diff options
Diffstat (limited to 'drivers/staging/iio/accel/sca3000_core.c')
-rw-r--r-- | drivers/staging/iio/accel/sca3000_core.c | 1210 |
1 files changed, 0 insertions, 1210 deletions
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c deleted file mode 100644 index 564b36d..0000000 --- a/drivers/staging/iio/accel/sca3000_core.c +++ /dev/null @@ -1,1210 +0,0 @@ -/* - * sca3000_core.c -- support VTI sca3000 series accelerometers via SPI - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * Copyright (c) 2009 Jonathan Cameron <jic23@kernel.org> - * - * See industrialio/accels/sca3000.h for comments. - */ - -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/device.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/spi/spi.h> -#include <linux/sysfs.h> -#include <linux/module.h> -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/events.h> -#include <linux/iio/buffer.h> - -#include "sca3000.h" - -enum sca3000_variant { - d01, - e02, - e04, - e05, -}; - -/* - * Note where option modes are not defined, the chip simply does not - * support any. - * Other chips in the sca3000 series use i2c and are not included here. - * - * Some of these devices are only listed in the family data sheet and - * do not actually appear to be available. - */ -static const struct sca3000_chip_info sca3000_spi_chip_info_tbl[] = { - [d01] = { - .scale = 7357, - .temp_output = true, - .measurement_mode_freq = 250, - .option_mode_1 = SCA3000_OP_MODE_BYPASS, - .option_mode_1_freq = 250, - .mot_det_mult_xz = {50, 100, 200, 350, 650, 1300}, - .mot_det_mult_y = {50, 100, 150, 250, 450, 850, 1750}, - }, - [e02] = { - .scale = 9810, - .measurement_mode_freq = 125, - .option_mode_1 = SCA3000_OP_MODE_NARROW, - .option_mode_1_freq = 63, - .mot_det_mult_xz = {100, 150, 300, 550, 1050, 2050}, - .mot_det_mult_y = {50, 100, 200, 350, 700, 1350, 2700}, - }, - [e04] = { - .scale = 19620, - .measurement_mode_freq = 100, - .option_mode_1 = SCA3000_OP_MODE_NARROW, - .option_mode_1_freq = 50, - .option_mode_2 = SCA3000_OP_MODE_WIDE, - .option_mode_2_freq = 400, - .mot_det_mult_xz = {200, 300, 600, 1100, 2100, 4100}, - .mot_det_mult_y = {100, 200, 400, 7000, 1400, 2700, 54000}, - }, - [e05] = { - .scale = 61313, - .measurement_mode_freq = 200, - .option_mode_1 = SCA3000_OP_MODE_NARROW, - .option_mode_1_freq = 50, - .option_mode_2 = SCA3000_OP_MODE_WIDE, - .option_mode_2_freq = 400, - .mot_det_mult_xz = {600, 900, 1700, 3200, 6100, 11900}, - .mot_det_mult_y = {300, 600, 1200, 2000, 4100, 7800, 15600}, - }, -}; - -int sca3000_write_reg(struct sca3000_state *st, u8 address, u8 val) -{ - st->tx[0] = SCA3000_WRITE_REG(address); - st->tx[1] = val; - return spi_write(st->us, st->tx, 2); -} - -int sca3000_read_data_short(struct sca3000_state *st, - u8 reg_address_high, - int len) -{ - struct spi_transfer xfer[2] = { - { - .len = 1, - .tx_buf = st->tx, - }, { - .len = len, - .rx_buf = st->rx, - } - }; - st->tx[0] = SCA3000_READ_REG(reg_address_high); - - return spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer)); -} - -/** - * sca3000_reg_lock_on() test if the ctrl register lock is on - * - * Lock must be held. - **/ -static int sca3000_reg_lock_on(struct sca3000_state *st) -{ - int ret; - - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_STATUS, 1); - if (ret < 0) - return ret; - - return !