diff options
Diffstat (limited to 'drivers/serial')
30 files changed, 74 insertions, 27 deletions
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index ae0251e..78ed24b 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -35,6 +35,7 @@ #include <linux/pm.h> #include <linux/bitops.h> #include <linux/delay.h> +#include <linux/gfp.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index c3db16b..2b1ea3d 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -38,6 +38,7 @@ #include <linux/serial_8250.h> #include <linux/nmi.h> #include <linux/mutex.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 33149d9..d8c0ffb 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/serial_core.h> #include <linux/signal.h> -#include <linux/slab.h> #include <linux/types.h> #include <asm/hardware.h> diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c index 0e1410f..c13438c9 100644 --- a/drivers/serial/8250_hp300.c +++ b/drivers/serial/8250_hp300.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/dio.h> #include <linux/console.h> +#include <linux/slab.h> #include <asm/io.h> #include "8250.h" diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index e4b3c2c..b09a638 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -47,6 +47,7 @@ #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/clk.h> +#include <linux/slab.h> #include <asm/io.h> diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index ce6c353..743ebf5 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -47,6 +47,7 @@ #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/clk.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/sizes.h> diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index fcf273e3..96f7e74 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/ioport.h> +#include <linux/gfp.h> #include <linux/io.h> #include <linux/init.h> #include <linux/console.h> diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 7c72888..c88f8ad 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> +#include <linux/slab.h> #include <linux/platform_device.h> #include <linux/tty.h> #include <linux/tty_flip.h> diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 1b94c56..3fc1d66 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -29,6 +29,7 @@ #include <linux/module.h> #include <linux/tty.h> +#include <linux/gfp.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/serial.h> diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index a9802e7..814ac00 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -30,6 +30,7 @@ #include <linux/module.h> #include <linux/tty.h> #include <linux/ioport.h> +#include <linux/slab.h> #include <linux/init.h> #include <linux/serial.h> #include <linux/console.h> @@ -61,7 +62,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, void __iomem *pram; unsigned long offset; struct resource res; - unsigned long len; + resource_size_t len; /* Don't remap parameter RAM if it has already been initialized * during console setup. @@ -74,7 +75,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, if (of_address_to_resource(np, 1, &res)) return NULL; - len = 1 + res.end - res.start; + len = resource_size(&res); pram = ioremap(res.start, len); if (!pram) return NULL; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index e579d7a..4315b23 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -46,6 +46,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/rational.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 23ba6b4..f164ba4 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -20,6 +20,7 @@ #include <linux/pci.h> #include <linux/serial_core.h> #include <linux/ioc3.h> +#include <linux/slab.h> /* * Interesting things about the ioc3 diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 836d9ab..8ad28fc 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -22,6 +22,7 @@ #include <linux/pci.h> #include <linux/ioc4.h> #include <linux/serial_core.h> +#include <linux/slab.h> /* * interesting things about the ioc4 diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 12cb5e4..eaf5450 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -26,6 +26,7 @@ ***********************************************************************/ #include <linux/moduleparam.h> #include <linux/pci.h> +#include <linux/slab.h> #include "jsm.h" diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 5673ca9..7a4a914 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -30,6 +30,7 @@ #include <linux/serial_reg.h> #include <linux/delay.h> /* For udelay */ #include <linux/pci.h> +#include <linux/slab.h> #include "jsm.h" diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c index 3c30c56..3351c3b 100644 --- a/drivers/serial/max3100.c +++ b/drivers/serial/max3100.c @@ -41,6 +41,7 @@ #define MAX_MAX3100 4 #include <linux/delay.h> +#include <linux/slab.h> #include <linux/device.h> #include <linux/serial_core.h> #include <linux/serial.h> diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index 7bb5fee..b5aaef9 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -263,6 +263,7 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, } spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); @@ -379,6 +380,7 @@ static irqreturn_t mcf_interrupt(int irq, void *data) static void mcf_config_port(struct uart_port *port, int flags) { port->type = PORT_MCF; + port->fifosize = MCFUART_TXFIFOSIZE; /* Clear mask, so no surprise interrupts. */ writeb(0, port->membase + MCFUART_UIMR); @@ -424,7 +426,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /* * Define the basic serial functions we support. */ -static struct uart_ops mcf_uart_ops = { +static const struct uart_ops mcf_uart_ops = { .tx_empty = mcf_tx_empty, .get_mctrl = mcf_get_mctrl, .set_mctrl = mcf_set_mctrl, @@ -443,7 +445,7 @@ static struct uart_ops mcf_uart_ops = { .verify_port = mcf_verify_port, }; -static struct mcf_uart mcf_ports[3]; +static struct mcf_uart mcf_ports[4]; #define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index b5496c2..55e113a 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -70,6 +70,7 @@ #include <linux/dma-mapping.h> #include <linux/mv643xx.h> #include <linux/platform_device.h> +#include <linux/gfp.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 7571aaa..9711e06 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/console.h> -#include <linux/slab.h> #include <linux/delay.h> /* for udelay */ #include <linux/device.h> #include <asm/io.h> diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index cdf172e..4abfebd 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -11,6 +11,7 @@ */ #include <linux/init.