diff options
Diffstat (limited to 'drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c')
-rw-r--r-- | drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c | 1273 |
1 files changed, 0 insertions, 1273 deletions
diff --git a/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c b/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c deleted file mode 100644 index 5f5d677..0000000 --- a/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c +++ /dev/null @@ -1,1273 +0,0 @@ -//------------------------------------------------------------------------------ -// <copyright file="hif.c" company="Atheros"> -// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved. -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -//------------------------------------------------------------------------------ -//============================================================================== -// HIF layer reference implementation for Linux Native MMC stack -// -// Author(s): ="Atheros" -//============================================================================== -#include <linux/mmc/card.h> -#include <linux/mmc/mmc.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sdio_func.h> -#include <linux/mmc/sdio_ids.h> -#include <linux/mmc/sdio.h> -#include <linux/mmc/sd.h> -#include <linux/kthread.h> - -/* by default setup a bounce buffer for the data packets, if the underlying host controller driver - does not use DMA you may be able to skip this step and save the memory allocation and transfer time */ -#define HIF_USE_DMA_BOUNCE_BUFFER 1 -#include "hif_internal.h" -#define ATH_MODULE_NAME hif -#include "a_debug.h" -#include "hw/mbox_host_reg.h" - -#if HIF_USE_DMA_BOUNCE_BUFFER -/* macro to check if DMA buffer is WORD-aligned and DMA-able. Most host controllers assume the - * buffer is DMA'able and will bug-check otherwise (i.e. buffers on the stack). - * virt_addr_valid check fails on stack memory. - */ -#define BUFFER_NEEDS_BOUNCE(buffer) (((unsigned long)(buffer) & 0x3) || !virt_addr_valid((buffer))) -#else -#define BUFFER_NEEDS_BOUNCE(buffer) (false) -#endif - -/* ATHENV */ -#if defined(CONFIG_PM) -#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev) -#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv) -#endif /* CONFIG_PM */ -static void delHifDevice(struct hif_device * device); -static int Func0_CMD52WriteByte(struct mmc_card *card, unsigned int address, unsigned char byte); -static int Func0_CMD52ReadByte(struct mmc_card *card, unsigned int address, unsigned char *byte); - -static int hifEnableFunc(struct hif_device *device, struct sdio_func *func); -static int hifDisableFunc(struct hif_device *device, struct sdio_func *func); -OSDRV_CALLBACKS osdrvCallbacks; - -int reset_sdio_on_unload = 0; -module_param(reset_sdio_on_unload, int, 0644); - -extern u32 nohifscattersupport; - -static struct hif_device *ath6kl_alloc_hifdev(struct sdio_func *func) -{ - struct hif_device *hifdevice; - - hifdevice = kzalloc(sizeof(struct hif_device), GFP_KERNEL); - -#if HIF_USE_DMA_BOUNCE_BUFFER - hifdevice->dma_buffer = kmalloc(HIF_DMA_BUFFER_SIZE, GFP_KERNEL); -#endif - hifdevice->func = func; - hifdevice->powerConfig = HIF_DEVICE_POWER_UP; - sdio_set_drvdata(func, hifdevice); - - return hifdevice; -} - -static struct hif_device *ath6kl_get_hifdev(struct sdio_func *func) -{ - return (struct hif_device *) sdio_get_drvdata(func); -} - -static const struct sdio_device_id ath6kl_hifdev_ids[] = { - { SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6002_BASE | 0x0)) }, - { SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6002_BASE | 0x1)) }, - { SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6003_BASE | 0x0)) }, - { SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6003_BASE | 0x1)) }, - { /* null */ }, -}; - -MODULE_DEVICE_TABLE(sdio, ath6kl_hifdev_ids); - -static int ath6kl_hifdev_probe(struct sdio_func *func, - const struct sdio_device_id *id) -{ - int ret; - struct hif_device *device; - int count; - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, - ("ath6kl: Function: 0x%X, Vendor ID: 0x%X, " - "Device ID: 0x%X, block size: 0x%X/0x%X\n", - func->num, func->vendor, func->device, - func->max_blksize, func->cur_blksize)); - - ath6kl_alloc_hifdev(func); - device = ath6kl_get_hifdev(func); - - device->id = id; - device->is_disabled = true; - - spin_lock_init(&device->lock); - spin_lock_init(&device->asynclock); - - DL_LIST_INIT(&device->ScatterReqHead); - - /* Try to allow scatter unless globally overridden */ - if (!nohifscattersupport) - device->scatter_enabled = true; - - A_MEMZERO(device->busRequest, sizeof(device->busRequest)); - - for (count = 0; count < BUS_REQUEST_MAX_NUM; count++) { - sema_init(&device->busRequest[count].sem_req, 0); - hifFreeBusRequest(device, &device->busRequest[count]); - } - - sema_init(&device->sem_async, 0); - - ret = hifEnableFunc(device, func); - - return ret; -} - -static void ath6kl_hifdev_remove(struct sdio_func *func) -{ - int status = 0; - struct hif_device *device; - - device = ath6kl_get_hifdev(func); - if (device->claimedContext != NULL) - status = osdrvCallbacks. - deviceRemovedHandler(device->claimedContext, device); - - if (device->is_disabled) - device->is_disabled = false; - else - status = hifDisableFunc(device, func); - - CleanupHIFScatterResources(device); - - delHifDevice(device); -} - -#if defined(CONFIG_PM) -static int ath6kl_hifdev_suspend(struct device *dev) -{ - struct sdio_func *func = dev_to_sdio_func(dev); - int status = 0; - struct hif_device *device; - - device = ath6kl_get_hifdev(func); - - if (device && device->claimedContext && - osdrvCallbacks.deviceSuspendHandler) { - /* set true first for PowerStateChangeNotify(..) */ - device->is_suspend = true; - status = osdrvCallbacks. - deviceSuspendHandler(device->claimedContext); - if (status) - device->is_suspend = false; - } - - CleanupHIFScatterResources(device); - - switch (status) { - case 0: - return 0; - case A_EBUSY: - /* Hack for kernel in order to support deep sleep and wow */ - return -EBUSY; - default: - return -1; - } -} - -static int ath6kl_hifdev_resume(struct device *dev) -{ - struct sdio_func *func = dev_to_sdio_func(dev); - int status = 0; - struct hif_device *device; - - device = ath6kl_get_hifdev(func); - if (device && device->claimedContext && - osdrvCallbacks.deviceSuspendHandler) { - status = osdrvCallbacks. - deviceResumeHandler(device->claimedContext); - if (status == 0) - device->is_suspend = false; - } - - return status; -} - -static const struct dev_pm_ops ath6kl_hifdev_pmops = { - .suspend = ath6kl_hifdev_suspend, - .resume = ath6kl_hifdev_resume, -}; -#endif /* CONFIG_PM */ - -static struct sdio_driver ath6kl_hifdev_driver = { - .name = "ath6kl_hifdev", - .id_table = ath6kl_hifdev_ids, - .probe = ath6kl_hifdev_probe, - .remove = ath6kl_hifdev_remove, -#if defined(CONFIG_PM) - .drv = { - .pm = &ath6kl_hifdev_pmops, - }, -#endif -}; - -/* make sure we only unregister when registered. */ -static int registered = 0; - -extern u32 onebitmode; -extern u32 busspeedlow; -extern u32 debughif; - -static void ResetAllCards(void); - -#ifdef DEBUG - -ATH_DEBUG_INSTANTIATE_MODULE_VAR(hif, - "hif", - "(Linux MMC) Host Interconnect Framework", - ATH_DEBUG_MASK_DEFAULTS, - 0, - NULL); - -#endif - - -/* ------ Functions ------ */ -int HIFInit(OSDRV_CALLBACKS *callbacks) -{ - int r; - AR_DEBUG_ASSERT(callbacks != NULL); - - A_REGISTER_MODULE_DEBUG_INFO(hif); - - /* store the callback handlers */ - osdrvCallbacks = *callbacks; - - /* Register with bus driver core */ - registered = 1; - - r = sdio_register_driver(&ath6kl_hifdev_driver); - if (r < 0) - return r; - - return 0; -} - -static int -__HIFReadWrite(struct hif_device *device, - u32 address, - u8 *buffer, - u32 length, - u32 request, - void *context) -{ - u8 opcode; - int status = 0; - int ret; - u8 *tbuffer; - bool bounced = false; - - AR_DEBUG_ASSERT(device != NULL); - AR_DEBUG_ASSERT(device->func != NULL); - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: Device: 0x%p, buffer:0x%p (addr:0x%X)\n", - device, buffer, address)); - - do { - if (request & HIF_EXTENDED_IO) { - //AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: Command type: CMD53\n")); - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, - ("AR6000: Invalid command type: 0x%08x\n", request)); - status = A_EINVAL; - break; - } - - if (request & HIF_BLOCK_BASIS) { - /* round to whole block length size */ - length = (length / HIF_MBOX_BLOCK_SIZE) * HIF_MBOX_BLOCK_SIZE; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, - ("AR6000: Block mode (BlockLen: %d)\n", - length)); - } else if (request & HIF_BYTE_BASIS) { - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, - ("AR6000: Byte mode (BlockLen: %d)\n", - length)); - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, - ("AR6000: Invalid data mode: 0x%08x\n", request)); - status = A_EINVAL; - break; - } - -#if 0 - /* useful for checking register accesses */ - if (length & 0x3) { - A_PRINTF(KERN_ALERT"AR6000: HIF (%s) is not a multiple of 4 bytes, addr:0x%X, len:%d\n", - request & HIF_WRITE ? "write":"read", address, length); - } -#endif - - if (request & HIF_WRITE) { - if ((address >= HIF_MBOX_START_ADDR(0)) && - (address <= HIF_MBOX_END_ADDR(3))) - { - - AR_DEBUG_ASSERT(length <= HIF_MBOX_WIDTH); - - /* - * Mailbox