1 files changed, 0 insertions, 558 deletions

diff --git a/drivers/staging/gma500/mdfld_pyr_cmd.c b/drivers/staging/gma500/mdfld_pyr_cmd.c
deleted file mode 100644
index 523f2d8..0000000
--- a/drivers/staging/gma500/mdfld_pyr_cmd.c
+++ /dev/null
@@ -1,558 +0,0 @@
-/*
- * Copyright (c)  2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-#include "mdfld_dsi_dbi_dpu.h"
-#include "mdfld_dsi_pkg_sender.h"
-
-#include "displays/pyr_cmd.h"
-
-static struct drm_display_mode *pyr_cmd_get_config_mode(struct drm_device *dev)
-{
-	struct drm_display_mode *mode;
-
-	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
-	if (!mode) {
-		dev_err(dev->dev, "Out of memory\n");
-		return NULL;
-	}
-
-	dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
-	dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
-	dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
-	dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
-	dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
-	dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
-	dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
-	dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
-	dev_dbg(dev->dev, "clock is %d\n", mode->clock);
-
-	mode->hdisplay = 480;
-	mode->vdisplay = 864;
-	mode->hsync_start = 487;
-	mode->hsync_end = 490;
-	mode->htotal = 499;
-	mode->vsync_start = 874;
-	mode->vsync_end = 878;
-	mode->vtotal = 886;
-	mode->clock = 25777;
-
-	drm_mode_set_name(mode);
-	drm_mode_set_crtcinfo(mode, 0);
-
-	mode->type |= DRM_MODE_TYPE_PREFERRED;
-
-	return mode;
-}
-
-static bool pyr_dsi_dbi_mode_fixup(struct drm_encoder *encoder,
-				struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct drm_display_mode *fixed_mode = pyr_cmd_get_config_mode(dev);
-
-	if (fixed_mode) {
-		adjusted_mode->hdisplay = fixed_mode->hdisplay;
-		adjusted_mode->hsync_start = fixed_mode->hsync_start;
-		adjusted_mode->hsync_end = fixed_mode->hsync_end;
-		adjusted_mode->htotal = fixed_mode->htotal;
-		adjusted_mode->vdisplay = fixed_mode->vdisplay;
-		adjusted_mode->vsync_start = fixed_mode->vsync_start;
-		adjusted_mode->vsync_end = fixed_mode->vsync_end;
-		adjusted_mode->vtotal = fixed_mode->vtotal;
-		adjusted_mode->clock = fixed_mode->clock;
-		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
-		kfree(fixed_mode);
-	}
-	return true;
-}
-
-static void pyr_dsi_dbi_set_power(struct drm_encoder *encoder, bool on)
-{
-	int ret = 0;
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dbi_output =
-				MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-	struct drm_device *dev = encoder->dev;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	u32 reg_offset = 0;
-	int pipe = (dbi_output->channel_num == 0) ? 0 : 2;
-
-	dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n", pipe,
-			on ? "On" : "Off",
-			dbi_output->dbi_panel_on ? "True" : "False");
-
-	if (pipe == 2) {
-		if (on)
-			dev_priv->dual_mipi = true;
-		else
-			dev_priv->dual_mipi = false;
-
-		reg_offset = MIPIC_REG_OFFSET;
-	} else {
-		if (!on)
-			dev_priv->dual_mipi = false;
-	}
-
-	if (!gma_power_begin(dev, true)) {
-		dev_err(dev->dev, "hw begin failed\n");
-		return;
-	}
-
-
-	if (on) {
-		if (dbi_output->dbi_panel_on)
-			goto out_err;
-
-		ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_ON);
-		if (ret) {
-			dev_err(dev->dev, "power on error\n");
-			goto out_err;
-		}
-
-		dbi_output->dbi_panel_on = true;
-
-		if (pipe == 2) {
-			dev_priv->dbi_panel_on2 = true;
-		} else {
-			dev_priv->dbi_panel_on = true;
-			mdfld_enable_te(dev, 0);
-		}
-	} else {
-		if (!dbi_output->dbi_panel_on && !dbi_output->first_boot)
-			goto out_err;
-
-		dbi_output->dbi_panel_on = false;
-		dbi_output->first_boot = false;
-
-		if (pipe == 2) {
-			dev_priv->dbi_panel_on2 = false;
-			mdfld_disable_te(dev, 2);
-		} else {
-			dev_priv->dbi_panel_on = false;
-			mdfld_disable_te(dev, 0);
-
-			if (dev_priv->dbi_panel_on2)
-				mdfld_enable_te(dev, 2);
-		}
-
-		ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_OFF);
-		if (ret) {
-			dev_err(dev->dev, "power on error\n");
-			goto out_err;
-		}
-	}
-
-out_err:
-	gma_power_end(dev);
-
-	if (ret)
-		dev_err(dev->dev, "failed\n");
-}
-
