1 files changed, 106 insertions, 0 deletions
diff --git a/drivers/staging/bcm/led_control.h b/drivers/staging/bcm/led_control.h
new file mode 100644
index 0000000..0711ac2
--- /dev/null
+++ b/drivers/staging/bcm/led_control.h
@@ -0,0 +1,106 @@
+#ifndef _LED_CONTROL_H
+#define _LED_CONTROL_H
+
+/*************************TYPE DEF**********************/
+#define NUM_OF_LEDS 4
+
+#define DSD_START_OFFSET                     0x0200
+#define EEPROM_VERSION_OFFSET           	 0x020E
+#define EEPROM_HW_PARAM_POINTER_ADDRESS 	 0x0218
+#define EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5 0x0220
+#define GPIO_SECTION_START_OFFSET        	 0x03
+
+#define COMPATIBILITY_SECTION_LENGTH         42
+#define COMPATIBILITY_SECTION_LENGTH_MAP5    84
+
+
+#define EEPROM_MAP5_MAJORVERSION             5
+#define EEPROM_MAP5_MINORVERSION             0
+
+
+#define MAX_NUM_OF_BLINKS 					10
+#define NUM_OF_GPIO_PINS 					16
+
+#define DISABLE_GPIO_NUM 					0xFF
+#define EVENT_SIGNALED 						1
+
+#define MAX_FILE_NAME_BUFFER_SIZE 			100
+
+#define TURN_ON_LED(GPIO, index) do{ \
+							UINT gpio_val = GPIO; \
+							(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
+							wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_SET_REG, &gpio_val ,sizeof(gpio_val)) : \
+							wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
+						}while(0);
+
+#define TURN_OFF_LED(GPIO, index)  do { \
+							UINT gpio_val = GPIO; \
+							(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
+							wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_CLR_REG,&gpio_val ,sizeof(gpio_val)) : \
+							wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_SET_REG,&gpio_val ,sizeof(gpio_val));  \
+						}while(0);
+
+#define B_ULONG32 unsigned long
+
+/*******************************************************/
+
+
+typedef enum _LEDColors{
+	RED_LED = 1,
+	BLUE_LED = 2,
+	YELLOW_LED = 3,
+	GREEN_LED = 4
+} LEDColors; 				/*Enumerated values of different LED types*/
+
+typedef enum LedEvents {
+	SHUTDOWN_EXIT = 0x00,
+	DRIVER_INIT = 0x1,
+	FW_DOWNLOAD = 0x2,
+	FW_DOWNLOAD_DONE = 0x4,
+	NO_NETWORK_ENTRY = 0x8,
+	NORMAL_OPERATION = 0x10,
+	LOWPOWER_MODE_ENTER = 0x20,
+	IDLEMODE_CONTINUE = 0x40,
+	IDLEMODE_EXIT = 0x80,
+	LED_THREAD_INACTIVE = 0x100,  //Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold.
+	LED_THREAD_ACTIVE = 0x200    //Makes the LED Thread Active back.
+} LedEventInfo_t;			/*Enumerated values of different driver states*/
+
+#define DRIVER_HALT 0xff
+
+
+/*Structure which stores the information of different LED types
+ *  and corresponding LED state information of driver states*/
+typedef struct LedStateInfo_t
+{
+	UCHAR LED_Type; /* specify GPIO number - use 0xFF if not used */
+	UCHAR LED_On_State; /* Bits set or reset for different states */
+	UCHAR LED_Blink_State; /* Bits set or reset for blinking LEDs for different states */
+	UCHAR GPIO_Num;
+	UCHAR 			BitPolarity;				/*To represent whether H/W is normal polarity or reverse
+											  polarity*/
+}LEDStateInfo, *pLEDStateInfo;
+
+
+typedef struct _LED_INFO_STRUCT
+{
+	LEDStateInfo	LEDState[NUM_OF_LEDS];
+	BOOLEAN 		bIdleMode_tx_from_host; /*Variable to notify whether driver came out
+											from idlemode due to Host or target*/
+	BOOLEAN			bIdle_led_off;
+	wait_queue_head_t   notify_led_event;
+	wait_queue_head_t	idleModeSyncEvent;
+ 	struct task_struct  *led_cntrl_threadid;
+    int                 led_thread_running;
+	BOOLEAN			bLedInitDone;
+
+} LED_INFO_STRUCT, *PLED_INFO_STRUCT;
+//LED Thread state.
+#define BCM_LED_THREAD_DISABLED			 	 0 //LED Thread is not running.
+#define BCM_LED_THREAD_RUNNING_ACTIVELY  	 1 //LED thread is running.
+#define BCM_LED_THREAD_RUNNING_INACTIVELY	 2 //LED thread has been put on hold
+
+
+
+#endif
+