diff options
Diffstat (limited to 'drivers/staging/comedi')
28 files changed, 26 insertions, 3 deletions
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c index 10f488f..2d54993 100644 --- a/drivers/staging/comedi/drivers/8255.c +++ b/drivers/staging/comedi/drivers/8255.c @@ -81,6 +81,7 @@ I/O port base address can be found in the output of 'lspci -v'. #include "../comedidev.h" #include <linux/ioport.h> +#include <linux/slab.h> #define _8255_SIZE 4 diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c index 8db5ab6..6625fdc 100644 --- a/drivers/staging/comedi/drivers/addi-data/addi_common.c +++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c @@ -50,7 +50,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour #include <linux/module.h> #include <linux/sched.h> #include <linux/mm.h> -#include <linux/slab.h> #include <linux/errno.h> #include <linux/ioport.h> #include <linux/delay.h> @@ -58,6 +57,7 @@ You should also find the complete GPL in the COPYING file accompanying this sour #include <linux/timex.h> #include <linux/timer.h> #include <linux/pci.h> +#include <linux/gfp.h> #include "../../comedidev.h" #include <asm/io.h> #if defined(CONFIG_APCI_1710) || defined(CONFIG_APCI_3200) || defined(CONFIG_APCI_3300) diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c index 9934a3c..944f20a 100644 --- a/drivers/staging/comedi/drivers/adl_pci9118.c +++ b/drivers/staging/comedi/drivers/adl_pci9118.c @@ -66,6 +66,7 @@ Configuration options: #include "../pci_ids.h" #include <linux/delay.h> +#include <linux/gfp.h> #include <linux/interrupt.h> #include "amcc_s5933.h" diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c index 204f30e..92bcc205 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200.c +++ b/drivers/staging/comedi/drivers/amplc_dio200.c @@ -206,6 +206,7 @@ order they appear in the channel list. */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c index b41e5e59..c54cca8 100644 --- a/drivers/staging/comedi/drivers/amplc_pci224.c +++ b/drivers/staging/comedi/drivers/amplc_pci224.c @@ -104,6 +104,7 @@ Caveats: */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index bc375e7..5632991 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -32,6 +32,7 @@ Status: experimental */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include <linux/delay.h> #include <linux/pci.h> diff --git a/drivers/staging/comedi/drivers/comedi_bond.c b/drivers/staging/comedi/drivers/comedi_bond.c index d7260cc..41311d9 100644 --- a/drivers/staging/comedi/drivers/comedi_bond.c +++ b/drivers/staging/comedi/drivers/comedi_bond.c @@ -90,6 +90,7 @@ Configuration Options: #include "../comedilib.h" #include "../comedidev.h" #include <linux/string.h> +#include <linux/slab.h> /* The maxiumum number of channels per subdevice. */ #define MAX_CHANS 256 diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index f12ef1c..9164ce15 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -43,6 +43,7 @@ Command support does not exist, but could be added for this board. #include <linux/delay.h> #include <linux/pci.h> +#include <linux/slab.h> #include "das08.h" diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c index 10a87e6..f2aadda 100644 --- a/drivers/staging/comedi/drivers/das16.c +++ b/drivers/staging/comedi/drivers/das16.c @@ -79,6 +79,7 @@ Computer boards manuals also available from their website www.measurementcomputi */ #include <linux/pci.h> +#include <linux/slab.h> #include <linux/interrupt.h> #include <asm/dma.h> #include "../comedidev.h" diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c index 6ea59cc..3c3e045 100644 --- a/drivers/staging/comedi/drivers/das1800.c +++ b/drivers/staging/comedi/drivers/das1800.c @@ -101,6 +101,7 @@ TODO: */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include <linux/ioport.h> diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c index 99ca294..e548763 100644 --- a/drivers/staging/comedi/drivers/dt282x.c +++ b/drivers/staging/comedi/drivers/dt282x.c @@ -58,6 +58,7 @@ Notes: #include "../comedidev.h" +#include <linux/gfp.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <asm/dma.h> diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index fe5b4953..d330b18 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -46,6 +46,7 @@ Devices: [JR3] PCI force sensor board (jr3_pci) #include <linux/ctype.h> #include <linux/firmware.h> #include <linux/jiffies.h> +#include <linux/slab.h> #include <linux/timer.h> #include "comedi_pci.h" #include "jr3_pci.h" diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c index c223f76..9a4fffe 100644 --- a/drivers/staging/comedi/drivers/ni_65xx.c +++ b/drivers/staging/comedi/drivers/ni_65xx.c @@ -52,6 +52,7 @@ except maybe the 6514. #define DEBUG 1 #define DEBUG_FLAGS #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include "mite.h" diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c