(st->rx[0] & SCA3000_LOCKED); -} - -/** - * __sca3000_unlock_reg_lock() unlock the control registers - * - * Note the device does not appear to support doing this in a single transfer. - * This should only ever be used as part of ctrl reg read. - * Lock must be held before calling this - **/ -static int __sca3000_unlock_reg_lock(struct sca3000_state *st) -{ - struct spi_transfer xfer[3] = { - { - .len = 2, - .cs_change = 1, - .tx_buf = st->tx, - }, { - .len = 2, - .cs_change = 1, - .tx_buf = st->tx + 2, - }, { - .len = 2, - .tx_buf = st->tx + 4, - }, - }; - st->tx[0] = SCA3000_WRITE_REG(SCA3000_REG_ADDR_UNLOCK); - st->tx[1] = 0x00; - st->tx[2] = SCA3000_WRITE_REG(SCA3000_REG_ADDR_UNLOCK); - st->tx[3] = 0x50; - st->tx[4] = SCA3000_WRITE_REG(SCA3000_REG_ADDR_UNLOCK); - st->tx[5] = 0xA0; - - return spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer)); -} - -/** - * sca3000_write_ctrl_reg() write to a lock protect ctrl register - * @sel: selects which registers we wish to write to - * @val: the value to be written - * - * Certain control registers are protected against overwriting by the lock - * register and use a shared write address. This function allows writing of - * these registers. - * Lock must be held. - **/ -static int sca3000_write_ctrl_reg(struct sca3000_state *st, - u8 sel, - uint8_t val) -{ - int ret; - - ret = sca3000_reg_lock_on(st); - if (ret < 0) - goto error_ret; - if (ret) { - ret = __sca3000_unlock_reg_lock(st); - if (ret) - goto error_ret; - } - - /* Set the control select register */ - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_CTRL_SEL, sel); - if (ret) - goto error_ret; - - /* Write the actual value into the register */ - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_CTRL_DATA, val); - -error_ret: - return ret; -} - -/** - * sca3000_read_ctrl_reg() read from lock protected control register. - * - * Lock must be held. - **/ -static int sca3000_read_ctrl_reg(struct sca3000_state *st, - u8 ctrl_reg) -{ - int ret; - - ret = sca3000_reg_lock_on(st); - if (ret < 0) - goto error_ret; - if (ret) { - ret = __sca3000_unlock_reg_lock(st); - if (ret) - goto error_ret; - } - /* Set the control select register */ - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_CTRL_SEL, ctrl_reg); - if (ret) - goto error_ret; - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_CTRL_DATA, 1); - if (ret) - goto error_ret; - return st->rx[0]; -error_ret: - return ret; -} - -/** - * sca3000_show_rev() - sysfs interface to read the chip revision number - **/ -static ssize_t sca3000_show_rev(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int len = 0, ret; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_REVID, 1); - if (ret < 0) - goto error_ret; - len += sprintf(buf + len, - "major=%d, minor=%d\n", - st->rx[0] & SCA3000_REVID_MAJOR_MASK, - st->rx[0] & SCA3000_REVID_MINOR_MASK); -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -/** - * sca3000_show_available_measurement_modes() display available modes - * - * This is all read from chip specific data in the driver. Not all - * of the sca3000 series support modes other than normal. - **/ -static ssize_t -sca3000_show_available_measurement_modes(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int len = 0; - - len += sprintf(buf + len, "0 - normal mode"); - switch (st->info->option_mode_1) { - case SCA3000_OP_MODE_NARROW: - len += sprintf(buf + len, ", 1 - narrow mode"); - break; - case SCA3000_OP_MODE_BYPASS: - len += sprintf(buf + len, ", 1 - bypass mode"); - break; - } - switch (st->info->option_mode_2) { - case SCA3000_OP_MODE_WIDE: - len += sprintf(buf + len, ", 2 - wide mode"); - break; - } - /* always supported */ - len += sprintf(buf + len, " 3 - motion detection\n"); - - return len; -} - -/** - * sca3000_show_measurement_mode() sysfs read of current mode - **/ -static ssize_t -sca3000_show_measurement_mode(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int