diff options
Diffstat (limited to 'drivers/staging/brcm80211/sys/wlc_ampdu.c')
| -rw-r--r-- | drivers/staging/brcm80211/sys/wlc_ampdu.c | 1411 |
1 files changed, 1411 insertions, 0 deletions
diff --git a/drivers/staging/brcm80211/sys/wlc_ampdu.c b/drivers/staging/brcm80211/sys/wlc_ampdu.c new file mode 100644 index 0000000..a4e49f3 --- /dev/null +++ b/drivers/staging/brcm80211/sys/wlc_ampdu.c @@ -0,0 +1,1411 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#include <linux/kernel.h> +#include <wlc_cfg.h> +#include <bcmdefs.h> +#include <linuxver.h> +#include <bcmdefs.h> +#include <osl.h> +#include <bcmutils.h> +#include <siutils.h> +#include <bcmendian.h> +#include <wlioctl.h> +#include <sbhnddma.h> +#include <hnddma.h> +#include <d11.h> +#include <wlc_rate.h> +#include <wlc_pub.h> +#include <wlc_key.h> +#include <wlc_mac80211.h> +#include <wlc_phy_hal.h> +#include <wlc_antsel.h> +#include <wlc_scb.h> +#include <net/mac80211.h> +#include <wlc_ampdu.h> +#include <wl_export.h> + +#ifdef WLC_HIGH_ONLY +#include <bcm_rpc_tp.h> +#include <wlc_rpctx.h> +#endif + +#define AMPDU_MAX_MPDU 32 /* max number of mpdus in an ampdu */ +#define AMPDU_NUM_MPDU_LEGACY 16 /* max number of mpdus in an ampdu to a legacy */ +#define AMPDU_TX_BA_MAX_WSIZE 64 /* max Tx ba window size (in pdu) */ +#define AMPDU_TX_BA_DEF_WSIZE 64 /* default Tx ba window size (in pdu) */ +#define AMPDU_RX_BA_DEF_WSIZE 64 /* max Rx ba window size (in pdu) */ +#define AMPDU_RX_BA_MAX_WSIZE 64 /* default Rx ba window size (in pdu) */ +#define AMPDU_MAX_DUR 5 /* max dur of tx ampdu (in msec) */ +#define AMPDU_DEF_RETRY_LIMIT 5 /* default tx retry limit */ +#define AMPDU_DEF_RR_RETRY_LIMIT 2 /* default tx retry limit at reg rate */ +#define AMPDU_DEF_TXPKT_WEIGHT 2 /* default weight of ampdu in txfifo */ +#define AMPDU_DEF_FFPLD_RSVD 2048 /* default ffpld reserved bytes */ +#define AMPDU_INI_FREE 10 /* # of inis to be freed on detach */ +#define AMPDU_SCB_MAX_RELEASE 20 /* max # of mpdus released at a time */ + +#define NUM_FFPLD_FIFO 4 /* number of fifo concerned by pre-loading */ +#define FFPLD_TX_MAX_UNFL 200 /* default value of the average number of ampdu + * without underflows + */ +#define FFPLD_MPDU_SIZE 1800 /* estimate of maximum mpdu size */ +#define FFPLD_MAX_MCS 23 /* we don't deal with mcs 32 */ +#define FFPLD_PLD_INCR 1000 /* increments in bytes */ +#define FFPLD_MAX_AMPDU_CNT 5000 /* maximum number of ampdu we + * accumulate between resets. + */ + +#define TX_SEQ_TO_INDEX(seq) ((seq) % AMPDU_TX_BA_MAX_WSIZE) + +/* max possible overhead per mpdu in the ampdu; 3 is for roundup if needed */ +#define AMPDU_MAX_MPDU_OVERHEAD (DOT11_FCS_LEN + DOT11_ICV_AES_LEN + AMPDU_DELIMITER_LEN + 3 \ + + DOT11_A4_HDR_LEN + DOT11_QOS_LEN + DOT11_IV_MAX_LEN) + +#ifdef BCMDBG +u32 wl_ampdu_dbg = + WL_AMPDU_UPDN_VAL | + WL_AMPDU_ERR_VAL | + WL_AMPDU_TX_VAL | + WL_AMPDU_RX_VAL | + WL_AMPDU_CTL_VAL | + WL_AMPDU_HW_VAL | WL_AMPDU_HWTXS_VAL | WL_AMPDU_HWDBG_VAL; +#endif + +/* structure to hold tx fifo information and pre-loading state + * counters specific to tx underflows of ampdus + * some counters might be redundant with the ones in wlc or ampdu structures. + * This allows to maintain a specific state independantly of + * how often and/or when the wlc counters are updated. + */ +typedef struct wlc_fifo_info { + u16 ampdu_pld_size; /* number of bytes to be pre-loaded */ + u8 mcs2ampdu_table[FFPLD_MAX_MCS + 1]; /* per-mcs max # of mpdus in an ampdu */ + u16 prev_txfunfl; /* num of underflows last read from the HW macstats counter */ + u32 accum_txfunfl; /* num of underflows since we modified pld params */ + u32 accum_txampdu; /* num of tx ampdu since we modified pld params */ + u32 prev_txampdu; /* previous reading of tx ampdu */ + u32 dmaxferrate; /* estimated dma avg xfer rate in kbits/sec */ +} wlc_fifo_info_t; + +/* AMPDU module specific state */ +struct ampdu_info { + wlc_info_t *wlc; /* pointer to main wlc structure */ + int scb_handle; /* scb cubby handle to retrieve data from scb */ + u8 ini_enable[AMPDU_MAX_SCB_TID]; /* per-tid initiator enable/disable of ampdu */ + u8 ba_tx_wsize; /* Tx ba window size (in pdu) */ + u8 ba_rx_wsize; /* Rx ba window size (in pdu) */ + u8 retry_limit; /* mpdu transmit retry limit */ + u8 rr_retry_limit; /* mpdu transmit retry limit at regular rate */ + u8 retry_limit_tid[AMPDU_MAX_SCB_TID]; /* per-tid mpdu transmit retry limit */ + /* per-tid mpdu transmit retry limit at regular rate */ + u8 rr_retry_limit_tid[AMPDU_MAX_SCB_TID]; + u8 mpdu_density; /* min mpdu spacing (0-7) ==> 2^(x-1)/8 usec */ + s8 max_pdu; /* max pdus allowed in ampdu */ + u8 dur; /* max duration of an ampdu (in msec) */ + u8 txpkt_weight; /* weight of ampdu in txfifo; reduces rate lag */ + u8 rx_factor; /* maximum rx ampdu factor (0-3) ==> 2^(13+x) bytes */ + u32 ffpld_rsvd; /* number of bytes to reserve for preload */ + u32 max_txlen[MCS_TABLE_SIZE][2][2]; /* max size of ampdu per mcs, bw and sgi */ + void *ini_free[AMPDU_INI_FREE]; /* array of ini's to be freed on detach */ + bool mfbr; /* enable multiple fallback rate */ + u32 tx_max_funl; /* underflows should be kept such that + * (tx_max_funfl*underflows) < tx frames + */ + wlc_fifo_info_t fifo_tb[NUM_FFPLD_FIFO]; /* table of fifo infos */ + +#ifdef WLC_HIGH_ONLY + void *p; + tx_status_t txs; + bool waiting_status; /* To help sanity checks */ +#endif +}; + +#define AMPDU_CLEANUPFLAG_RX (0x1) +#define AMPDU_CLEANUPFLAG_TX (0x2) + +#define SCB_AMPDU_CUBBY(ampdu, scb) (&(scb->scb_ampdu)) +#define SCB_AMPDU_INI(scb_ampdu, tid) (&(scb_ampdu->ini[tid])) + +static void wlc_ffpld_init(ampdu_info_t *ampdu); +static int wlc_ffpld_check_txfunfl(wlc_info_t *wlc, int f); +static void wlc_ffpld_calc_mcs2ampdu_table(ampdu_info_t *ampdu, int f); + +static scb_ampdu_tid_ini_t *wlc_ampdu_init_tid_ini(ampdu_info_t *ampdu, + scb_ampdu_t *scb_ampdu, + u8 tid, bool override); +static void ampdu_cleanup_tid_ini(ampdu_info_t *ampdu, scb_ampdu_t *scb_ampdu, + u8 tid, bool force); +static void ampdu_update_max_txlen(ampdu_info_t *ampdu, u8 dur); +static void scb_ampdu_update_config(ampdu_info_t *ampdu, struct scb *scb); +static void scb_ampdu_update_config_all(ampdu_info_t *ampdu); + +#define wlc_ampdu_txflowcontrol(a, b, c) do {} while (0) + +static void wlc_ampdu_dotxstatus_complete(ampdu_info_t *ampdu, struct scb *scb, + void *p, tx_status_t *txs, + u32 frmtxstatus, + u32 frmtxstatus2); + +static inline u16 pkt_txh_seqnum(wlc_info_t *wlc, void *p) +{ + d11txh_t *txh; + struct dot11_header *h; + txh = (d11txh_t *) PKTDATA(p); + h = (struct dot11_header *)((u8 *) (txh + 1) + D11_PHY_HDR_LEN); + return ltoh16(h->seq) >> SEQNUM_SHIFT; +} + +ampdu_info_t *wlc_ampdu_attach(wlc_info_t *wlc) +{ + ampdu_info_t *ampdu; + int i; + + /* some code depends on packed structures */ + ASSERT(DOT11_MAXNUMFRAGS == NBITS(u16)); + ASSERT(ISPOWEROF2(AMPDU_TX_BA_MAX_WSIZE)); + ASSERT(ISPOWEROF2(AMPDU_RX_BA_MAX_WSIZE)); + ASSERT(wlc->pub->tunables->ampdunummpdu <= AMPDU_MAX_MPDU); + ASSERT(wlc->pub->tunables->ampdunummpdu > 0); + + ampdu = kzalloc(sizeof(ampdu_info_t), GFP_ATOMIC); + if (!ampdu) { + WL_ERROR(("wl%d: wlc_ampdu_attach: out of mem\n", wlc->pub->unit)); + return NULL; + } + ampdu->wlc = wlc; + + for (i = 0; i < AMPDU_MAX_SCB_TID; i++) + ampdu->ini_enable[i] = true; + /* Disable ampdu for VO by default */ + ampdu->ini_enable[PRIO_8021D_VO] = false; + ampdu->ini_enable[PRIO_8021D_NC] = false; + + /* Disable ampdu for BK by default since not enough fifo space */ + ampdu->ini_enable[PRIO_8021D_NONE] = false; + ampdu->ini_enable[PRIO_8021D_BK] = false; + + ampdu->ba_tx_wsize = AMPDU_TX_BA_DEF_WSIZE; + ampdu->ba_rx_wsize = AMPDU_RX_BA_DEF_WSIZE; + ampdu->mpdu_density = AMPDU_DEF_MPDU_DENSITY; + ampdu->max_pdu = AUTO; + ampdu->dur = AMPDU_MAX_DUR; + ampdu->txpkt_weight = AMPDU_DEF_TXPKT_WEIGHT; + + ampdu->ffpld_rsvd = AMPDU_DEF_FFPLD_RSVD; + /* bump max ampdu rcv size to 64k for all 11n devices except 4321A0 and 4321A1 */ + if (WLCISNPHY(wlc->band) && NREV_LT(wlc->band->phyrev, 2)) + ampdu->rx_factor = AMPDU_RX_FACTOR_32K; + else + ampdu->rx_factor = AMPDU_RX_FACTOR_64K; +#ifdef WLC_HIGH_ONLY + /* Restrict to smaller rcv size for BMAC dongle */ + ampdu->rx_factor = AMPDU_RX_FACTOR_32K; +#endif + ampdu->retry_limit = AMPDU_DEF_RETRY_LIMIT; + ampdu->rr_retry_limit = AMPDU_DEF_RR_RETRY_LIMIT; + + for (i = 0; i < AMPDU_MAX_SCB_TID; i++) { + ampdu->retry_limit_tid[i] = ampdu->retry_limit; + ampdu->rr_retry_limit_tid[i] = ampdu->rr_retry_limit; + } + + ampdu_update_max_txlen(ampdu, ampdu->dur); + ampdu->mfbr = false; + /* try to set ampdu to the default value */ + wlc_ampdu_set(ampdu, wlc->pub->_ampdu); + + ampdu->tx_max_funl = FFPLD_TX_MAX_UNFL; + wlc_ffpld_init(ampdu); + + return ampdu; +} + +void wlc_ampdu_detach(ampdu_info_t *ampdu) +{ + int i; + + if (!ampdu) + return; + + /* free all ini's which were to be freed on callbacks which were never called */ + for (i = 0; i < AMPDU_INI_FREE; i++) { + if (ampdu->ini_free[i]) { + kfree(ampdu->ini_free[i]); + } + } + + wlc_module_unregister(ampdu->wlc->pub, "ampdu", ampdu); + kfree(ampdu); +} + +void scb_ampdu_cleanup(ampdu_info_t *ampdu, struct scb *scb) +{ + scb_ampdu_t *scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb); + u8 tid; + + WL_AMPDU_UPDN(("scb_ampdu_cleanup: enter\n")); + ASSERT(scb_ampdu); + + for (tid = 0; tid < AMPDU_MAX_SCB_TID; tid++) { + ampdu_cleanup_tid_ini(ampdu, scb_ampdu, tid, false); + } +} + +/* reset the ampdu state machine so that it can gracefully handle packets that were + * freed from the dma and tx queues during reinit + */ +void wlc_ampdu_reset(ampdu_info_t *ampdu) +{ + WL_NONE(("%s: Entering\n", __func__)); +} + +static void scb_ampdu_update_config(ampdu_info_t *ampdu, struct scb *scb) +{ + scb_ampdu_t *scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb); + int i; + + scb_ampdu->max_pdu = (u8) ampdu->wlc->pub->tunables->ampdunummpdu; + + /* go back to legacy size if some preloading is occuring */ + for (i = 0; i < NUM_FFPLD_FIFO; i++) { + if (ampdu->fifo_tb[i].ampdu_pld_size > FFPLD_PLD_INCR) + scb_ampdu->max_pdu = AMPDU_NUM_MPDU_LEGACY; + } + + /* apply user override */ + if (ampdu->max_pdu != AUTO) + scb_ampdu->max_pdu = (u8) ampdu->max_pdu; + + scb_ampdu->release = min_t(u8, scb_ampdu->max_pdu, AMPDU_SCB_MAX_RELEASE); + + if (scb_ampdu->max_rxlen) + scb_ampdu->release = + min_t(u8, scb_ampdu->release, scb_ampdu->max_rxlen / 1600); + + scb_ampdu->release = min(scb_ampdu->release, + ampdu->fifo_tb[TX_AC_BE_FIFO]. + mcs2ampdu_table[FFPLD_MAX_MCS]); + + ASSERT(scb_ampdu->release); +} + +void scb_ampdu_update_config_all(ampdu_info_t *ampdu) +{ + scb_ampdu_update_config(ampdu, ampdu->wlc->pub->global_scb); +} + +static void wlc_ffpld_init(ampdu_info_t *ampdu) +{ + int i, j; + wlc_fifo_info_t *fifo; + + for (j = 0; j < NUM_FFPLD_FIFO; j++) { + fifo = (ampdu->fifo_tb + j); + fifo->ampdu_pld_size = 0; + for (i = 0; i <= FFPLD_MAX_MCS; i++) + fifo->mcs2ampdu_table[i] = 255; + fifo->dmaxferrate = 0; + fifo->accum_txampdu = 0; + fifo->prev_txfunfl = 0; + fifo->accum_txfunfl = 0; + + } +} + +/* evaluate the dma transfer rate using the tx underflows as feedback. + * If necessary, increase tx fifo preloading. If not enough, + * decrease maximum ampdu size for each mcs till underflows stop + * Return 1 if pre-loading not active, -1 if not an underflow event, + * 0 if pre-loading module took care of the event. + */ +static int wlc_ffpld_check_txfunfl(wlc_info_t *wlc, int fid) +{ + ampdu_info_t *ampdu = wlc->ampdu; + u32 phy_rate = MCS_RATE(FFPLD_MAX_MCS, true, false); + u32 txunfl_ratio; + u8 max_mpdu; + u32 current_ampdu_cnt = 0; + u16 max_pld_size; + u32 new_txunfl; + wlc_fifo_info_t *fifo = (ampdu->fifo_tb + fid); + uint xmtfifo_sz; + u16 cur_txunfl; + + /* return if we got here for a different reason than underflows */ + cur_txunfl = + wlc_read_shm(wlc, + M_UCODE_MACSTAT + offsetof(macstat_t, txfunfl[fid])); + new_txunfl = (u16) (cur_txunfl - fifo->prev_txfunfl); + if (new_txunfl == 0) { + WL_FFPLD(("check_txunfl : TX status FRAG set but no tx underflows\n")); + return -1; + } + fifo->prev_txfunfl = cur_txunfl; + + if (!ampdu->tx_max_funl) + return 1; + + /* check if fifo is big enough */ + if (wlc_xmtfifo_sz_get(wlc, fid, &xmtfifo_sz)) { + WL_FFPLD(("check_txunfl : get xmtfifo_sz failed.\n")); + return -1; + } + + if ((TXFIFO_SIZE_UNIT * (u32) xmtfifo_sz) <= ampdu->ffpld_rsvd) + return 1; + + max_pld_size = TXFIFO_SIZE_UNIT * xmtfifo_sz - ampdu->ffpld_rsvd; + fifo->accum_txfunfl += new_txunfl; + + /* we need to wait for at least 10 underflows */ + if (fifo->accum_txfunfl < 10) + return 0; + + WL_FFPLD(("ampdu_count %d tx_underflows %d\n", + current_ampdu_cnt, fifo->accum_txfunfl)); + + /* + compute the current ratio of tx unfl per ampdu. + When the current ampdu count becomes too + big while the ratio remains small, we reset + the current count in order to not + introduce too big of a latency in detecting a + large amount of tx underflows later. + */ + + txunfl_ratio = current_ampdu_cnt / fifo->accum_txfunfl; + + if (txunfl_ratio > ampdu->tx_max_funl) { + if (current_ampdu_cnt >= FFPLD_MAX_AMPDU_CNT) { + fifo->accum_txfunfl = 0; + } + return 0; + } + max_mpdu = + min_t(u8, fifo->mcs2ampdu_table[FFPLD_MAX_MCS], AMPDU_NUM_MPDU_LEGACY); + + /* In case max value max_pdu is already lower than + the fifo depth, there is nothing more we can do. + */ + + if (fifo->ampdu_pld_size >= max_mpdu * FFPLD_MPDU_SIZE) { + WL_FFPLD(("tx fifo pld : max ampdu fits in fifo\n)")); + fifo->accum_txfunfl = 0; + return 0; + } + + if (fifo->ampdu_pld_size < max_pld_size) { + + /* increment by TX_FIFO_PLD_INC bytes */ + fifo->ampdu_pld_size += FFPLD_PLD_INCR; + if (fifo->ampdu_pld_size > max_pld_size) + fifo->ampdu_pld_size = max_pld_size; + + /* update scb release size */ + scb_ampdu_update_config_all(ampdu); + + /* + compute a new dma xfer rate for max_mpdu @ max mcs. + This is the minimum dma rate that + can acheive no unferflow condition for the current mpdu size. + */ + /* note : we divide/multiply by 100 to avoid integer overflows */ + fifo->dmaxferrate = + (((phy_rate / 100) * + (max_mpdu * FFPLD_MPDU_SIZE - fifo->ampdu_pld_size)) + / (max_mpdu * FFPLD_MPDU_SIZE)) * 100; + + WL_FFPLD(("DMA estimated transfer rate %d; pre-load size %d\n", + fifo->dmaxferrate, fifo->ampdu_pld_size)); + } else { + + /* decrease ampdu size */ + if (fifo->mcs2ampdu_table[FFPLD_MAX_MCS] > 1) { + if (fifo->mcs2ampdu_table[FFPLD_MAX_MCS] == 255) + fifo->mcs2ampdu_table[FFPLD_MAX_MCS] = + AMPDU_NUM_MPDU_LEGACY - 1; + else + fifo->mcs2ampdu_table[FFPLD_MAX_MCS] -= 1; + + /* recompute the table */ + wlc_ffpld_calc_mcs2ampdu_table(ampdu, fid); + + /* update scb release size */ + scb_ampdu_update_config_all(ampdu); + } + } + fifo->accum_txfunfl = 0; + return 0; +} + +static void wlc_ffpld_calc_mcs2ampdu_table(ampdu_info_t *ampdu, int f) +{ + int i; + u32 phy_rate, dma_rate, tmp; + u8 max_mpdu; + wlc_fifo_info_t *fifo = (ampdu->fifo_tb + f); + + /* recompute the dma rate */ + /* note : we divide/multiply by 100 to avoid integer overflows */ + max_mpdu = + min_t(u8, fifo->mcs2ampdu_table[FFPLD_MAX_MCS], AMPDU_NUM_MPDU_LEGACY); + phy_rate = MCS_RATE(FFPLD_MAX_MCS, true, false); + dma_rate = + (((phy_rate / 100) * + (max_mpdu * FFPLD_MPDU_SIZE - fifo->ampdu_pld_size)) + / (max_mpdu * FFPLD_MPDU_SIZE)) * 100; + fifo->dmaxferrate = dma_rate; + + /* fill up the mcs2ampdu table; do not recalc the last mcs */ + dma_rate = dma_rate >> 7; + for (i = 0; i < FFPLD_MAX_MCS; i++) { + /* shifting to keep it within integer range */ + phy_rate = MCS_RATE(i, true, false) >> 7; + if (phy_rate > dma_rate) { + tmp = ((fifo->ampdu_pld_size * phy_rate) / + ((phy_rate - dma_rate) * FFPLD_MPDU_SIZE)) + 1; + tmp = min_t(u32, tmp, 255); + fifo->mcs2ampdu_table[i] = (u8) tmp; + } + } +} + +static void BCMFASTPATH +wlc_ampdu_agg(ampdu_info_t *ampdu, struct scb *scb, void *p, uint prec) +{ + scb_ampdu_t *scb_ampdu; + scb_ampdu_tid_ini_t *ini; + u8 tid = (u8) PKTPRIO(p); + + scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb); + + /* initialize initiator on first packet; sends addba req */ + ini = SCB_AMPDU_INI(scb_ampdu, tid); + if (ini->magic != INI_MAGIC) { + ini = wlc_ampdu_init_tid_ini(ampdu, scb_ampdu, tid, false); + } + return; +} + +int BCMFASTPATH +wlc_sendampdu(ampdu_info_t *ampdu, wlc_txq_info_t *qi, void **pdu, int prec) +{ + wlc_info_t *wlc; + osl_t *osh; + void *p, *pkt[AMPDU_MAX_MPDU]; + u8 tid, ndelim; + int err = 0; + u8 preamble_type = WLC_GF_PREAMBLE; + u8 fbr_preamble_type = WLC_GF_PREAMBLE; + u8 rts_preamble_type = WLC_LONG_PREAMBLE; + u8 rts_fbr_preamble_type = WLC_LONG_PREAMBLE; + + bool rr = true, fbr = false; + uint i, count = 0, fifo, seg_cnt = 0; + u16 plen, len, seq = 0, mcl, mch, index, frameid, dma_len = 0; + u32 ampdu_len, maxlen = 0; + d11txh_t *txh = NULL; + u8 *plcp; + struct dot11_header *h; + struct scb *scb; + scb_ampdu_t *scb_ampdu; + scb_ampdu_tid_ini_t *ini; + u8 mcs = 0; + bool use_rts = false, use_cts = false; + ratespec_t rspec = 0, rspec_fallback = 0; + ratespec_t rts_rspec = 0, rts_rspec_fallback = 0; + u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ; + struct dot11_rts_frame *rts; + u8 rr_retry_limit; + wlc_fifo_info_t *f; + bool fbr_iscck; + struct ieee80211_tx_info *tx_info; + u16 qlen; + + wlc = ampdu->wlc; + osh = wlc->osh; + p = *pdu; + + ASSERT(p); + + tid = (u8) PKTPRIO(p); + ASSERT(tid < AMPDU_MAX_SCB_TID); + + f = ampdu->fifo_tb + prio2fifo[tid]; + + scb = wlc->pub->global_scb; + ASSERT(scb->magic == SCB_MAGIC); + + scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb); + ASSERT(scb_ampdu); + ini = &scb_ampdu->ini[tid]; + + /* Let pressure continue to build ... */ + qlen = pktq_plen(&qi->q, prec); + if (ini->tx_in_transit > 0 && qlen < scb_ampdu->max_pdu) { + return BCME_BUSY; + } + + wlc_ampdu_agg(ampdu, scb, p, tid); + + if (wlc->block_datafifo) { + WL_ERROR(("%s: Fifo blocked\n", __func__)); + return BCME_BUSY; + } + rr_retry_limit = ampdu->rr_retry_limit_tid[tid]; + ampdu_len = 0; + dma_len = 0; + while (p) { + struct ieee80211_tx_rate *txrate; + + tx_info = IEEE80211_SKB_CB(p); + txrate = tx_info->status.rates; + + if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) { + err = wlc_prep_pdu(wlc, p, &fifo); + } else { + WL_ERROR(("%s: AMPDU flag is off!\n", __func__)); + *pdu = NULL; + err = 0; + break; + } + + if (err) { + if (err == BCME_BUSY) { + WL_ERROR(("wl%d: wlc_sendampdu: prep_xdu retry; seq 0x%x\n", wlc->pub->unit, seq)); + WLCNTINCR(ampdu->cnt->sduretry); + *pdu = p; + break; + } + + /* error in the packet; reject it */ + WL_AMPDU_ERR(("wl%d: wlc_sendampdu: prep_xdu rejected; seq 0x%x\n", wlc->pub->unit, seq)); + WLCNTINCR(ampdu->cnt->sdurejected); + + *pdu = NULL; + break; + } + + /* pkt is good to be aggregated */ + ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU); + txh = (d11txh_t *) PKTDATA(p); + plcp = (u8 *) (txh + 1); + h = (struct dot11_header *)(plcp + D11_PHY_HDR_LEN); + seq = ltoh16(h->seq) >> SEQNUM_SHIFT; + index = TX_SEQ_TO_INDEX(seq); + + /* check mcl fields and test whether it can be agg'd */ + mcl = ltoh16(txh->MacTxControlLow); + mcl &= ~TXC_AMPDU_MASK; + fbr_iscck = !(ltoh16(txh->XtraFrameTypes) & 0x3); + ASSERT(!fbr_iscck); + txh->PreloadSize = 0; /* always default to 0 */ + + /* Handle retry limits */ + if (txrate[0].count <= rr_retry_limit) { + txrate[0].count++; + rr = true; + fbr = false; + ASSERT(!fbr); + } else { + fbr = true; + rr = false; + txrate[1].count++; + } + + /* extract the length info */ + len = fbr_iscck ? WLC_GET_CCK_PLCP_LEN(txh->FragPLCPFallback) + : WLC_GET_MIMO_PLCP_LEN(txh->FragPLCPFallback); + + /* retrieve null delimiter count */ + ndelim = txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM]; + seg_cnt += 1; + + WL_AMPDU_TX(("wl%d: wlc_sendampdu: mpdu %d plcp_len %d\n", + wlc->pub->unit, count, len)); + + /* + * aggregateable mpdu. For ucode/hw agg, + * test whether need to break or change the epoch + */ + if (count == 0) { + u16 fc; + mcl |= (TXC_AMPDU_FIRST << TXC_AMPDU_SHIFT); + /* refill the bits since might be a retx mpdu */ + mcl |= TXC_STARTMSDU; + rts = (struct dot11_rts_frame *)&txh->rts_frame; + fc = ltoh16(rts->fc); + if ((fc & FC_KIND_MASK) == FC_RTS) { + mcl |= TXC_SENDRTS; + use_rts = true; + } + if ((fc & FC_KIND_MASK) == FC_CTS) { + mcl |= TXC_SENDCTS; + use_cts = true; + } + } else { + mcl |= (TXC_AMPDU_MIDDLE << TXC_AMPDU_SHIFT); + mcl &= ~(TXC_STARTMSDU | TXC_SENDRTS | TXC_SENDCTS); + } + + len = roundup(len, 4); + ampdu_len += (len + (ndelim + 1) * AMPDU_DELIMITER_LEN); + + dma_len += (u16) pkttotlen(osh, p); + + WL_AMPDU_TX(("wl%d: wlc_sendampdu: ampdu_len %d seg_cnt %d null delim %d\n", wlc->pub->unit, ampdu_len, seg_cnt, ndelim)); + + txh->MacTxControlLow = htol16(mcl); + + /* this packet is added */ + pkt[count++] = p; + + /* patch the first MPDU */ + if (count == 1) { + u8 plcp0, plcp3, is40, sgi; + struct ieee80211_sta *sta; + + sta = tx_info->control.sta; + + if (rr) { + plcp0 = plcp[0]; + plcp3 = plcp[3]; + } else { + plcp0 = txh->FragPLCPFallback[0]; + plcp3 = txh->FragPLCPFallback[3]; + + } + is40 = (plcp0 & MIMO_PLCP_40MHZ) ? 1 : 0; + sgi = PLCP3_ISSGI(plcp3) ? 1 : 0; + mcs = plcp0 & ~MIMO_PLCP_40MHZ; + ASSERT(mcs < MCS_TABLE_SIZE); + maxlen = + min(scb_ampdu->max_rxlen, + ampdu->max_txlen[mcs][is40][sgi]); + + WL_NONE(("sendampdu: sgi %d, is40 %d, mcs %d\n", sgi, + is40, mcs)); + + maxlen = 64 * 1024; /* XXX Fix me to honor real max_rxlen */ + + if (is40) + mimo_ctlchbw = + CHSPEC_SB_UPPER(WLC_BAND_PI_RADIO_CHANSPEC) + ? PHY_TXC1_BW_20MHZ_UP : PHY_TXC1_BW_20MHZ; + + /* rebuild the rspec and rspec_fallback */ + rspec = RSPEC_MIMORATE; + rspec |= plcp[0] & ~MIMO_PLCP_40MHZ; + if (plcp[0] & MIMO_PLCP_40MHZ) + rspec |= (PHY_TXC1_BW_40MHZ << RSPEC_BW_SHIFT); + + if (fbr_iscck) /* CCK */ + rspec_fallback = + CCK_RSPEC(CCK_PHY2MAC_RATE + (txh->FragPLCPFallback[0])); + else { /* MIMO */ + rspec_fallback = RSPEC_MIMORATE; + rspec_fallback |= + txh->FragPLCPFallback[0] & ~MIMO_PLCP_40MHZ; + if (txh->FragPLCPFallback[0] & MIMO_PLCP_40MHZ) + rspec_fallback |= + (PHY_TXC1_BW_40MHZ << + RSPEC_BW_SHIFT); + } + + if (use_rts || use_cts) { + rts_rspec = + wlc_rspec_to_rts_rspec(wlc, rspec, false, + mimo_ctlchbw); + rts_rspec_fallback = + wlc_rspec_to_rts_rspec(wlc, rspec_fallback, + false, mimo_ctlchbw); + } + } + + /* if (first mpdu for host agg) */ + /* test whether to add more */ + if ((MCS_RATE(mcs, true, false) >= f->dmaxferrate) && + (count == f->mcs2ampdu_table[mcs])) { + WL_AMPDU_ERR(("wl%d: PR 37644: stopping ampdu at %d for mcs %d", wlc->pub->unit, count, mcs)); + break; + } + + if (count == scb_ampdu->max_pdu) { + WL_NONE(("Stop taking from q, reached %d deep\n", + scb_ampdu->max_pdu)); + break; + } + + /* check to see if the next pkt is a candidate for aggregation */ + p = pktq_ppeek(&qi->q, prec); + tx_info = IEEE80211_SKB_CB(p); /* tx_info must be checked with current p */ + + if (p) { + if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && + ((u8) PKTPRIO(p) == tid)) { + + plen = + pkttotlen(osh, p) + AMPDU_MAX_MPDU_OVERHEAD; + plen = max(scb_ampdu->min_len, plen); + + if ((plen + ampdu_len) > maxlen) { + p = NULL; + WL_ERROR(("%s: Bogus plen #1\n", + __func__)); + ASSERT(3 == 4); + continue; + } + + /* check if there are enough descriptors available */ + if (TXAVAIL(wlc, fifo) <= (seg_cnt + 1)) { + WL_ERROR(("%s: No fifo space !!!!!!\n", __func__)); + p = NULL; + continue; + } + p = pktq_pdeq(&qi->q, prec); + ASSERT(p); + } else { + p = NULL; + } + } + } /* end while(p) */ + + ini->tx_in_transit += count; + + if (count) { + WLCNTADD(ampdu->cnt->txmpdu, count); + + /* patch up the last txh */ + txh = (d11txh_t *) PKTDATA(pkt[count - 1]); + mcl = ltoh16(txh->MacTxControlLow); + mcl &= ~TXC_AMPDU_MASK; + mcl |= (TXC_AMPDU_LAST << TXC_AMPDU_SHIFT); + txh->MacTxControlLow = htol16(mcl); + + /* remove the null delimiter after last mpdu */ + ndelim = txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM]; + txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM] = 0; + ampdu_len -= ndelim * AMPDU_DELIMITER_LEN; + + /* remove the pad len from last mpdu */ + fbr_iscck = ((ltoh16(txh->XtraFrameTypes) & 0x3) == 0); + len = fbr_iscck ? WLC_GET_CCK_PLCP_LEN(txh->FragPLCPFallback) + : WLC_GET_MIMO_PLCP_LEN(txh->FragPLCPFallback); + ampdu_len -= roundup(len, 4) - len; + + /* patch up the first txh & plcp */ + txh = (d11txh_t *) PKTDATA(pkt[0]); + plcp = (u8 *) (txh + 1); + + WLC_SET_MIMO_PLCP_LEN(plcp, ampdu_len); + /* mark plcp to indicate ampdu */ + WLC_SET_MIMO_PLCP_AMPDU(plcp); + + /* reset the mixed mode header durations */ + if (txh->MModeLen) { + u16 mmodelen = + wlc_calc_lsig_len(wlc, rspec, ampdu_len); + txh->MModeLen = htol16(mmodelen); + preamble_type = WLC_MM_PREAMBLE; + } + if (txh->MModeFbrLen) { + u16 mmfbrlen = + wlc_calc_lsig_len(wlc, rspec_fallback, ampdu_len); + txh->MModeFbrLen = htol16(mmfbrlen); + fbr_preamble_type = WLC_MM_PREAMBLE; + } + + /* set the preload length */ + if (MCS_RATE(mcs, true, false) >= f->dmaxferrate) { + dma_len = min(dma_len, f->ampdu_pld_size); + txh->PreloadSize = htol16(dma_len); + } else + txh->PreloadSize = 0; + + mch = ltoh16(txh->MacTxControlHigh); + + /* update RTS dur fields */ + if (use_rts || use_cts) { + u16 durid; + rts = (struct dot11_rts_frame *)&txh->rts_frame; + if ((mch & TXC_PREAMBLE_RTS_MAIN_SHORT) == + TXC_PREAMBLE_RTS_MAIN_SHORT) + rts_preamble_type = WLC_SHORT_PREAMBLE; + + if ((mch & TXC_PREAMBLE_RTS_FB_SHORT) == + TXC_PREAMBLE_RTS_FB_SHORT) + rts_fbr_preamble_type = WLC_SHORT_PREAMBLE; + + durid = + wlc_compute_rtscts_dur(wlc, use_cts, rts_rspec, + rspec, rts_preamble_type, + preamble_type, ampdu_len, + true); + rts->durid = htol16(durid); + durid = wlc_compute_rtscts_dur(wlc, use_cts, + rts_rspec_fallback, + rspec_fallback, + rts_fbr_preamble_type, + fbr_preamble_type, + ampdu_len, true); + txh->RTSDurFallback = htol16(durid); + /* set TxFesTimeNormal */ + txh->TxFesTimeNormal = rts->durid; + /* set fallback rate version of TxFesTimeNormal */ + txh->TxFesTimeFallback = txh->RTSDurFallback; + } + + /* set flag and plcp for fallback rate */ + if (fbr) { + WLCNTADD(ampdu->cnt->txfbr_mpdu, count); + WLCNTINCR(ampdu->cnt->txfbr_ampdu); + mch |= TXC_AMPDU_FBR; + txh->MacTxControlHigh = htol16(mch); + WLC_SET_MIMO_PLCP_AMPDU(plcp); + WLC_SET_MIMO_PLCP_AMPDU(txh->FragPLCPFallback); + } + + WL_AMPDU_TX(("wl%d: wlc_sendampdu: count %d ampdu_len %d\n", + wlc->pub->unit, count, ampdu_len)); + + /* inform rate_sel if it this is a rate probe pkt */ + frameid = ltoh16(txh->TxFrameID); + if (frameid & TXFID_RATE_PROBE_MASK) { + WL_ERROR(("%s: XXX what to do with TXFID_RATE_PROBE_MASK!?\n", __func__)); + } +#ifdef WLC_HIGH_ONLY + if (wlc->rpc_agg & BCM_RPC_TP_HOST_AGG_AMPDU) + bcm_rpc_tp_agg_set(bcm_rpc_tp_get(wlc->rpc), + BCM_RPC_TP_HOST_AGG_AMPDU, true); +#endif + for (i = 0; i < count; i++) + wlc_txfifo(wlc, fifo, pkt[i], i == (count - 1), + ampdu->txpkt_weight); +#ifdef WLC_HIGH_ONLY + if (wlc->rpc_agg & BCM_RPC_TP_HOST_AGG_AMPDU) + bcm_rpc_tp_agg_set(bcm_rpc_tp_get(wlc->rpc), + BCM_RPC_TP_HOST_AGG_AMPDU, false); +#endif + + } + /* endif (count) */ + return err; +} + +void BCMFASTPATH +wlc_ampdu_dotxstatus(ampdu_info_t *ampdu, struct scb *scb, void *p, + tx_status_t *txs) +{ + scb_ampdu_t *scb_ampdu; + wlc_info_t *wlc = ampdu->wlc; + scb_ampdu_tid_ini_t *ini; + u32 s1 = 0, s2 = 0; + struct ieee80211_tx_info *tx_info; + + tx_info = IEEE80211_SKB_CB(p); + ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU); + ASSERT(scb); + ASSERT(scb->magic == SCB_MAGIC); + ASSERT(txs->status & TX_STATUS_AMPDU); + scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb); + ASSERT(scb_ampdu); + ini = SCB_AMPDU_INI(scb_ampdu, PKTPRIO(p)); + ASSERT(ini->scb == scb); + + /* BMAC_NOTE: For the split driver, second level txstatus comes later + * So if the ACK was received then wait for the second level else just + * call the first one + */ + if (txs->status & TX_STATUS_ACK_RCV) { +#ifdef WLC_LOW + u8 status_delay = 0; + + /* wait till the next 8 bytes of txstatus is available */ + while (((s1 = + R_REG(wlc->osh, + &wlc->regs->frmtxstatus)) & TXS_V) == 0) { + udelay(1); + status_delay++; + if (status_delay > 10) { + ASSERT(status_delay <= 10); + return; + } + } + + ASSERT(!(s1 & TX_STATUS_INTERMEDIATE)); + ASSERT(s1 & TX_STATUS_AMPDU); + s2 = R_REG(wlc->osh, &wlc->regs->frmtxstatus2); +#else /* WLC_LOW */ + + /* Store the relevant information in ampdu structure */ + WL_AMPDU_TX(("wl%d: wlc_ampdu_dotxstatus: High Recvd\n", + wlc->pub->unit)); + + ASSERT(!ampdu->p); + ampdu->p = p; + bcopy(txs, &du->txs, sizeof(tx_status_t)); + ampdu->waiting_status = true; + return; +#endif /* WLC_LOW */ + } + + wlc_ampdu_dotxstatus_complete(ampdu, scb, p, txs, s1, s2); + wlc_ampdu_txflowcontrol(wlc, scb_ampdu, ini); +} + +#ifdef WLC_HIGH_ONLY +void wlc_ampdu_txstatus_complete(ampdu_info_t *ampdu, u32 s1, u32 s2) +{ + WL_AMPDU_TX(("wl%d: wlc_ampdu_txstatus_complete: High Recvd 0x%x 0x%x p:%p\n", ampdu->wlc->pub->unit, s1, s2, ampdu->p)); + + ASSERT(ampdu->waiting_status); + + /* The packet may have been freed if the SCB went away, if so, then still free the + * DMA chain + */ + if (ampdu->p) { + struct ieee80211_tx_info *tx_info; + struct scb *scb; + + tx_info = IEEE80211_SKB_CB(ampdu->p); + scb = (struct scb *)tx_info->control.sta->drv_priv; + + wlc_ampdu_dotxstatus_complete(ampdu, scb, ampdu->p, &du->txs, + s1, s2); + ampdu->p = NULL; + } + + ampdu->waiting_status = false; +} +#endif /* WLC_HIGH_ONLY */ +void rate_status(wlc_info_t *wlc, struct ieee80211_tx_info *tx_info, + tx_status_t *txs, u8 mcs); + +void +rate_status(wlc_info_t *wlc, struct ieee80211_tx_info *tx_info, + tx_status_t *txs, u8 mcs) +{ + struct ieee80211_tx_rate *txrate = tx_info->status.rates; + int i; + + /* clear the rest of the rates */ + for (i = 2; i < IEEE80211_TX_MAX_RATES; i++) { + txrate[i].idx = -1; + txrate[i].count = 0; + } +} + +extern void wlc_txq_enq(wlc_info_t *wlc, struct scb *scb, void *sdu, + uint prec); + +#define SHORTNAME "AMPDU status" + +static void BCMFASTPATH +wlc_ampdu_dotxstatus_complete(ampdu_info_t *ampdu, struct scb *scb, void *p, + tx_status_t *txs, u32 s1, u32 s2) +{ + scb_ampdu_t *scb_ampdu; + wlc_info_t *wlc = ampdu->wlc; + scb_ampdu_tid_ini_t *ini; + u8 bitmap[8], queue, tid; + d11txh_t *txh; + u8 *plcp; + struct dot11_header *h; + u16 seq, start_seq = 0, bindex, index, mcl; + u8 mcs = 0; + bool ba_recd = false, ack_recd = false; + u8 suc_mpdu = 0, tot_mpdu = 0; + uint supr_status; + bool