diff options
Diffstat (limited to 'drivers/spi/spi-xilinx.c')
| -rw-r--r-- | drivers/spi/spi-xilinx.c | 556 |
1 files changed, 556 insertions, 0 deletions
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c new file mode 100644 index 0000000..4d2c75d --- /dev/null +++ b/drivers/spi/spi-xilinx.c @@ -0,0 +1,556 @@ +/* + * Xilinx SPI controller driver (master mode only) + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright (c) 2010 Secret Lab Technologies, Ltd. + * Copyright (c) 2009 Intel Corporation + * 2002-2007 (c) MontaVista Software, Inc. + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> +#include <linux/spi/xilinx_spi.h> +#include <linux/io.h> + +#define XILINX_SPI_NAME "xilinx_spi" + +/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e) + * Product Specification", DS464 + */ +#define XSPI_CR_OFFSET 0x60 /* Control Register */ + +#define XSPI_CR_ENABLE 0x02 +#define XSPI_CR_MASTER_MODE 0x04 +#define XSPI_CR_CPOL 0x08 +#define XSPI_CR_CPHA 0x10 +#define XSPI_CR_MODE_MASK (XSPI_CR_CPHA | XSPI_CR_CPOL) +#define XSPI_CR_TXFIFO_RESET 0x20 +#define XSPI_CR_RXFIFO_RESET 0x40 +#define XSPI_CR_MANUAL_SSELECT 0x80 +#define XSPI_CR_TRANS_INHIBIT 0x100 +#define XSPI_CR_LSB_FIRST 0x200 + +#define XSPI_SR_OFFSET 0x64 /* Status Register */ + +#define XSPI_SR_RX_EMPTY_MASK 0x01 /* Receive FIFO is empty */ +#define XSPI_SR_RX_FULL_MASK 0x02 /* Receive FIFO is full */ +#define XSPI_SR_TX_EMPTY_MASK 0x04 /* Transmit FIFO is empty */ +#define XSPI_SR_TX_FULL_MASK 0x08 /* Transmit FIFO is full */ +#define XSPI_SR_MODE_FAULT_MASK 0x10 /* Mode fault error */ + +#define XSPI_TXD_OFFSET 0x68 /* Data Transmit Register */ +#define XSPI_RXD_OFFSET 0x6c /* Data Receive Register */ + +#define XSPI_SSR_OFFSET 0x70 /* 32-bit Slave Select Register */ + +/* Register definitions as per "OPB IPIF (v3.01c) Product Specification", DS414 + * IPIF registers are 32 bit + */ +#define XIPIF_V123B_DGIER_OFFSET 0x1c /* IPIF global int enable reg */ +#define XIPIF_V123B_GINTR_ENABLE 0x80000000 + +#define XIPIF_V123B_IISR_OFFSET 0x20 /* IPIF interrupt status reg */ +#define XIPIF_V123B_IIER_OFFSET 0x28 /* IPIF interrupt enable reg */ + +#define XSPI_INTR_MODE_FAULT 0x01 /* Mode fault error */ +#define XSPI_INTR_SLAVE_MODE_FAULT 0x02 /* Selected as slave while + * disabled */ +#define XSPI_INTR_TX_EMPTY 0x04 /* TxFIFO is empty */ +#define XSPI_INTR_TX_UNDERRUN 0x08 /* TxFIFO was underrun */ +#define XSPI_INTR_RX_FULL 0x10 /* RxFIFO is full */ +#define XSPI_INTR_RX_OVERRUN 0x20 /* RxFIFO was overrun */ +#define XSPI_INTR_TX_HALF_EMPTY 0x40 /* TxFIFO is half empty */ + +#define XIPIF_V123B_RESETR_OFFSET 0x40 /* IPIF reset register */ +#define XIPIF_V123B_RESET_MASK 0x0a /* the value to write */ + +struct xilinx_spi { + /* bitbang has to be first */ + struct spi_bitbang bitbang; + struct completion done; + struct resource mem; /* phys mem */ + void __iomem *regs; /* virt. address of the control registers */ + + u32 irq; + + u8 *rx_ptr; /* pointer in the Tx buffer */ + const u8 *tx_ptr; /* pointer in the Rx buffer */ + int remaining_bytes; /* the number of bytes left to transfer */ + u8 bits_per_word; + unsigned int (*read_fn) (void __iomem *); + void (*write_fn) (u32, void __iomem *); + void (*tx_fn) (struct xilinx_spi *); + void (*rx_fn) (struct xilinx_spi *); +}; + +static void xspi_write32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static unsigned int xspi_read32(void __iomem *addr) +{ + return ioread32(addr); +} + +static void xspi_write32_be(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static unsigned int xspi_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + +static void xspi_tx8(struct xilinx_spi *xspi) +{ + xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET); + xspi->tx_ptr++; +} + +static void xspi_tx16(struct xilinx_spi *xspi) +{ + xspi->write_fn(*(u16 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET); + xspi->tx_ptr += 2; +} + +static void xspi_tx32(struct