summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig9
-rw-r--r--drivers/serial/s3c2410.c143
-rw-r--r--drivers/serial/sunhv.c35
-rw-r--r--drivers/serial/sunsab.c12
-rw-r--r--drivers/serial/sunsu.c4
-rw-r--r--drivers/serial/sunzilog.c2
6 files changed, 175 insertions, 30 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index bef4a96..5b48ac2 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -354,21 +354,24 @@ config SERIAL_CLPS711X_CONSOLE
kernel at boot time.)
config SERIAL_S3C2410
- tristate "Samsung S3C2410 Serial port support"
+ tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
depends on ARM && ARCH_S3C2410
select SERIAL_CORE
help
- Support for the on-chip UARTs on the Samsung S3C2410X CPU,
+ Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
provide all of these ports, depending on how the serial port
pins are configured.
+ Currently this driver supports the UARTS on the S3C2410, S3C2440,
+ S3C2442, S3C2412 and S3C2413 CPUs.
+
config SERIAL_S3C2410_CONSOLE
bool "Support for console on S3C2410 serial port"
depends on SERIAL_S3C2410=y
select SERIAL_CORE_CONSOLE
help
- Allow selection of the S3C2410 on-board serial ports for use as
+ Allow selection of the S3C24XX on-board serial ports for use as
an virtual console.
Even if you say Y here, the currently visible virtual console
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 53c2465..837b6da 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -872,6 +872,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
return "S3C2410";
case PORT_S3C2440:
return "S3C2440";
+ case PORT_S3C2412:
+ return "S3C2412";
default:
return NULL;
}
@@ -1528,6 +1530,141 @@ static inline void s3c2440_serial_exit(void)
#define s3c2440_uart_inf_at NULL
#endif /* CONFIG_CPU_S3C2440 */
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+
+static int s3c2412_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ ucon &= ~S3C2412_UCON_CLKMASK;
+
+ if (strcmp(clk->name, "uclk") == 0)
+ ucon |= S3C2440_UCON_UCLK;
+ else if (strcmp(clk->name, "pclk") == 0)
+ ucon |= S3C2440_UCON_PCLK;
+ else if (strcmp(clk->name, "usysclk") == 0)
+ ucon |= S3C2412_UCON_USYSCLK;
+ else {
+ printk(KERN_ERR "unknown clock source %s\n", clk->name);
+ return -EINVAL;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+
+static int s3c2412_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ switch (ucon & S3C2412_UCON_CLKMASK) {
+ case S3C2412_UCON_UCLK:
+ clk->divisor = 1;
+ clk->name = "uclk";
+ break;
+
+ case S3C2412_UCON_PCLK:
+ case S3C2412_UCON_PCLK2:
+ clk->divisor = 1;
+ clk->name = "pclk";
+ break;
+
+ case S3C2412_UCON_USYSCLK:
+ clk->divisor = 1;
+ clk->name = "usysclk";
+ break;
+ }
+
+ return 0;
+}
+
+static int s3c2412_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ dbg("%s: port=%p (%08lx), cfg=%p\n",
+ __FUNCTION__, port, port->mapbase, cfg);
+
+ /* ensure we don't change the clock settings... */
+
+ ucon &= S3C2412_UCON_CLKMASK;
+
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c2412_uart_inf = {
+ .name = "Samsung S3C2412 UART",
+ .type = PORT_S3C2412,
+ .fifosize = 64,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c2412_serial_getsource,
+ .set_clksrc = s3c2412_serial_setsource,
+ .reset_port = s3c2412_serial_resetport,
+};
+
+/* device management */
+
+static int s3c2412_serial_probe(struct platform_device *dev)
+{
+ dbg("s3c2440_serial_probe: dev=%p\n", dev);
+ return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
+}
+
+static struct platform_driver s3c2412_serial_drv = {
+ .probe = s3c2412_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .suspend = s3c24xx_serial_suspend,
+ .resume = s3c24xx_serial_resume,
+ .driver = {
+ .name = "s3c2412-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+
+static inline int s3c2412_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+}
+
+static inline void s3c2412_serial_exit(void)
+{
+ platform_driver_unregister(&s3c2412_serial_drv);
+}
+
+#define s3c2412_uart_inf_at &s3c2412_uart_inf
+#else
+
+static inline int s3c2412_serial_init(void)
+{
+ return 0;
+}
+
+static inline void s3c2412_serial_exit(void)
+{
+}
+
+#define s3c2412_uart_inf_at NULL
+#endif /* CONFIG_CPU_S3C2440 */
+
+
/* module initialisation code */
static int __init s3c24xx_serial_modinit(void)
@@ -1542,6 +1679,7 @@ static int __init s3c24xx_serial_modinit(void)
s3c2400_serial_init();
s3c2410_serial_init();
+ s3c2412_serial_init();