len = 0, ret; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - /* mask bottom 2 bits - only ones that are relevant */ - st->rx[0] &= 0x03; - switch (st->rx[0]) { - case SCA3000_MEAS_MODE_NORMAL: - len += sprintf(buf + len, "0 - normal mode\n"); - break; - case SCA3000_MEAS_MODE_MOT_DET: - len += sprintf(buf + len, "3 - motion detection\n"); - break; - case SCA3000_MEAS_MODE_OP_1: - switch (st->info->option_mode_1) { - case SCA3000_OP_MODE_NARROW: - len += sprintf(buf + len, "1 - narrow mode\n"); - break; - case SCA3000_OP_MODE_BYPASS: - len += sprintf(buf + len, "1 - bypass mode\n"); - break; - } - break; - case SCA3000_MEAS_MODE_OP_2: - switch (st->info->option_mode_2) { - case SCA3000_OP_MODE_WIDE: - len += sprintf(buf + len, "2 - wide mode\n"); - break; - } - break; - } - -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -/** - * sca3000_store_measurement_mode() set the current mode - **/ -static ssize_t -sca3000_store_measurement_mode(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - u8 mask = 0x03; - u8 val; - - mutex_lock(&st->lock); - ret = kstrtou8(buf, 10, &val); - if (ret) - goto error_ret; - if (val > 3) { - ret = -EINVAL; - goto error_ret; - } - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - st->rx[0] &= ~mask; - st->rx[0] |= (val & mask); - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, st->rx[0]); - if (ret) - goto error_ret; - mutex_unlock(&st->lock); - - return len; - -error_ret: - mutex_unlock(&st->lock); - - return ret; -} - -/* - * Not even vaguely standard attributes so defined here rather than - * in the relevant IIO core headers - */ -static IIO_DEVICE_ATTR(measurement_mode_available, S_IRUGO, - sca3000_show_available_measurement_modes, - NULL, 0); - -static IIO_DEVICE_ATTR(measurement_mode, S_IRUGO | S_IWUSR, - sca3000_show_measurement_mode, - sca3000_store_measurement_mode, - 0); - -/* More standard attributes */ - -static IIO_DEVICE_ATTR(revision, S_IRUGO, sca3000_show_rev, NULL, 0); - -static const struct iio_event_spec sca3000_event = { - .type = IIO_EV_TYPE_MAG, - .dir = IIO_EV_DIR_RISING, - .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), -}; - -#define SCA3000_CHAN(index, mod) \ - { \ - .type = IIO_ACCEL, \ - .modified = 1, \ - .channel2 = mod, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ - .address = index, \ - .scan_index = index, \ - .scan_type = { \ - .sign = 's', \ - .realbits = 11, \ - .storagebits = 16, \ - .shift = 5, \ - }, \ - .event_spec = &sca3000_event, \ - .num_event_specs = 1, \ - } - -static const struct iio_chan_spec sca3000_channels[] = { - SCA3000_CHAN(0, IIO_MOD_X), - SCA3000_CHAN(1, IIO_MOD_Y), - SCA3000_CHAN(2, IIO_MOD_Z), -}; - -static const struct iio_chan_spec sca3000_channels_with_temp[] = { - SCA3000_CHAN(0, IIO_MOD_X), - SCA3000_CHAN(1, IIO_MOD_Y), - SCA3000_CHAN(2, IIO_MOD_Z), - { - .type = IIO_TEMP, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_OFFSET), - /* No buffer support */ - .scan_index = -1, - }, -}; - -static u8 sca3000_addresses[3][3] = { - [0] = {SCA3000_REG_ADDR_X_MSB, SCA3000_REG_CTRL_SEL_MD_X_TH, - SCA3000_MD_CTRL_OR_X}, - [1] = {SCA3000_REG_ADDR_Y_MSB, SCA3000_REG_CTRL_SEL_MD_Y_TH, - SCA3000_MD_CTRL_OR_Y}, - [2] = {SCA3000_REG_ADDR_Z_MSB, SCA3000_REG_CTRL_SEL_MD_Z_TH, - SCA3000_MD_CTRL_OR_Z}, -}; - -/** - * __sca3000_get_base_freq() obtain mode specific base frequency - * - * lock must be held - **/ -static inline int __sca3000_get_base_freq(struct sca3000_state *st, - const struct sca3000_chip_info *info, - int *base_freq) -{ - int ret; - - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - switch (0x03 & st->rx[0]) { - case SCA3000_MEAS_MODE_NORMAL: - *base_freq = info->measurement_mode_freq; - break; - case SCA3000_MEAS_MODE_OP_1: - *base_freq = info->option_mode_1_freq; - break; - case SCA3000_MEAS_MODE_OP_2: - *base_freq = info->option_mode_2_freq; - break; - default: - ret = -EINVAL; - } -error_ret: - return ret; -} - -/** - * read_raw handler for IIO_CHAN_INFO_SAMP_FREQ - * - * lock must be held - **/ -static int read_raw_samp_freq(struct sca3000_state *st, int *val) -{ - int ret; - - ret = __sca3000_get_base_freq(st, st->info, val); - if (ret) - return ret; - - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); - if (ret < 0) - return ret; - - if (*val > 0) { - ret &= SCA3000_OUT_CTRL_BUF_DIV_MASK; - switch (ret) { - case SCA3000_OUT_CTRL_BUF_DIV_2: - *val /= 2; - break; - case SCA3000_OUT_CTRL_BUF_DIV_4: - *val /= 4; - break; - } - } - - return 0; -} - -/** - * write_raw handler for IIO_CHAN_INFO_SAMP_FREQ - * - * lock must be held - **/ -static int write_raw_samp_freq(struct sca3000_state *st, int val) -{ - int ret, base_freq, ctrlval; - - ret = __sca3000_get_base_freq(st, st->info, &base_freq); - if (ret) - return ret; - - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); - if (ret < 0) - return ret; - - ctrlval = ret & ~SCA3000_OUT_CTRL_BUF_DIV_MASK; - - if (val == base_freq / 2) - ctrlval |= SCA3000_OUT_CTRL_BUF_DIV_2; - if (val == base_freq / 4) - ctrlval |= SCA3000_OUT_CTRL_BUF_DIV_4; - else if (val != base_freq) - return -EINVAL; - - return sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL, - ctrlval); -} - -static int sca3000_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - u8 address; - - switch (mask) { - case IIO_CHAN_INFO_RAW: - mutex_lock(&st->lock); - if (chan->type == IIO_ACCEL) { - if (st->mo_det_use_count) { - mutex_unlock(&st->lock); - return -EBUSY; - } - address = sca3000_addresses[chan->address][0]; - ret = sca3000_read_data_short(st, address, 2); - if (ret < 0) { - mutex_unlock(&st->lock); - return ret; - } - *val = (be16_to_cpup((__be16 *)st->rx) >> 3) & 0x1FFF; - *val = ((*val) << (sizeof(*val) * 8 - 13)) >> - (sizeof(*val) * 8 - 13); - } else { - /* get the temperature when available */ - ret = sca3000_read_data_short(st, - SCA3000_REG_ADDR_TEMP_MSB, - 2); - if (ret < 0) { - mutex_unlock(&st->lock); - return ret; - } - *val = ((st->rx[0] & 0x3F) << 3) | - ((st->rx[1] & 0xE0) >> 5); - } - mutex_unlock(&st->lock); - return IIO_VAL_INT; - case IIO_CHAN_INFO_SCALE: - *val = 0; - if (chan->type == IIO_ACCEL) - *val2 = st->info->scale; - else /* temperature */ - *val2 = 555556; - return IIO_VAL_INT_PLUS_MICRO; - case IIO_CHAN_INFO_OFFSET: - *val = -214; - *val2 = 600000; - return IIO_VAL_INT_PLUS_MICRO; - case IIO_CHAN_INFO_SAMP_FREQ: - mutex_lock(&st->lock); - ret = read_raw_samp_freq(st, val); - mutex_unlock(&st->lock); - return ret ? ret : IIO_VAL_INT; - default: - return -EINVAL; - } -} - -static int sca3000_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, int val2, long mask) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - - switch (mask) { - case IIO_CHAN_INFO_SAMP_FREQ: - if (val2) - return -EINVAL; - mutex_lock(&st->lock); - ret = write_raw_samp_freq(st, val); - mutex_unlock(&st->lock); - return ret; - default: - return -EINVAL; - } - - return ret; -} - -/** - * sca3000_read_av_freq() sysfs function to get available frequencies - * - * The later modes are only relevant to the ring buffer - and depend on current - * mode. Note that data sheet gives rather wide tolerances for these so integer - * division will give good enough answer and not all chips have them