diff options
Diffstat (limited to 'drivers/staging/media/as102/as102_fw.c')
-rw-r--r-- | drivers/staging/media/as102/as102_fw.c | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/drivers/staging/media/as102/as102_fw.c b/drivers/staging/media/as102/as102_fw.c new file mode 100644 index 0000000..c019df9 --- /dev/null +++ b/drivers/staging/media/as102/as102_fw.c @@ -0,0 +1,251 @@ +/* + * Abilis Systems Single DVB-T Receiver + * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com> + * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/firmware.h> + +#include "as102_drv.h" +#include "as102_fw.h" + +#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) +char as102_st_fw1[] = "as102_data1_st.hex"; +char as102_st_fw2[] = "as102_data2_st.hex"; +char as102_dt_fw1[] = "as102_data1_dt.hex"; +char as102_dt_fw2[] = "as102_data2_dt.hex"; + +static unsigned char atohx(unsigned char *dst, char *src) +{ + unsigned char value = 0; + + char msb = tolower(*src) - '0'; + char lsb = tolower(*(src + 1)) - '0'; + + if (msb > 9) + msb -= 7; + if (lsb > 9) + lsb -= 7; + + *dst = value = ((msb & 0xF) << 4) | (lsb & 0xF); + return value; +} + +/* + * Parse INTEL HEX firmware file to extract address and data. + */ +static int parse_hex_line(unsigned char *fw_data, unsigned char *addr, + unsigned char *data, int *dataLength, + unsigned char *addr_has_changed) { + + int count = 0; + unsigned char *src, dst; + + if (*fw_data++ != ':') { + printk(KERN_ERR "invalid firmware file\n"); + return -EFAULT; + } + + /* locate end of line */ + for (src = fw_data; *src != '\n'; src += 2) { + atohx(&dst, src); + /* parse line to split addr / data */ + switch (count) { + case 0: + *dataLength = dst; + break; + case 1: + addr[2] = dst; + break; + case 2: + addr[3] = dst; + break; + case 3: + /* check if data is an address */ + if (dst == 0x04) + *addr_has_changed = 1; + else + *addr_has_changed = 0; + break; + case 4: + case 5: + if (*addr_has_changed) + addr[(count - 4)] = dst; + else + data[(count - 4)] = dst; + break; + default: + data[(count - 4)] = dst; + break; + } + count++; + } + + /* return read value + ':' + '\n' */ + return (count * 2) + 2; +} + +static int as102_firmware_upload(struct as102_bus_adapter_t *bus_adap, + unsigned char *cmd, + const struct firmware *firmware) { + + struct as10x_fw_pkt_t fw_pkt; + int total_read_bytes = 0, errno = 0; + unsigned char addr_has_changed = 0; + + ENTER(); + + for (total_read_bytes = 0; total_read_bytes < firmware->size; ) { + int read_bytes = 0, data_len = 0; + + /* parse intel hex line */ + read_bytes = parse_hex_line( + (u8 *) (firmware->data + total_read_bytes), + fw_pkt.raw.address, + fw_pkt.raw.data, + &data_len, + &addr_has_changed); + + if (read_bytes <= 0) + goto error; + + /* detect the end of file */ + total_read_bytes += read_bytes; + if (total_read_bytes == firmware->size) { + fw_pkt.u.request[0] = 0x00; + fw_pkt.u.request[1] = 0x03; + + /* send EOF command */ + errno = bus_adap->ops->upload_fw_pkt(bus_adap, + (uint8_t *) + &fw_pkt, 2, 0); + if (errno < 0) + goto error; + } else { + if (!addr_has_changed) { + /* prepare command to send */ + fw_pkt.u.request[0] = 0x00; + fw_pkt.u.request[1] = 0x01; + + data_len += sizeof(fw_pkt.u.request); + data_len += sizeof(fw_pkt.raw.address); + + /* send cmd to device */ + errno = bus_adap->ops->upload_fw_pkt(bus_adap, + (uint8_t *) + &fw_pkt, + data_len, + 0); + if (errno < 0) + goto error; + } + } + } +error: + LEAVE(); + return (errno == 0) ? total_read_bytes : errno; +} + +int as102_fw_upload(struct as102_bus_adapter_t *bus_adap) +{ + int errno = -EFAULT; + const struct firmware *firmware; + unsigned char *cmd_buf = NULL; + char *fw1, *fw2; + +#if defined(CONFIG_AS102_USB) + struct usb_device *dev = bus_adap->usb_dev; +#endif +#if defined(CONFIG_AS102_SPI) + struct spi_device *dev = bus_adap->spi_dev; +#endif + ENTER(); + + /* select fw file to upload */ + if (dual_tuner) { + fw1 = as102_dt_fw1; + fw2 = as102_dt_fw2; + } else { + fw1 = as102_st_fw1; + fw2 = as102_st_fw2; + } + +#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) + /* allocate buffer to store firmware upload command and data */ + cmd_buf = kzalloc(MAX_FW_PKT_SIZE, GFP_KERNEL); + if (cmd_buf == NULL) { + errno = -ENOMEM; + goto error; + } + + /* request kernel to locate firmware file: part1 */ + errno = request_firmware(&firmware, fw1, &dev->dev); + if (errno < 0) { + printk(KERN_ERR "%s: unable to locate firmware file: %s\n", + DRIVER_NAME, fw1); + goto error; + } + + /* initiate firmware upload */ + errno = as102_firmware_upload(bus_adap, cmd_buf, firmware); + if (errno < 0) { + printk(KERN_ERR "%s: error during firmware upload part1\n", + DRIVER_NAME); + goto error; + } + + printk(KERN_INFO "%s: fimrware: %s loaded with success\n", + DRIVER_NAME, fw1); + release_firmware(firmware); + + /* wait for boot to complete */ + mdelay(100); + + /* request kernel to locate firmware file: part2 */ + errno = request_firmware(&firmware, fw2, &dev->dev); + if (errno < 0) { + printk(KERN_ERR "%s: unable to locate firmware file: %s\n", + DRIVER_NAME, fw2); + goto error; + } + + /* initiate firmware upload */ + errno = as102_firmware_upload(bus_adap, cmd_buf, firmware); + if (errno < 0) { + printk(KERN_ERR "%s: error during firmware upload part2\n", + DRIVER_NAME); + goto error; + } + + printk(KERN_INFO "%s: fimrware: %s loaded with success\n", + DRIVER_NAME, fw2); +error: + /* free data buffer */ + kfree(cmd_buf); + /* release firmware if needed */ + if (firmware != NULL) + release_firmware(firmware); +#endif + LEAVE(); + return errno; +} +#endif + +/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */ |