diff options
Diffstat (limited to 'drivers/staging/brcm80211/include/sbpcmcia.h')
| -rw-r--r-- | drivers/staging/brcm80211/include/sbpcmcia.h | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/drivers/staging/brcm80211/include/sbpcmcia.h b/drivers/staging/brcm80211/include/sbpcmcia.h new file mode 100644 index 0000000..6b9923f5 --- /dev/null +++ b/drivers/staging/brcm80211/include/sbpcmcia.h @@ -0,0 +1,217 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _SBPCMCIA_H +#define _SBPCMCIA_H + +/* All the addresses that are offsets in attribute space are divided + * by two to account for the fact that odd bytes are invalid in + * attribute space and our read/write routines make the space appear + * as if they didn't exist. Still we want to show the original numbers + * as documented in the hnd_pcmcia core manual. + */ + +/* PCMCIA Function Configuration Registers */ +#define PCMCIA_FCR (0x700 / 2) + +#define FCR0_OFF 0 +#define FCR1_OFF (0x40 / 2) +#define FCR2_OFF (0x80 / 2) +#define FCR3_OFF (0xc0 / 2) + +#define PCMCIA_FCR0 (0x700 / 2) +#define PCMCIA_FCR1 (0x740 / 2) +#define PCMCIA_FCR2 (0x780 / 2) +#define PCMCIA_FCR3 (0x7c0 / 2) + +/* Standard PCMCIA FCR registers */ + +#define PCMCIA_COR 0 + +#define COR_RST 0x80 +#define COR_LEV 0x40 +#define COR_IRQEN 0x04 +#define COR_BLREN 0x01 +#define COR_FUNEN 0x01 + +#define PCICIA_FCSR (2 / 2) +#define PCICIA_PRR (4 / 2) +#define PCICIA_SCR (6 / 2) +#define PCICIA_ESR (8 / 2) + +#define PCM_MEMOFF 0x0000 +#define F0_MEMOFF 0x1000 +#define F1_MEMOFF 0x2000 +#define F2_MEMOFF 0x3000 +#define F3_MEMOFF 0x4000 + +/* Memory base in the function fcr's */ +#define MEM_ADDR0 (0x728 / 2) +#define MEM_ADDR1 (0x72a / 2) +#define MEM_ADDR2 (0x72c / 2) + +/* PCMCIA base plus Srom access in fcr0: */ +#define PCMCIA_ADDR0 (0x072e / 2) +#define PCMCIA_ADDR1 (0x0730 / 2) +#define PCMCIA_ADDR2 (0x0732 / 2) + +#define MEM_SEG (0x0734 / 2) +#define SROM_CS (0x0736 / 2) +#define SROM_DATAL (0x0738 / 2) +#define SROM_DATAH (0x073a / 2) +#define SROM_ADDRL (0x073c / 2) +#define SROM_ADDRH (0x073e / 2) +#define SROM_INFO2 (0x0772 / 2) /* Corerev >= 2 && <= 5 */ +#define SROM_INFO (0x07be / 2) /* Corerev >= 6 */ + +/* Values for srom_cs: */ +#define SROM_IDLE 0 +#define SROM_WRITE 1 +#define SROM_READ 2 +#define SROM_WEN 4 +#define SROM_WDS 7 +#define SROM_DONE 8 + +/* Fields in srom_info: */ +#define SRI_SZ_MASK 0x03 +#define SRI_BLANK 0x04 +#define SRI_OTP 0x80 + +#if !defined(ESTA_POSTMOGRIFY_REMOVAL) +/* CIS stuff */ + +/* The CIS stops where the FCRs start */ +#define CIS_SIZE PCMCIA_FCR + +/* CIS tuple length field max */ +#define CIS_TUPLE_LEN_MAX 0xff + +/* Standard tuples we know about */ + +#define CISTPL_NULL 0x00 +#define CISTPL_VERS_1 0x15 /* CIS ver, manf, dev & ver strings */ +#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ +#define CISTPL_FUNCID 0x21 /* Function identification */ +#define CISTPL_FUNCE 0x22 /* Function extensions */ +#define CISTPL_CFTABLE 0x1b /* Config table entry */ +#define CISTPL_END 0xff /* End of the CIS tuple chain */ + +/* Function identifier provides context for the function extentions tuple */ +#define CISTPL_FID_SDIO 0x0c /* Extensions defined by SDIO spec */ + +/* Function extensions for LANs (assumed for extensions other than SDIO) */ +#define LAN_TECH 1 /* Technology type */ +#define LAN_SPEED 2 /* Raw bit rate */ +#define LAN_MEDIA 3 /* Transmission media */ +#define LAN_NID 4 /* Node identification (aka MAC addr) */ +#define LAN_CONN 5 /* Connector standard */ + +/* CFTable */ +#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ +#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ +#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ + +/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll + * take one for HNBU, and use "extensions" (a la FUNCE) within it. + */ + +#define CISTPL_BRCM_HNBU 0x80 + +/* Subtypes of BRCM_HNBU: */ + +#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */ +#define HNBU_CHIPID 0x01 /* Two 16bit values: PCI vendor & device id */ +#define HNBU_BOARDREV 0x02 /* One byte board revision */ +#define HNBU_PAPARMS 0x03 /* PA parameters: 8 (sromrev == 1) + * or 9 (sromrev > 1) bytes + */ +#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */ +#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */ +#define HNBU_AA 0x06 /* Antennas available */ +#define HNBU_AG 0x07 /* Antenna gain */ +#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */ +#define HNBU_LEDS 0x09 /* LED set */ +#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl) + * in rev 2 + */ +#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */ +#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */ +#define HNBU_GPIOTIMER 0x0d /* 2 bytes with on/off values in rev 3 */ +#define HNBU_PAPARMS5G 0x0e /* 5G PA params */ +#define HNBU_ANT5G 0x0f /* 4328 5G antennas available/gain */ +#define HNBU_RDLID 0x10 /* 2 byte USB remote downloader (RDL) product Id */ +#define HNBU_RSSISMBXA2G 0x11 /* 4328 2G RSSI mid pt sel & board switch arch, + * 2 bytes, rev 3. + */ +#define HNBU_RSSISMBXA5G 0x12 /* 4328 5G RSSI mid pt sel & board switch arch, + * 2 bytes, rev 3. + */ +#define HNBU_XTALFREQ 0x13 /* 4 byte Crystal frequency in kilohertz */ +#define HNBU_TRI2G 0x14 /* 4328 2G TR isolation, 1 byte */ +#define HNBU_TRI5G 0x15 /* 4328 5G TR isolation, 3 bytes */ +#define HNBU_RXPO2G 0x16 /* 4328 2G RX power offset, 1 byte */ +#define HNBU_RXPO5G 0x17 /* 4328 5G RX power offset, 1 byte */ +#define HNBU_BOARDNUM 0x18 /* board serial number, independent of mac addr */ +#define HNBU_MACADDR 0x19 /* mac addr override for the standard CIS LAN_NID */ +#define HNBU_RDLSN 0x1a /* 2 bytes; serial # advertised in USB descriptor */ +#define HNBU_BOARDTYPE 0x1b /* 2 bytes; boardtype */ +#define HNBU_LEDDC 0x1c /* 2 bytes; LED duty cycle */ +#define HNBU_HNBUCIS 0x1d /* what follows is proprietary HNBU CIS format */ +#define HNBU_PAPARMS_SSLPNPHY 0x1e /* SSLPNPHY PA params */ +#define HNBU_RSSISMBXA2G_SSLPNPHY 0x1f /* SSLPNPHY RSSI mid pt sel & board switch arch */ +#define HNBU_RDLRNDIS 0x20 /* 1 byte; 1 = RDL advertises RNDIS config */ +#define HNBU_CHAINSWITCH 0x21 /* 2 byte; txchain, rxchain */ +#define HNBU_REGREV 0x22 /* 1 byte; */ +#define HNBU_FEM 0x23 /* 2 or 4 byte: 11n frontend specification */ +#define HNBU_PAPARMS_C0 0x24 /* 8 or 30 bytes: 11n pa paramater for chain 0 */ +#define HNBU_PAPARMS_C1 0x25 /* 8 or 30 bytes: 11n pa paramater for chain 1 */ +#define HNBU_PAPARMS_C2 0x26 /* 8 or 30 bytes: 11n pa paramater for chain 2 */ +#define HNBU_PAPARMS_C3 0x27 /* 8 or 30 bytes: 11n pa paramater for chain 3 */ +#define HNBU_PO_CCKOFDM 0x28 /* 6 or 18 bytes: cck2g/ofdm2g/ofdm5g power offset */ +#define HNBU_PO_MCS2G 0x29 /* 8 bytes: mcs2g power offset */ +#define HNBU_PO_MCS5GM 0x2a /* 8 bytes: mcs5g mid band power offset */ +#define HNBU_PO_MCS5GLH 0x2b /* 16 bytes: mcs5g low-high band power offset */ +#define HNBU_PO_CDD 0x2c /* 2 bytes: cdd2g/5g power offset */ +#define HNBU_PO_STBC 0x2d /* 2 bytes: stbc2g/5g power offset */ +#define HNBU_PO_40M 0x2e /* 2 bytes: 40Mhz channel 2g/5g power offset */ +#define HNBU_PO_40MDUP 0x2f /* 2 bytes: 40Mhz channel dup 2g/5g power offset */ + +#define HNBU_RDLRWU 0x30 /* 1 byte; 1 = RDL advertises Remote Wake-up */ +#define HNBU_WPS 0x31 /* 1 byte; GPIO pin for WPS button */ +#define HNBU_USBFS 0x32 /* 1 byte; 1 = USB advertises FS mode only */ +#define HNBU_BRMIN 0x33 /* 4 byte bootloader min resource mask */ +#define HNBU_BRMAX 0x34 /* 4 byte bootloader max resource mask */ +#define HNBU_PATCH 0x35 /* bootloader patch addr(2b) & data(4b) pair */ +#define HNBU_CCKFILTTYPE 0x36 /* CCK digital filter selection options */ +#define HNBU_OFDMPO5G 0x37 /* 4 * 3 = 12 byte 11a ofdm power offsets in rev 3 */ + +#define HNBU_USBEPNUM 0x40 /* USB endpoint numbers */ +#define HNBU_SROM3SWRGN 0x80 /* 78 bytes; srom rev 3 s/w region without crc8 + * plus extra info appended. + */ +#define HNBU_RESERVED 0x81 /* Reserved for non-BRCM post-mfg additions */ +#define HNBU_CUSTOM1 0x82 /* 4 byte; For non-BRCM post-mfg additions */ +#define HNBU_CUSTOM2 0x83 /* Reserved; For non-BRCM post-mfg additions */ +#endif /* !defined(ESTA_POSTMOGRIFY_REMOVAL) */ + +/* sbtmstatelow */ +#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */ +#define SBTML_INT_EN 0x20000 /* enable sb interrupt */ + +/* sbtmstatehigh */ +#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */ + +#endif /* _SBPCMCIA_H */ |
