diff options
Diffstat (limited to 'drivers/staging/brcm80211/include/bcmdevs.h')
| -rw-r--r-- | drivers/staging/brcm80211/include/bcmdevs.h | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/drivers/staging/brcm80211/include/bcmdevs.h b/drivers/staging/brcm80211/include/bcmdevs.h new file mode 100644 index 0000000..075883a --- /dev/null +++ b/drivers/staging/brcm80211/include/bcmdevs.h @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _BCMDEVS_H +#define _BCMDEVS_H + +/* PCI vendor IDs */ +#define VENDOR_BROADCOM 0x14e4 + +/* DONGLE VID/PIDs */ +#define BCM_DNGL_VID 0x0a5c +#define BCM_DNGL_BDC_PID 0x0bdc + +#define BCM4325_D11DUAL_ID 0x431b +#define BCM4325_D11G_ID 0x431c +#define BCM4325_D11A_ID 0x431d +#define BCM4329_D11N_ID 0x432e /* 4329 802.11n dualband device */ +#define BCM4329_D11N2G_ID 0x432f /* 4329 802.11n 2.4G device */ +#define BCM4329_D11N5G_ID 0x4330 /* 4329 802.11n 5G device */ +#define BCM4329_D11NDUAL_ID 0x432e + +#define BCM4319_D11N_ID 0x4337 /* 4319 802.11n dualband device */ +#define BCM4319_D11N2G_ID 0x4338 /* 4319 802.11n 2.4G device */ +#define BCM4319_D11N5G_ID 0x4339 /* 4319 802.11n 5G device */ + +#define BCM43224_D11N_ID 0x4353 /* 43224 802.11n dualband device */ +#define BCM43225_D11N2G_ID 0x4357 /* 43225 802.11n 2.4GHz device */ + +#define BCM43236_D11N_ID 0x4346 /* 43236 802.11n dualband device */ +#define BCM43236_D11N2G_ID 0x4347 /* 43236 802.11n 2.4GHz device */ +#define BCM43236_D11N5G_ID 0x4348 /* 43236 802.11n 5GHz device */ + +#define BCM43421_D11N_ID 0xA99D /* 43421 802.11n dualband device */ +#define BCM4313_D11N2G_ID 0x4727 /* 4313 802.11n 2.4G device */ +#define BCM4330_D11N_ID 0x4360 /* 4330 802.11n dualband device */ +#define BCM4330_D11N2G_ID 0x4361 /* 4330 802.11n 2.4G device */ +#define BCM4330_D11N5G_ID 0x4362 /* 4330 802.11n 5G device */ +#define BCM4336_D11N_ID 0x4343 /* 4336 802.11n 2.4GHz device */ +#define BCM6362_D11N_ID 0x435f /* 6362 802.11n dualband device */ +#define BCM4331_D11N_ID 0x4331 /* 4331 802.11n dualband id */ +#define BCM4331_D11N2G_ID 0x4332 /* 4331 802.11n 2.4Ghz band id */ +#define BCM4331_D11N5G_ID 0x4333 /* 4331 802.11n 5Ghz band id */ + +/* Chip IDs */ +#define BCM4313_CHIP_ID 0x4313 /* 4313 chip id */ +#define BCM4319_CHIP_ID 0x4319 /* 4319 chip id */ + +#define BCM43224_CHIP_ID 43224 /* 43224 chipcommon chipid */ +#define BCM43225_CHIP_ID 43225 /* 43225 chipcommon chipid */ +#define BCM43228_CHIP_ID 43228 /* 43228 chipcommon chipid */ +#define BCM43421_CHIP_ID 43421 /* 43421 chipcommon chipid */ +#define BCM43235_CHIP_ID 43235 /* 43235 chipcommon chipid */ +#define BCM43236_CHIP_ID 43236 /* 43236 chipcommon chipid */ +#define BCM43238_CHIP_ID 43238 /* 43238 chipcommon chipid */ +#define BCM4329_CHIP_ID 0x4329 /* 4329 chipcommon chipid */ +#define BCM4325_CHIP_ID 0x4325 /* 4325 chipcommon chipid */ +#define BCM4331_CHIP_ID 0x4331 /* 4331 chipcommon chipid */ +#define BCM4336_CHIP_ID 0x4336 /* 4336 chipcommon chipid */ +#define BCM4330_CHIP_ID 0x4330 /* 4330 chipcommon chipid */ +#define BCM6362_CHIP_ID 0x6362 /* 6362 chipcommon chipid */ + +/* these are router chips */ +#define BCM4716_CHIP_ID 0x4716 /* 4716 