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/of_platform.h> diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index f020de1..4eaa043 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -54,7 +54,6 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/console.h> -#include <linux/slab.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/bitops.h> diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 56ee082..1102a39 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -44,6 +44,7 @@ #include <linux/serial_core.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/slab.h> struct uart_pxa_port { struct uart_port port; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index e91db4b..8cfa5b1 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -105,6 +105,10 @@ struct serial_cfg_mem { * manfid 0x0160, 0x0104 * This card appears to have a 14.7456MHz clock. */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) { port->uartclk = 14745600; @@ -196,6 +200,11 @@ static const struct serial_quirk quirks[] = { .multi = -1, .setup = quirk_setup_brainboxes_0104, }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { .manfid = MANFID_IBM, .prodid = ~0, .multi = -1, @@ -745,6 +754,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 980f394..8eb094c 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -50,7 +50,7 @@ #include <linux/list.h> #include <linux/dmaengine.h> #include <linux/scatterlist.h> -#include <linux/timer.h> +#include <linux/slab.h> #ifdef CONFIG_SUPERH #include <asm/sh_bios.h> @@ -780,10 +780,6 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) if ((ssr_status & SCxSR_BRK(port)) && err_enabled) ret = sci_br_interrupt(irq, ptr); - WARN_ONCE(ret == IRQ_NONE, - "%s: %d IRQ %d, status %x, control %x\n", __func__, - irq, port->line, ssr_status, scr_status); - return ret; } diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index fad67d3..f70c49f 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -31,7 +31,9 @@ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SHMOBILE) + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define PORT_PTCR 0xA405011EUL # define PORT_PVCR 0xA4050122UL @@ -94,7 +96,9 @@ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7724) # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \ + 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ + 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -197,6 +201,8 @@ defined(CONFIG_CPU_SUBTYPE_SH7786) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8) #else #define SCI_CTRL_FLAGS_REIE 0 #endif @@ -230,7 +236,9 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SHMOBILE) + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) # define SCIF_ORER 0x0200 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) # define SCIF_RFDC_MASK 0x007f @@ -264,7 +272,9 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SHMOBILE) + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) # define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) # define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) @@ -359,7 +369,10 @@ SCI_OUT(sci_size, sci_offset, value); \ } -#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE) +#if defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ @@ -370,7 +383,9 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SHMOBILE) + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else @@ -406,7 +421,9 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SHMOBILE) + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) @@ -589,7 +606,9 @@ static inline int sci_rxd_in(struct uart_port *port) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SHMOBILE) + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index d514e28..d2e0321 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -474,7 +474,7 @@ static void sunsab_stop_rx(struct uart_port *port) { struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - up->interrupt_mask0 |= SAB82532_ISR0_TCD; + up->interrupt_mask0 |= SAB82532_IMR0_TCD; writeb(up->interrupt_mask1, &up->regs->w.imr0); } diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 170d3d6..01f7731 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -29,6 +29,7 @@ #include <linux/serial.h> #include <linux/sysrq.h> #include <linux/console.h> +#include <linux/slab.h> #ifdef CONFIG_SERIO #include <linux/serio.h> #endif @@ -1453,8 +1454,10 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { err = sunsu_kbd_ms_init(up); if (err) { + of_iounmap(&op->resource[0], + up->port.membase, up->reg_size); kfree(up); - goto out_unmap; + return err; } dev_set_drvdata(&op->dev, up); diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 7bf1026..786ba85 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -26,6 +26,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/ioport.h> +#include <linux/slab.h> #include "timbuart.h" diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index ab2ab3c..f0a6c61 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -19,7 +19,7 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <asm/io.h> -#if defined(CONFIG_OF) +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_platform.h> @@ -581,7 +581,7 @@ static struct platform_driver ulite_platform_driver = { /* --------------------------------------------------------------------- * OF bus bindings */ -#if defined(CONFIG_OF) +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) static int __devinit ulite_of_probe(struct of_device *op, const struct of_device_id *match) { @@ -631,11 +631,11 @@ static inline void __exit ulite_of_unregister(void) { of_unregister_platform_driver(&ulite_of_driver); } -#else /* CONFIG_OF */ -/* CONFIG_OF not enabled; do nothing helpers */ +#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ +/* Appropriate config not enabled; do nothing helpers */ static inline int __init ulite_of_register(void) { return 0; } static inline void __exit ulite_of_unregister(void) { } -#endif /* CONFIG_OF */ +#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ /* --------------------------------------------------------------------- * Module setup/teardown diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 465f2fa..0749049 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/serial.h> +#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/io.h> #include <linux/of_platform.h> |
