diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi-imx.c | 21 |
1 files changed, 18 insertions, 3 deletions
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index deb782f..08124b2 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -442,6 +442,7 @@ static void mx51_ecspi_reset(struct spi_imx_data *spi_imx) #define MX31_CSPICTRL_ENABLE (1 << 0) #define MX31_CSPICTRL_MASTER (1 << 1) #define MX31_CSPICTRL_XCH (1 << 2) +#define MX31_CSPICTRL_SMC (1 << 3) #define MX31_CSPICTRL_POL (1 << 4) #define MX31_CSPICTRL_PHA (1 << 5) #define MX31_CSPICTRL_SSCTL (1 << 6) @@ -452,6 +453,10 @@ static void mx51_ecspi_reset(struct spi_imx_data *spi_imx) #define MX35_CSPICTRL_CS_SHIFT 12 #define MX31_CSPICTRL_DR_SHIFT 16 +#define MX31_CSPI_DMAREG 0x10 +#define MX31_DMAREG_RH_DEN (1<<4) +#define MX31_DMAREG_TH_DEN (1<<1) + #define MX31_CSPISTATUS 0x14 #define MX31_STATUS_RR (1 << 3) @@ -511,6 +516,9 @@ static int mx31_config(struct spi_device *spi, struct spi_imx_config *config) (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT : MX31_CSPICTRL_CS_SHIFT); + if (spi_imx->usedma) + reg |= MX31_CSPICTRL_SMC; + writel(reg, spi_imx->base + MXC_CSPICTRL); reg = readl(spi_imx->base + MX31_CSPI_TESTREG); @@ -520,6 +528,13 @@ static int mx31_config(struct spi_device *spi, struct spi_imx_config *config) reg &= ~MX31_TEST_LBC; writel(reg, spi_imx->base + MX31_CSPI_TESTREG); + if (spi_imx->usedma) { + /* configure DMA requests when RXFIFO is half full and + when TXFIFO is half empty */ + writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN, + spi_imx->base + MX31_CSPI_DMAREG); + } + return 0; } @@ -1244,10 +1259,10 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per); /* - * Only validated on i.mx6 now, can remove the constrain if validated on - * other chips. + * Only validated on i.mx35 and i.mx6 now, can remove the constraint + * if validated on other chips. */ - if (is_imx51_ecspi(spi_imx)) { + if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx)) { ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master); if (ret == -EPROBE_DEFER) goto out_clk_put; |
