diff options
Diffstat (limited to 'drivers/serial/Kconfig')
-rw-r--r-- | drivers/serial/Kconfig | 66 |
1 files changed, 50 insertions, 16 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 4fa7927..b82595c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -380,6 +380,21 @@ config SERIAL_ATMEL_CONSOLE console is the device which receives all kernel messages and warnings and which allows logins in single user mode). +config SERIAL_ATMEL_PDC + bool "Support DMA transfers on AT91 / AT32 serial port" + depends on SERIAL_ATMEL + default y + help + Say Y here if you wish to use the PDC to do DMA transfers to + and from the Atmel AT91 / AT32 serial port. In order to + actually use DMA transfers, make sure that the use_dma_tx + and use_dma_rx members in the atmel_uart_data struct is set + appropriately for each port. + + Note that break and error handling currently doesn't work + properly when DMA is enabled. Make sure that ports where + this matters don't use DMA. + config SERIAL_ATMEL_TTYAT bool "Install as device ttyATn instead of ttySn" depends on SERIAL_ATMEL=y @@ -465,20 +480,24 @@ config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT select SERIAL_CORE - help - DZ11-family serial controllers for VAXstations, including the - DC7085, M7814, and M7819. + default y + ---help--- + DZ11-family serial controllers for DECstations and VAXstations, + including the DC7085, M7814, and M7819. config SERIAL_DZ_CONSOLE bool "Support console on DECstation DZ serial driver" depends on SERIAL_DZ=y select SERIAL_CORE_CONSOLE - help + default y + ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all kernel messages and warnings and which allows logins in single user - mode). Note that the firmware uses ttyS0 as the serial console on - the Maxine and ttyS2 on the others. + mode). + + Note that the firmware uses ttyS3 as the serial console on + DECstations that use this driver. If unsure, say Y. @@ -877,15 +896,15 @@ config SERIAL_SUNHV systems. Say Y if you want to be able to use this device. config SERIAL_IP22_ZILOG - tristate "IP22 Zilog8530 serial support" - depends on SGI_IP22 + tristate "SGI Zilog8530 serial support" + depends on SGI_HAS_ZILOG select SERIAL_CORE help - This driver supports the Zilog8530 serial ports found on SGI IP22 + This driver supports the Zilog8530 serial ports found on SGI systems. Say Y or M if you want to be able to these serial ports. config SERIAL_IP22_ZILOG_CONSOLE - bool "Console on IP22 Zilog8530 serial port" + bool "Console on SGI Zilog8530 serial port" depends on SERIAL_IP22_ZILOG=y select SERIAL_CORE_CONSOLE @@ -1138,17 +1157,17 @@ config SERIAL_SGI_L1_CONSOLE say Y. Otherwise, say N. config SERIAL_MPC52xx - tristate "Freescale MPC52xx family PSC serial support" - depends on PPC_MPC52xx + tristate "Freescale MPC52xx/MPC512x family PSC serial support" + depends on PPC_MPC52xx || PPC_MPC512x select SERIAL_CORE help - This drivers support the MPC52xx PSC serial ports. If you would - like to use them, you must answer Y or M to this option. Not that + This driver supports MPC52xx and MPC512x PSC serial ports. If you would + like to use them, you must answer Y or M to this option. Note that for use as console, it must be included in kernel and not as a module. config SERIAL_MPC52xx_CONSOLE - bool "Console on a Freescale MPC52xx family PSC serial port" + bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" depends on SERIAL_MPC52xx=y select SERIAL_CORE_CONSOLE help @@ -1156,7 +1175,7 @@ config SERIAL_MPC52xx_CONSOLE of the Freescale MPC52xx family as a console. config SERIAL_MPC52xx_CONSOLE_BAUD - int "Freescale MPC52xx family PSC serial port baud" + int "Freescale MPC52xx/MPC512x family PSC serial port baud" depends on SERIAL_MPC52xx_CONSOLE=y default "9600" help @@ -1318,4 +1337,19 @@ config SERIAL_QE This driver supports the QE serial ports on Freescale embedded PowerPC that contain a QUICC Engine. +config SERIAL_SC26XX + tristate "SC2681/SC2692 serial port support" + depends on SNI_RM + select SERIAL_CORE + help + This is a driver for the onboard serial ports of + older RM400 machines. + +config SERIAL_SC26XX_CONSOLE + bool "Console on SC2681/SC2692 serial port" + depends on SERIAL_SC26XX + select SERIAL_CORE_CONSOLE + help + Support for Console on SC2681/SC2692 serial ports. + endmenu |