diff options
Diffstat (limited to 'drivers/scsi')
33 files changed, 616 insertions, 204 deletions
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index b7bd5b0..3868ab2 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1800,10 +1800,12 @@ static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_ switch (retval) { case SCSI_MLQUEUE_HOST_BUSY: twa_free_request_id(tw_dev, request_id); + twa_unmap_scsi_data(tw_dev, request_id); break; case 1: tw_dev->state[request_id] = TW_S_COMPLETED; twa_free_request_id(tw_dev, request_id); + twa_unmap_scsi_data(tw_dev, request_id); SCpnt->result = (DID_ERROR << 16); done(SCpnt); retval = 0; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8d9dae8..3878b73 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -837,6 +837,7 @@ config SCSI_ISCI # (temporary): known alpha quality driver depends on EXPERIMENTAL select SCSI_SAS_LIBSAS + select SCSI_SAS_HOST_SMP ---help--- This driver supports the 6Gb/s SAS capabilities of the storage control unit found in the Intel(R) C600 series chipset. diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 3c08f53..6153a66 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -88,7 +88,7 @@ obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/ -obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx/ +obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/ obj-$(CONFIG_SCSI_LPFC) += lpfc/ obj-$(CONFIG_SCSI_BFA_FC) += bfa/ obj-$(CONFIG_SCSI_PAS16) += pas16.o diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index e7d0d47..e5f2d7d 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -1283,6 +1283,8 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced) kfree(aac->queues); aac->queues = NULL; free_irq(aac->pdev->irq, aac); + if (aac->msi) + pci_disable_msi(aac->pdev); kfree(aac->fsa_dev); aac->fsa_dev = NULL; quirks = aac_get_driver_ident(index)->quirks; diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 9ae80cd..dba72a4 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -563,7 +563,7 @@ int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn, nopout_wqe->itt = ((u16)task->itt | (ISCSI_TASK_TYPE_MPATH << ISCSI_TMF_REQUEST_TYPE_SHIFT)); - nopout_wqe->ttt = nopout_hdr->ttt; + nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt); nopout_wqe->flags = 0; if (!unsol) nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION; diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c index bd22041..f586448 100644 --- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c +++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c @@ -913,7 +913,7 @@ static void l2t_put(struct cxgbi_sock *csk) struct t3cdev *t3dev = (struct t3cdev *)csk->cdev->lldev; if (csk->l2t) { - l2t_release(L2DATA(t3dev), csk->l2t); + l2t_release(t3dev, csk->l2t); csk->l2t = NULL; cxgbi_sock_put(csk); } diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index ba710e3..5d0e9a2 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -432,6 +432,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe) u8 flogi_maddr[ETH_ALEN]; const struct net_device_ops *ops; + rtnl_lock(); + /* * Don't listen for Ethernet packets anymore. * synchronize_net() ensures that the packet handlers are not running @@ -461,6 +463,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe) " specific feature for LLD.\n"); } + rtnl_unlock(); + /* Release the self-reference taken during fcoe_interface_create() */ fcoe_interface_put(fcoe); } @@ -1951,11 +1955,8 @@ static void fcoe_destroy_work(struct work_struct *work) fcoe_if_destroy(port->lport); /* Do not tear down the fcoe interface for NPIV port */ - if (!npiv) { - rtnl_lock(); + if (!npiv) fcoe_interface_cleanup(fcoe); - rtnl_unlock(); - } mutex_unlock(&fcoe_config_mutex); } @@ -2009,8 +2010,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) printk(KERN_ERR "fcoe: Failed to create interface (%s)\n", netdev->name); rc = -EIO; + rtnl_unlock(); fcoe_interface_cleanup(fcoe); - goto out_nodev; + goto out_nortnl; } /* Make this the "master" N_Port */ @@ -2027,6 +2029,7 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) out_nodev: rtnl_unlock(); +out_nortnl: mutex_unlock(&fcoe_config_mutex); return rc; } diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index ec61bdb..b200b73 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -676,6 +676,16 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); removed[*nremoved] = h->dev[entry]; (*nremoved)++; + + /* + * New physical devices won't have target/lun assigned yet + * so we need to preserve the values in the slot we are replacing. + */ + if (new_entry->target == -1) { + new_entry->target = h->dev[entry]->target; + new_entry->lun = h->dev[entry]->lun; + } + h->dev[entry] = new_entry; added[*nadded] = new_entry; (*nadded)++; @@ -1548,10 +1558,17 @@ static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, } static int hpsa_update_device_info(struct ctlr_info *h, - unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) + unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device, + unsigned char *is_OBDR_device) { -#define OBDR_TAPE_INQ_SIZE 49 + +#define OBDR_SIG_OFFSET 43 +#define OBDR_TAPE_SIG "$DR-10" +#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1) +#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN) + unsigned char *inq_buff; + unsigned char *obdr_sig; inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); if (!inq_buff) @@ -1583,6 +1600,16 @@ static int hpsa_update_device_info(struct ctlr_info *h, else this_device->raid_level = RAID_UNKNOWN; + if (is_OBDR_device) { + /* See if this is a One-Button-Disaster-Recovery device + * by looking for "$DR-10" at offset 43 in inquiry data. + */ + obdr_sig = &inq_buff[OBDR_SIG_OFFSET]; + *is_OBDR_device = (this_device->devtype == TYPE_ROM && + strncmp(obdr_sig, OBDR_TAPE_SIG, + OBDR_SIG_LEN) == 0); + } + kfree(inq_buff); return 0; @@ -1716,7 +1743,7 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, return 0; } - if (hpsa_update_device_info(h, scsi3addr, this_device)) + if (hpsa_update_device_info(h, scsi3addr, this_device, NULL)) return 0; (*nmsa2xxx_enclosures)++; hpsa_set_bus_target_lun(this_device, bus, target, 0); @@ -1808,7 +1835,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) */ struct ReportLUNdata *physdev_list = NULL; struct ReportLUNdata *logdev_list = NULL; - unsigned char *inq_buff = NULL; u32 nphysicals = 0; u32 nlogicals = 0; u32 ndev_allocated = 0; @@ -1824,11 +1850,9 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) GFP_KERNEL); physdev_list = kzalloc(reportlunsize, GFP_KERNEL); logdev_list = kzalloc(reportlunsize, GFP_KERNEL); - inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); - if (!currentsd || !physdev_list || !logdev_list || - !inq_buff || !tmpdevice) { + if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) { dev_err(&h->pdev->dev, "out of memory\n"); goto out; } @@ -1863,7 +1887,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) /* adjust our table of devices */ nmsa2xxx_enclosures = 0; for (i = 0; i < nphysicals + nlogicals + 1; i++) { - u8 *lunaddrbytes; + u8 *lunaddrbytes, is_OBDR = 0; /* Figure out where the LUN ID info is coming from */ lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position, @@ -1874,7 +1898,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) continue; /* Get device type, vendor, model, device id */ - if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) + if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice, + &is_OBDR)) continue; /* skip it if we can't talk to it. */ figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, tmpdevice); @@ -1898,7 +1923,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) hpsa_set_bus_target_lun(this_device, bus, target, lun); switch (this_device->devtype) { - case TYPE_ROM: { + case TYPE_ROM: /* We don't *really* support actual CD-ROM devices, * just "One Button Disaster Recovery" tape drive * which temporarily pretends to be a CD-ROM drive. @@ -1906,15 +1931,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) * device by checking for "$DR-10" in bytes 43-48 of * the inquiry data. */ - char obdr_sig[7]; -#define OBDR_TAPE_SIG "$DR-10" - strncpy(obdr_sig, &inq_buff[43], 6); - obdr_sig[6] = '\0'; - if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) - /* Not OBDR device, ignore it. */ - break; - } - ncurrent++; + if (is_OBDR) + ncurrent++; break; case TYPE_DISK: if (i < nphysicals) @@ -1947,7 +1965,6 @@ out: for (i = 0; i < ndev_allocated; i++) kfree(currentsd[i]); kfree(currentsd); - kfree(inq_buff); kfree(physdev_list); kfree(logdev_list); } diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 26072f1..6981b77 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -531,6 +531,9 @@ static void sci_controller_process_completions(struct isci_host *ihost) break; case SCU_COMPLETION_TYPE_EVENT: + sci_controller_event_completion(ihost, ent); + break; + case SCU_COMPLETION_TYPE_NOTIFY: { event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) << (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT); @@ -1091,6 +1094,7 @@ static void isci_host_completion_routine(unsigned long data) struct isci_request *request; struct isci_request *next_request; struct sas_task *task; + u16 active; INIT_LIST_HEAD(&completed_request_list); INIT_LIST_HEAD(&errored_request_list); @@ -1181,6 +1185,13 @@ static void isci_host_completion_routine(unsigned long data) } } + /* the coalesence timeout doubles at each encoding step, so + * update it based on the ilog2 value of the outstanding requests + */ + active = isci_tci_active(ihost); + writel(SMU_ICC_GEN_VAL(NUMBER, active) | + SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)), + &ihost->smu_registers->interrupt_coalesce_control); } /** @@ -1471,7 +1482,7 @@ static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm) struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* set the default interrupt coalescence number and timeout value. */ - sci_controller_set_interrupt_coalescence(ihost, 0x10, 250); + sci_controller_set_interrupt_coalescence(ihost, 0, 0); } static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm) diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 062101a..9f33831 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -369,6 +369,9 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev) #define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1)) #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) +/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */ +#define ISCI_COALESCE_BASE 9 + /* expander attached sata devices require 3 rnc slots */ static inline int sci_remote_device_node_count(struct isci_remote_device *idev) { diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 61e0d09..29aa34e 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -59,10 +59,19 @@ #include <linux/firmware.h> #include <linux/efi.h> #include <asm/string.h> +#include <scsi/scsi_host.h> #include "isci.h" #include "task.h" #include "probe_roms.h" +#define MAJ 1 +#define MIN 0 +#define BUILD 0 +#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ + __stringify(BUILD) + +MODULE_VERSION(DRV_VERSION); + static struct scsi_transport_template *isci_transport_template; static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { @@ -113,6 +122,22 @@ unsigned char max_concurr_spinup = 1; module_param(max_concurr_spinup, byte, 0); MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); +static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); + + return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); +} + +static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); + +struct device_attribute *isci_host_attrs[] = { + &dev_attr_isci_id, + NULL +}; + static struct scsi_host_template isci_sht = { .module = THIS_MODULE, @@ -138,6 +163,7 @@ static struct scsi_host_template isci_sht = { .