specified - * at all. - **/ -static ssize_t sca3000_read_av_freq(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int len = 0, ret, val; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - val = st->rx[0]; - mutex_unlock(&st->lock); - if (ret) - goto error_ret; - - switch (val & 0x03) { - case SCA3000_MEAS_MODE_NORMAL: - len += sprintf(buf + len, "%d %d %d\n", - st->info->measurement_mode_freq, - st->info->measurement_mode_freq / 2, - st->info->measurement_mode_freq / 4); - break; - case SCA3000_MEAS_MODE_OP_1: - len += sprintf(buf + len, "%d %d %d\n", - st->info->option_mode_1_freq, - st->info->option_mode_1_freq / 2, - st->info->option_mode_1_freq / 4); - break; - case SCA3000_MEAS_MODE_OP_2: - len += sprintf(buf + len, "%d %d %d\n", - st->info->option_mode_2_freq, - st->info->option_mode_2_freq / 2, - st->info->option_mode_2_freq / 4); - break; - } - return len; -error_ret: - return ret; -} - -/* - * Should only really be registered if ring buffer support is compiled in. - * Does no harm however and doing it right would add a fair bit of complexity - */ -static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq); - -/** - * sca3000_read_thresh() - query of a threshold - **/ -static int sca3000_read_thresh(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int *val, int *val2) -{ - int ret, i; - struct sca3000_state *st = iio_priv(indio_dev); - int num = chan->channel2; - - mutex_lock(&st->lock); - ret = sca3000_read_ctrl_reg(st, sca3000_addresses[num][1]); - mutex_unlock(&st->lock); - if (ret < 0) - return ret; - *val = 0; - if (num == 1) - for_each_set_bit(i, (unsigned long *)&ret, - ARRAY_SIZE(st->info->mot_det_mult_y)) - *val += st->info->mot_det_mult_y[i]; - else - for_each_set_bit(i, (unsigned long *)&ret, - ARRAY_SIZE(st->info->mot_det_mult_xz)) - *val += st->info->mot_det_mult_xz[i]; - - return IIO_VAL_INT; -} - -/** - * sca3000_write_thresh() control of threshold - **/ -static int sca3000_write_thresh(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int val, int val2) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int num = chan->channel2; - int ret; - int i; - u8 nonlinear = 0; - - if (num == 1) { - i = ARRAY_SIZE(st->info->mot_det_mult_y); - while (i > 0) - if (val >= st->info->mot_det_mult_y[--i]) { - nonlinear |= (1 << i); - val -= st->info->mot_det_mult_y[i]; - } - } else { - i = ARRAY_SIZE(st->info->mot_det_mult_xz); - while (i > 0) - if (val >= st->info->mot_det_mult_xz[--i]) { - nonlinear |= (1 << i); - val -= st->info->mot_det_mult_xz[i]; - } - } - - mutex_lock(&st->lock); - ret = sca3000_write_ctrl_reg(st, sca3000_addresses[num][1], nonlinear); - mutex_unlock(&st->lock); - - return ret; -} - -static struct attribute *sca3000_attributes[] = { - &iio_dev_attr_revision.dev_attr.attr, - &iio_dev_attr_measurement_mode_available.dev_attr.attr, - &iio_dev_attr_measurement_mode.dev_attr.attr, - &iio_dev_attr_sampling_frequency_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group sca3000_attribute_group = { - .attrs = sca3000_attributes, -}; - -/** - * sca3000_event_handler() - handling ring and non ring events - * - * Ring related interrupt handler. Depending on event, push to - * the ring buffer event chrdev or the event one. - * - * This function is complicated by the fact that the devices can signify ring - * and non ring events via the same interrupt line and they can only - * be distinguished via a read of the relevant status register. - **/ -static irqreturn_t sca3000_event_handler(int irq, void *private) -{ - struct iio_dev *indio_dev = private; - struct sca3000_state *st = iio_priv(indio_dev); - int