xilinx_spi *xspi) +{ + xspi->write_fn(*(u32 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET); + xspi->tx_ptr += 4; +} + +static void xspi_rx8(struct xilinx_spi *xspi) +{ + u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); + if (xspi->rx_ptr) { + *xspi->rx_ptr = data & 0xff; + xspi->rx_ptr++; + } +} + +static void xspi_rx16(struct xilinx_spi *xspi) +{ + u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); + if (xspi->rx_ptr) { + *(u16 *)(xspi->rx_ptr) = data & 0xffff; + xspi->rx_ptr += 2; + } +} + +static void xspi_rx32(struct xilinx_spi *xspi) +{ + u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); + if (xspi->rx_ptr) { + *(u32 *)(xspi->rx_ptr) = data; + xspi->rx_ptr += 4; + } +} + +static void xspi_init_hw(struct xilinx_spi *xspi) +{ + void __iomem *regs_base = xspi->regs; + + /* Reset the SPI device */ + xspi->write_fn(XIPIF_V123B_RESET_MASK, + regs_base + XIPIF_V123B_RESETR_OFFSET); + /* Disable all the interrupts just in case */ + xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET); + /* Enable the global IPIF interrupt */ + xspi->write_fn(XIPIF_V123B_GINTR_ENABLE, + regs_base + XIPIF_V123B_DGIER_OFFSET); + /* Deselect the slave on the SPI bus */ + xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET); + /* Disable the transmitter, enable Manual Slave Select Assertion, + * put SPI controller into master mode, and enable it */ + xspi->write_fn(XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT | + XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE | XSPI_CR_TXFIFO_RESET | + XSPI_CR_RXFIFO_RESET, regs_base + XSPI_CR_OFFSET); +} + +static void xilinx_spi_chipselect(struct spi_device *spi, int is_on) +{ + struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); + + if (is_on == BITBANG_CS_INACTIVE) { + /* Deselect the slave on the SPI bus */ + xspi->write_fn(0xffff, xspi->regs + XSPI_SSR_OFFSET); + } else if (is_on == BITBANG_CS_ACTIVE) { + /* Set the SPI clock phase and polarity */ + u16 cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) + & ~XSPI_CR_MODE_MASK; + if (spi->mode & SPI_CPHA) + cr |= XSPI_CR_CPHA; + if (spi->mode & SPI_CPOL) + cr |= XSPI_CR_CPOL; + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + + /* We do not check spi->max_speed_hz here as the SPI clock + * frequency is not software programmable (the IP block design + * parameter) + */ + + /* Activate the chip select */ + xspi->write_fn(~(0x0001 << spi->chip_select), + xspi->regs + XSPI_SSR_OFFSET); + } +} + +/* spi_bitbang requires custom setup_transfer() to be defined if there is a + * custom txrx_bufs(). We have nothing to setup here as the SPI IP block + * supports 8 or 16 bits per word which cannot be changed in software. + * SPI clock can't be changed in software either. + * Check for correct bits per word. Chip select delay calculations could be + * added here as soon as bitbang_work() can be made aware of the delay value. + */ +static int xilinx_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); + u8 bits_per_word; + + bits_per_word = (t && t->bits_per_word) + ? t->bits_per_word : spi->bits_per_word; + if (bits_per_word != xspi->bits_per_word) { + dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", + __func__, bits_per_word); + return -EINVAL; + } + + return 0; +} + +static int xilinx_spi_setup(struct spi_device *spi) +{ + /* always return 0, we can not check the number of bits. + * There are cases when SPI setup is called before any driver is + * there, in that case the SPI core defaults to 8 bits, which we + * do not support in some cases. But if we return an error, the + * SPI device would not be registered and no driver can get hold of it + * When the driver is there, it will call SPI setup again with the + * correct number of bits per transfer. + * If a driver setups with the wrong bit number, it will fail when + * it tries to do a transfer + */ + return 0; +} + +static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi) +{ + u8 sr; + + /* Fill the Tx FIFO with as many bytes as possible */ + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + while ((sr & XSPI_SR_TX_FULL_MASK) == 0 && xspi->remaining_bytes > 0) { + if (xspi->tx_ptr) + xspi->tx_fn(xspi); + else + xspi->write_fn(0, xspi->regs + XSPI_TXD_OFFSET); + xspi->remaining_bytes -= xspi->bits_per_word / 8; + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + } +} + +static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); + u32 ipif_ier; + u16 cr; + + /* We get here with transmitter inhibited */ + + xspi->tx_ptr = t->tx_buf; + xspi->rx_ptr = t->rx_buf; + xspi->remaining_bytes = t->len; + INIT_COMPLETION(xspi->done); + + xilinx_spi_fill_tx_fifo(xspi); + + /* Enable the transmit empty interrupt, which we use to determine + * progress on the transmission. + */ + ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET); + xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY, + xspi->regs + XIPIF_V123B_IIER_OFFSET); + + /* Start the transfer by not inhibiting the transmitter any longer */ + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & + ~XSPI_CR_TRANS_INHIBIT; + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + + wait_for_completion(&xspi->done); + + /* Disable the transmit empty interrupt */ + xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET); + + return t->len - xspi->remaining_bytes; +} + + +/* This driver supports single master mode only. Hence Tx FIFO Empty + * is the only interrupt we care about. + * Receive FIFO Overrun, Transmit FIFO Underrun, Mode Fault, and Slave Mode + * Fault are not to happen. + */ +static irqreturn_t xilinx_spi_irq(int irq, void *dev_id) +{ + struct xilinx_spi *xspi = dev_id; + u32 ipif_isr; + + /* Get the IPIF interrupts, and clear them immediately */ + ipif_isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET); + xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET); + + if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */ + u16 cr; + u8 sr; + + /* A transmit has just completed. Process received data and + * check for more data to transmit. Always inhibit the + * transmitter while the Isr refills the transmit register/FIFO, + * or make sure it is stopped if we're done. + */ + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET); + xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, + xspi->regs + XSPI_CR_OFFSET); + + /* Read out all the data from the Rx FIFO */ + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) { + xspi->rx_fn(xspi); + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + } + + /* See if there is more data to send */ + if (xspi->remaining_bytes > 0) { + xilinx_spi_fill_tx_fifo(xspi); + /* Start the transfer by not inhibiting the + * transmitter any longer + */ + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + } else { + /* No more data to send. + * Indicate the transfer is completed. + */ + complete(&xspi->done); + } + } + + return IRQ_HANDLED; +} + +static const struct of_device_id xilinx_spi_of_match[] = { + { .compatible = "xlnx,xps-spi-2.00.a", }, + { .compatible = "xlnx,xps-spi-2.00.b", }, + {} +}; +MODULE_DEVICE_TABLE(of, xilinx_spi_of_match); + +struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, + u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word) +{ + struct spi_master *master; + struct xilinx_spi *xspi; + int ret; + + master = spi_alloc_master(dev, sizeof(struct xilinx_spi)); + if (!master) + return NULL; + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA; + + xspi = spi_master_get_devdata(master); + xspi->bitbang.master = spi_master_get(master); + xspi->bitbang.chipselect = xilinx_spi_chipselect; + xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer; + xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs; + xspi->bitbang.master->setup = xilinx_spi_setup; + init_completion(&xspi->done); + + if (!request_mem_region(mem->start, resource_size(mem), + XILINX_SPI_NAME)) + goto