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, + .shost_attrs = isci_host_attrs, }; static struct sas_domain_function_template isci_transport_ops = { @@ -232,17 +258,6 @@ static int isci_register_sas_ha(struct isci_host *isci_host) return 0; } -static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); - struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); - struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); - - return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); -} - -static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); - static void isci_unregister(struct isci_host *isci_host) { struct Scsi_Host *shost; @@ -251,7 +266,6 @@ static void isci_unregister(struct isci_host *isci_host) return; shost = isci_host->shost; - device_remove_file(&shost->shost_dev, &dev_attr_isci_id); sas_unregister_ha(&isci_host->sas_ha); @@ -415,14 +429,8 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) if (err) goto err_shost_remove; - err = device_create_file(&shost->shost_dev, &dev_attr_isci_id); - if (err) - goto err_unregister_ha; - return isci_host; - err_unregister_ha: - sas_unregister_ha(&(isci_host->sas_ha)); err_shost_remove: scsi_remove_host(shost); err_shost: @@ -540,7 +548,8 @@ static __init int isci_init(void) { int err; - pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME); + pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n", + DRV_NAME, DRV_VERSION); isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); if (!isci_transport_template) diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 79313a7..430fc8f 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -104,6 +104,7 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, u32 parity_count = 0; u32 llctl, link_rate; u32 clksm_value = 0; + u32 sp_timeouts = 0; iphy->link_layer_registers = reg; @@ -211,6 +212,18 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); writel(llctl, &iphy->link_layer_registers->link_layer_control); + sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts); + + /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */ + sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF); + + /* Set RATE_CHANGE timeout value to 0x3B (59us). This ensures SCU can + * lock with 3Gb drive when SCU max rate is set to 1.5Gb. + */ + sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B); + + writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts); + if (is_a2(ihost->pdev)) { /* Program the max ARB time for the PHY to 700us so we inter-operate with * the PMC expander which shuts down PHYs if the expander PHY generates too diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h index 9b266c7..00afc73 100644 --- a/drivers/scsi/isci/registers.h +++ b/drivers/scsi/isci/registers.h @@ -1299,6 +1299,18 @@ struct scu_transport_layer_registers { #define SCU_AFE_XCVRCR_OFFSET 0x00DC #define SCU_AFE_LUTCR_OFFSET 0x00E0 +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_SHIFT (0UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_MASK (0x000000FFUL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_SHIFT (8UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_MASK (0x0000FF00UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_SHIFT (16UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_MASK (0x00FF0000UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_SHIFT (24UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_MASK (0xFF000000UL) + +#define SCU_SAS_PHYTOV_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_##name, value) + #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0) #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003) #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0) diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index a46e07a..b5d3a8c 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -732,12 +732,20 @@ sci_io_request_terminate(struct isci_request *ireq) sci_change_state(&ireq->sm, SCI_REQ_ABORTING); return SCI_SUCCESS; case SCI_REQ_TASK_WAIT_TC_RESP: + /* The task frame was already confirmed to have been + * sent by the SCU HW. Since the state machine is + * now only waiting for the task response itself, + * abort the request and complete it immediately + * and don't wait for the task response. + */ sci_change_state(&ireq->sm, SCI_REQ_ABORTING); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; case SCI_REQ_ABORTING: - sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); - return SCI_SUCCESS; + /* If a request has a termination requested twice, return + * a failure indication, since HW confirmation of the first + * abort is still outstanding. + */ case SCI_REQ_COMPLETED: default: dev_warn(&ireq->owning_controller->pdev->dev, @@ -2399,22 +2407,19 @@ static void isci_task_save_for_upper_layer_completion( } } -static void isci_request_process_stp_response(struct sas_task *task, - void *response_buffer) +static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis) { - struct dev_to_host_fis *d2h_reg_fis = response_buffer; struct task_status_struct *ts = &task->task_status; struct ata_task_resp *resp = (void *)&ts->buf[0]; - resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6)); - memcpy(&resp->ending_fis[0], response_buffer + 16, 24); + resp->frame_len = sizeof(*fis); + memcpy(resp->ending_fis, fis, sizeof(*fis)); ts->buf_valid_size = sizeof(*resp); - /** - * If the device fault bit is set in the status register, then + /* If the device fault bit is set in the status register, then * set the sense data and return. */ - if (d2h_reg_fis->status & ATA_DF) + if (fis->status & ATA_DF) ts->stat = SAS_PROTO_RESPONSE; else ts->stat = SAM_STAT_GOOD; @@ -2428,7 +2433,6 @@ static void isci_request_io_request_complete(struct isci_host *ihost, { struct sas_task *task = isci_request_access_task(request); struct ssp_response_iu *resp_iu; - void *resp_buf; unsigned long task_flags; struct isci_remote_device *idev = isci_lookup_device(task->dev); enum service_response response = SAS_TASK_UNDELIVERED; @@ -2565,9 +2569,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost, task); if (sas_protocol_ata(task->task_proto)) { - resp_buf = &request->stp.rsp; - isci_request_process_stp_response(task, - resp_buf); + isci_process_stp_response(task, &request->stp.rsp); } else if (SAS_PROTOCOL_SSP == task->task_proto) { /* crack the iu response buffer. */ diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c index e9e1e2a..16f88ab 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.c +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -72,7 +72,7 @@ int sci_unsolicited_frame_control_construct(struct isci_host *ihost) */ buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header); - size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t); + size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(uf_control->address_table.array[0]); /* * The