summaryrefslogtreecommitdiffstats
path: root/drivers/serial/jsm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/jsm')
-rw-r--r--drivers/serial/jsm/jsm.h8
-rw-r--r--drivers/serial/jsm/jsm_driver.c48
-rw-r--r--drivers/serial/jsm/jsm_neo.c8
-rw-r--r--drivers/serial/jsm/jsm_tty.c6
4 files changed, 49 insertions, 21 deletions
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 4e5f3bd..38a509c 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -138,7 +138,6 @@ struct jsm_board
u32 nasync; /* Number of ports on card */
u32 irq; /* Interrupt request number */
- u64 intr_count; /* Count of interrupts */
u64 membase; /* Start of base memory of the card */
u64 membase_end; /* End of base memory of the card */
@@ -206,8 +205,6 @@ struct jsm_channel {
u64 ch_close_delay; /* How long we should drop RTS/DTR for */
- u64 ch_cpstime; /* Time for CPS calculations */
-
tcflag_t ch_c_iflag; /* channel iflags */
tcflag_t ch_c_cflag; /* channel cflags */
tcflag_t ch_c_oflag; /* channel oflags */
@@ -215,11 +212,6 @@ struct jsm_channel {
u8 ch_stopc; /* Stop character */
u8 ch_startc; /* Start character */
- u32 ch_old_baud; /* Cache of the current baud */
- u32 ch_custom_speed;/* Custom baud, if set */
-
- u32 ch_wopen; /* Waiting for open process cnt */
-
u8 ch_mostat; /* FEP output modem status */
u8 ch_mistat; /* FEP input modem status */
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index b3604aa..108c3e0 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -48,6 +48,17 @@ struct uart_driver jsm_uart_driver = {
.nr = NR_PORTS,
};
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev);
+static void jsm_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers jsm_err_handler = {
+ .error_detected = jsm_io_error_detected,
+ .slot_reset = jsm_io_slot_reset,
+ .resume = jsm_io_resume,
+};
+
int jsm_debug;
module_param(jsm_debug, int, 0);
MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
@@ -123,7 +134,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
}
rc = request_irq(brd->irq, brd->bd_ops->intr,
- IRQF_DISABLED|IRQF_SHARED, "JSM", brd);
+ IRQF_SHARED, "JSM", brd);
if (rc) {
printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq);
goto out_iounmap;
@@ -164,6 +175,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
}
pci_set_drvdata(pdev, brd);
+ pci_save_state(pdev);
return 0;
out_free_irq:
@@ -222,8 +234,42 @@ static struct pci_driver jsm_driver = {
.id_table = jsm_pci_tbl,
.probe = jsm_probe_one,
.remove = __devexit_p(jsm_remove_one),
+ .err_handler = &jsm_err_handler,
};
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct jsm_board *brd = pci_get_drvdata(pdev);
+
+ jsm_remove_uart_port(brd);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev)
+{
+ int rc;
+
+ rc = pci_enable_device(pdev);
+
+ if (rc)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ pci_set_master(pdev);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void jsm_io_resume(struct pci_dev *pdev)
+{
+ struct jsm_board *brd = pci_get_drvdata(pdev);
+
+ pci_restore_state(pdev);
+
+ jsm_uart_port_init(brd);
+}
+
static int __init jsm_init_module(void)
{
int rc;
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index b4b124e..7960d96 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -954,13 +954,8 @@ static void neo_param(struct jsm_channel *ch)
ch->ch_flags |= (CH_BAUD0);
ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR);
neo_assert_modem_signals(ch);
- ch->ch_old_baud = 0;
return;
- } else if (ch->ch_custom_speed) {
- baud = ch->ch_custom_speed;
- if (ch->ch_flags & CH_BAUD0)
- ch->ch_flags &= ~(CH_BAUD0);
} else {
int i;
unsigned int cflag;
@@ -1045,7 +1040,6 @@ static void neo_param(struct jsm_channel *ch)
quot = ch->ch_bd->bd_dividend / baud;
if (quot != 0) {
- ch->ch_old_baud = baud;
writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr);
writeb((quot & 0xff), &ch->ch_neo_uart->txrx);
writeb((quot >> 8), &ch->ch_neo_uart->ier);
@@ -1123,8 +1117,6 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
unsigned long lock_flags2;
int outofloop_count = 0;
- brd->intr_count++;
-
/* Lock out the slow poller from running on this board. */
spin_lock_irqsave(&brd->bd_intr_lock, lock_flags);
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 7439c03..cd95e21 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -296,8 +296,6 @@ static void jsm_tty_close(struct uart_port *port)
bd->bd_ops->assert_modem_signals(channel);
}
- channel->ch_old_baud = 0;
-
/* Turn off UART interrupts for this port */
channel->ch_bd->bd_ops->uart_off(channel);
@@ -432,7 +430,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
return 0;
}
-int __devinit jsm_uart_port_init(struct jsm_board *brd)
+int jsm_uart_port_init(struct jsm_board *brd)
{
int i;
unsigned int line;
@@ -472,7 +470,7 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
printk(KERN_INFO "jsm: add device failed\n");
else
- printk(KERN_INFO "Added device \n");
+ printk(KERN_INFO "jsm: Port %d added\n", i);
}
jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
OpenPOWER on IntegriCloud