ret, val; - s64 last_timestamp = iio_get_time_ns(indio_dev); - - /* - * Could lead if badly timed to an extra read of status reg, - * but ensures no interrupt is missed. - */ - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_STATUS, 1); - val = st->rx[0]; - mutex_unlock(&st->lock); - if (ret) - goto done; - - sca3000_ring_int_process(val, indio_dev->buffer); - - if (val & SCA3000_INT_STATUS_FREE_FALL) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X_AND_Y_AND_Z, - IIO_EV_TYPE_MAG, - IIO_EV_DIR_FALLING), - last_timestamp); - - if (val & SCA3000_INT_STATUS_Y_TRIGGER) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Y, - IIO_EV_TYPE_MAG, - IIO_EV_DIR_RISING), - last_timestamp); - - if (val & SCA3000_INT_STATUS_X_TRIGGER) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X, - IIO_EV_TYPE_MAG, - IIO_EV_DIR_RISING), - last_timestamp); - - if (val & SCA3000_INT_STATUS_Z_TRIGGER) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Z, - IIO_EV_TYPE_MAG, - IIO_EV_DIR_RISING), - last_timestamp); - -done: - return IRQ_HANDLED; -} - -/** - * sca3000_read_event_config() what events are enabled - **/ -static int sca3000_read_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret; - u8 protect_mask = 0x03; - int num = chan->channel2; - - /* read current value of mode register */ - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - - if ((st->rx[0] & protect_mask) != SCA3000_MEAS_MODE_MOT_DET) { - ret = 0; - } else { - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL); - if (ret < 0) - goto error_ret; - /* only supporting logical or's for now */ - ret = !!(ret & sca3000_addresses[num][2]); - } -error_ret: - mutex_unlock(&st->lock); - - return ret; -} - -/** - * sca3000_query_free_fall_mode() is free fall mode enabled - **/ -static ssize_t sca3000_query_free_fall_mode(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int ret; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - int val; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - val = st->rx[0]; - mutex_unlock(&st->lock); - if (ret < 0) - return ret; - return sprintf(buf, "%d\n", !!(val & SCA3000_FREE_FALL_DETECT)); -} - -/** - * sca3000_set_free_fall_mode() simple on off control for free fall int - * - * In these chips the free fall detector should send an interrupt if - * the device falls more than 25cm. This has not been tested due - * to fragile wiring. - **/ -static ssize_t sca3000_set_free_fall_mode(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct sca3000_state *st = iio_priv(indio_dev); - u8 val; - int ret; - u8 protect_mask = SCA3000_FREE_FALL_DETECT; - - mutex_lock(&st->lock); - ret = kstrtou8(buf, 10, &val); - if (ret) - goto error_ret; - - /* read current value of mode register */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - - /* if off and should be on */ - if (val && !(st->rx[0] & protect_mask)) - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] | SCA3000_FREE_FALL_DETECT)); - /* if on and should be off */ - else if (!val && (st->rx[0] & protect_mask)) - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] & ~protect_mask)); -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -/** - * sca3000_write_event_config() simple on off control for motion detector - * - * This is a per axis control, but enabling any will result in the - * motion detector unit being enabled. - * N.B. enabling motion detector stops normal data acquisition. - * There is a complexity in knowing which mode to return to when - * this mode is disabled. Currently normal mode is assumed. - **/ -static int sca3000_write_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - int state) -{ - struct sca3000_state *st = iio_priv(indio_dev); - int ret, ctrlval; - u8 protect_mask = 0x03; - int num = chan->channel2; - - mutex_lock(&st->lock); - /* - * First read the motion detector config to find out if - * this axis is on - */ - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL); - if (ret < 0) - goto exit_point; - ctrlval = ret; - /* if off and should be on */ - if (state && !