summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-atmel.c12
-rw-r--r--drivers/spi/spi-dw-mid.c6
-rw-r--r--drivers/spi/spi-dw-pci.c4
-rw-r--r--drivers/spi/spi-dw.c4
-rw-r--r--drivers/spi/spi-pl022.c2
-rw-r--r--drivers/spi/spi-ti-qspi.c22
6 files changed, 39 insertions, 11 deletions
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 9af7841..06de340 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -764,17 +764,17 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
(unsigned long long)xfer->rx_dma);
}
- /* REVISIT: We're waiting for ENDRX before we start the next
+ /* REVISIT: We're waiting for RXBUFF before we start the next
* transfer because we need to handle some difficult timing
- * issues otherwise. If we wait for ENDTX in one transfer and
- * then starts waiting for ENDRX in the next, it's difficult
- * to tell the difference between the ENDRX interrupt we're
- * actually waiting for and the ENDRX interrupt of the
+ * issues otherwise. If we wait for TXBUFE in one transfer and
+ * then starts waiting for RXBUFF in the next, it's difficult
+ * to tell the difference between the RXBUFF interrupt we're
+ * actually waiting for and the RXBUFF interrupt of the
* previous transfer.
*
* It should be doable, though. Just not now...
*/
- spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+ spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
}
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index a0197fd..3ce39d1 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -139,6 +139,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
1,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc)
+ return NULL;
+
txdesc->callback = dw_spi_dma_tx_done;
txdesc->callback_param = dws;
@@ -184,6 +187,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
1,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!rxdesc)
+ return NULL;
+
rxdesc->callback = dw_spi_dma_rx_done;
rxdesc->callback_param = dws;
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index 5ba3310..6d331e0 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -36,13 +36,13 @@ struct spi_pci_desc {
static struct spi_pci_desc spi_pci_mid_desc_1 = {
.setup = dw_spi_mid_init,
- .num_cs = 32,
+ .num_cs = 5,
.bus_num = 0,
};
static struct spi_pci_desc spi_pci_mid_desc_2 = {
.setup = dw_spi_mid_init,
- .num_cs = 4,
+ .num_cs = 2,
.bus_num = 1,
};
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 5a97a62..4847afb 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -621,14 +621,14 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
if (!dws->fifo_len) {
u32 fifo;
- for (fifo = 2; fifo <= 256; fifo++) {
+ for (fifo = 1; fifo < 256; fifo++) {
dw_writew(dws, DW_SPI_TXFLTR, fifo);
if (fifo != dw_readw(dws, DW_SPI_TXFLTR))
break;
}
dw_writew(dws, DW_SPI_TXFLTR, 0);
- dws->fifo_len = (fifo == 2) ? 0 : fifo - 1;
+ dws->fifo_len = (fifo == 1) ? 0 : fifo;
dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
}
}
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 89ca162..ee513a8 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -534,12 +534,12 @@ static void giveback(struct pl022 *pl022)
pl022->cur_msg = NULL;
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
- spi_finalize_current_message(pl022->master);
/* disable the SPI/SSP operation */
writew((readw(SSP_CR1(pl022->virtbase)) &
(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+ spi_finalize_current_message(pl022->master);
}
/**
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 884a716..5c06168 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -101,6 +101,7 @@ struct ti_qspi {
#define QSPI_FLEN(n) ((n - 1) << 0)
/* STATUS REGISTER */
+#define BUSY 0x01
#define WC 0x02
/* INTERRUPT REGISTER */
@@ -199,6 +200,21 @@ static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG);
}
+static inline u32 qspi_is_busy(struct ti_qspi *qspi)
+{
+ u32 stat;
+ unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
+
+ stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+ while ((stat & BUSY) && time_after(timeout, jiffies)) {
+ cpu_relax();
+ stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+ }
+
+ WARN(stat & BUSY, "qspi busy\n");
+ return stat & BUSY;
+}
+
static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
{
int wlen, count;
@@ -211,6 +227,9 @@ static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
wlen = t->bits_per_word >> 3; /* in bytes */
while (count) {
+ if (qspi_is_busy(qspi))
+ return -EBUSY;
+
switch (wlen) {
case 1:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
@@ -266,6 +285,9 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t)
while (count) {
dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
+ if (qspi_is_busy(qspi))
+ return -EBUSY;
+
ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
if (!wait_for_completion_timeout(&qspi->transfer_complete,
QSPI_COMPLETION_TIMEOUT)) {
OpenPOWER on IntegriCloud