chipcommon chipid */ +#define BCM47162_CHIP_ID 47162 /* 47162 chipcommon chipid */ +#define BCM4748_CHIP_ID 0x4748 /* 4716 chipcommon chipid (OTP, RBBU) */ +#define BCM5356_CHIP_ID 0x5356 /* 5356 chipcommon chipid */ +#define BCM5357_CHIP_ID 0x5357 /* 5357 chipcommon chipid */ + +/* Package IDs */ +#define BCM4329_289PIN_PKG_ID 0 /* 4329 289-pin package id */ +#define BCM4329_182PIN_PKG_ID 1 /* 4329N 182-pin package id */ +#define BCM4716_PKG_ID 8 /* 4716 package id */ +#define BCM4717_PKG_ID 9 /* 4717 package id */ +#define BCM4718_PKG_ID 10 /* 4718 package id */ +#define BCM5356_PKG_NONMODE 1 /* 5356 package without nmode suppport */ +#define BCM5358U_PKG_ID 8 /* 5358U package id */ +#define BCM5358_PKG_ID 9 /* 5358 package id */ +#define BCM47186_PKG_ID 10 /* 47186 package id */ +#define BCM5357_PKG_ID 11 /* 5357 package id */ +#define BCM5356U_PKG_ID 12 /* 5356U package id */ +#define HDLSIM5350_PKG_ID 1 /* HDL simulator package id for a 5350 */ +#define HDLSIM_PKG_ID 14 /* HDL simulator package id */ +#define HWSIM_PKG_ID 15 /* Hardware simulator package id */ +#define BCM43224_FAB_CSM 0x8 /* the chip is manufactured by CSM */ +#define BCM43224_FAB_SMIC 0xa /* the chip is manufactured by SMIC */ +#define BCM4336_WLBGA_PKG_ID 0x8 + +/* boardflags */ +#define BFL_RESERVED1 0x00000001 +#define BFL_PACTRL 0x00000002 /* Board has gpio 9 controlling the PA */ +#define BFL_AIRLINEMODE 0x00000004 /* Board implements gpio 13 radio disable indication */ +#define BFL_ADCDIV 0x00000008 /* Board has the rssi ADC divider */ +#define BFL_ENETROBO 0x00000010 /* Board has robo switch or core */ +#define BFL_NOPLLDOWN 0x00000020 /* Not ok to power down the chip pll and oscillator */ +#define BFL_CCKHIPWR 0x00000040 /* Can do high-power CCK transmission */ +#define BFL_ENETADM 0x00000080 /* Board has ADMtek switch */ +#define BFL_ENETVLAN 0x00000100 /* Board has VLAN capability */ +#define BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ +#define BFL_FEM 0x00000800 /* Board supports the Front End Module */ +#define BFL_EXTLNA 0x00001000 /* Board has an external LNA in 2.4GHz band */ +#define BFL_HGPA 0x00002000 /* Board has a high gain PA */ +#define BFL_RESERVED2 0x00004000 +#define BFL_ALTIQ 0x00008000 /* Alternate I/Q settings */ +#define BFL_NOPA 0x00010000 /* Board has no PA */ +#define BFL_RSSIINV 0x00020000 /* Board's RSSI uses positive slope(not TSSI) */ +#define BFL_PAREF 0x00040000 /* Board uses the PARef LDO */ +#define BFL_3TSWITCH 0x00080000 /* Board uses a triple throw switch shared with BT */ +#define BFL_PHASESHIFT 0x00100000 /* Board can support phase shifter */ +#define BFL_BUCKBOOST 0x00200000 /* Power topology uses BUCKBOOST */ +#define BFL_FEM_BT 0x00400000 /* Board has FEM and switch to share antenna w/ BT */ +#define BFL_NOCBUCK 0x00800000 /* Power topology doesn't use CBUCK */ +#define BFL_CCKFAVOREVM 0x01000000 /* Favor CCK EVM over spectral mask */ +#define BFL_PALDO 0x02000000 /* Power topology uses PALDO */ +#define BFL_LNLDO2_2P5 0x04000000 /* Select 2.5V as LNLDO2 output voltage */ +#define BFL_FASTPWR 0x08000000 +#define BFL_UCPWRCTL_MININDX 0x08000000 /* Enforce min power index