write. Adjust the address so that the last byte - * falls on the EOM address. - */ - address += (HIF_MBOX_WIDTH - length); - } - } - - if (request & HIF_FIXED_ADDRESS) { - opcode = CMD53_FIXED_ADDRESS; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: Address mode: Fixed 0x%X\n", address)); - } else if (request & HIF_INCREMENTAL_ADDRESS) { - opcode = CMD53_INCR_ADDRESS; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: Address mode: Incremental 0x%X\n", address)); - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, - ("AR6000: Invalid address mode: 0x%08x\n", request)); - status = A_EINVAL; - break; - } - - if (request & HIF_WRITE) { -#if HIF_USE_DMA_BOUNCE_BUFFER - if (BUFFER_NEEDS_BOUNCE(buffer)) { - AR_DEBUG_ASSERT(device->dma_buffer != NULL); - tbuffer = device->dma_buffer; - /* copy the write data to the dma buffer */ - AR_DEBUG_ASSERT(length <= HIF_DMA_BUFFER_SIZE); - memcpy(tbuffer, buffer, length); - bounced = true; - } else { - tbuffer = buffer; - } -#else - tbuffer = buffer; -#endif - if (opcode == CMD53_FIXED_ADDRESS) { - ret = sdio_writesb(device->func, address, tbuffer, length); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: writesb ret=%d address: 0x%X, len: %d, 0x%X\n", - ret, address, length, *(int *)tbuffer)); - } else { - ret = sdio_memcpy_toio(device->func, address, tbuffer, length); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: writeio ret=%d address: 0x%X, len: %d, 0x%X\n", - ret, address, length, *(int *)tbuffer)); - } - } else if (request & HIF_READ) { -#if HIF_USE_DMA_BOUNCE_BUFFER - if (BUFFER_NEEDS_BOUNCE(buffer)) { - AR_DEBUG_ASSERT(device->dma_buffer != NULL); - AR_DEBUG_ASSERT(length <= HIF_DMA_BUFFER_SIZE); - tbuffer = device->dma_buffer; - bounced = true; - } else { - tbuffer = buffer; - } -#else - tbuffer = buffer; -#endif - if (opcode == CMD53_FIXED_ADDRESS) { - ret = sdio_readsb(device->func, tbuffer, address, length); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: readsb ret=%d address: 0x%X, len: %d, 0x%X\n", - ret, address, length, *(int *)tbuffer)); - } else { - ret = sdio_memcpy_fromio(device->func, tbuffer, address, length); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: readio ret=%d address: 0x%X, len: %d, 0x%X\n", - ret, address, length, *(int *)tbuffer)); - } -#if HIF_USE_DMA_BOUNCE_BUFFER - if (bounced) { - /* copy the read data from the dma buffer */ - memcpy(buffer, tbuffer, length); - } -#endif - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, - ("AR6000: Invalid direction: 0x%08x\n", request)); - status = A_EINVAL; - break; - } - - if (ret) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, - ("AR6000: SDIO bus operation failed! MMC stack returned : %d \n", ret)); - status = A_ERROR; - } - } while (false); - - return status; -} - -void AddToAsyncList(struct hif_device *device, BUS_REQUEST *busrequest) -{ - unsigned long flags; - BUS_REQUEST *async; - BUS_REQUEST *active; - - spin_lock_irqsave(&device->asynclock, flags); - active = device->asyncreq; - if (active == NULL) { - device->asyncreq = busrequest; - device->asyncreq->inusenext = NULL; - } else { - for (async = device->asyncreq; - async != NULL; - async = async->inusenext) { - active = async; - } - active->inusenext = busrequest; - busrequest->inusenext = NULL; - } - spin_unlock_irqrestore(&device->asynclock, flags); -} - - -/* queue a read/write request */ -int -HIFReadWrite(struct hif_device *device, - u32 address, - u8 *buffer, - u32 length, - u32 request, - void *context) -{ - int status = 0; - BUS_REQUEST *busrequest; - - - AR_DEBUG_ASSERT(device != NULL); - AR_DEBUG_ASSERT(device->func != NULL); - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: Device: %p addr:0x%X\n", device,address)); - - do { - if ((request & HIF_ASYNCHRONOUS) || (request & HIF_SYNCHRONOUS)){ - /* serialize all requests through the async thread */ - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: Execution mode: %s\n", - (request & HIF_ASYNCHRONOUS)?"Async":"Synch")); - busrequest = hifAllocateBusRequest(device); - if (busrequest == NULL) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, - ("AR6000: no async bus requests available (%s, addr:0x%X, len:%d) \n", - request & HIF_READ ? "READ":"WRITE", address, length)); - return A_ERROR; - } - busrequest->address = address; - busrequest->buffer = buffer; - busrequest->length = length; - busrequest->request = request; - busrequest->context = context; - - AddToAsyncList(device, busrequest); - - if (request & HIF_SYNCHRONOUS) { - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: queued sync req: 0x%lX\n", (unsigned long)busrequest)); - - /* wait for completion */ - up(&device->sem_async); - if (down_interruptible(&busrequest->sem_req) != 0) { - /* interrupted, exit */ - return A_ERROR; - } else { - int status = busrequest->status; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: sync return freeing 0x%lX: 0x%X\n", - (unsigned long)busrequest, busrequest->status)); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: freeing req: 0x%X\n", (unsigned int)request)); - hifFreeBusRequest(device, busrequest); - return status; - } - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: queued async req: 0x%lX\n", (unsigned long)busrequest)); - up(&device->sem_async); - return A_PENDING; - } - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, - ("AR6000: Invalid execution mode: 0x%08x\n", (unsigned int)request)); - status = A_EINVAL; - break; - } - } while(0); - - return status; -} -/* thread to serialize all requests, both sync and async */ -static int async_task(void *param) - { - struct hif_device *device; - BUS_REQUEST *request; - int status; - unsigned long flags; - - device = (struct hif_device *)param; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: async task\n")); - set_current_state(TASK_INTERRUPTIBLE); - while(!device->async_shutdown) { - /* wait for work */ - if (down_interruptible(&device->sem_async) != 0) { - /* interrupted, exit */ - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: async task interrupted\n")); - break; - } - if (device->async_shutdown) { - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: async task stopping\n")); - break; - } - /* we want to hold the host over multiple cmds if possible, but holding the host blocks card interrupts */ - sdio_claim_host(device->func); - spin_lock_irqsave(&device->asynclock, flags); - /* pull the request to work on */ - while (device->asyncreq != NULL) { - request = device->asyncreq; - if (request->inusenext != NULL) { - device->asyncreq = request->inusenext; - } else { - device->asyncreq = NULL; - } - spin_unlock_irqrestore(&device->asynclock, flags); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: async_task processing req: 0x%lX\n", (unsigned long)request)); - - if (request->pScatterReq != NULL) { - A_ASSERT(device->scatter_enabled); - /* this is a queued scatter request, pass the request to scatter routine which - * executes it synchronously, note, no need to free the request since scatter requests - * are maintained on a separate list */ - status = DoHifReadWriteScatter(device,request); - } else { - /* call HIFReadWrite in sync mode to do the work */ - status = __HIFReadWrite(device, request->address, request->buffer, - request->length, request->request & ~HIF_SYNCHRONOUS, NULL); - if (request->request & HIF_ASYNCHRONOUS) { - void *context = request->context; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: async_task freeing req: 0x%lX\n", (unsigned long)request)); - hifFreeBusRequest(device, request); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: async_task completion routine req: 0x%lX\n", (unsigned long)request)); - device->htcCallbacks.rwCompletionHandler(context, status); - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: async_task upping req: 0x%lX\n", (unsigned long)request)); - request->status = status; - up(&request->sem_req); - } - } - spin_lock_irqsave(&device->asynclock, flags); - } - spin_unlock_irqrestore(&device->asynclock, flags); - sdio_release_host(device->func); - } - - complete_and_exit(&device->async_completion, 0); - return 0; -} - -static s32 IssueSDCommand(struct hif_device *device, u32 opcode, u32 arg, u32 flags, u32 *resp) -{ - struct mmc_command cmd; - s32 err; - struct mmc_host *host; - struct sdio_func *func; - - func = device->func; - host = func->card->host; - - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = opcode; - cmd.arg = arg; - cmd.flags = flags; - err = mmc_wait_for_cmd(host, &cmd, 3); - - if ((!err) && (resp)) { - *resp = cmd.resp[0]; - } - - return err; -} - -int ReinitSDIO(struct hif_device *device) -{ - s32 err; - struct mmc_host *host; - struct mmc_card *card; - struct sdio_func *func; - u8 cmd52_resp; - u32 clock; - - func = device->func; - card = func->card; - host = card->host; - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: +ReinitSDIO \n")); - sdio_claim_host(func); - - do { - if (!device->is_suspend) { - u32 resp; - u16 rca; - u32 i; - int bit = fls(host->ocr_avail) - 1; - /* emulate the mmc_power_up(...) */ - host->ios.vdd = bit; - host->ios.chip_select = MMC_CS_DONTCARE; - host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; - host->ios.power_mode = MMC_POWER_UP; - host->ios.bus_width = MMC_BUS_WIDTH_1; - host->ios.timing = MMC_TIMING_LEGACY; - host->ops->set_ios(host, &host->ios); - /* - * This