diff options
Diffstat (limited to 'drivers/ssb/driver_pcicore.c')
| -rw-r--r-- | drivers/ssb/driver_pcicore.c | 172 |
1 files changed, 92 insertions, 80 deletions
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 5d777f2..75def13 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -60,77 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock); /* Core to access the external PCI config space. Can only have one. */ static struct ssb_pcicore *extpci_core; -static u32 ssb_pcicore_pcibus_iobase = 0x100; -static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; - -int pcibios_plat_dev_init(struct pci_dev *d) -{ - struct resource *res; - int pos, size; - u32 *base; - - ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", - pci_name(d)); - - /* Fix up resource bases */ - for (pos = 0; pos < 6; pos++) { - res = &d->resource[pos]; - if (res->flags & IORESOURCE_IO) - base = &ssb_pcicore_pcibus_iobase; - else - base = &ssb_pcicore_pcibus_membase; - res->flags |= IORESOURCE_PCI_FIXED; - if (res->end) { - size = res->end - res->start + 1; - if (*base & (size - 1)) - *base = (*base + size) & ~(size - 1); - res->start = *base; - res->end = res->start + size - 1; - *base += size; - pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); - } - /* Fix up PCI bridge BAR0 only */ - if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) - break; - } - /* Fix up interrupt lines */ - d->irq = ssb_mips_irq(extpci_core->dev) + 2; - pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); - - return 0; -} - -static void __init ssb_fixup_pcibridge(struct pci_dev *dev) -{ - u8 lat; - - if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) - return; - - ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); - - /* Enable PCI bridge bus mastering and memory space */ - pci_set_master(dev); - if (pcibios_enable_device(dev, ~0) < 0) { - ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); - return; - } - - /* Enable PCI bridge BAR1 prefetch and burst */ - pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); - - /* Make sure our latency is high enough to handle the devices behind us */ - lat = 168; - ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} -DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge); - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return ssb_mips_irq(extpci_core->dev) + 2; -} static u32 get_cfgspace_addr(struct ssb_pcicore *pc, unsigned int bus, unsigned int dev, @@ -320,6 +249,95 @@ static struct pci_controller ssb_pcicore_controller = { .mem_offset = 0x24000000, }; +static u32 ssb_pcicore_pcibus_iobase = 0x100; +static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; + +/* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. */ +int ssb_pcicore_plat_dev_init(struct pci_dev *d) +{ + struct resource *res; + int pos, size; + u32 *base; + + if (d->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + + ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", + pci_name(d)); + + /* Fix up resource bases */ + for (pos = 0; pos < 6; pos++) { + res = &d->resource[pos]; + if (res->flags & IORESOURCE_IO) + base = &ssb_pcicore_pcibus_iobase; + else + base = &ssb_pcicore_pcibus_membase; + res->flags |= IORESOURCE_PCI_FIXED; + if (res->end) { + size = res->end - res->start + 1; + if (*base & (size - 1)) + *base = (*base + size) & ~(size - 1); + res->start = *base; + res->end = res->start + size - 1; + *base += size; + pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); + } + /* Fix up PCI bridge BAR0 only */ + if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) + break; + } + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); + + return 0; +} + +/* Early PCI fixup for a device on the PCI-core bridge. */ +static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev) +{ + u8 lat; + + if (dev->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) + return; + + ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + if (pcibios_enable_device(dev, ~0) < 0) { + ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); + return; + } + + /* Enable PCI bridge BAR1 prefetch and burst */ + pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); + + /* Make sure our latency is high enough to handle the devices behind us */ + lat = 168; + ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); + +/* PCI device IRQ mapping. */ +int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (dev->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + return ssb_mips_irq(extpci_core->dev) + 2; +} + static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) { u32 val; @@ -544,15 +562,9 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, u32 intvec; intvec = ssb_read32(pdev, SSB_INTVEC); - if ((bus->chip_id & 0xFF00) == 0x4400) { - /* Workaround: On the BCM44XX the BPFLAG routing - * bit is wrong. Use a hardcoded constant. */ - intvec |= 0x00000002; - } else { - tmp = ssb_read32(dev, SSB_TPSFLAG); - tmp &= SSB_TPSFLAG_BPFLAG; - intvec |= (1 << tmp); - } + tmp = ssb_read32(dev, SSB_TPSFLAG); + tmp &= SSB_TPSFLAG_BPFLAG; + intvec |= (1 << tmp); ssb_write32(pdev, SSB_INTVEC, intvec); } |