(ctrlval & sca3000_addresses[num][2])) { - ret = sca3000_write_ctrl_reg(st, - SCA3000_REG_CTRL_SEL_MD_CTRL, - ctrlval | - sca3000_addresses[num][2]); - if (ret) - goto exit_point; - st->mo_det_use_count++; - } else if (!state && (ctrlval & sca3000_addresses[num][2])) { - ret = sca3000_write_ctrl_reg(st, - SCA3000_REG_CTRL_SEL_MD_CTRL, - ctrlval & - ~(sca3000_addresses[num][2])); - if (ret) - goto exit_point; - st->mo_det_use_count--; - } - - /* read current value of mode register */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto exit_point; - /* if off and should be on */ - if ((st->mo_det_use_count) && - ((st->rx[0] & protect_mask) != SCA3000_MEAS_MODE_MOT_DET)) - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] & ~protect_mask) - | SCA3000_MEAS_MODE_MOT_DET); - /* if on and should be off */ - else if (!(st->mo_det_use_count) && - ((st->rx[0] & protect_mask) == SCA3000_MEAS_MODE_MOT_DET)) - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] & ~protect_mask)); -exit_point: - mutex_unlock(&st->lock); - - return ret; -} - -/* Free fall detector related event attribute */ -static IIO_DEVICE_ATTR_NAMED(accel_xayaz_mag_falling_en, - in_accel_x & y & z_mag_falling_en, - S_IRUGO | S_IWUSR, - sca3000_query_free_fall_mode, - sca3000_set_free_fall_mode, - 0); - -static IIO_CONST_ATTR_NAMED(accel_xayaz_mag_falling_period, - in_accel_x & y & z_mag_falling_period, - "0.226"); - -static struct attribute *sca3000_event_attributes[] = { - &iio_dev_attr_accel_xayaz_mag_falling_en.dev_attr.attr, - &iio_const_attr_accel_xayaz_mag_falling_period.dev_attr.attr, - NULL, -}; - -static struct attribute_group sca3000_event_attribute_group = { - .attrs = sca3000_event_attributes, - .name = "events", -}; - -/** - * sca3000_clean_setup() get the device into a predictable state - * - * Devices use flash memory to store many of the register values - * and hence can come up in somewhat unpredictable states. - * Hence reset everything on driver load. - **/ -static int sca3000_clean_setup(struct sca3000_state *st) -{ - int ret; - - mutex_lock(&st->lock); - /* Ensure all interrupts have been acknowledged */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_STATUS, 1); - if (ret) - goto error_ret; - - /* Turn off all motion detection channels */ - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL); - if (ret < 0) - goto error_ret; - ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL, - ret & SCA3000_MD_CTRL_PROT_MASK); - if (ret) - goto error_ret; - - /* Disable ring buffer */ - ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); - if (ret < 0) - goto error_ret; - ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL, - (ret & SCA3000_OUT_CTRL_PROT_MASK) - | SCA3000_OUT_CTRL_BUF_X_EN - | SCA3000_OUT_CTRL_BUF_Y_EN - | SCA3000_OUT_CTRL_BUF_Z_EN - | SCA3000_OUT_CTRL_BUF_DIV_4); - if (ret) - goto error_ret; - /* Enable interrupts, relevant to mode and set up as active low */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_MASK, 1); - if (ret) - goto error_ret; - ret = sca3000_write_reg(st, - SCA3000_REG_ADDR_INT_MASK, - (ret & SCA3000_INT_MASK_PROT_MASK) - | SCA3000_INT_MASK_ACTIVE_LOW); - if (ret) - goto error_ret; - /* - * Select normal