diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/8250.c | 16 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 31 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/amba-pl010.c | 15 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm2.c | 4 | ||||
| -rw-r--r-- | drivers/serial/imx.c | 2 | ||||
| -rw-r--r-- | drivers/serial/s3c2412.c | 1 | ||||
| -rw-r--r-- | drivers/serial/s5pv210.c | 154 | ||||
| -rw-r--r-- | drivers/serial/samsung.c | 8 | ||||
| -rw-r--r-- | drivers/serial/samsung.h | 19 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.c | 1 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 22 | ||||
| -rw-r--r-- | drivers/serial/sunsab.c | 2 | ||||
| -rw-r--r-- | drivers/serial/uartlite.c | 10 |
14 files changed, 250 insertions, 36 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 7c4ebe6e..c3db16b 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2408,6 +2408,21 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios, } static void +serial8250_set_ldisc(struct uart_port *port) +{ + int line = port->line; + + if (line >= port->state->port.tty->driver->num) + return; + + if (port->state->port.tty->ldisc->ops->num == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + serial8250_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + +static void serial8250_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { @@ -2628,6 +2643,7 @@ static struct uart_ops serial8250_pops = { .startup = serial8250_startup, .shutdown = serial8250_shutdown, .set_termios = serial8250_set_termios, + .set_ldisc = serial8250_set_ldisc, .pm = serial8250_pm, .type = serial8250_type, .release_port = serial8250_release_port, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d6ff733..f55c494 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on ARM && PLAT_S3C + depends on ARM && PLAT_SAMSUNG select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -455,11 +455,18 @@ config SERIAL_SAMSUNG provide all of these ports, depending on how the serial port pins are configured. +config SERIAL_SAMSUNG_UARTS_4 + bool + depends on ARM && PLAT_SAMSUNG + default y if CPU_S3C2443 + help + Internal node for the common case of 4 Samsung compatible UARTs + config SERIAL_SAMSUNG_UARTS int - depends on ARM && PLAT_S3C + depends on ARM && PLAT_SAMSUNG default 2 if ARCH_S3C2400 - default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443 + default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 help Select the number of available UART ports for the Samsung S3C @@ -526,20 +533,30 @@ config SERIAL_S3C24A0 Serial port support for the Samsung S3C24A0 SoC config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410) + tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440) + select SERIAL_SAMSUNG_UARTS_4 default y help - Serial port support for the Samsung S3C6400 and S3C6410 + Serial port support for the Samsung S3C6400, S3C6410 and S5P6440 SoCs config SERIAL_S5PC100 tristate "Samsung S5PC100 Serial port support" depends on SERIAL_SAMSUNG && CPU_S5PC100 + select SERIAL_SAMSUNG_UARTS_4 default y help Serial port support for the Samsung S5PC100 SoCs +config SERIAL_S5PV210 + tristate "Samsung S5PV210 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442) + select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210 + default y + help + Serial port support for Samsung's S5P Family of SoC's + config SERIAL_MAX3100 tristate "MAX3100 support" depends on SPI @@ -996,7 +1013,7 @@ config SERIAL_IP22_ZILOG_CONSOLE config SERIAL_SH_SCI tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || H8300) + depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) select SERIAL_CORE config SERIAL_SH_SCI_NR_UARTS diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 5548fe7..6aa4723 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o +obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 429a8ae..e4b3c2c 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -471,6 +471,20 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&uap->port.lock, flags); } +static void pl010_set_ldisc(struct uart_port *port) +{ + int line = port->line; + + if (line >= port->state->port.tty->driver->num) + return; + + if (port->state->port.tty->ldisc->ops->num == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + pl010_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + static const char *pl010_type(struct uart_port *port) { return port->type == PORT_AMBA ? "AMBA" : NULL; @@ -531,6 +545,7 @@ static struct uart_ops amba_pl010_pops = { .startup = pl010_startup, .shutdown = pl010_shutdown, .set_termios = pl010_set_termios, + .set_ldisc = pl010_set_ldisc, .type = pl010_type, .release_port = pl010_release_port, .request_port = pl010_request_port, diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index