-static void pyr_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
-								int pipe)
-{
-	struct drm_device *dev = dsi_config->dev;
-	u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
-	int lane_count = dsi_config->lane_count;
-	u32 val = 0;
-
-	dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe);
-
-	/* Un-ready device */
-	REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
-
-	/* Init dsi adapter before kicking off */
-	REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
-
-	/* TODO: figure out how to setup these registers */
-	REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c600F);
-	REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset),
-								0x000a0014);
-	REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400);
-	REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000);
-
-	/* Enable all interrupts */
-	REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
-	/* Max value: 20 clock cycles of txclkesc */
-	REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f);
-	/* Min 21 txclkesc, max: ffffh */
-	REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff);
-	/* Min: 7d0 max: 4e20 */
-	REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0);
-
-	/* Set up func_prg */
-	val |= lane_count;
-	val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET);
-	val |= DSI_DBI_COLOR_FORMAT_OPTION2;
-	REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val);
-
-	REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff);
-	REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff);
-
-	/* De-assert dbi_stall when half of DBI FIFO is empty */
-	/* REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000000); */
-
-	REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
-	REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000002);
-	REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004);
-	REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001);
-}
-
-static void pyr_dsi_dbi_mode_set(struct drm_encoder *encoder,
-				struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode)
-{
-	int ret = 0;
-	struct drm_device *dev = encoder->dev;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dsi_output =
-					MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-	struct mdfld_dsi_config *dsi_config =
-				mdfld_dsi_encoder_get_config(dsi_encoder);
-	struct mdfld_dsi_connector *dsi_connector = dsi_config->connector;
-	int pipe = dsi_connector->pipe;
-	u8 param = 0;
-
-	/* Regs */
-	u32 mipi_reg = MIPI;
-	u32 dspcntr_reg = DSPACNTR;
-	u32 pipeconf_reg = PIPEACONF;
-	u32 reg_offset = 0;
-
-	/* Values */
-	u32 dspcntr_val = dev_priv->dspcntr;
-	u32 pipeconf_val = dev_priv->pipeconf;
-	u32 h_active_area = mode->hdisplay;
-	u32 v_active_area = mode->vdisplay;
-	u32 mipi_val = (PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX |
-							TE_TRIGGER_GPIO_PIN);
-
-	dev_dbg(dev->dev, "mipi_val =0x%x\n", mipi_val);
-
-	dev_dbg(dev->dev, "type %s\n", (pipe == 2) ? "MIPI2" : "MIPI");
-	dev_dbg(dev->dev, "h %d v %d\n", mode->hdisplay, mode->vdisplay);
-
-	if (pipe == 2) {
-		mipi_reg = MIPI_C;
-		dspcntr_reg = DSPCCNTR;
-		pipeconf_reg = PIPECCONF;
-
-		reg_offset = MIPIC_REG_OFFSET;
-
-		dspcntr_val = dev_priv->dspcntr2;
-		pipeconf_val = dev_priv->pipeconf2;
-	} else {
-		mipi_val |= 0x2; /* Two lanes for port A and C respectively */
-	}
-
-	if (!gma_power_begin(dev, true)) {
-		dev_err(dev->dev, "hw begin failed\n");
-		return;
-	}
-
-	/* Set up pipe related registers */
-	REG_WRITE(mipi_reg, mipi_val);
-	REG_READ(mipi_reg);
-
-	pyr_dsi_controller_dbi_init(dsi_config, pipe);
-
-	msleep(20);
-
-	REG_WRITE(dspcntr_reg, dspcntr_val);
-	REG_READ(dspcntr_reg);
-
-	/* 20ms delay before sending exit_sleep_mode */
-	msleep(20);
-
-	/* Send exit_sleep_mode DCS */
-	ret = mdfld_dsi_dbi_send_dcs(dsi_output, exit_sleep_mode, NULL,
-						0, CMD_DATA_SRC_SYSTEM_MEM);
-	if (ret) {
-		dev_err(dev->dev, "sent exit_sleep_mode faild\n");
-		goto out_err;
-	}
-
-	/*send set_tear_on DCS*/
-	ret = mdfld_dsi_dbi_send_dcs(dsi_output, set_tear_on,
-					&param, 1, CMD_DATA_SRC_SYSTEM_MEM);
-	if (ret) {
-		dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__);
-		goto out_err;
-	}
-
