1 files changed, 59 insertions, 6 deletions

diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 2c7a66a..f9a24f4 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -102,6 +102,8 @@ struct uart_sunzilog_port {
 #endif
 };
 
+static void sunzilog_putchar(struct uart_port *port, int ch);
+
 #define ZILOG_CHANNEL_FROM_PORT(PORT)	((struct zilog_channel __iomem *)((PORT)->membase))
 #define UART_ZILOG(PORT)		((struct uart_sunzilog_port *)(PORT))
 
@@ -996,6 +998,50 @@ static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *se
 	return -EINVAL;
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int sunzilog_get_poll_char(struct uart_port *port)
+{
+	unsigned char ch, r1;
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	struct zilog_channel __iomem *channel
+		= ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+
+	r1 = read_zsreg(channel, R1);
+	if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+		writeb(ERR_RES, &channel->control);
+		ZSDELAY();
+		ZS_WSYNC(channel);
+	}
+
+	ch = readb(&channel->control);
+	ZSDELAY();
+
+	/* This funny hack depends upon BRK_ABRT not interfering
+	 * with the other bits we care about in R1.
+	 */
+	if (ch & BRK_ABRT)
+		r1 |= BRK_ABRT;
+
+	if (!(ch & Rx_CH_AV))
+		return NO_POLL_CHAR;
+
+	ch = readb(&channel->data);
+	ZSDELAY();
+
+	ch &= up->parity_mask;
+	return ch;
+}
+
+static void sunzilog_put_poll_char(struct uart_port *port,
+			unsigned char ch)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port;
+
+	sunzilog_putchar(&up->port, ch);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
 static struct uart_ops sunzilog_pops = {
 	.tx_empty	=	sunzilog_tx_empty,
 	.set_mctrl	=	sunzilog_set_mctrl,
@@ -1013,6 +1059,10 @@ static struct uart_ops sunzilog_pops = {
 	.request_port	=	sunzilog_request_port,
 	.config_port	=	sunzilog_config_port,
 	.verify_port	=	sunzilog_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	=	sunzilog_get_poll_char,
+	.poll_put_char	=	sunzilog_put_poll_char,
+#endif
 };
 
 static int uart_chip_count;
@@ -1180,7 +1230,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
 	       (sunzilog_reg.minor - 64) + con->index, con->index);
 
 	/* Get firmware console settings.  */
-	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node);
 
 	/* Firmware console speed is limited to 150-->38400 baud so
 	 * this hackish cflag thing is OK.
@@ -1358,7 +1408,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	int keyboard_mouse = 0;
 	int err;
 
-	if (of_find_property(op->node, "keyboard", NULL))
+	if (of_find_property(op->dev.of_node, "keyboard", NULL))
 		keyboard_mouse = 1;
 
 	/* uarts must come before keyboards/mice */
@@ -1415,7 +1465,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	sunzilog_init_hw(&up[1]);
 
 	if (!keyboard_mouse) {
-		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
+		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
 					    &sunzilog_reg, up[0].port.line,
 					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
@@ -1425,7 +1475,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 				   rp, sizeof(struct zilog_layout));
 			return err;
 		}
-		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
+		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
 					    &sunzilog_reg, up[1].port.line,
 					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
@@ -1491,8 +1541,11 @@ static const struct of_device_id zs_match[] = {
 MODULE_DEVICE_TABLE(of, zs_match);
 
 static struct of_platform_driver zs_driver = {
-	.name		= "zs",
-	.match_table	= zs_match,
+	.driver = {
+		.name = "zs",
+		.owner = THIS_MODULE,
+		.of_match_table = zs_match,
+	},
 	.probe		= zs_probe,
 	.remove		= __devexit_p(zs_remove),
 };