Unsolicited Frame buffers are set at the start of the UF diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h index 31cb950..75d8966 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.h +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -214,7 +214,7 @@ struct sci_uf_address_table_array { * starting address of the UF address table. * 64-bit pointers are required by the hardware. */ - dma_addr_t *array; + u64 *array; /** * This field specifies the physical address location for the UF diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 01ff082..d261e98 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -494,6 +494,9 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, */ error = lport->tt.frame_send(lport, fp); + if (fh->fh_type == FC_TYPE_BLS) + return error; + /* * Update the exchange and sequence flags, * assuming all frames for the sequence have been sent. @@ -575,42 +578,35 @@ static void fc_seq_set_resp(struct fc_seq *sp, } /** - * fc_seq_exch_abort() - Abort an exchange and sequence - * @req_sp: The sequence to be aborted + * fc_exch_abort_locked() - Abort an exchange + * @ep: The exchange to be aborted * @timer_msec: The period of time to wait before aborting * - * Generally called because of a timeout or an abort from the upper layer. + * Locking notes: Called with exch lock held + * + * Return value: 0 on success else error code */ -static int fc_seq_exch_abort(const struct fc_seq *req_sp, - unsigned int timer_msec) +static int fc_exch_abort_locked(struct fc_exch *ep, + unsigned int timer_msec) { struct fc_seq *sp; - struct fc_exch *ep; struct fc_frame *fp; int error; - ep = fc_seq_exch(req_sp); - - spin_lock_bh(&ep->ex_lock); if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) || - ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) { - spin_unlock_bh(&ep->ex_lock); + ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) return -ENXIO; - } /* * Send the abort on a new sequence if possible. */ sp = fc_seq_start_next_locked(&ep->seq); - if (!sp) { - spin_unlock_bh(&ep->ex_lock); + if (!sp) return -ENOMEM; - } ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL; if (timer_msec) fc_exch_timer_set_locked(ep, timer_msec); - spin_unlock_bh(&ep->ex_lock); /* * If not logged into the fabric, don't send ABTS but leave @@ -633,6 +629,28 @@ static int fc_seq_exch_abort(const struct fc_seq *req_sp, } /** + * fc_seq_exch_abort() - Abort an exchange and sequence + * @req_sp: The sequence to be aborted + * @timer_msec: The period of time to wait before aborting + * + * Generally called because of a timeout or an abort from the upper layer. + * + * Return value: 0 on success else error code + */ +static int fc_seq_exch_abort(const struct fc_seq *req_sp, + unsigned int timer_msec) +{ + struct fc_exch *ep; + int error; + + ep = fc_seq_exch(req_sp); + spin_lock_bh(&ep->ex_lock); + error = fc_exch_abort_locked(ep, timer_msec); + spin_unlock_bh(&ep->ex_lock); + return error; +} + +/** * fc_exch_timeout() - Handle exchange timer expiration * @work: The work_struct identifying the exchange that timed out */ @@ -1715,6 +1733,7 @@ static void fc_exch_reset(struct fc_exch *ep) int rc = 1; spin_lock_bh(&ep->ex_lock); + fc_exch_abort_locked(ep, 0); ep->state |= FC_EX_RST_CLEANUP; if (cancel_delayed_work(&ep->timeout_work)) atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ @@ -1962,6 +1981,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, struct fc_exch *ep; struct fc_seq *sp = NULL; struct fc_frame_header *fh; + struct fc_fcp_pkt *fsp = NULL; int rc = 1; ep = fc_exch_alloc(lport, fp); @@ -1984,8 +2004,10 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, fc_exch_setup_hdr(ep, fp, ep->f_ctl); sp->cnt++; - if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) + if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) { + fsp = fr_fsp(fp); fc_fcp_ddp_setup(fr_fsp(fp), ep->xid); + } if (unlikely(lport->tt.frame_send(lport, fp))) goto err; @@ -1999,7 +2021,8 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, spin_unlock_bh(&ep->ex_lock); return sp; err: - fc_fcp_ddp_done(fr_fsp(fp)); + if (fsp) + fc_fcp_ddp_done(fsp); rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index afb63c8..4c41ee8 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -2019,6 +2019,11 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd) struct fc_fcp_internal *si; int rc = FAILED; unsigned long flags; + int rval; + + rval = fc_block_scsi_eh(sc_cmd); + if (rval) + return rval; lport = shost_priv(sc_cmd->device->host); if (lport->state != LPORT_ST_READY) @@ -2068,9 +2073,9 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd) int rc = FAILED; int rval; - rval = fc_remote_port_chkready(rport); + rval = fc_block_scsi_eh(sc_cmd); if (rval) - goto out; + return rval; lport = shost_priv(sc_cmd->device->host); @@ -2116,6 +2121,8 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) FC_SCSI_DBG(lport, "Resetting host\n"); + fc_block_scsi_eh(sc_cmd); + lport->tt.lport_reset(lport); wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT; while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies, diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e55ed9c..628f347 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -88,6 +88,7 @@ */ #include <linux/timer.h> +#include <linux/delay.h> #include <linux/slab.h> #include <asm/unaligned.h> @@ -1029,8 +1030,16 @@ static void fc_lport_enter_reset(struct fc_lport *lport) FCH_EVT_LIPRESET, 0); fc_vports_linkchange(lport); fc_lport_reset_locked(lport); - if (lport->link_up) + if (lport->link_up) { + /* + * Wait upto resource allocation time out before + * doing re-login since incomplete FIP exchanged + * from last session may collide with exchanges + * in new session. + */ + msleep(lport->r_a_tov); fc_lport_enter_flogi(lport); + } } /** diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index f84084b..c9e3dc0 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1721,7 +1721,7 @@ static int sas_find_bcast_dev(struct domain_device *dev, list_for_each_entry(ch, &ex->children, siblings) { if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) { res = sas_find_bcast_dev(ch, src_dev); - if (src_dev) + if (*src_dev) return res; } } diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 7836eb0..a31e05f 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1786,13 +1786,16 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable) fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN); } - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) { + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) { + int prot = 0; vha->flags.difdix_supported = 1; ql_dbg(ql_dbg_user, vha, 0x7082, "Registered for DIF/DIX type 1 and 3 protection.