-	/* Do some init stuff */
-	mdfld_dsi_brightness_init(dsi_config, pipe);
-	mdfld_dsi_gen_fifo_ready(dev, (MIPIA_GEN_FIFO_STAT_REG + reg_offset),
-				HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
-
-	REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR);
-	REG_READ(pipeconf_reg);
-
-	/* TODO: this looks ugly, try to move it to CRTC mode setting */
-	if (pipe == 2)
-		dev_priv->pipeconf2 |= PIPEACONF_DSR;
-	else
-		dev_priv->pipeconf |= PIPEACONF_DSR;
-
-	dev_dbg(dev->dev, "pipeconf %x\n",  REG_READ(pipeconf_reg));
-
-	ret = mdfld_dsi_dbi_update_area(dsi_output, 0, 0,
-				h_active_area - 1, v_active_area - 1);
-	if (ret) {
-		dev_err(dev->dev, "update area failed\n");
-		goto out_err;
-	}
-
-out_err:
-	gma_power_end(dev);
-
-	if (ret)
-		dev_err(dev->dev, "mode set failed\n");
-	else
-		dev_dbg(dev->dev, "mode set done successfully\n");
-}
-
-static void pyr_dsi_dbi_prepare(struct drm_encoder *encoder)
-{
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dbi_output =
-					MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-
-	dbi_output->mode_flags |= MODE_SETTING_IN_ENCODER;
-	dbi_output->mode_flags &= ~MODE_SETTING_ENCODER_DONE;
-
-	pyr_dsi_dbi_set_power(encoder, false);
-}
-
-static void pyr_dsi_dbi_commit(struct drm_encoder *encoder)
-{
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dbi_output =
-					MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-	struct drm_device *dev = dbi_output->dev;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	struct psb_drm_dpu_rect rect;
-
-	pyr_dsi_dbi_set_power(encoder, true);
-
-	dbi_output->mode_flags &= ~MODE_SETTING_IN_ENCODER;
-
-	rect.x = rect.y = 0;
-	rect.width = 864;
-	rect.height = 480;
-
-	if (dbi_output->channel_num == 1) {
-		dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_2;
-		/* If DPU enabled report a fullscreen damage */
-		mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, &rect);
-	} else {
-		dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_0;
-		mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, &rect);
-	}
-	dbi_output->mode_flags |= MODE_SETTING_ENCODER_DONE;
-}
-
-static void pyr_dsi_dbi_dpms(struct drm_encoder *encoder, int mode)
-{
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dbi_output =
-					MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-	struct drm_device *dev = dbi_output->dev;
-
-	dev_dbg(dev->dev, "%s\n",  (mode == DRM_MODE_DPMS_ON ? "on" : "off"));
-
-	if (mode == DRM_MODE_DPMS_ON)
-		pyr_dsi_dbi_set_power(encoder, true);
-	else
-		pyr_dsi_dbi_set_power(encoder, false);
-}
-
-/*
- * Update the DBI MIPI Panel Frame Buffer.
- */
-static void pyr_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output,
-								int pipe)
-{
-	struct mdfld_dsi_pkg_sender *sender =
-		mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base);
-	struct drm_device *dev = dbi_output->dev;
-	struct drm_crtc *crtc = dbi_output->base.base.crtc;
-	struct psb_intel_crtc *psb_crtc = (crtc) ?
-				to_psb_intel_crtc(crtc) : NULL;
-
-	u32 dpll_reg = MRST_DPLL_A;
-	u32 dspcntr_reg = DSPACNTR;
-	u32 pipeconf_reg = PIPEACONF;
-	u32 dsplinoff_reg = DSPALINOFF;
-	u32 dspsurf_reg = DSPASURF;
-	u32 hs_gen_ctrl_reg = HS_GEN_CTRL_REG;
-	u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG;
-	u32 reg_offset = 0;
-
-	u32 intr_status;
-	u32 fifo_stat_reg_val;
-	u32 dpll_reg_val;
-	u32 dspcntr_reg_val;
-	u32 pipeconf_reg_val;
-
-	/* If mode setting on-going, back off */
-	if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) ||
-		(psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING) ||
-		!(dbi_output->mode_flags & MODE_SETTING_ENCODER_DONE))
-		return;
-
-	/*
-	 * Look for errors here.  In particular we're checking for whatever
-	 * error status might have appeared during the last frame transmit
-	 * (memory write).
-	 *
-	 * Normally, the bits we're testing here would be set infrequently,
-	 * if at all.  However, one panel (at least) returns at least one
-	 * error bit on most frames.  So we've disabled the kernel message
-	 * for now.
-	 *
-	 * Still clear whatever error bits are set, except don't clear the
-	 * ones that would make the Penwell DSI controller reset if we
-	 * cleared them.