delay should be sufficient to allow the power supply - * to reach the minimum voltage. - */ - msleep(2); - - host->ios.clock = host->f_min; - host->ios.power_mode = MMC_POWER_ON; - host->ops->set_ios(host, &host->ios); - - /* - * This delay must be at least 74 clock sizes, or 1 ms, or the - * time required to reach a stable voltage. - */ - msleep(2); - - /* Issue CMD0. Goto idle state */ - host->ios.chip_select = MMC_CS_HIGH; - host->ops->set_ios(host, &host->ios); - msleep(1); - err = IssueSDCommand(device, MMC_GO_IDLE_STATE, 0, (MMC_RSP_NONE | MMC_CMD_BC), NULL); - host->ios.chip_select = MMC_CS_DONTCARE; - host->ops->set_ios(host, &host->ios); - msleep(1); - host->use_spi_crc = 0; - - if (err) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: CMD0 failed : %d \n",err)); - break; - } - - if (!host->ocr) { - /* Issue CMD5, arg = 0 */ - err = IssueSDCommand(device, SD_IO_SEND_OP_COND, 0, (MMC_RSP_R4 | MMC_CMD_BCR), &resp); - if (err) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: CMD5 failed : %d \n",err)); - break; - } - host->ocr = resp; - } - - /* Issue CMD5, arg = ocr. Wait till card is ready */ - for (i=0;i<100;i++) { - err = IssueSDCommand(device, SD_IO_SEND_OP_COND, host->ocr, (MMC_RSP_R4 | MMC_CMD_BCR), &resp); - if (err) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: CMD5 failed : %d \n",err)); - break; - } - if (resp & MMC_CARD_BUSY) { - break; - } - msleep(10); - } - - if ((i == 100) || (err)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: card in not ready : %d %d \n",i,err)); - break; - } - - /* Issue CMD3, get RCA */ - err = IssueSDCommand(device, SD_SEND_RELATIVE_ADDR, 0, MMC_RSP_R6 | MMC_CMD_BCR, &resp); - if (err) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: CMD3 failed : %d \n",err)); - break; - } - rca = resp >> 16; - host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; - host->ops->set_ios(host, &host->ios); - - /* Issue CMD7, select card */ - err = IssueSDCommand(device, MMC_SELECT_CARD, (rca << 16), MMC_RSP_R1 | MMC_CMD_AC, NULL); - if (err) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: CMD7 failed : %d \n",err)); - break; - } - } - - /* Enable high speed */ - if (card->host->caps & MMC_CAP_SD_HIGHSPEED) { - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("ReinitSDIO: Set high speed mode\n")); - err = Func0_CMD52ReadByte(card, SDIO_CCCR_SPEED, &cmd52_resp); - if (err) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: CMD52 read to CCCR speed register failed : %d \n",err)); - card->state &= ~MMC_STATE_HIGHSPEED; - /* no need to break */ - } else { - err = Func0_CMD52WriteByte(card, SDIO_CCCR_SPEED, (cmd52_resp | SDIO_SPEED_EHS)); - if (err) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: CMD52 write to CCCR speed register failed : %d \n",err)); - break; - } - mmc_card_set_highspeed(card); - host->ios.timing = MMC_TIMING_SD_HS; - host->ops->set_ios(host, &host->ios); - } - } - - /* Set clock */ - if (mmc_card_highspeed(card)) { - clock = 50000000; - } else { - clock = card->cis.max_dtr; - } - - if (clock > host->f_max) { - clock = host->f_max; - } - host->ios.clock = clock; - host->ops->set_ios(host, &host->ios); - - - if (card->host->caps & MMC_CAP_4_BIT_DATA) { - /* CMD52: Set bus width & disable card detect resistor */ - err = Func0_CMD52WriteByte(card, SDIO_CCCR_IF, SDIO_BUS_CD_DISABLE | SDIO_BUS_WIDTH_4BIT); - if (err) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("ReinitSDIO: CMD52 to set bus mode failed : %d \n",err)); - break; - } - host->ios.bus_width = MMC_BUS_WIDTH_4; - host->ops->set_ios(host, &host->ios); - } - } while (0); - - sdio_release_host(func); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: -ReinitSDIO \n")); - - return (err) ? A_ERROR : 0; -} - -int -PowerStateChangeNotify(struct hif_device *device, HIF_DEVICE_POWER_CHANGE_TYPE config) -{ - int status = 0; -#if defined(CONFIG_PM) - struct sdio_func *func = device->func; - int old_reset_val; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: +PowerStateChangeNotify %d\n", config)); - switch (config) { - case HIF_DEVICE_POWER_DOWN: - case HIF_DEVICE_POWER_CUT: - old_reset_val = reset_sdio_on_unload; - reset_sdio_on_unload = 1; - status = hifDisableFunc(device, func); - reset_sdio_on_unload = old_reset_val; - if (!device->is_suspend) { - struct mmc_host *host = func->card->host; - host->ios.clock = 0; - host->ios.vdd = 0; - host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; - host->ios.chip_select = MMC_CS_DONTCARE; - host->ios.power_mode = MMC_POWER_OFF; - host->ios.bus_width = MMC_BUS_WIDTH_1; - host->ios.timing = MMC_TIMING_LEGACY; - host->ops->set_ios(host, &host->ios); - } - break; - case