1 files changed, 0 insertions, 111 deletions
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h
deleted file mode 100644
index 215e7ec..0000000
--- a/drivers/staging/olpc_dcon/olpc_dcon.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef OLPC_DCON_H_
-#define OLPC_DCON_H_
-
-#include <linux/notifier.h>
-#include <linux/workqueue.h>
-
-/* DCON registers */
-
-#define DCON_REG_ID		 0
-#define DCON_REG_MODE		 1
-
-#define MODE_PASSTHRU	(1<<0)
-#define MODE_SLEEP	(1<<1)
-#define MODE_SLEEP_AUTO	(1<<2)
-#define MODE_BL_ENABLE	(1<<3)
-#define MODE_BLANK	(1<<4)
-#define MODE_CSWIZZLE	(1<<5)
-#define MODE_COL_AA	(1<<6)
-#define MODE_MONO_LUMA	(1<<7)
-#define MODE_SCAN_INT	(1<<8)
-#define MODE_CLOCKDIV	(1<<9)
-#define MODE_DEBUG	(1<<14)
-#define MODE_SELFTEST	(1<<15)
-
-#define DCON_REG_HRES		0x2
-#define DCON_REG_HTOTAL		0x3
-#define DCON_REG_HSYNC_WIDTH	0x4
-#define DCON_REG_VRES		0x5
-#define DCON_REG_VTOTAL		0x6
-#define DCON_REG_VSYNC_WIDTH	0x7
-#define DCON_REG_TIMEOUT	0x8
-#define DCON_REG_SCAN_INT	0x9
-#define DCON_REG_BRIGHT		0xa
-#define DCON_REG_MEM_OPT_A	0x41
-#define DCON_REG_MEM_OPT_B	0x42
-
-/* Load Delay Locked Loop (DLL) settings for clock delay */
-#define MEM_DLL_CLOCK_DELAY	(1<<0)
-/* Memory controller power down function */
-#define MEM_POWER_DOWN		(1<<8)
-/* Memory controller software reset */
-#define MEM_SOFT_RESET		(1<<0)
-
-/* Status values */
-
-#define DCONSTAT_SCANINT	0
-#define DCONSTAT_SCANINT_DCON	1
-#define DCONSTAT_DISPLAYLOAD	2
-#define DCONSTAT_MISSED		3
-
-/* Source values */
-
-#define DCON_SOURCE_DCON        0
-#define DCON_SOURCE_CPU         1
-
-/* Interrupt */
-#define DCON_IRQ                6
-
-struct dcon_priv {
-	struct i2c_client *client;
-	struct fb_info *fbinfo;
-	struct backlight_device *bl_dev;
-
-	wait_queue_head_t waitq;
-	struct work_struct switch_source;
-	struct notifier_block reboot_nb;
-
-	/* Shadow register for the DCON_REG_MODE register */
-	u8 disp_mode;
-
-	/* The current backlight value - this saves us some smbus traffic */
-	u8 bl_val;
-
-	/* Current source, initialized at probe time */
-	int curr_src;
-
-	/* Desired source */
-	int pending_src;
-
-	/* Variables used during switches */
-	bool switched;
-	ktime_t irq_time;
-	ktime_t load_time;
-
-	/* Current output type; true == mono, false == color */
-	bool mono;
-	bool asleep;
-	/* This get set while controlling fb blank state from the driver */
-	bool ignore_fb_events;
-};
-
-struct dcon_platform_data {
-	int (*init)(struct dcon_priv *);
-	void (*bus_stabilize_wiggle)(void);
-	void (*set_dconload)(int);
-	int (*read_status)(u8 *);
-};
-
-#include <linux/interrupt.h>
-
-irqreturn_t dcon_interrupt(int irq, void *id);
-
-#ifdef CONFIG_FB_OLPC_DCON_1
-extern struct dcon_platform_data dcon_pdata_xo_1;
-#endif
-
-#ifdef CONFIG_FB_OLPC_DCON_1_5
-extern struct dcon_platform_data dcon_pdata_xo_1_5;
-#endif
-
-#endif