1 files changed, 81 insertions, 0 deletions
diff --git a/drivers/staging/bcm/target_params.h b/drivers/staging/bcm/target_params.h
new file mode 100644
index 0000000..2d8b8a3
--- /dev/null
+++ b/drivers/staging/bcm/target_params.h
@@ -0,0 +1,81 @@
+#ifndef TARGET_PARAMS_H
+#define TARGET_PARAMS_H
+
+typedef struct _TARGET_PARAMS
+{
+      B_UINT32 m_u32CfgVersion;
+
+      // Scanning Related Params
+      B_UINT32 m_u32CenterFrequency;
+      B_UINT32 m_u32BandAScan;
+      B_UINT32 m_u32BandBScan;
+      B_UINT32 m_u32BandCScan;
+
+
+      // QoS Params
+      B_UINT32 m_u32ErtpsOptions;
+
+      B_UINT32 m_u32PHSEnable;
+
+
+      // HO Params
+      B_UINT32 m_u32HoEnable;
+
+      B_UINT32 m_u32HoReserved1;
+      B_UINT32 m_u32HoReserved2;
+      // Power Control Params
+
+      B_UINT32 m_u32MimoEnable;
+
+      B_UINT32 m_u32SecurityEnable;
+
+      B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
+	  /* PowerSaving Mode Options:
+	     bit 0 = 1: CPE mode - to keep pcmcia if alive;
+	     bit 1 = 1: CINR reporing in Idlemode Msg
+	     bit 2 = 1: Default PSC Enable in sleepmode*/
+      B_UINT32 m_u32PowerSavingModeOptions;
+
+      B_UINT32 m_u32ArqEnable;
+
+      // From Version #3, the HARQ section renamed as general
+      B_UINT32 m_u32HarqEnable;
+       // EEPROM Param Location
+       B_UINT32  m_u32EEPROMFlag;
+       // BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
+       // Unused - LSByte
+      B_UINT32   m_u32Customize;
+      B_UINT32   m_u32ConfigBW;  /* In Hz */
+      B_UINT32   m_u32ShutDownInitThresholdTimer;
+
+      B_UINT32  m_u32RadioParameter;
+      B_UINT32  m_u32PhyParameter1;
+      B_UINT32  m_u32PhyParameter2;
+      B_UINT32  m_u32PhyParameter3;
+
+      B_UINT32	  m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
+
+	B_UINT32 m_u32MaxMACDataperDLFrame;
+	B_UINT32 m_u32MaxMACDataperULFrame;
+
+	B_UINT32 m_u32Corr2MacFlags;
+
+    //adding driver params.
+	B_UINT32 HostDrvrConfig1;
+    B_UINT32 HostDrvrConfig2;
+    B_UINT32 HostDrvrConfig3;
+    B_UINT32 HostDrvrConfig4;
+    B_UINT32 HostDrvrConfig5;
+    B_UINT32 HostDrvrConfig6;
+    B_UINT32 m_u32SegmentedPUSCenable;
+
+	// removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
+
+    //BAMC Related Parameters
+    //Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 – Enable Band AMC signaling.
+    //bit 16-31 Band AMC Data configuration: Bit 16 = 1 – Band AMC 2x3 support.
+	B_UINT32 m_u32BandAMCEnable;
+
+} stTargetParams,TARGET_PARAMS,*PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
+
+#endif