to avoid FEM damage */ +#define BFL_EXTLNA_5GHz 0x10000000 /* Board has an external LNA in 5GHz band */ +#define BFL_TRSW_1by2 0x20000000 /* Board has 2 TRSW's in 1by2 designs */ +#define BFL_LO_TRSW_R_5GHz 0x40000000 /* In 5G do not throw TRSW to T for clipLO gain */ +#define BFL_ELNA_GAINDEF 0x80000000 /* Backoff InitGain based on elna_2g/5g field + * when this flag is set + */ + +/* boardflags2 */ +#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* Board has an external rxbb regulator */ +#define BFL2_APLL_WAR 0x00000002 /* Flag to implement alternative A-band PLL settings */ +#define BFL2_TXPWRCTRL_EN 0x00000004 /* Board permits enabling TX Power Control */ +#define BFL2_2X4_DIV 0x00000008 /* Board supports the 2X4 diversity switch */ +#define BFL2_5G_PWRGAIN 0x00000010 /* Board supports 5G band power gain */ +#define BFL2_PCIEWAR_OVR 0x00000020 /* Board overrides ASPM and Clkreq settings */ +#define BFL2_CAESERS_BRD 0x00000040 /* Board is Caesers brd (unused by sw) */ +#define BFL2_LEGACY 0x00000080 +#define BFL2_SKWRKFEM_BRD 0x00000100 /* 4321mcm93 board uses Skyworks FEM */ +#define BFL2_SPUR_WAR 0x00000200 /* Board has a WAR for clock-harmonic spurs */ +#define BFL2_GPLL_WAR 0x00000400 /* Flag to narrow G-band PLL loop b/w */ +#define BFL2_TRISTATE_LED 0x00000800 /* Tri-state the LED */ +#define BFL2_SINGLEANT_CCK 0x00001000 /* Tx CCK pkts on Ant 0 only */ +#define BFL2_2G_SPUR_WAR 0x00002000 /* WAR to reduce and avoid clock-harmonic spurs in 2G */ +#define BFL2_BPHY_ALL_TXCORES 0x00004000 /* Transmit bphy frames using all tx cores */ +#define BFL2_FCC_BANDEDGE_WAR 0x00008000 /* using 40Mhz LPF for 20Mhz bandedge channels */ +#define BFL2_GPLL_WAR2 0x00010000 /* Flag to widen G-band PLL loop b/w */ +#define BFL2_IPALVLSHIFT_3P3 0x00020000 +#define BFL2_INTERNDET_TXIQCAL 0x00040000 /* Use internal envelope detector for TX IQCAL */ +#define BFL2_XTALBUFOUTEN 0x00080000 /* Keep the buffered Xtal output from radio "ON" + * Most drivers will turn it off without this flag + * to save power. + */ + +/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ +#define BOARD_GPIO_RESERVED1 0x010 +#define BOARD_GPIO_RESERVED2 0x020 +#define BOARD_GPIO_RESERVED3 0x080 +#define BOARD_GPIO_RESERVED4 0x100 +#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ +#define BOARD_GPIO_12 0x1000 /* gpio 12 */ +#define BOARD_GPIO_13 0x2000 /* gpio 13 */ +#define BOARD_GPIO_RESERVED5 0x0800 +#define BOARD_GPIO_RESERVED6 0x2000 +#define BOARD_GPIO_RESERVED7 0x4000 +#define BOARD_GPIO_RESERVED8 0x8000 + +#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ +#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ +#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal power-up */ +#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL power-down */ + +/* power control defines */ +#define PLL_DELAY 150 /* us pll on delay */ +#define FREF_DELAY 200 /* us fref change delay */ +#define MIN_SLOW_CLK 32 /* us Slow clock period */ +#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ + +/* # of GPIO pins */ +#define GPIO_NUMPINS 16 + +/* Reference board types */ +#define SPI_BOARD 0x0402 + +#endif /* _BCMDEVS_H */ |