-	 */
-	intr_status = REG_READ(INTR_STAT_REG);
-	if ((intr_status & 0x26FFFFFF) != 0) {
-		/* dev_err(dev->dev, "DSI status: 0x%08X\n", intr_status); */
-		intr_status &= 0x26F3FFFF;
-		REG_WRITE(INTR_STAT_REG, intr_status);
-	}
-
-	if (pipe == 2) {
-		dspcntr_reg = DSPCCNTR;
-		pipeconf_reg = PIPECCONF;
-		dsplinoff_reg = DSPCLINOFF;
-		dspsurf_reg = DSPCSURF;
-
-		hs_gen_ctrl_reg = HS_GEN_CTRL_REG + MIPIC_REG_OFFSET;
-		gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET,
-
-		reg_offset = MIPIC_REG_OFFSET;
-	}
-
-	if (!gma_power_begin(dev, true)) {
-		dev_err(dev->dev, "hw begin failed\n");
-		return;
-	}
-
-	fifo_stat_reg_val = REG_READ(MIPIA_GEN_FIFO_STAT_REG + reg_offset);
-	dpll_reg_val = REG_READ(dpll_reg);
-	dspcntr_reg_val = REG_READ(dspcntr_reg);
-	pipeconf_reg_val = REG_READ(pipeconf_reg);
-
-	if (!(fifo_stat_reg_val & (1 << 27)) ||
-		(dpll_reg_val & DPLL_VCO_ENABLE) ||
-		!(dspcntr_reg_val & DISPLAY_PLANE_ENABLE) ||
-		!(pipeconf_reg_val & DISPLAY_PLANE_ENABLE)) {
-		goto update_fb_out0;
-	}
-
-	/* Refresh plane changes */
-	REG_WRITE(dsplinoff_reg, REG_READ(dsplinoff_reg));
-	REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg));
-	REG_READ(dspsurf_reg);
-
-	mdfld_dsi_send_dcs(sender,
-			   write_mem_start,
-			   NULL,
-			   0,
-			   CMD_DATA_SRC_PIPE,
-			   MDFLD_DSI_SEND_PACKAGE);
-
-	/*
-	 * The idea here is to transmit a Generic Read command after the
-	 * Write Memory Start/Continue commands finish.  This asks for
-	 * the panel to return an "ACK No Errors," or (if it has errors
-	 * to report) an Error Report.  This allows us to monitor the
-	 * panel's perception of the health of the DSI.
-	 */
-	mdfld_dsi_gen_fifo_ready(dev, gen_fifo_stat_reg,
-				HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
-	REG_WRITE(hs_gen_ctrl_reg, (1 << WORD_COUNTS_POS) | GEN_READ_0);
-
-	dbi_output->dsr_fb_update_done = true;
-update_fb_out0:
-	gma_power_end(dev);
-}
-
-/*
- * TODO: will be removed later, should work out display interfaces for power
- */
-void pyr_dsi_adapter_init(struct mdfld_dsi_config *dsi_config, int pipe)
-{
-	if (!dsi_config || (pipe != 0 && pipe != 2)) {
-		WARN_ON(1);
-		return;
-	}
-	pyr_dsi_controller_dbi_init(dsi_config, pipe);
-}
-
-static int pyr_cmd_get_panel_info(struct drm_device *dev, int pipe,
-							struct panel_info *pi)
-{
-	if (!dev || !pi)
-		return -EINVAL;
-
-	pi->width_mm = PYR_PANEL_WIDTH;
-	pi->height_mm = PYR_PANEL_HEIGHT;
-
-	return 0;
-}
-
-/* PYR DBI encoder helper funcs */
-static const struct drm_encoder_helper_funcs pyr_dsi_dbi_helper_funcs = {
-	.dpms = pyr_dsi_dbi_dpms,
-	.mode_fixup = pyr_dsi_dbi_mode_fixup,
-	.prepare = pyr_dsi_dbi_prepare,
-	.mode_set = pyr_dsi_dbi_mode_set,
-	.commit = pyr_dsi_dbi_commit,
-};
-
-/* PYR DBI encoder funcs */
-static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
-void pyr_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs)
-{
-	p_funcs->encoder_funcs = &mdfld_dsi_dbi_encoder_funcs;
-	p_funcs->encoder_helper_funcs = &pyr_dsi_dbi_helper_funcs;
-	p_funcs->get_config_mode = &pyr_cmd_get_config_mode;
-	p_funcs->update_fb = pyr_dsi_dbi_update_fb;
-	p_funcs->get_panel_info = pyr_cmd_get_panel_info;
-}