a9802e7..722eac1 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -61,7 +61,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, void __iomem *pram; unsigned long offset; struct resource res; - unsigned long len; + resource_size_t len; /* Don't remap parameter RAM if it has already been initialized * during console setup. @@ -74,7 +74,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, if (of_address_to_resource(np, 1, &res)) return NULL; - len = 1 + res.end - res.start; + len = resource_size(&res); pram = ioremap(res.start, len); if (!pram) return NULL; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index d00fcf8..e579d7a 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -440,7 +440,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) temp = readl(sport->port.membase + USR2); if (temp & USR2_BRCD) { - writel(temp | USR2_BRCD, sport->port.membase + USR2); + writel(USR2_BRCD, sport->port.membase + USR2); if (uart_handle_break(&sport->port)) continue; } diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c index ce75e28..1700b1a 100644 --- a/drivers/serial/s3c2412.c +++ b/drivers/serial/s3c2412.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = { .name = "Samsung S3C2412 UART", .type = PORT_S3C2412, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL, diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c new file mode 100644 index 0000000..8dc0383 --- /dev/null +++ b/drivers/serial/s5pv210.c @@ -0,0 +1,154 @@ +/* linux/drivers/serial/s5pv210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on drivers/serial/s3c6400.c + * + * Driver for Samsung S5PV210 SoC UARTs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> + +#include <asm/irq.h> +#include <mach/hardware.h> +#include <plat/regs-serial.h> +#include "samsung.h" + +static int s5pv210_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "pclk") == 0) + ucon &= ~S5PV210_UCON_CLKMASK; + else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S5PV210_UCON_CLKMASK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s5pv210_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + switch (ucon & S5PV210_UCON_CLKMASK) { + case S5PV210_UCON_PCLK: + clk->name = "pclk"; + break; + case S5PV210_UCON_UCLK: + clk->name = "uclk1"; + break; + } + + return 0; +} + +static int s5pv210_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + ucon &= S5PV210_UCON_CLKMASK; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ + .name = "Samsung S5PV210 UART0", \ + .type = PORT_S3C6400, \ + .fifosize = fifo_size, \ + .has_divslot = 1, \ + .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ + .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ + .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ + .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ + .get_clksrc = s5pv210_serial_getsource, \ + .set_clksrc = s5pv210_serial_setsource, \ + .reset_port = s5pv210_serial_resetport + +static struct s3c24xx_uart_info s5p_port_fifo256 = { + S5PV210_UART_DEFAULT_INFO(256), +}; + +static struct s3c24xx_uart_info s5p_port_fifo64 = { + S5PV210_UART_DEFAULT_INFO(64), +}; + +static struct s3c24xx_uart_info s5p_port_fifo16 = { + S5PV210_UART_DEFAULT_INFO(16), +}; + +static struct s3c24xx_uart_info *s5p_uart_inf[] = { + [0] = &s5p_port_fifo256, + [1] = &s5p_port_fifo64, + [2] = &s5p_port_fifo16, + [3] = &s5p_port_fifo16, +}; + +/* device management */ +static int s5p_serial_probe(struct platform_device *pdev) +{ + return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); +} + +static struct platform_driver s5p_serial_drv = { + .probe = s5p_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s5pv210-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init s5pv210_serial_console_init(void) +{ + return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf); +} + +console_initcall(s5pv210_serial_console_init); + +static int __init s5p_serial_init(void) +{ + return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf); +} + +static void __exit s5p_serial_exit(void) +{ + platform_driver_unregister(&s5p_serial_drv); +} + +module_init(s5p_serial_init); +module_exit(s5p_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s5pv210-uart"); +MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); +MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 52e3df1..a9d6c56 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) unsigned long ufstat, utrstat; if (ufcon & S3C2410_UFCON_FIFOMODE) { - /* fifo mode - check ammount of data in fifo registers... */ + /* fifo mode - check amount of data in fifo registers... */ ufstat = rd_regl(port, S3C2410_UFSTAT); return (ufstat & info->tx_fifofull) ? 