update_rate = true, retry = true, tx_error = false; + u16 mimoantsel = 0; + u8 antselid = 0; + u8 retry_limit, rr_retry_limit; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(p); + +#ifdef BCMDBG + u8 hole[AMPDU_MAX_MPDU]; + bzero(hole, sizeof(hole)); +#endif + + ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU); + ASSERT(txs->status & TX_STATUS_AMPDU); + + scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb); + ASSERT(scb_ampdu); + + tid = (u8) PKTPRIO(p); + + ini = SCB_AMPDU_INI(scb_ampdu, tid); + retry_limit = ampdu->retry_limit_tid[tid]; + rr_retry_limit = ampdu->rr_retry_limit_tid[tid]; + + ASSERT(ini->scb == scb); + + bzero(bitmap, sizeof(bitmap)); + queue = txs->frameid & TXFID_QUEUE_MASK; + ASSERT(queue < AC_COUNT); + + supr_status = txs->status & TX_STATUS_SUPR_MASK; + + if (txs->status & TX_STATUS_ACK_RCV) { + if (TX_STATUS_SUPR_UF == supr_status) { + update_rate = false; + } + + ASSERT(txs->status & TX_STATUS_INTERMEDIATE); + start_seq = txs->sequence >> SEQNUM_SHIFT; + bitmap[0] = (txs->status & TX_STATUS_BA_BMAP03_MASK) >> + TX_STATUS_BA_BMAP03_SHIFT; + + ASSERT(!(s1 & TX_STATUS_INTERMEDIATE)); + ASSERT(s1 & TX_STATUS_AMPDU); + + bitmap[0] |= + (s1 & TX_STATUS_BA_BMAP47_MASK) << + TX_STATUS_BA_BMAP47_SHIFT; + bitmap[1] = (s1 >> 8) & 0xff; + bitmap[2] = (s1 >> 16) & 0xff; + bitmap[3] = (s1 >> 24) & 0xff; + + bitmap[4] = s2 & 0xff; + bitmap[5] = (s2 >> 8) & 0xff; + bitmap[6] = (s2 >> 16) & 0xff; + bitmap[7] = (s2 >> 24) & 0xff; + + ba_recd = true; + } else { + WLCNTINCR(ampdu->cnt->noba); + if (supr_status) { + update_rate = false; + if (supr_status == TX_STATUS_SUPR_BADCH) { + WL_ERROR(("%s: Pkt tx suppressed, illegal channel possibly %d\n", __func__, CHSPEC_CHANNEL(wlc->default_bss->chanspec))); + } else { + if (supr_status == TX_STATUS_SUPR_FRAG) + WL_NONE(("%s: AMPDU frag err\n", + __func__)); + else + WL_ERROR(("%s: wlc_ampdu_dotxstatus: supr_status 0x%x\n", __func__, supr_status)); + } + /* no need to retry for badch; will fail again */ + if (supr_status == TX_STATUS_SUPR_BADCH || + supr_status == TX_STATUS_SUPR_EXPTIME) { + retry = false; + WLCNTINCR(wlc->pub->_cnt->txchanrej); + } else if (supr_status == TX_STATUS_SUPR_EXPTIME) { + + WLCNTINCR(wlc->pub->_cnt->txexptime); + + /* TX underflow : try tuning pre-loading or ampdu size */ + } else if (supr_status == TX_STATUS_SUPR_FRAG) { + /* if there were underflows, but pre-loading is not active, + notify rate adaptation. + */ + if (wlc_ffpld_check_txfunfl(wlc, prio2fifo[tid]) + > 0) { + tx_error = true; +#ifdef WLC_HIGH_ONLY + /* With BMAC, TX Underflows should not happen */ + WL_ERROR(("wl%d: BMAC TX Underflow?", + wlc->pub->unit)); +#endif + } + } + } else if (txs->phyerr) { + update_rate = false; + WLCNTINCR(wlc->pub->_cnt->txphyerr); + WL_ERROR(("wl%d: wlc_ampdu_dotxstatus: tx phy error (0x%x)\n", wlc->pub->unit, txs->phyerr)); + +#ifdef BCMDBG + if (WL_ERROR_ON()) { + prpkt("txpkt (AMPDU)", wlc->osh, p); + wlc_print_txdesc((d11txh_t *) PKTDATA(p)); + wlc_print_txstatus(txs); + } +#endif /* BCMDBG */ + } + } + + /* loop through all pkts and retry if not acked */ + while (p) { + tx_info = IEEE80211_SKB_CB(p); + ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU); + txh = (d11txh_t *) PKTDATA(p); + mcl = ltoh16(txh->MacTxControlLow); + plcp = (u8 *) (txh + 1); + h = (struct dot11_header *)(plcp + D11_PHY_HDR_LEN); + seq = ltoh16(h->seq) >> SEQNUM_SHIFT; + + if (tot_mpdu == 0) { + mcs = plcp[0] & MIMO_PLCP_MCS_MASK; + mimoantsel = ltoh16(txh->ABI_MimoAntSel); + } + + index = TX_SEQ_TO_INDEX(seq); + ack_recd = false; + if (ba_recd) { + bindex = MODSUB_POW2(seq, start_seq, SEQNUM_MAX); + + WL_AMPDU_TX(("%s: tid %d seq is %d, start_seq is %d, " + "bindex is %d set %d, index %d\n", + __func__, tid, seq, start_seq, bindex, + isset(bitmap, bindex), index)); + + /* if acked then clear bit and free packet */ + if ((bindex < AMPDU_TX_BA_MAX_WSIZE) + && isset(bitmap, bindex)) { + ini->tx_in_transit--; + ini->txretry[index] = 0; + + /* ampdu_ack_len: number of acked aggregated frames */ + /* ampdu_ack_map: block ack bit map for the aggregation */ + /* ampdu_len: number of aggregated frames */ + rate_status(wlc, tx_info, txs, mcs); + tx_info->flags |= IEEE80211_TX_STAT_ACK; + tx_info->flags |= IEEE80211_TX_STAT_AMPDU; + + /* XXX TODO: Make these accurate. */ + tx_info->status.ampdu_ack_len = + (txs-> + status & TX_STATUS_FRM_RTX_MASK) >> + TX_STATUS_FRM_RTX_SHIFT; + tx_info->status.ampdu_len = + (txs-> + status & TX_STATUS_FRM_RTX_MASK) >> + TX_STATUS_FRM_RTX_SHIFT; + + PKTPULL(p, D11_PHY_HDR_LEN); + PKTPULL(p, D11_TXH_LEN); + + ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, + p); + ack_recd = true; + suc_mpdu++; + } + } + /* either retransmit or send bar if ack not recd */ + if (!ack_recd) { + struct ieee80211_tx_rate *txrate = + tx_info->status.rates; + if (retry && (txrate[0].count < (int)retry_limit)) { + ini->txretry[index]++; + ini->tx_in_transit--; + /* Use high prededence for retransmit to give some punch */ + /* wlc_txq_enq(wlc, scb, p, WLC_PRIO_TO_PREC(tid)); */ + wlc_txq_enq(wlc, scb, p, + WLC_PRIO_TO_HI_PREC(tid)); + } else { + /* Retry timeout */ + ini->tx_in_transit--; + ieee80211_tx_info_clear_status(tx_info); + tx_info->flags |= + IEEE80211_TX_STAT_AMPDU_NO_BACK; + PKTPULL(p, D11_PHY_HDR_LEN); + PKTPULL(p, D11_TXH_LEN); + WL_ERROR(("%s: BA Timeout, seq %d, in_transit %d\n", SHORTNAME, seq, ini->tx_in_transit)); + ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, + p); + } + } + tot_mpdu++; + + /* break out if last packet of ampdu */ + if (((mcl & TXC_AMPDU_MASK) >> TXC_AMPDU_SHIFT) == + TXC_AMPDU_LAST) + break; + + p = GETNEXTTXP(wlc, queue); + if (p == NULL) { + ASSERT(p); + break; + } + } + wlc_send_q(wlc, wlc->active_queue); + + /* update rate state */ + if (WLANTSEL_ENAB(wlc)) + antselid = wlc_antsel_antsel2id(wlc->asi, mimoantsel); + + wlc_txfifo_complete(wlc, queue, ampdu->txpkt_weight); +} + +static void +ampdu_cleanup_tid_ini(ampdu_info_t *ampdu, scb_ampdu_t *scb_ampdu, u8 tid, + bool force) +{ + scb_ampdu_tid_ini_t *ini; + ini = SCB_AMPDU_INI(scb_ampdu, tid); + if (!ini) + return; + + WL_AMPDU_CTL(("wl%d: ampdu_cleanup_tid_ini: tid %d\n", + ampdu->wlc->pub->unit, tid)); + + if (ini->tx_in_transit && !force) + return; + + scb_ampdu = SCB_AMPDU_CUBBY(ampdu, ini->scb); + ASSERT(ini == &scb_ampdu->ini[ini->tid]); + + /* free all buffered tx packets */ + pktq_pflush(ampdu->wlc->osh, &scb_ampdu->txq, ini->tid, true, NULL, 0); +} + +/* initialize the initiator code for tid */ +static scb_ampdu_tid_ini_t *wlc_ampdu_init_tid_ini(ampdu_info_t *ampdu, + scb_ampdu_t *scb_ampdu, + u8 tid, bool override) +{ + scb_ampdu_tid_ini_t *ini; + + ASSERT(scb_ampdu); + ASSERT(scb_ampdu->scb); + ASSERT(SCB_AMPDU(scb_ampdu->scb)); + ASSERT(tid < AMPDU_MAX_SCB_TID); + + /* check for per-tid control of ampdu */ + if (!ampdu->ini_enable[tid]) { + WL_ERROR(("%s: Rejecting tid %d\n", __func__, tid)); + return NULL; + } + + ini = SCB_AMPDU_INI(scb_ampdu, tid); + ini->tid = tid; + ini->scb = scb_ampdu->scb; + ini->magic = INI_MAGIC; + WLCNTINCR(ampdu->cnt->txaddbareq); + + return ini; +} + +int wlc_ampdu_set(ampdu_info_t *ampdu, bool on) +{ + wlc_info_t *wlc = ampdu->wlc; + + wlc->pub->_ampdu = false; + + if (on) { + if (!N_ENAB(wlc->pub)) { + WL_AMPDU_ERR(("wl%d: driver not nmode enabled\n", + wlc->pub->unit)); + return BCME_UNSUPPORTED; + } + if (!wlc_ampdu_cap(ampdu)) { + WL_AMPDU_ERR(("wl%d: device not ampdu capable\n", + wlc->pub->unit)); + return BCME_UNSUPPORTED; + } + wlc->pub->_ampdu = on; + } + + return 0; +} + +bool wlc_ampdu_cap(ampdu_info_t *ampdu) +{ + if (WLC_PHY_11N_CAP(ampdu->wlc->band)) + return true; + else + return false; +} + +static void ampdu_update_max_txlen(ampdu_info_t *ampdu, u8 dur) +{ + u32 rate, mcs; + + for (mcs = 0; mcs < MCS_TABLE_SIZE; mcs++) { + /* rate is in Kbps; dur is in msec ==> len = (rate * dur) / 8 */ + /* 20MHz, No SGI */ + rate = MCS_RATE(mcs, false, false); + ampdu->max_txlen[mcs][0][0] = (rate * dur) >> 3; + /* 40 MHz, No SGI */ + rate = MCS_RATE(mcs, true, false); + ampdu->max_txlen[mcs][1][0] = (rate * dur) >> 3; + /* 20MHz, SGI */ + rate = MCS_RATE(mcs, false, true); + ampdu->max_txlen[mcs][0][1] = (rate * dur) >> 3; + /* 40 MHz, SGI */ + rate = MCS_RATE(mcs, true, true); + ampdu->max_txlen[mcs][1][1] = (rate * dur) >> 3; + } +} + +u8 BCMFASTPATH +wlc_ampdu_null_delim_cnt(ampdu_info_t *ampdu, struct scb *scb, + ratespec_t rspec, int phylen) +{ + scb_ampdu_t *scb_ampdu; + int bytes, cnt, tmp; + u8 tx_density; + + ASSERT(scb); + ASSERT(SCB_AMPDU(scb)); + + scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb); + ASSERT(scb_ampdu); + + if (scb_ampdu->mpdu_density == 0) + return 0; + + /* RSPEC2RATE is in kbps units ==> ~RSPEC2RATE/2^13 is in bytes/usec + density x is in 2^(x-4) usec + ==> # of bytes needed for req density = rate/2^(17-x) + ==> # of null delimiters = ceil(ceil(rate/2^(17-x)) - phylen)/4) + */ + + tx_density = scb_ampdu->mpdu_density; + + ASSERT(tx_density <= AMPDU_MAX_MPDU_DENSITY); + tmp = 1 << (17 - tx_density); + bytes = CEIL(RSPEC2RATE(rspec), tmp); + + if (bytes > phylen) { + cnt = CEIL(bytes - phylen, AMPDU_DELIMITER_LEN); + ASSERT(cnt <= 255); + return (u8) cnt; + } else + return 0; +} + +void wlc_ampdu_macaddr_upd(wlc_info_t *wlc) +{ + char template[T_RAM_ACCESS_SZ * 2]; + + /* driver needs to write the ta in the template; ta is at offset 16 */ + bzero(template, sizeof(template)); + bcopy((char *)wlc->pub->cur_etheraddr.octet, template, ETHER_ADDR_LEN); + wlc_write_template_ram(wlc, (T_BA_TPL_BASE + 16), (T_RAM_ACCESS_SZ * 2), + template); +} + +bool wlc_aggregatable(wlc_info_t *wlc, u8 tid) +{ + return wlc->ampdu->ini_enable[tid]; +} + +void wlc_ampdu_shm_upd(ampdu_info_t *ampdu) +{ + wlc_info_t *wlc = ampdu->wlc; + + /* Extend ucode internal watchdog timer to match larger received frames */ + if ((ampdu->rx_factor & HT_PARAMS_RX_FACTOR_MASK) == + AMPDU_RX_FACTOR_64K) { + wlc_write_shm(wlc, M_MIMO_MAXSYM, MIMO_MAXSYM_MAX); + wlc_write_shm(wlc, M_WATCHDOG_8TU, WATCHDOG_8TU_MAX); + } else { + wlc_write_shm(wlc, M_MIMO_MAXSYM, MIMO_MAXSYM_DEF); + wlc_write_shm(wlc, M_WATCHDOG_8TU, WATCHDOG_8TU_DEF); + } +} |