\n"); + if (ql2xenabledif == 1) + prot = SHOST_DIX_TYPE0_PROTECTION; scsi_host_set_prot(vha->host, - SHOST_DIF_TYPE1_PROTECTION + prot | SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 2155071..d79cd8a 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -8,24 +8,24 @@ /* * Table for showing the current message id in use for particular level * Change this table for addition of log/debug messages. - * ----------------------------------------------------- - * | Level | Last Value Used | - * ----------------------------------------------------- - * | Module Init and Probe | 0x0116 | - * | Mailbox commands | 0x111e | - * | Device Discovery | 0x2083 | - * | Queue Command and IO tracing | 0x302e | - * | DPC Thread | 0x401c | - * | Async Events | 0x5059 | - * | Timer Routines | 0x600d | - * | User Space Interactions | 0x709c | - * | Task Management | 0x8043 | - * | AER/EEH | 0x900f | - * | Virtual Port | 0xa007 | - * | ISP82XX Specific | 0xb027 | - * | MultiQ | 0xc00b | - * | Misc | 0xd00b | - * ----------------------------------------------------- + * ---------------------------------------------------------------------- + * | Level | Last Value Used | Holes | + * ---------------------------------------------------------------------- + * | Module Init and Probe | 0x0116 | | + * | Mailbox commands | 0x1126 | | + * | Device Discovery | 0x2083 | | + * | Queue Command and IO tracing | 0x302e | 0x3008 | + * | DPC Thread | 0x401c | | + * | Async Events | 0x5059 | | + * | Timer Routines | 0x600d | | + * | User Space Interactions | 0x709d | | + * | Task Management | 0x8041 | | + * | AER/EEH | 0x900f | | + * | Virtual Port | 0xa007 | | + * | ISP82XX Specific | 0xb04f | | + * | MultiQ | 0xc00b | | + * | Misc | 0xd00b | | + * ---------------------------------------------------------------------- */ #include "qla_def.h" diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index cc5a792..a03eaf4 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2529,6 +2529,7 @@ struct qla_hw_data { #define DT_ISP8021 BIT_14 #define DT_ISP_LAST (DT_ISP8021 << 1) +#define DT_T10_PI BIT_25 #define DT_IIDMA BIT_26 #define DT_FWI2 BIT_27 #define DT_ZIO_SUPPORTED BIT_28 @@ -2572,6 +2573,7 @@ struct qla_hw_data { #define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha)) #define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha)) +#define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI) #define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA) #define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2) #define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED) diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 691783a..aa69486 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -537,6 +537,11 @@ struct sts_entry_24xx { /* * If DIF Error is set in comp_status, these additional fields are * defined: + * + * !!! NOTE: Firmware sends expected/actual DIF data in big endian + * format; but all of the "data" field gets swab32-d in the beginning + * of qla2x00_status_entry(). + * * &data[10] : uint8_t report_runt_bg[2]; - computed guard * &data[12] : uint8_t actual_dif[8]; - DIF Data received * &data[20] : uint8_t expected_dif[8]; - DIF Data computed diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index def6942..37da04d 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3838,15 +3838,12 @@ qla2x00_loop_resync(scsi_qla_host_t *vha) req = vha->req; rsp = req->rsp; - atomic_set(&vha->loop_state, LOOP_UPDATE); clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); if (vha->flags.online) { if (!(rval = qla2x00_fw_ready(vha))) { /* Wait at most MAX_TARGET RSCNs for a stable link. */ wait_time = 256; do { - atomic_set(&vha->loop_state, LOOP_UPDATE); - /* Issue a marker after FW becomes ready. */ qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index d2e904b..9902834 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -102,3 +102,32 @@ qla2x00_set_fcport_state(fc_port_t *fcport, int state) fcport->d_id.b.al_pa); } } + +static inline int +qla2x00_hba_err_chk_enabled(srb_t *sp) +{ + /* + * Uncomment when corresponding SCSI changes are done. + * + if (!sp->cmd->prot_chk) + return 0; + * + */ + + switch (scsi_get_prot_op(sp->cmd)) { + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + if (ql2xenablehba_err_chk >= 1) + return 1; + break; + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + if (ql2xenablehba_err_chk >= 2) + return 1; + break; + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + return 1; + } + return 0; +} diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 49d6906..dbec896 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -709,20 +709,28 @@ struct fw_dif_context { * */ static inline void -qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, +qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt, unsigned int protcnt) { - struct sd_dif_tuple *spt; + struct scsi_cmnd *cmd = sp->cmd; scsi_qla_host_t *vha = shost_priv(cmd->device->host); - unsigned char op = scsi_get_prot_op(cmd); switch (scsi_get_prot_type(cmd)) { - /* For TYPE 0 protection: no checking */ case SCSI_PROT_DIF_TYPE0: - pkt->ref_tag_mask[0] = 0x00; - pkt->ref_tag_mask[1] = 0x00; - pkt->ref_tag_mask[2] = 0x00; - pkt->ref_tag_mask[3] = 0x00; + /* + * No check for ql2xenablehba_err_chk, as it would be an + * I/O error if hba tag generation is not done. + */ + pkt->ref_tag = cpu_to_le32((uint32_t) + (0xffffffff & scsi_get_lba(cmd))); + + if (!qla2x00_hba_err_chk_enabled(sp)) + break; + + pkt->ref_tag_mask[0] = 0xff; + pkt->ref_tag_mask[1] = 0xff; + pkt->ref_tag_mask[2] = 0xff; + pkt->ref_tag_mask[3] = 0xff; break; /* @@ -730,20 +738,16 