1 files changed, 0 insertions, 125 deletions
diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
deleted file mode 100644
index b483e4e..0000000
--- a/drivers/staging/iio/accel/adis16203.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef SPI_ADIS16203_H_
-#define SPI_ADIS16203_H_
-
-#define ADIS16203_STARTUP_DELAY	220 /* ms */
-
-/* Flash memory write count */
-#define ADIS16203_FLASH_CNT      0x00
-
-/* Output, power supply */
-#define ADIS16203_SUPPLY_OUT     0x02
-
-/* Output, auxiliary ADC input */
-#define ADIS16203_AUX_ADC        0x08
-
-/* Output, temperature */
-#define ADIS16203_TEMP_OUT       0x0A
-
-/* Output, x-axis inclination */
-#define ADIS16203_XINCL_OUT      0x0C
-
-/* Output, y-axis inclination */
-#define ADIS16203_YINCL_OUT      0x0E
-
-/* Incline null calibration */
-#define ADIS16203_INCL_NULL      0x18
-
-/* Alarm 1 amplitude threshold */
-#define ADIS16203_ALM_MAG1       0x20
-
-/* Alarm 2 amplitude threshold */
-#define ADIS16203_ALM_MAG2       0x22
-
-/* Alarm 1, sample period */
-#define ADIS16203_ALM_SMPL1      0x24
-
-/* Alarm 2, sample period */
-#define ADIS16203_ALM_SMPL2      0x26
-
-/* Alarm control */
-#define ADIS16203_ALM_CTRL       0x28
-
-/* Auxiliary DAC data */
-#define ADIS16203_AUX_DAC        0x30
-
-/* General-purpose digital input/output control */
-#define ADIS16203_GPIO_CTRL      0x32
-
-/* Miscellaneous control */
-#define ADIS16203_MSC_CTRL       0x34
-
-/* Internal sample period (rate) control */
-#define ADIS16203_SMPL_PRD       0x36
-
-/* Operation, filter configuration */
-#define ADIS16203_AVG_CNT        0x38
-
-/* Operation, sleep mode control */
-#define ADIS16203_SLP_CNT        0x3A
-
-/* Diagnostics, system status register */
-#define ADIS16203_DIAG_STAT      0x3C
-
-/* Operation, system command register */
-#define ADIS16203_GLOB_CMD       0x3E
-
-/* MSC_CTRL */
-
-/* Self-test at power-on: 1 = disabled, 0 = enabled */
-#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST	BIT(10)
-
-/* Reverses rotation of both inclination outputs */
-#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN	BIT(9)
-
-/* Self-test enable */
-#define ADIS16203_MSC_CTRL_SELF_TEST_EN	        BIT(8)
-
-/* Data-ready enable: 1 = enabled, 0 = disabled */
-#define ADIS16203_MSC_CTRL_DATA_RDY_EN	        BIT(2)
-
-/* Data-ready polarity: 1 = active high, 0 = active low */
-#define ADIS16203_MSC_CTRL_ACTIVE_HIGH	        BIT(1)
-
-/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
-#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1	BIT(0)
-
-/* DIAG_STAT */
-
-/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_ALARM2        BIT(9)
-
-/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_ALARM1        BIT(8)
-
-/* Self-test diagnostic error flag */
-#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
-
-/* SPI communications failure */
-#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT      3
-
-/* Flash update failure */
-#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT     2
-
-/* Power supply above 3.625 V */
-#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1
-
-/* Power supply below 3.15 V */
-#define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0
-
-/* GLOB_CMD */
-
-#define ADIS16203_GLOB_CMD_SW_RESET	BIT(7)
-#define ADIS16203_GLOB_CMD_CLEAR_STAT	BIT(4)
-#define ADIS16203_GLOB_CMD_FACTORY_CAL	BIT(1)
-
-#define ADIS16203_ERROR_ACTIVE          BIT(14)
-
-enum adis16203_scan {
-	ADIS16203_SCAN_INCLI_X,
-	ADIS16203_SCAN_INCLI_Y,
-	ADIS16203_SCAN_SUPPLY,
-	ADIS16203_SCAN_AUX_ADC,
-	ADIS16203_SCAN_TEMP,
-};
-
-#endif /* SPI_ADIS16203_H_ */