diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-atmel.c | 24 | ||||
| -rw-r--r-- | drivers/spi/spi-bcm63xx-hsspi.c | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-dspi.c | 3 |
4 files changed, 27 insertions, 2 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e6d9e32..82cd818 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -457,6 +457,7 @@ config SPI_OMAP24XX config SPI_TI_QSPI tristate "DRA7xxx QSPI controller support" + depends on HAS_DMA depends on ARCH_OMAP2PLUS || COMPILE_TEST help QSPI master controller for DRA7xxx used for flash devices. diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 1eb83c9..78c885d 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -269,6 +269,7 @@ struct atmel_spi_caps { bool is_spi2; bool has_wdrbt; bool has_dma_support; + bool has_pdc_support; }; /* @@ -1426,7 +1427,28 @@ static void atmel_get_caps(struct atmel_spi *as) as->caps.is_spi2 = version > 0x121; as->caps.has_wdrbt = version >= 0x210; +#ifdef CONFIG_SOC_SAM_V4_V5 + /* + * Atmel SoCs based on ARM9 (SAM9x) cores should not use spi_map_buf() + * since this later function tries to map buffers with dma_map_sg() + * even if they have not been allocated inside DMA-safe areas. + * On SoCs based on Cortex A5 (SAMA5Dx), it works anyway because for + * those ARM cores, the data cache follows the PIPT model. + * Also the L2 cache controller of SAMA5D2 uses the PIPT model too. + * In case of PIPT caches, there cannot be cache aliases. + * However on ARM9 cores, the data cache follows the VIVT model, hence + * the cache aliases issue can occur when buffers are allocated from + * DMA-unsafe areas, by vmalloc() for instance, where cache coherency is + * not taken into account or at least not handled completely (cache + * lines of aliases are not invalidated). + * This is not a theorical issue: it was reproduced when trying to mount + * a UBI file-system on a at91sam9g35ek board. + */ + as->caps.has_dma_support = false; +#else as->caps.has_dma_support = version >= 0x212; +#endif + as->caps.has_pdc_support = version < 0x212; } /*-------------------------------------------------------------------------*/ @@ -1567,7 +1589,7 @@ static int atmel_spi_probe(struct platform_device *pdev) } else if (ret == -EPROBE_DEFER) { return ret; } - } else { + } else if (as->caps.has_pdc_support) { as->use_pdc = true; } diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c index 5514cd0..4da2d4a 100644 --- a/drivers/spi/spi-bcm63xx-hsspi.c +++ b/drivers/spi/spi-bcm63xx-hsspi.c @@ -484,6 +484,7 @@ static const struct of_device_id bcm63xx_hsspi_of_match[] = { { .compatible = "brcm,bcm6328-hsspi", }, { }, }; +MODULE_DEVICE_TABLE(of, bcm63xx_hsspi_of_match); static struct platform_driver bcm63xx_hsspi_driver = { .driver = { diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 1520164..d89127f 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1032,7 +1032,8 @@ static int dspi_probe(struct platform_device *pdev) goto out_master_put; if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { - if (dspi_request_dma(dspi, res->start)) { + ret = dspi_request_dma(dspi, res->start); + if (ret < 0) { dev_err(&pdev->dev, "can't get dma channels\n"); goto out_clk_put; } |
