diff options
Diffstat (limited to 'drivers/staging/brcm80211/include/brcmu_wifi.h')
-rw-r--r-- | drivers/staging/brcm80211/include/brcmu_wifi.h | 243 |
1 files changed, 0 insertions, 243 deletions
diff --git a/drivers/staging/brcm80211/include/brcmu_wifi.h b/drivers/staging/brcm80211/include/brcmu_wifi.h deleted file mode 100644 index fde592b..0000000 --- a/drivers/staging/brcm80211/include/brcmu_wifi.h +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCMU_WIFI_H_ -#define _BRCMU_WIFI_H_ - -#include <linux/if_ether.h> /* for ETH_ALEN */ -#include <linux/ieee80211.h> /* for WLAN_PMKID_LEN */ - -/* A chanspec holds the channel number, band, bandwidth and control sideband */ -typedef u16 chanspec_t; - -/* channel defines */ -#define CH_UPPER_SB 0x01 -#define CH_LOWER_SB 0x02 -#define CH_EWA_VALID 0x04 -#define CH_20MHZ_APART 4 -#define CH_10MHZ_APART 2 -#define CH_5MHZ_APART 1 /* 2G band channels are 5 Mhz apart */ -#define CH_MAX_2G_CHANNEL 14 /* Max channel in 2G band */ -#define BRCM_MAX_2G_CHANNEL CH_MAX_2G_CHANNEL /* legacy define */ -#define MAXCHANNEL 224 /* max # supported channels. The max channel no is 216, - * this is that + 1 rounded up to a multiple of NBBY (8). - * DO NOT MAKE it > 255: channels are u8's all over - */ - -#define WL_CHANSPEC_CHAN_MASK 0x00ff -#define WL_CHANSPEC_CHAN_SHIFT 0 - -#define WL_CHANSPEC_CTL_SB_MASK 0x0300 -#define WL_CHANSPEC_CTL_SB_SHIFT 8 -#define WL_CHANSPEC_CTL_SB_LOWER 0x0100 -#define WL_CHANSPEC_CTL_SB_UPPER 0x0200 -#define WL_CHANSPEC_CTL_SB_NONE 0x0300 - -#define WL_CHANSPEC_BW_MASK 0x0C00 -#define WL_CHANSPEC_BW_SHIFT 10 -#define WL_CHANSPEC_BW_10 0x0400 -#define WL_CHANSPEC_BW_20 0x0800 -#define WL_CHANSPEC_BW_40 0x0C00 - -#define WL_CHANSPEC_BAND_MASK 0xf000 -#define WL_CHANSPEC_BAND_SHIFT 12 -#define WL_CHANSPEC_BAND_5G 0x1000 -#define WL_CHANSPEC_BAND_2G 0x2000 -#define INVCHANSPEC 255 - -/* used to calculate the chan_freq = chan_factor * 500Mhz + 5 * chan_number */ -#define WF_CHAN_FACTOR_2_4_G 4814 /* 2.4 GHz band, 2407 MHz */ -#define WF_CHAN_FACTOR_5_G 10000 /* 5 GHz band, 5000 MHz */ -#define WF_CHAN_FACTOR_4_G 8000 /* 4.9 GHz band for Japan */ - -/* channel defines */ -#define LOWER_20_SB(channel) (((channel) > CH_10MHZ_APART) ? ((channel) - CH_10MHZ_APART) : 0) -#define UPPER_20_SB(channel) (((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \ - ((channel) + CH_10MHZ_APART) : 0) -#define CHSPEC_BANDUNIT(chspec) (CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : \ - BAND_2G_INDEX) -#define CH20MHZ_CHSPEC(channel) (chanspec_t)((chanspec_t)(channel) | WL_CHANSPEC_BW_20 | \ - WL_CHANSPEC_CTL_SB_NONE | (((channel) <= CH_MAX_2G_CHANNEL) ? \ - WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G)) -#define NEXT_20MHZ_CHAN(channel) (((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \ - ((channel) + CH_20MHZ_APART) : 0) -#define CH40MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ - ((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \ - ((channel) <= CH_MAX_2G_CHANNEL ? WL_CHANSPEC_BAND_2G : \ - WL_CHANSPEC_BAND_5G)) -#define CHSPEC_CHANNEL(chspec) ((u8)((chspec) & WL_CHANSPEC_CHAN_MASK)) -#define CHSPEC_BAND(chspec) ((chspec) & WL_CHANSPEC_BAND_MASK) - -#ifdef WL11N_20MHZONLY - -#define CHSPEC_CTL_SB(chspec) WL_CHANSPEC_CTL_SB_NONE -#define CHSPEC_BW(chspec) WL_CHANSPEC_BW_20 -#define CHSPEC_IS10(chspec) 0 -#define CHSPEC_IS20(chspec) 1 -#ifndef CHSPEC_IS40 -#define CHSPEC_IS40(chspec) 0 -#endif - -#else /* !WL11N_20MHZONLY */ - -#define CHSPEC_CTL_SB(chspec) ((chspec) & WL_CHANSPEC_CTL_SB_MASK) -#define CHSPEC_BW(chspec) ((chspec) & WL_CHANSPEC_BW_MASK) -#define CHSPEC_IS10(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10) -#define CHSPEC_IS20(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20) -#ifndef CHSPEC_IS40 -#define CHSPEC_IS40(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40) -#endif - -#endif /* !WL11N_20MHZONLY */ - -#define CHSPEC_IS5G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G) -#define CHSPEC_IS2G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G) -#define CHSPEC_SB_NONE(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_NONE) -#define CHSPEC_SB_UPPER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER) -#define CHSPEC_SB_LOWER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER) -#define CHSPEC_CTL_CHAN(chspec) ((CHSPEC_SB_LOWER(chspec)) ? \ - (LOWER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))) : \ - (UPPER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK)))) -#define CHSPEC2BAND(chspec) (CHSPEC_IS5G(chspec) ? BRCM_BAND_5G : BRCM_BAND_2G) - -#define CHANSPEC_STR_LEN 8 - -/* defined rate in 500kbps */ -#define BRCM_MAXRATE 108 /* in 500kbps units */ -#define BRCM_RATE_1M 2 /* in 500kbps units */ -#define BRCM_RATE_2M 4 /* in 500kbps units */ -#define BRCM_RATE_5M5 11 /* in 500kbps units */ -#define BRCM_RATE_11M 22 /* in 500kbps units */ -#define BRCM_RATE_6M 12 /* in 500kbps units */ -#define BRCM_RATE_9M 18 /* in 500kbps units */ -#define BRCM_RATE_12M 24 /* in 500kbps units */ -#define BRCM_RATE_18M 36 /* in 500kbps units */ -#define BRCM_RATE_24M 48 /* in 500kbps units */ -#define BRCM_RATE_36M 72 /* in 500kbps units */ -#define BRCM_RATE_48M 96 /* in 500kbps units */ -#define BRCM_RATE_54M 108 /* in 500kbps units */ - -#define BRCM_2G_25MHZ_OFFSET 5 /* 2.4GHz band channel offset */ - -#define MCSSET_LEN 16 - -#define AC_BITMAP_TST(ab, ac) (((ab) & (1 << (ac))) != 0) - -/* - * Verify the chanspec is using a legal set of parameters, i.e. that the - * chanspec specified a band, bw, ctl_sb and channel and that the - * combination could be legal given any set of circumstances. - * RETURNS: true is the chanspec is malformed, false if it looks good. - */ -extern bool brcmu_chspec_malformed(chanspec_t chanspec); - -/* - * This function returns the channel number that control traffic is being sent on, for legacy - * channels this is just the channel number, for 40MHZ channels it is the upper or lowre 20MHZ - * sideband depending on the chanspec selected - */ -extern u8 brcmu_chspec_ctlchan(chanspec_t chspec); - -/* - * Return the channel number for a given frequency and base frequency. - * The returned channel number is relative to the given base frequency. - * If the given base frequency is zero, a base frequency of 5 GHz is assumed for - * frequencies from 5 - 6 GHz, and 2.407 GHz is assumed for 2.4 - 2.5 GHz. - * - * Frequency is specified in MHz. - * The base frequency is specified as (start_factor * 500 kHz). - * Constants WF_CHAN_FACTOR_2_4_G, WF_CHAN_FACTOR_5_G are defined for - * 2.4 GHz and 5 GHz bands. - * - * The returned channel will be in the range [1, 14] in the 2.4 GHz band - * and [0, 200] otherwise. - * -1 is returned if the start_factor is WF_CHAN_FACTOR_2_4_G and the - * frequency is not a 2.4 GHz channel, or if the frequency is not and even - * multiple of 5 MHz from the base frequency to the base plus 1 GHz. - * - * Reference 802.11 REVma, section 17.3.8.3, and 802.11B section 18.4.6.2 - */ -extern int brcmu_mhz2channel(uint freq, uint start_factor); - -/* Enumerate crypto algorithms */ -#define CRYPTO_ALGO_OFF 0 -#define CRYPTO_ALGO_WEP1 1 -#define CRYPTO_ALGO_TKIP 2 -#define CRYPTO_ALGO_WEP128 3 -#define CRYPTO_ALGO_AES_CCM 4 -#define CRYPTO_ALGO_AES_RESERVED1 5 -#define CRYPTO_ALGO_AES_RESERVED2 6 -#define CRYPTO_ALGO_NALG 7 - -/* wireless security bitvec */ -#define WEP_ENABLED 0x0001 -#define TKIP_ENABLED 0x0002 -#define AES_ENABLED 0x0004 -#define WSEC_SWFLAG 0x0008 -#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ - -/* WPA authentication mode bitvec */ -#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ -#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ -#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ -#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ -#define WPA_AUTH_RESERVED1 0x0008 -#define WPA_AUTH_RESERVED2 0x0010 - /* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */ -#define WPA2_AUTH_RESERVED1 0x0020 -#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ -#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ -#define WPA2_AUTH_RESERVED3 0x0200 -#define WPA2_AUTH_RESERVED4 0x0400 -#define WPA2_AUTH_RESERVED5 0x0800 - -/* pmkid */ -#define MAXPMKID 16 - -#define DOT11_DEFAULT_RTS_LEN 2347 -#define DOT11_DEFAULT_FRAG_LEN 2346 - -#define DOT11_ICV_AES_LEN 8 -#define DOT11_QOS_LEN 2 -#define DOT11_IV_MAX_LEN 8 -#define DOT11_A4_HDR_LEN 30 - -#define HT_CAP_RX_STBC_NO 0x0 -#define HT_CAP_RX_STBC_ONE_STREAM 0x1 - -typedef struct _pmkid { - u8 BSSID[ETH_ALEN]; - u8 PMKID[WLAN_PMKID_LEN]; -} pmkid_t; - -typedef struct _pmkid_list { - u32 npmkid; - pmkid_t pmkid[1]; -} pmkid_list_t; - -typedef struct _pmkid_cand { - u8 BSSID[ETH_ALEN]; - u8 preauth; -} pmkid_cand_t; - -typedef struct _pmkid_cand_list { - u32 npmkid_cand; - pmkid_cand_t pmkid_cand[1]; -} pmkid_cand_list_t; - -typedef u8 ac_bitmap_t; - -#endif /* _BRCMU_WIFI_H_ */ |