index 1e792d5..68221bf 100644 --- a/drivers/staging/comedi/drivers/ni_670x.c +++ b/drivers/staging/comedi/drivers/ni_670x.c @@ -42,6 +42,7 @@ Commands are not supported. */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include "mite.h" diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c index dd75dfb..9bff34c 100644 --- a/drivers/staging/comedi/drivers/ni_at_a2150.c +++ b/drivers/staging/comedi/drivers/ni_at_a2150.c @@ -65,6 +65,7 @@ TRIG_WAKE_EOS */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include <linux/ioport.h> diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index c9b0395..7ea6453 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -42,6 +42,7 @@ IRQ is assigned but not used. */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include <linux/ioport.h> diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 9017be3..ddc312b 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -41,6 +41,7 @@ the PCMCIA interface. #undef LABPC_DEBUG #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include <linux/ioport.h> diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 3c88caa..558e525 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -77,6 +77,7 @@ NI manuals: /* #define LABPC_DEBUG enable debugging messages */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include <linux/delay.h> diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 0b963bb..8ad1055 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -64,6 +64,7 @@ NI manuals: #include "../comedidev.h" #include <linux/delay.h> +#include <linux/slab.h> #include "8253.h" #include "8255.h" diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c index d4634c4..1ddc19c 100644 --- a/drivers/staging/comedi/drivers/pcl812.c +++ b/drivers/staging/comedi/drivers/pcl812.c @@ -108,6 +108,7 @@ Options for ACL-8113, ISO-813: */ #include <linux/interrupt.h> +#include <linux/gfp.h> #include "../comedidev.h" #include <linux/delay.h> diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c index 9820759..71c2a3a 100644 --- a/drivers/staging/comedi/drivers/pcl816.c +++ b/drivers/staging/comedi/drivers/pcl816.c @@ -36,6 +36,7 @@ Configuration Options: #include <linux/ioport.h> #include <linux/mc146818rtc.h> +#include <linux/gfp.h> #include <linux/delay.h> #include <asm/dma.h> diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c index c9d7538..9d6aa39 100644 --- a/drivers/staging/comedi/drivers/pcl818.c +++ b/drivers/staging/comedi/drivers/pcl818.c @@ -102,6 +102,7 @@ A word or two about DMA. Driver support DMA operations at two ways: #include <linux/ioport.h> #include <linux/mc146818rtc.h> +#include <linux/gfp.h> #include <linux/delay.h> #include <asm/dma.h> diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c index 6ca4105..025a52e 100644 --- a/drivers/staging/comedi/drivers/pcmmio.c +++ b/drivers/staging/comedi/drivers/pcmmio.c @@ -77,6 +77,7 @@ Configuration Options: */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include "pcm_common.h" #include <linux/pci.h> /* for PCI devices */ diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c index c1ae20f..5af4c84 100644 --- a/drivers/staging/comedi/drivers/pcmuio.c +++ b/drivers/staging/comedi/drivers/pcmuio.c @@ -76,6 +76,7 @@ Configuration Options: */ #include <linux/interrupt.h> +#include <linux/slab.h> #include "../comedidev.h" #include "pcm_common.h" diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c index dd2b903..0792617 100644 --- a/drivers/staging/comedi/drivers/serial2002.c +++ b/drivers/staging/comedi/drivers/serial2002.c @@ -36,6 +36,7 @@ Status: in development #include <linux/delay.h> #include <linux/ioport.h> #include <linux/sched.h> +#include <linux/slab.h> #include <asm/termios.h> #include <asm/ioctls.h> diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c index 75a9a62..be1d83d 100644 --- a/drivers/staging/comedi/drivers/unioxx5.c +++ b/drivers/staging/comedi/drivers/unioxx5.c @@ -44,6 +44,7 @@ Devices: [Fastwel] UNIOxx-5 (unioxx5), #include "../comedidev.h" #include <linux/ioport.h> +#include <linux/slab.h> #define DRIVER_NAME "unioxx5" #define UNIOXX5_SIZE 0x10 diff --git a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c index 6552ef6..288fef4 100644 --- a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c +++ b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c @@ -31,7 +31,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/mm.h> -#include <linux/slab.h> #include <asm/io.h> #include "../comedi.h" diff --git a/drivers/staging/comedi/kcomedilib/ksyms.c b/drivers/staging/comedi/kcomedilib/ksyms.c index 19293d1..8bf4471 100644 --- a/drivers/staging/comedi/kcomedilib/ksyms.c +++ b/drivers/staging/comedi/kcomedilib/ksyms.c @@ -34,7 +34,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/mm.h> -#include <linux/slab.h> /* functions specific to kcomedilib */ |