	/*  */
 	Hal_InitChannelPlan(adapt);
-	Hal_CustomizeByCustomerID_8188EU(adapt);
-
-	_ReadLEDSetting(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
 }
 
 static void _ReadPROMContent(
@@ -2284,12 +2226,6 @@ static void rtl8188eu_init_default_value(struct adapter *adapt)
 		haldata->odmpriv.RFCalibrateInfo.ThermalValue_HP[i] = 0;
 }
 
-static u8 rtl8188eu_ps_func(struct adapter *Adapter, enum hal_intf_ps_func efunc_id, u8 *val)
-{
-	u8 bResult = true;
-	return bResult;
-}
-
 void rtl8188eu_set_hal_ops(struct adapter *adapt)
 {
 	struct hal_ops	*halfunc = &adapt->HalFunc;
@@ -2330,7 +2266,5 @@ void rtl8188eu_set_hal_ops(struct adapter *adapt)
 	halfunc->hal_xmit = &rtl8188eu_hal_xmit;
 	halfunc->mgnt_xmit = &rtl8188eu_mgnt_xmit;
 
-	halfunc->interface_ps_func = &rtl8188eu_ps_func;
-
 	rtl8188e_set_hal_ops(halfunc);
 }