HIF_DEVICE_POWER_UP: - if (device->powerConfig == HIF_DEVICE_POWER_CUT) { - status = ReinitSDIO(device); - } - if (status == 0) { - status = hifEnableFunc(device, func); - } - break; - } - device->powerConfig = config; - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: -PowerStateChangeNotify\n")); -#endif - return status; -} - -int -HIFConfigureDevice(struct hif_device *device, HIF_DEVICE_CONFIG_OPCODE opcode, - void *config, u32 configLen) -{ - u32 count; - int status = 0; - - switch(opcode) { - case HIF_DEVICE_GET_MBOX_BLOCK_SIZE: - ((u32 *)config)[0] = HIF_MBOX0_BLOCK_SIZE; - ((u32 *)config)[1] = HIF_MBOX1_BLOCK_SIZE; - ((u32 *)config)[2] = HIF_MBOX2_BLOCK_SIZE; - ((u32 *)config)[3] = HIF_MBOX3_BLOCK_SIZE; - break; - - case HIF_DEVICE_GET_MBOX_ADDR: - for (count = 0; count < 4; count ++) { - ((u32 *)config)[count] = HIF_MBOX_START_ADDR(count); - } - - if (configLen >= sizeof(struct hif_device_mbox_info)) { - SetExtendedMboxWindowInfo((u16)device->func->device, - (struct hif_device_mbox_info *)config); - } - - break; - case HIF_DEVICE_GET_IRQ_PROC_MODE: - *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = HIF_DEVICE_IRQ_SYNC_ONLY; - break; - case HIF_CONFIGURE_QUERY_SCATTER_REQUEST_SUPPORT: - if (!device->scatter_enabled) { - return A_ENOTSUP; - } - status = SetupHIFScatterSupport(device, (struct hif_device_scatter_support_info *)config); - if (status) { - device->scatter_enabled = false; - } - break; - case HIF_DEVICE_GET_OS_DEVICE: - /* pass back a pointer to the SDIO function's "dev" struct */ - ((struct hif_device_os_device_info *)config)->pOSDevice = &device->func->dev; - break; - case HIF_DEVICE_POWER_STATE_CHANGE: - status = PowerStateChangeNotify(device, *(HIF_DEVICE_POWER_CHANGE_TYPE *)config); - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, - ("AR6000: Unsupported configuration opcode: %d\n", opcode)); - status = A_ERROR; - } - - return status; -} - -void -HIFShutDownDevice(struct hif_device *device) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: +HIFShutDownDevice\n")); - if (device != NULL) { - AR_DEBUG_ASSERT(device->func != NULL); - } else { - /* since we are unloading the driver anyways, reset all cards in case the SDIO card - * is externally powered and we are unloading the SDIO stack. This avoids the problem when - * the SDIO stack is reloaded and attempts are made to re-enumerate a card that is already - * enumerated */ - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: HIFShutDownDevice, resetting\n")); - ResetAllCards(); - - /* Unregister with bus driver core */ - if (registered) { - registered = 0; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, - ("AR6000: Unregistering with the bus driver\n")); - sdio_unregister_driver(&ath6kl_hifdev_driver); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, - ("AR6000: Unregistered\n")); - } - } - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: -HIFShutDownDevice\n")); -} - -static void -hifIRQHandler(struct sdio_func *func) -{ - int status; - struct hif_device *device; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: +hifIRQHandler\n")); - - device = ath6kl_get_hifdev(func); - atomic_set(&device->irqHandling, 1); - /* release the host during ints so we can pick it back up when we process cmds */ - sdio_release_host(device->func); - status = device->htcCallbacks.dsrHandler(device->htcCallbacks.context); - sdio_claim_host(device->func); - atomic_set(&device->irqHandling, 0); - AR_DEBUG_ASSERT(status == 0 || status == A_ECANCELED); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: -hifIRQHandler\n")); -} - -/* handle HTC startup via thread*/ -static int startup_task(void *param) -{ - struct hif_device *device; - - device = (struct hif_device *)param; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: call HTC from startup_task\n")); - /* start up inform DRV layer */ - if ((osdrvCallbacks.deviceInsertedHandler(osdrvCallbacks.context,device)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: Device rejected\n")); - } - return 0; -} - -#if defined(CONFIG_PM) -static int enable_task(void *param) -{ - struct hif_device *device; - device = (struct hif_device *)param; - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: call from resume_task\n")); - - /* start up inform DRV layer */ - if (device && - device->claimedContext && - osdrvCallbacks.devicePowerChangeHandler && - osdrvCallbacks.devicePowerChangeHandler(device->claimedContext, HIF_DEVICE_POWER_UP) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: Device rejected\n")); - } - - return 0; -} -#endif - -void -HIFAckInterrupt(struct hif_device *device) -{ - AR_DEBUG_ASSERT(device != NULL); - - /* Acknowledge our function IRQ */ -} - -void -HIFUnMaskInterrupt(struct hif_device *device) -{ - int ret; - - AR_DEBUG_ASSERT(device != NULL); - AR_DEBUG_ASSERT(device->func != NULL); - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: HIFUnMaskInterrupt\n")); - - /* Register the IRQ Handler */ - sdio_claim_host(device->func); - ret = sdio_claim_irq(device->func, hifIRQHandler); - sdio_release_host(device->func); - AR_DEBUG_ASSERT(ret == 0); -} - -void HIFMaskInterrupt(struct hif_device *device) -{ - int ret; - AR_DEBUG_ASSERT(device != NULL); - AR_DEBUG_ASSERT(device->func != NULL); - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: HIFMaskInterrupt\n")); - - /* Mask our function IRQ */ - sdio_claim_host(device->func); - while (atomic_read(&device->irqHandling)) { - sdio_release_host(device->func); - schedule_timeout(HZ/10); - sdio_claim_host(device->func); - } - ret = sdio_release_irq(device->func); - sdio_release_host(device->func); - AR_DEBUG_ASSERT(ret == 0); -} - -BUS_REQUEST *hifAllocateBusRequest(struct hif_device *device) -{ - BUS_REQUEST *busrequest; - unsigned long flag; - - /* Acquire lock */ - spin_lock_irqsave(&device->lock, flag); - - /* Remove first in list */ - if((busrequest = device->s_busRequestFreeQueue) != NULL) - { - device->s_busRequestFreeQueue = busrequest->next; - } - /* Release lock */ - spin_unlock_irqrestore(&device->lock, flag); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: hifAllocateBusRequest: 0x%p\n", busrequest)); - return busrequest; -} - -void -hifFreeBusRequest(struct hif_device *device, BUS_REQUEST *busrequest) -{ - unsigned long flag; - - AR_DEBUG_ASSERT(busrequest != NULL); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: hifFreeBusRequest: 0x%p\n", busrequest)); - /* Acquire lock */ - spin_lock_irqsave(&device->lock, flag); - - - /* Insert first in list */ - busrequest->next = device->s_busRequestFreeQueue; - busrequest->inusenext = NULL; - device->s_busRequestFreeQueue = busrequest; - - /* Release lock */ - spin_unlock_irqrestore(&device->lock, flag); -} - -static int hifDisableFunc(struct hif_device *device, struct sdio_func *func) -{ - int ret; - int status = 0; - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: +hifDisableFunc\n")); - device = ath6kl_get_hifdev(func); - if (!IS_ERR(device->async_task)) { - init_completion(&device->async_completion); - device->async_shutdown = 1; - up(&device->sem_async); - wait_for_completion(&device->async_completion); - device->async_task = NULL; - } - /* Disable the card */ - sdio_claim_host(device->func); - ret = sdio_disable_func(device->func); - if (ret) { - status = A_ERROR; - } - - if (reset_sdio_on_unload) { - /* reset the SDIO interface. This is useful in automated testing where the card - * does not need to be removed at the end of the test. It is expected that the user will - * also unload/reload the host controller driver to force the bus driver to re-enumerate the slot */ - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, ("AR6000: reseting SDIO card back to uninitialized state \n")); - - /* NOTE : sdio_f0_writeb() cannot be used here, that API only allows access - * to undefined registers in the range of: 0xF0-0xFF */ - - ret = Func0_CMD52WriteByte(device->func->card, SDIO_CCCR_ABORT, (1 << 3)); - if (ret) { - status = A_ERROR; - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("AR6000: reset failed : %d \n",ret)); - } - } - - sdio_release_host(device->func); - - if (status == 0) { - device->is_disabled = true; - } - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: -hifDisableFunc\n")); - - return status; -} - -static int hifEnableFunc(struct hif_device *device, struct sdio_func *func) -{ - struct task_struct* pTask; - const char *taskName = NULL; - int (*taskFunc)(void *) = NULL; - int ret = 0; - - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: +hifEnableFunc\n")); - device = ath6kl_get_hifdev(func); - - if (device->is_disabled) { - /* enable the SDIO function */ - sdio_claim_host(func); - - if ((device->id->device & MANUFACTURER_ID_AR6K_BASE_MASK) >= MANUFACTURER_ID_AR6003_BASE) { - /* enable 4-bit ASYNC interrupt on AR6003 or later devices */ - ret = Func0_CMD52WriteByte(func->card, CCCR_SDIO_IRQ_MODE_REG, SDIO_IRQ_MODE_ASYNC_4BIT_IRQ); - if (ret) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("AR6000: failed to enable 4-bit ASYNC IRQ mode %d \n",ret)); - sdio_release_host(func); - return ret; - } - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: 4-bit ASYNC IRQ mode enabled\n")); - } - /* give us some time to enable, in ms */ - func->enable_timeout = 100; - ret = sdio_enable_func(func); - if (ret) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("AR6000: %s(), Unable to enable AR6K: 0x%X\n", - __FUNCTION__, ret)); - sdio_release_host(func); - return ret; - } - ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE); - sdio_release_host(func); - if (ret) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("AR6000: %s(), Unable to set block size 0x%x AR6K: 0x%X\n", - __FUNCTION__, HIF_MBOX_BLOCK_SIZE, ret)); - return ret; - } - device->is_disabled = false; - /* create async I/O thread */ - if (!device->async_task) { - device->async_shutdown = 0; - device->async_task = kthread_create(async_task, - (void *)device, - "AR6K Async"); - if (IS_ERR(device->async_task)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("AR6000: %s(), to create async task\n", __FUNCTION__)); - return -ENOMEM; - } - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: start async task\n")); - wake_up_process(device->async_task ); - } - } - - if (!device->claimedContext) { - taskFunc = startup_task; - taskName = "AR6K startup"; - ret = 0; -#if defined(CONFIG_PM) - } else { - taskFunc = enable_task; - taskName = "AR6K enable"; - ret = -ENOMEM; -#endif /* CONFIG_PM */ - } - /* create resume thread */ - pTask = kthread_create(taskFunc, (void *)device, taskName); - if (IS_ERR(pTask)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("AR6000: %s(), to create enabel task\n", __FUNCTION__)); - return -ENOMEM; - } - wake_up_process(pTask); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: -hifEnableFunc\n")); - - /* task will call the enable func, indicate pending */ - return ret; -} - -/* - * This should be moved to AR6K HTC layer. - */ -int hifWaitForPendingRecv(struct hif_device *device) -{ - s32 cnt = 10; - u8 host_int_status; - int status = 0; - - do { - while (atomic_read(&device->irqHandling)) { - /* wait until irq handler finished all the jobs */ - schedule_timeout(HZ/10); - } - /* check if there is any pending irq due to force done */ - host_int_status = 0; - status = HIFReadWrite(device, HOST_INT_STATUS_ADDRESS, - (u8 *)&host_int_status, sizeof(host_int_status), - HIF_RD_SYNC_BYTE_INC, NULL); - host_int_status = !status ? (host_int_status & (1 << 0)) : 0; - if (host_int_status) { - schedule(); /* schedule for next dsrHandler */ - } - } while (host_int_status && --cnt > 0); - - if (host_int_status && cnt == 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, - ("AR6000: %s(), Unable clear up pending IRQ before the system suspended\n", __FUNCTION__)); - } - - return 0; -} - -static void -delHifDevice(struct hif_device * device) -{ - AR_DEBUG_ASSERT(device!= NULL); - AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: delHifDevice; 0x%p\n", device)); - kfree(device->dma_buffer); - kfree(device); -} - -static void ResetAllCards(void) -{ -} - -void HIFClaimDevice(struct hif_device *device, void *context) -{ - device->claimedContext = context; -} - -void HIFReleaseDevice(struct hif_device *device) -{ - device->claimedContext = NULL; -} - -int HIFAttachHTC(struct hif_device *device, HTC_CALLBACKS *callbacks) -{ - if (device->htcCallbacks.context != NULL) { - /* already in use! */ - return A_ERROR; - } - device->htcCallbacks = *callbacks; - return 0; -} - -void HIFDetachHTC(struct hif_device *device) -{ - A_MEMZERO(&device->htcCallbacks,sizeof(device->htcCallbacks)); -} - -#define SDIO_SET_CMD52_ARG(arg,rw,func,raw,address,writedata) \ - (arg) = (((rw) & 1) << 31) | \ - (((func) & 0x7) << 28) | \ - (((raw) & 1) << 27) | \ - (1 << 26) | \ - (((address) & 0x1FFFF) << 9) | \ - (1 << 8) | \ - ((writedata) & 0xFF) - -#define SDIO_SET_CMD52_READ_ARG(arg,func,address) \ - SDIO_SET_CMD52_ARG(arg,0,(func),0,address,0x00) -#define SDIO_SET_CMD52_WRITE_ARG(arg,func,address,value) \ - SDIO_SET_CMD52_ARG(arg,1,(func),0,address,value) - -static int Func0_CMD52WriteByte(struct mmc_card *card, unsigned int address, unsigned char byte) -{ - struct mmc_command ioCmd; - unsigned long arg; - - memset(&ioCmd,0,sizeof(ioCmd)); - SDIO_SET_CMD52_WRITE_ARG(arg,0,address,byte); - ioCmd.opcode = SD_IO_RW_DIRECT; - ioCmd.arg = arg; - ioCmd.flags = MMC_RSP_R5 | MMC_CMD_AC; - - return mmc_wait_for_cmd(card->host, &ioCmd, 0); -} - -static int Func0_CMD52ReadByte(struct mmc_card *card, unsigned int address, unsigned char *byte) -{ - struct mmc_command ioCmd; - unsigned long arg; - s32 err; - - memset(&ioCmd,0,sizeof(ioCmd)); - SDIO_SET_CMD52_READ_ARG(arg,0,address); - ioCmd.opcode = SD_IO_RW_DIRECT; - ioCmd.arg = arg; - ioCmd.flags = MMC_RSP_R5 | MMC_CMD_AC; - - err = mmc_wait_for_cmd(card->host, &ioCmd, 0); - - if ((!err) && (byte)) { - *byte = ioCmd.resp[0] & 0xFF; - } - - return err; -} |