diff options
Diffstat (limited to 'drivers/serial/8250_pci.c')
-rw-r--r-- | drivers/serial/8250_pci.c | 71 |
1 files changed, 51 insertions, 20 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index de54bdc5..07f05e9 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -389,6 +389,9 @@ static void __devexit sbs_exit(struct pci_dev *dev) * - 10x cards have control registers in IO and/or memory space; * - 20x cards have control registers in standard PCI configuration space. * + * There are also Quartet Serial cards which use Oxford Semiconductor + * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. + * * Note: some SIIG cards are probed by the parport_serial object. */ @@ -1026,6 +1029,10 @@ enum pci_board_num_t { pbn_b0_2_921600, pbn_b0_4_921600, + pbn_b0_2_1130000, + + pbn_b0_4_1152000, + pbn_b0_bt_1_115200, pbn_b0_bt_2_115200, pbn_b0_bt_8_115200, @@ -1159,6 +1166,20 @@ static struct pci_board pci_boards[] __devinitdata = { .uart_offset = 8, }, + [pbn_b0_2_1130000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1130000, + .uart_offset = 8, + }, + + [pbn_b0_4_1152000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 8, + }, + [pbn_b0_bt_1_115200] = { .flags = FL_BASE0|FL_BASE_BARS, .num_ports = 1, @@ -1755,33 +1776,30 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) static void __devexit pciserial_remove_one(struct pci_dev *dev) { struct serial_private *priv = pci_get_drvdata(dev); + struct pci_serial_quirk *quirk; + int i; pci_set_drvdata(dev, NULL); - if (priv) { - struct pci_serial_quirk *quirk; - int i; - - for (i = 0; i < priv->nr; i++) - serial8250_unregister_port(priv->line[i]); + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); - for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { - if (priv->remapped_bar[i]) - iounmap(priv->remapped_bar[i]); - priv->remapped_bar[i] = NULL; - } + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (priv->remapped_bar[i]) + iounmap(priv->remapped_bar[i]); + priv->remapped_bar[i] = NULL; + } - /* - * Find the exit quirks. - */ - quirk = find_quirk(dev); - if (quirk->exit) - quirk->exit(dev); + /* + * Find the exit quirks. + */ + quirk = find_quirk(dev); + if (quirk->exit) + quirk->exit(dev); - pci_disable_device(dev); + pci_disable_device(dev); - kfree(priv); - } + kfree(priv); } static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) @@ -1978,6 +1996,19 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, pbn_b0_4_921600 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0, + pbn_b0_4_1152000 }, + + /* + * The below card is a little controversial since it is the + * subject of a PCI vendor/device ID clash. (See + * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). + * For now just used the hex ID 0x950a. + */ + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_1130000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_115200 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, |