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, * match LBA in CDB + N */ case SCSI_PROT_DIF_TYPE2: - if (!ql2xenablehba_err_chk) - break; - - if (scsi_prot_sg_count(cmd)) { - spt = page_address(sg_page(scsi_prot_sglist(cmd))) + - scsi_prot_sglist(cmd)[0].offset; - pkt->app_tag = swab32(spt->app_tag); - pkt->app_tag_mask[0] = 0xff; - pkt->app_tag_mask[1] = 0xff; - } + pkt->app_tag = __constant_cpu_to_le16(0); + pkt->app_tag_mask[0] = 0x0; + pkt->app_tag_mask[1] = 0x0; pkt->ref_tag = cpu_to_le32((uint32_t) (0xffffffff & scsi_get_lba(cmd))); + if (!qla2x00_hba_err_chk_enabled(sp)) + break; + /* enable ALL bytes of the ref tag */ pkt->ref_tag_mask[0] = 0xff; pkt->ref_tag_mask[1] = 0xff; @@ -763,26 +767,15 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, * 16 bit app tag. */ case SCSI_PROT_DIF_TYPE1: - if (!ql2xenablehba_err_chk) + pkt->ref_tag = cpu_to_le32((uint32_t) + (0xffffffff & scsi_get_lba(cmd))); + pkt->app_tag = __constant_cpu_to_le16(0); + pkt->app_tag_mask[0] = 0x0; + pkt->app_tag_mask[1] = 0x0; + + if (!qla2x00_hba_err_chk_enabled(sp)) break; - if (protcnt && (op == SCSI_PROT_WRITE_STRIP || - op == SCSI_PROT_WRITE_PASS)) { - spt = page_address(sg_page(scsi_prot_sglist(cmd))) + - scsi_prot_sglist(cmd)[0].offset; - ql_dbg(ql_dbg_io, vha, 0x3008, - "LBA from user %p, lba = 0x%x for cmd=%p.\n", - spt, (int)spt->ref_tag, cmd); - pkt->ref_tag = swab32(spt->ref_tag); - pkt->app_tag_mask[0] = 0x0; - pkt->app_tag_mask[1] = 0x0; - } else { - pkt->ref_tag = cpu_to_le32((uint32_t) - (0xffffffff & scsi_get_lba(cmd))); - pkt->app_tag = __constant_cpu_to_le16(0); - pkt->app_tag_mask[0] = 0x0; - pkt->app_tag_mask[1] = 0x0; - } /* enable ALL bytes of the ref tag */ pkt->ref_tag_mask[0] = 0xff; pkt->ref_tag_mask[1] = 0xff; @@ -798,8 +791,162 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, scsi_get_prot_type(cmd), cmd); } +struct qla2_sgx { + dma_addr_t dma_addr; /* OUT */ + uint32_t dma_len; /* OUT */ + + uint32_t tot_bytes; /* IN */ + struct scatterlist *cur_sg; /* IN */ + + /* for book keeping, bzero on initial invocation */ + uint32_t bytes_consumed; + uint32_t num_bytes; + uint32_t tot_partial; + + /* for debugging */ + uint32_t num_sg; + srb_t *sp; +}; static int +qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx, + uint32_t *partial) +{ + struct scatterlist *sg; + uint32_t cumulative_partial, sg_len; + dma_addr_t sg_dma_addr; + + if (sgx->num_bytes == sgx->tot_bytes) + return 0; + + sg = sgx->cur_sg; + cumulative_partial = sgx->tot_partial; + + sg_dma_addr = sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed; + + if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) { + sgx->dma_len = (blk_sz - cumulative_partial); + sgx->tot_partial = 0; + sgx->num_bytes += blk_sz; + *partial = 0; + } else { + sgx->dma_len = sg_len - sgx->bytes_consumed; + sgx->tot_partial += sgx->dma_len; + *partial = 1; + } + + sgx->bytes_consumed += sgx->dma_len; + + if (sg_len == sgx->bytes_consumed) { + sg = sg_next(sg); + sgx->num_sg++; + sgx->cur_sg = sg; + sgx->bytes_consumed = 0; + } + + return 1; +} + +static int +qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp, + uint32_t *dsd, uint16_t tot_dsds) +{ + void *next_dsd; + uint8_t avail_dsds = 0; + uint32_t dsd_list_len; + struct dsd_dma *dsd_ptr; + struct scatterlist *sg_prot; + uint32_t *cur_dsd = dsd; + uint16_t used_dsds = tot_dsds; + + uint32_t prot_int; + uint32_t partial; + struct qla2_sgx sgx; + dma_addr_t sle_dma; + uint32_t sle_dma_len, tot_prot_dma_len = 0; + struct scsi_cmnd *cmd = sp->cmd; + + prot_int = cmd->device->sector_size; + + memset(&sgx, 0, sizeof(struct qla2_sgx)); + sgx.tot_bytes = scsi_bufflen(sp->cmd); + sgx.cur_sg = scsi_sglist(sp->cmd); + sgx.sp = sp; + + sg_prot = scsi_prot_sglist(sp->cmd); + + while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) { + + sle_dma = sgx.dma_addr; + sle_dma_len = sgx.dma_len; +alloc_and_fill: + /* Allocate additional continuation packets? */ + if (avail_dsds == 0) { + avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ? + QLA_DSDS_PER_IOCB : used_dsds; + dsd_list_len = (avail_dsds + 1) * 12; + used_dsds -= avail_dsds; + + /* allocate tracking DS */ + dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC); + if (!dsd_ptr) + return 1; + + /* allocate new list */ + dsd_ptr->dsd_addr = next_dsd = + dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, + &dsd_ptr->dsd_list_dma); + + if (!next_dsd) { + /* + * Need to cleanup only this dsd_ptr, rest + * will be done by sp_free_dma() + */ + kfree(dsd_ptr); + return 1; + } + + list_add_tail(&dsd_ptr->list, + &((struct crc_context *)sp->ctx)->dsd_list); + + sp->flags |= SRB_CRC_CTX_DSD_VALID; + + /* add new list to cmd iocb or last list */ + *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = dsd_list_len; + cur_dsd = (uint32_t *)next_dsd; + } + *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(sle_dma_len); + avail_dsds--; + + if (partial == 0) { + /* Got a full protection interval */ + sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len; + sle_dma_len = 8; + + tot_prot_dma_len += sle_dma_len; + if (tot_prot_dma_len == sg_dma_len(sg_prot)) { + tot_prot_dma_len = 0; + sg_prot = sg_next(sg_prot); + } + + partial = 1; /* So as to not re-enter this block */ + goto alloc_and_fill; + } + } + /* Null termination */ + *cur_dsd++ = 0; + *cur_dsd++ = 0; + *cur_dsd++ = 0; + return 0; +} +static int qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd, uint16_t tot_dsds) { @@ -981,7 +1128,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, struct scsi_cmnd *cmd; struct scatterlist *cur_seg; int sgc; - uint32_t total_bytes; + uint32_t total_bytes = 0; uint32_t data_bytes; uint32_t dif_bytes; uint8_t bundling = 1; @@ -1023,8 +1170,10 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, __constant_cpu_to_le16(CF_READ_DATA); } - tot_prot_dsds = scsi_prot_sg_count(cmd); - if (!tot_prot_dsds) + if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT)) bundling = 0; /* Allocate CRC context from global pool */ @@ -1047,7 +1196,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list); - qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *) + qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *) &crc_ctx_pkt->ref_tag, tot_prot_dsds); cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma)); @@ -1076,7 +1225,6 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, fcp_cmnd->additional_cdb_len |= 2; int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun); - host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun)); memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len); cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32( @@ -1107,15 +1255,28 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */ /* Compute dif len and adjust data len to incude protection */ - total_bytes = data_bytes; dif_bytes = 0; blk_size = cmd->device->sector_size; - if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) { - dif_bytes = (data_bytes / blk_size) * 8; - total_bytes += dif_bytes; + dif_bytes = (data_bytes / blk_size) * 8; + + switch (scsi_get_prot_op(sp->cmd)) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + total_bytes = data_bytes; + data_bytes += dif_bytes; + break; + + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + total_bytes = data_bytes + dif_bytes; + break; + default: + BUG(); } - if (!ql2xenablehba_err_chk) + if (!qla2x00_hba_err_chk_enabled(sp)) fw_prot_opts |= 0x10; /* Disable Guard tag checking */ if (!bundling) { @@ -1151,7 +1312,12 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, cmd_pkt->control_flags |= __constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE); - if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd, + + if (!bundling && tot_prot_dsds) { + if (qla24xx_walk_and_build_sglist_no_difb(ha, sp, + cur_dsd, tot_dsds)) + goto crc_queuing_error; + } else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd, (tot_dsds - tot_prot_dsds))) goto crc_queuing_error; @@ -1414,6 +1580,22 @@ qla24xx_dif_start_scsi(srb_t *sp) goto queuing_error; else sp->flags |= SRB_DMA_VALID; + + if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) { + struct qla2_sgx sgx; + uint32_t partial; + + memset(&sgx, 0, sizeof(struct qla2_sgx)); + sgx.tot_bytes = scsi_bufflen(cmd); + sgx.cur_sg = scsi_sglist(cmd); + sgx.sp = sp; + + nseg = 0; + while (qla24xx_get_one_block_sg( + cmd->device->sector_size, &sgx, &partial)) + nseg++; + } } else nseg = 0; @@ -1428,6 +1610,11 @@ qla24xx_dif_start_scsi(srb_t *sp) goto queuing_error; else sp->flags |= SRB_CRC_PROT_DMA_VALID; + + if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) { + nseg = scsi_bufflen(cmd) / cmd->device->sector_size; + } } else { nseg = 0; } @@ -1454,6 +1641,7 @@ qla24xx_dif_start_scsi(srb_t *sp) /* Build header part of command packet (excluding the OPCODE). */ req->current_outstanding_cmd = handle; req->outstanding_cmds[handle] = sp; + sp->handle = handle; sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; req->cnt -= req_cnt; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index b16b772..8a7591f 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -719,7 +719,6 @@ skip_rio: vha->flags.rscn_queue_overflow = 1; } - atomic_set(&vha->loop_state, LOOP_UPDATE); atomic_set(&vha->loop_down_timer, 0); vha->flags.management_server_logged_in = 0; @@ -1435,25 +1434,27 @@ struct scsi_dif_tuple { * ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST * to indicate to the kernel that the HBA detected error. */ -static inline void +static inline int qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) { struct scsi_qla_host *vha = sp->fcport->vha; struct scsi_cmnd *cmd = sp->cmd; - struct scsi_dif_tuple *ep = - (struct scsi_dif_tuple *)&sts24->data[20]; - struct scsi_dif_tuple *ap = - (struct scsi_dif_tuple *)&sts24->data[12]; + uint8_t *ap = &sts24->data[12]; + uint8_t *ep = &sts24->data[20]; uint32_t e_ref_tag, a_ref_tag; uint16_t e_app_tag, a_app_tag; uint16_t e_guard, a_guard; - e_ref_tag = be32_to_cpu(ep->ref_tag); - a_ref_tag = be32_to_cpu(ap->ref_tag); - e_app_tag = be16_to_cpu(ep->app_tag); - a_app_tag = be16_to_cpu(ap->app_tag); - e_guard = be16_to_cpu(ep->guard); - a_guard = be16_to_cpu(ap->guard); + /* + * swab32 of the "data" field in the beginning of qla2x00_status_entry() + * would make guard field appear at offset 2 + */ + a_guard = le16_to_cpu(*(uint16_t *)(ap + 2)); + a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0)); + a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4)); + e_guard = le16_to_cpu(*(uint16_t *)(ep + 2)); + e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0)); + e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4)); ql_dbg(ql_dbg_io, vha, 0x3023, "iocb(s) %p Returned STATUS.\n", sts24); @@ -1465,6 +1466,63 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag, a_app_tag, e_app_tag, a_guard, e_guard); + /* + * Ignore sector if: + * For type 3: ref & app tag is all 'f's + * For type 0,1,2: app tag is all 'f's + */ + if ((a_app_tag == 0xffff) && + ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) || + (a_ref_tag == 0xffffffff))) { + uint32_t blocks_done, resid; + sector_t lba_s = scsi_get_lba(cmd); + + /* 2TB boundary case covered automatically with this */ + blocks_done = e_ref_tag - (uint32_t)lba_s + 1; + + resid = scsi_bufflen(cmd) - (blocks_done * + cmd->device->sector_size); + + scsi_set_resid(cmd, resid); + cmd->result = DID_OK << 16; + + /* Update protection tag */ + if (scsi_prot_sg_count(cmd)) { + uint32_t i, j = 0, k = 0, num_ent; + struct scatterlist *sg; + struct sd_dif_tuple *spt; + + /* Patch the corresponding protection tags */ + scsi_for_each_prot_sg(cmd, sg, + scsi_prot_sg_count(cmd), i) { + num_ent = sg_dma_len(sg) / 8; + if (k + num_ent < blocks_done) { + k += num_ent; + continue; + } + j = blocks_done - k - 1; + k = blocks_done; + break; + } + + if (k != blocks_done) { + qla_printk(KERN_WARNING, sp->fcport->vha->hw, + "unexpected tag values tag:lba=%x:%llx)\n", + e_ref_tag, (unsigned long long)lba_s); + return 1; + } + + spt = page_address(sg_page(sg)) + sg->offset; + spt += j; + + spt->app_tag = 0xffff; + if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3) + spt->ref_tag = 0xffffffff; + } + + return 0; + } + /* check guard */ if (e_guard != a_guard) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, @@ -1472,28 +1530,30 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } - /* check appl tag */ - if (e_app_tag != a_app_tag) { + /* check ref tag */ + if (e_ref_tag != a_ref_tag) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, - 0x10, 0x2); + 0x10, 0x3); set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } - /* check ref tag */ - if (e_ref_tag != a_ref_tag) { + /* check appl tag */ + if (e_app_tag != a_app_tag) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, - 0x10, 0x3); + 0x10, 0x2); set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } + + return 1; } /** @@ -1767,7 +1827,7 @@ check_scsi_status: break; case CS_DIF_ERROR: - qla2x00_handle_dif_error(sp, sts24); + logit = qla2x00_handle_dif_error(sp, sts24); break; default: cp->result = DID_ERROR << 16; @@ -2468,11 +2528,10 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp) goto skip_msi; } - if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX || - !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) { + if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) { ql_log(ql_log_warn, vha, 0x0035, "MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n", - ha->pdev->revision, ha->fw_attributes); + ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX); goto skip_msix; } diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index c706ed3..f488cc6 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -472,7 +472,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) host->can_queue = base_vha->req->length + 128; host->this_id = 255; host->cmd_per_lun = 3; - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) host->max_cmd_len = 32; else host->max_cmd_len = MAX_CMDSZ; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 5cbf33a..049807c 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -2208,6 +2208,7 @@ qla82xx_msix_rsp_q(int irq, void *dev_id) struct qla_hw_data *ha; struct rsp_que *rsp; struct device_reg_82xx __iomem *reg; + unsigned long flags; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -2218,11 +2219,11 @@ qla82xx_msix_rsp_q(int irq, void *dev_id) ha = rsp->hw; reg = &ha->iobase->isp82; - spin_lock_irq(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); vha = pci_get_drvdata(ha->pdev); qla24xx_process_response_queue(vha, rsp); WRT_REG_DWORD(®->host_int, 0); - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); return IRQ_HANDLED; } @@ -2838,6 +2839,16 @@ sufficient_dsds: int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); + /* build FCP_CMND IU */ + memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); + int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); + ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; + + if (cmd->sc_data_direction == DMA_TO_DEVICE) + ctx->fcp_cmnd->additional_cdb_len |= 1; + else if (cmd->sc_data_direction == DMA_FROM_DEVICE) + ctx->fcp_cmnd->additional_cdb_len |= 2; + /* * Update tagged queuing modifier -- default is TSK_SIMPLE (0). */ @@ -2854,16 +2865,6 @@ sufficient_dsds: } } - /* build FCP_CMND IU */ - memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); - int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); - ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; - - if (cmd->sc_data_direction == DMA_TO_DEVICE) - ctx->fcp_cmnd->additional_cdb_len |= 1; - else if (cmd->sc_data_direction == DMA_FROM_DEVICE) - ctx->fcp_cmnd->additional_cdb_len |= 2; - memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 + diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e02df27..4cace3f 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -106,17 +106,21 @@ MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to report for target devices."); /* Do not change the value of this after module load */ -int ql2xenabledif = 1; +int ql2xenabledif = 0; module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xenabledif, " Enable T10-CRC-DIF " - " Default is 0 - No DIF Support. 1 - Enable it"); + " Default is 0 - No DIF Support. 1 - Enable it" + ", 2 - Enable DIF for all types, except Type 0."); -int ql2xenablehba_err_chk; +int ql2xenablehba_err_chk = 2; module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xenablehba_err_chk, - " Enable T10-CRC-DIF Error isolation by HBA" - " Default is 0 - Error isolation disabled, 1 - Enable it"); + " Enable T10-CRC-DIF Error isolation by HBA:\n" + " Default is 1.\n" + " 0 -- Error isolation disabled\n" + " 1 -- Error isolation enabled only for DIX Type 0\n" + " 2 -- Error isolation enabled for all Types\n"); int ql2xiidmaenable=1; module_param(ql2xiidmaenable, int, S_IRUGO); @@ -909,7 +913,14 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) "Abort command mbx success.\n"); wait = 1; } + + spin_lock_irqsave(&ha->hardware_lock, flags); qla2x00_sp_compl(ha, sp); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Did the command return during mailbox execution? */ + if (ret == FAILED && !CMD_SP(cmd)) + ret = SUCCESS; /* Wait for the command to be returned. */ if (wait) { @@ -2251,7 +2262,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) host->this_id = 255; host->cmd_per_lun = 3; host->unique_id = host->host_no; - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) host->max_cmd_len = 32; else host->max_cmd_len = MAX_CMDSZ; @@ -2378,13 +2389,16 @@ skip_dpc: "Detected hba at address=%p.\n", ha); - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) { + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) { + int prot = 0; base_vha->flags.difdix_supported = 1; ql_dbg(ql_dbg_init, base_vha, 0x00f1, "Registering for DIF/DIX type 1 and 3 protection.\n"); + if (ql2xenabledif == 1) + prot = SHOST_DIX_TYPE0_PROTECTION; scsi_host_set_prot(host, - SHOST_DIF_TYPE1_PROTECTION + prot | SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 062c97b..13b6357 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.07.03-k" +#define QLA2XXX_VERSION "8.03.07.07-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/qla4xxx/Kconfig b/drivers/scsi/qla4xxx/Kconfig index 2c33ce6..0f5599e 100644 --- a/drivers/scsi/qla4xxx/Kconfig +++ b/drivers/scsi/qla4xxx/Kconfig @@ -1,6 +1,6 @@ config SCSI_QLA_ISCSI tristate "QLogic ISP4XXX and ISP82XX host adapter family support" - depends on PCI && SCSI + depends on PCI && SCSI && NET select SCSI_ISCSI_ATTRS ---help--- This driver supports the QLogic 40xx (ISP4XXX) and 8022 (ISP82XX) |