s3c2440_serial_init();
return 0;
@@ -1551,6 +1689,7 @@ static void __exit s3c24xx_serial_modexit(void)
{
s3c2400_serial_exit();
s3c2410_serial_exit();
+ s3c2412_serial_exit();
s3c2440_serial_exit();
uart_unregister_driver(&s3c24xx_uart_drv);
@@ -1773,6 +1912,8 @@ static int s3c24xx_serial_initconsole(void)
info = s3c2410_uart_inf_at;
} else if (strcmp(dev->name, "s3c2440-uart") == 0) {
info = s3c2440_uart_inf_at;
+ } else if (strcmp(dev->name, "s3c2412-uart") == 0) {
+ info = s3c2412_uart_inf_at;
} else {
printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name);
return 0;
@@ -1796,4 +1937,4 @@ console_initcall(s3c24xx_serial_initconsole);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2410/S3C2440 Serial port driver");
+MODULE_DESCRIPTION("Samsung S3C2410/S3C2440/S3C2412 Serial port driver");
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index f137804..ba22e25 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -427,31 +427,32 @@ static int __init hv_console_compatible(char *buf, int len)
static unsigned int __init get_interrupt(void)
{
- const char *cons_str = "console";
- const char *compat_str = "compatible";
- int node = prom_getchild(sun4v_vdev_root);
- char buf[64];
- int err, len;
-
- node = prom_searchsiblings(node, cons_str);
- if (!node)
- return 0;
+ struct device_node *dev_node;
- len = prom_getproplen(node, compat_str);
- if (len == 0 || len == -1)
- return 0;
+ dev_node = sun4v_vdev_root->child;
+ while (dev_node != NULL) {
+ struct property *prop;
- err = prom_getproperty(node, compat_str, buf, 64);
- if (err == -1)
- return 0;
+ if (strcmp(dev_node->name, "console"))
+ goto next_sibling;
+
+ prop = of_find_property(dev_node, "compatible", NULL);
+ if (!prop)
+ goto next_sibling;
- if (!hv_console_compatible(buf, len))
+ if (hv_console_compatible(prop->value, prop->length))
+ break;
+
+ next_sibling:
+ dev_node = dev_node->sibling;
+ }
+ if (!dev_node)
return 0;
/* Ok, the this is the OBP node for the sun4v hypervisor
* console device. Decode the interrupt.
*/
- return sun4v_vdev_device_interrupt(node);
+ return sun4v_vdev_device_interrupt(dev_node);
}
static int __init sunhv_init(void)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index bfbe9dc..e4c0fd2 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -984,19 +984,19 @@ static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device *
for_each_ebus(ebus) {
for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->prom_name, "se")) {
+ if (!strcmp(edev->prom_node->name, "se")) {
callback(edev, arg);
continue;
- } else if (!strcmp(edev->prom_name, "serial")) {
- char compat[32];
+ } else if (!strcmp(edev->prom_node->name, "serial")) {
+ char *compat;
int clen;
/* On RIO this can be an SE, check it. We could
* just check ebus->is_rio, but this is more portable.
*/
- clen = prom_getproperty(edev->prom_node, "compatible",
- compat, sizeof(compat));
- if (clen > 0) {
+ compat = of_get_property(edev->prom_node,
+ "compatible", &clen);
+ if (compat && clen > 0) {
if (strncmp(compat, "sab82532", 8) == 0) {
callback(edev, arg);
continue;
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 4cdb610..0268b30 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1053,7 +1053,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up)
*/
for_each_ebus(ebus) {
for_each_ebusdev(dev, ebus) {
- if (dev->prom_node == up->port_node) {
+ if (dev->prom_node->node == up->port_node) {
/*
* The EBus is broken on sparc; it delivers
* virtual addresses in resources. Oh well...
@@ -1073,7 +1073,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up)
#ifdef CONFIG_SPARC64
for_each_isa(isa_br) {
for_each_isadev(isa_dev, isa_br) {
- if (isa_dev->prom_node == up->port_node) {
+ if (isa_dev->prom_node->node == up->port_node) {
/* Same on sparc64. Cool architecure... */
up->port.membase = (char *) isa_dev->resource.start;
up->port.mapbase = isa_dev->resource.start;
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 5b65697..76c9bac 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1106,7 +1106,7 @@ static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode)
+ FHC_UREGS_ICLR;
imap = central_bus->child->fhc_regs.uregs
+ FHC_UREGS_IMAP;
- zilog_irq = build_irq(12, 0, iclr, imap);
+ zilog_irq = build_irq(0, iclr, imap);
} else {
err = prom_getproperty(zsnode, "interrupts",
(char *) &sun4u_ino,
OpenPOWER on IntegriCloud