put_master; + + xspi->regs = ioremap(mem->start, resource_size(mem)); + if (xspi->regs == NULL) { + dev_warn(dev, "ioremap failure\n"); + goto map_failed; + } + + master->bus_num = bus_num; + master->num_chipselect = num_cs; + master->dev.of_node = dev->of_node; + + xspi->mem = *mem; + xspi->irq = irq; + if (little_endian) { + xspi->read_fn = xspi_read32; + xspi->write_fn = xspi_write32; + } else { + xspi->read_fn = xspi_read32_be; + xspi->write_fn = xspi_write32_be; + } + xspi->bits_per_word = bits_per_word; + if (xspi->bits_per_word == 8) { + xspi->tx_fn = xspi_tx8; + xspi->rx_fn = xspi_rx8; + } else if (xspi->bits_per_word == 16) { + xspi->tx_fn = xspi_tx16; + xspi->rx_fn = xspi_rx16; + } else if (xspi->bits_per_word == 32) { + xspi->tx_fn = xspi_tx32; + xspi->rx_fn = xspi_rx32; + } else + goto unmap_io; + + + /* SPI controller initializations */ + xspi_init_hw(xspi); + + /* Register for SPI Interrupt */ + ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi); + if (ret) + goto unmap_io; + + ret = spi_bitbang_start(&xspi->bitbang); + if (ret) { + dev_err(dev, "spi_bitbang_start FAILED\n"); + goto free_irq; + } + + dev_info(dev, "at 0x%08llX mapped to 0x%p, irq=%d\n", + (unsigned long long)mem->start, xspi->regs, xspi->irq); + return master; + +free_irq: + free_irq(xspi->irq, xspi); +unmap_io: + iounmap(xspi->regs); +map_failed: + release_mem_region(mem->start, resource_size(mem)); +put_master: + spi_master_put(master); + return NULL; +} +EXPORT_SYMBOL(xilinx_spi_init); + +void xilinx_spi_deinit(struct spi_master *master) +{ + struct xilinx_spi *xspi; + + xspi = spi_master_get_devdata(master); + + spi_bitbang_stop(&xspi->bitbang); + free_irq(xspi->irq, xspi); + iounmap(xspi->regs); + + release_mem_region(xspi->mem.start, resource_size(&xspi->mem)); + spi_master_put(xspi->bitbang.master); +} +EXPORT_SYMBOL(xilinx_spi_deinit); + +static int __devinit xilinx_spi_probe(struct platform_device *dev) +{ + struct xspi_platform_data *pdata; + struct resource *r; + int irq, num_cs = 0, little_endian = 0, bits_per_word = 8; + struct spi_master *master; + u8 i; + + pdata = dev->dev.platform_data; + if (pdata) { + num_cs = pdata->num_chipselect; + little_endian = pdata->little_endian; + bits_per_word = pdata->bits_per_word; + } + +#ifdef CONFIG_OF + if (dev->dev.of_node) { + const __be32 *prop; + int len; + + /* number of slave select bits is required */ + prop = of_get_property(dev->dev.of_node, "xlnx,num-ss-bits", + &len); + if (prop && len >= sizeof(*prop)) + num_cs = __be32_to_cpup(prop); + } +#endif + + if (!num_cs) { + dev_err(&dev->dev, "Missing slave select configuration data\n"); + return -EINVAL; + } + + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + irq = platform_get_irq(dev, 0); + if (irq < 0) + return -ENXIO; + + master = xilinx_spi_init(&dev->dev, r, irq, dev->id, num_cs, + little_endian, bits_per_word); + if (!master) + return -ENODEV; + + if (pdata) { + for (i = 0; i < pdata->num_devices; i++) + spi_new_device(master, pdata->devices + i); + } + + platform_set_drvdata(dev, master); + return 0; +} + +static int __devexit xilinx_spi_remove(struct platform_device *dev) +{ + xilinx_spi_deinit(platform_get_drvdata(dev)); + platform_set_drvdata(dev, 0); + + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:" XILINX_SPI_NAME); + +static struct platform_driver xilinx_spi_driver = { + .probe = xilinx_spi_probe, + .remove = __devexit_p(xilinx_spi_remove), + .driver = { + .name = XILINX_SPI_NAME, + .owner = THIS_MODULE, + .of_match_table = xilinx_spi_of_match, + }, +}; + +static int __init xilinx_spi_pltfm_init(void) +{ + return platform_driver_register(&xilinx_spi_driver); +} +module_init(xilinx_spi_pltfm_init); + +static void __exit xilinx_spi_pltfm_exit(void) +{ + platform_driver_unregister(&xilinx_spi_driver); +} +module_exit(xilinx_spi_pltfm_exit); + +MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); +MODULE_DESCRIPTION("Xilinx SPI driver"); +MODULE_LICENSE("GPL"); |