0 : 1; @@ -1374,7 +1374,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, * data. */ -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) +static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) { struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; struct platform_device **platdev_ptr; @@ -1385,7 +1385,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) platdev_ptr = s3c24xx_uart_devs; for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info, *platdev_ptr); + s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); } return 0; @@ -1451,7 +1451,7 @@ static struct console s3c24xx_serial_console = { }; int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info *info) + struct s3c24xx_uart_info **info) { struct platform_device *dev = s3c24xx_uart_devs[0]; diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 1fb2234..0ac06a0 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -75,19 +75,24 @@ extern int s3c24xx_serial_probe(struct platform_device *dev, extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info *uart); + struct s3c24xx_uart_info **uart); extern int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info); #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE -#define s3c24xx_console_init(__drv, __inf) \ -static int __init s3c_serial_console_init(void) \ -{ \ - return s3c24xx_serial_initconsole(__drv, __inf); \ -} \ - \ +#define s3c24xx_console_init(__drv, __inf) \ +static int __init s3c_serial_console_init(void) \ +{ \ + struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \ + int i; \ + \ + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \ + uinfo[i] = __inf; \ + return s3c24xx_serial_initconsole(__drv, uinfo); \ +} \ + \ console_initcall(s3c_serial_console_init) #else diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 980f394..f7b9aff 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -50,7 +50,6 @@ #include <linux/list.h> #include <linux/dmaengine.h> #include <linux/scatterlist.h> -#include <linux/timer.h> #ifdef CONFIG_SUPERH #include <asm/sh_bios.h> diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index f7d2589..fad67d3 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -30,7 +30,8 @@ */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define PORT_PTCR 0xA405011EUL # define PORT_PVCR 0xA4050122UL @@ -228,7 +229,8 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) # define SCIF_ORER 0x0200 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) # define SCIF_RFDC_MASK 0x007f @@ -261,7 +263,8 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) # define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) # define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) @@ -356,7 +359,7 @@ SCI_OUT(sci_size, sci_offset, value); \ } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ @@ -366,7 +369,8 @@ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else @@ -401,7 +405,8 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) @@ -413,7 +418,7 @@ SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCxTDR, 0x20, 8) SCIF_FNS(SCxRDR, 0x24, 8) -SCIF_FNS(SCLSR, 0x24, 16) +SCIF_FNS(SCLSR, 0x00, 0) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) @@ -583,7 +588,8 @@ static inline int sci_rxd_in(struct uart_port *port) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index d514e28..d2e0321 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -474,7 +474,7 @@ static void sunsab_stop_rx(struct uart_port *port) { struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - up->interrupt_mask0 |= SAB82532_ISR0_TCD; + up->interrupt_mask0 |= SAB82532_IMR0_TCD; writeb(up->interrupt_mask1, &up->regs->w.imr0); } diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index ab2ab3c..f0a6c61 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -19,7 +19,7 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <asm/io.h> -#if defined(CONFIG_OF) +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_platform.h> @@ -581,7 +581,7 @@ static struct platform_driver ulite_platform_driver = { /* --------------------------------------------------------------------- * OF bus bindings */ -#if defined(CONFIG_OF) +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) static int __devinit ulite_of_probe(struct of_device *op, const struct of_device_id *match) { @@ -631,11 +631,11 @@ static inline void __exit ulite_of_unregister(void) { of_unregister_platform_driver(&ulite_of_driver); } -#else /* CONFIG_OF */ -/* CONFIG_OF not enabled; do nothing helpers */ +#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ +/* Appropriate config not enabled; do nothing helpers */ static inline int __init ulite_of_register(void) { return 0; } static inline void __exit ulite_of_unregister(void) { } -#endif /* CONFIG_OF */ +#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ /* --------------------------------------------------------------------- * Module setup/teardown |