measurement mode, free fall off, ring off - * Ring in 12 bit mode - it is fine to overwrite reserved bits 3,5 - * as that occurs in one of the example on the datasheet - */ - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); - if (ret) - goto error_ret; - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, - (st->rx[0] & SCA3000_MODE_PROT_MASK)); - st->bpse = 11; - -error_ret: - mutex_unlock(&st->lock); - return ret; -} - -static const struct iio_info sca3000_info = { - .attrs = &sca3000_attribute_group, - .read_raw = &sca3000_read_raw, - .write_raw = &sca3000_write_raw, - .event_attrs = &sca3000_event_attribute_group, - .read_event_value = &sca3000_read_thresh, - .write_event_value = &sca3000_write_thresh, - .read_event_config = &sca3000_read_event_config, - .write_event_config = &sca3000_write_event_config, - .driver_module = THIS_MODULE, -}; - -static int sca3000_probe(struct spi_device *spi) -{ - int ret; - struct sca3000_state *st; - struct iio_dev *indio_dev; - - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - - st = iio_priv(indio_dev); - spi_set_drvdata(spi, indio_dev); - st->us = spi; - mutex_init(&st->lock); - st->info = &sca3000_spi_chip_info_tbl[spi_get_device_id(spi) - ->driver_data]; - - indio_dev->dev.parent = &spi->dev; - indio_dev->name = spi_get_device_id(spi)->name; - indio_dev->info = &sca3000_info; - if (st->info->temp_output) { - indio_dev->channels = sca3000_channels_with_temp; - indio_dev->num_channels = - ARRAY_SIZE(sca3000_channels_with_temp); - } else { - indio_dev->channels = sca3000_channels; - indio_dev->num_channels = ARRAY_SIZE(sca3000_channels); - } - indio_dev->modes = INDIO_DIRECT_MODE; - - sca3000_configure_ring(indio_dev); - ret = iio_device_register(indio_dev); - if (ret < 0) - return ret; - - if (spi->irq) { - ret = request_threaded_irq(spi->irq, - NULL, - &sca3000_event_handler, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "sca3000", - indio_dev); - if (ret) - goto error_unregister_dev; - } - sca3000_register_ring_funcs(indio_dev); - ret = sca3000_clean_setup(st); - if (ret) - goto error_free_irq; - return 0; - -error_free_irq: - if (spi->irq) - free_irq(spi->irq, indio_dev); -error_unregister_dev: - iio_device_unregister(indio_dev); - return ret; -} - -static int sca3000_stop_all_interrupts(struct sca3000_state *st) -{ - int ret; - - mutex_lock(&st->lock); - ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_INT_MASK, 1); - if (ret) - goto error_ret; - ret = sca3000_write_reg(st, SCA3000_REG_ADDR_INT_MASK, - (st->rx[0] & - ~(SCA3000_INT_MASK_RING_THREE_QUARTER | - SCA3000_INT_MASK_RING_HALF | - SCA3000_INT_MASK_ALL_INTS))); -error_ret: - mutex_unlock(&st->lock); - return ret; -} - -static int sca3000_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct sca3000_state *st = iio_priv(indio_dev); - - /* Must ensure no interrupts can be generated after this! */ - sca3000_stop_all_interrupts(st); - if (spi->irq) - free_irq(spi->irq, indio_dev); - iio_device_unregister(indio_dev); - sca3000_unconfigure_ring(indio_dev); - - return 0; -} - -static const struct spi_device_id sca3000_id[] = { - {"sca3000_d01", d01}, - {"sca3000_e02", e02}, - {"sca3000_e04", e04}, - {"sca3000_e05", e05}, - {} -}; -MODULE_DEVICE_TABLE(spi, sca3000_id); - -static struct spi_driver sca3000_driver = { - .driver = { - .name = "sca3000", - }, - .probe = sca3000_probe, - .remove = sca3000_remove, - .id_table = sca3000_id, -}; -module_spi_driver(sca3000_driver); - -MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); -MODULE_DESCRIPTION("VTI SCA3000 Series Accelerometers SPI driver"); -MODULE_LICENSE("GPL v2"); |